Mirror/ardupilot
5
0
Fork 0
mirror of https://github.com/ArduPilot/ardupilot synced 2025-01-03 06:28:27 -04:00
Code Issues Packages Projects Releases Wiki Activity
57,489 Commits 71 Branches 509 Tags 752 MiB
Copter-4.4
Commit Graph

32259 Commits

Author SHA1 Message Date
Andy Piper
ebd66e88e0 AC_AutoTune: load test gains for correct axis when testing yaw D 2023-06-08 09:29:59 +10:00
Paul Riseborough
d98a60c2e1 AP_NavEKF3: Increase delta velocity bias state process noise 
Required due to state variance collapse on ground with some systems using RTK GPS.
 2023-06-08 09:29:59 +10:00
Paul Riseborough
da22519de8 AP_NavEKF3: Strengthen recovery from bad delta velocity bias learning 2023-06-08 09:29:59 +10:00
Paul Riseborough
17003ff0f5 AP_NavEKF3: Increase default value of EK3_ABIAS_P_NSE 
This is required because some hardware setups with RTK GPS have experienced a collapse of the delta velocity state variances.
 2023-06-08 09:29:59 +10:00
Paul Riseborough
9c93cb8d46 AP_NavEKF3: Retune and fix delta velocity bias state variance protection 2023-06-08 09:29:59 +10:00
Andy Piper
383297f6be AP_NavEKF: ensure gyro biases are numbers 
avoid errors during compass mot
 2023-06-08 09:29:59 +10:00
Paul Riseborough
444f90352f AP_NavEKF3: Lock in wind state estimates when using srag to dead reckon 2023-06-08 09:29:59 +10:00
Andrew Tridgell
41e922c60e AP_ICEngine: fixed a bug engine control when running 
if you have a mission item for engine control with delayed start at
height and the engine is already running them it would put the ICE
subsystem into a state where it would no longer start the engine

It was actually 2 bugs:

 - an engine control to do a height delayed start should be ignored if
   the engine is already running. This prevents an engine control to
   start the engine from stopping the engine

 - a start_chan high should always try to start the engine
   immediately, even if in the wait state
 2023-06-08 09:29:59 +10:00
Andrew Tridgell
87c767df5c AP_RCProtocol: return true on initial protocol detection 
we need to tell the IO firmware that a byte was consumed when we first
detect a protocol as otherwise the next bad byte on DSM will lock us
on the DSM port
 2023-06-08 09:29:59 +10:00
Andrew Tridgell
3b50123f18 AP_IOMCU: fixed issue with not regaining RC input 
this fixes an issue where when you lose R/C input on IOMCU that you
may not regain it when R/C comes back.

The issue stems from us still processing the DSM uart when we are
using the SD3 "SBUS" uart for RC input, and still doing the switch of
the SD3 config every 2 seconds.

When we are not searching for a new protocol we should not be changing
UART config
 2023-06-08 09:29:59 +10:00
Andrew Tridgell
784bfb53f2 AP_NavEKF3: handle core setup failure 
ensure num_cores is left as zero so that calls such as Log_Write don't
de-reference nullptr
 2023-06-08 09:29:59 +10:00
Andrew Tridgell
259e51e0e8 AP_NavEKF2: handle core setup failure 
ensure num_cores is left as zero so that calls such as Log_Write don't
de-reference nullptr
 2023-06-08 09:29:59 +10:00
Andrew Tridgell
2bbffdd6c6 AP_Param: added set() to AP_Enum 2023-06-08 09:29:59 +10:00
Peter Barker
38279fc5dd AP_Logger: do not rotate logs when disarming if we are replay-logging 2023-06-08 09:29:59 +10:00
Andrew Tridgell
e3537cb01d AP_Logger: added LOG_DARM_RATEMAX 
this sets the logging rate max when disarmed. In combination with
LOG_DISARMED=3 it gives a very nice setup to get always on logging
with very little addition to the log sizes. It is particularly useful
in combination with LOG_REPLAY=1
 2023-06-08 09:29:59 +10:00
Andrew Tridgell
1c78e4f7f9 AP_Logger: added LOG_DISARMED=3 
when LOG_DISARMED is set to 3 then we log while disarmed but if we
reboot without ever arming the log is discarded. This allows for using
LOG_DISARMED without filling the microSD.
 2023-06-08 09:29:59 +10:00
Andrew Tridgell
f69188d43a AP_Logger: use AP_Enum for log_disarmed 2023-06-08 09:29:59 +10:00
Henry Wurzburg
b23b6cd4bf AP_HAL_ChibiOS: Add SpeedyBeeF405WING 2023-06-08 09:29:59 +10:00
Andy Piper
69c0b1c567 AP_HAL_ChibiOS: correct locking on LED thread 2023-05-28 07:53:16 +10:00
Andy Piper
e8d1afd108 AP_HAL_ChibiOS: move LED processing to a separate thread 
LED processing on a separate thread allows much longer LED lengths to be handled without
compromising dshot timing or timeouts. The thread is also run at a lower priority to
reflect its lack of flight criticality
 2023-05-28 07:53:16 +10:00
Andy Piper
f97cd5c5ab AP_HAL: add helper functions for LEDs 
add PRIORITY_LED for led output thread
 2023-05-28 07:53:16 +10:00
Andy Piper
c042577827 AP_HAL_ChibiOS: reduce IMU SPI low speed to 1Mhz to avoid chip initialization issues 2023-05-25 18:12:00 +01:00
Andy Piper
d1600d3bf7 AP_HAL_ChibiOS: FoxeerH743 GA release 2023-05-24 17:21:41 +10:00
Andy Piper
9afcc8cf24 AP_HAL_ChibiOS: update MambaF405v2 for ICM42688, bdshot and DMA on UART1 2023-05-24 17:20:05 +10:00
Andy Piper
a667e3728c AP_HAL_ChibiOS: add BMI270 and ICM42688 to FlywooF745 2023-05-24 17:20:05 +10:00
Andy Piper
d5535cc0cf AP_HAL_ChibiOS: remove erroneous FlywooF745v2 2023-05-24 17:20:05 +10:00
Andy Piper
3ec036c4ea AP_HAL_ChibiOS: hwdef for FlywooF745v2 
Add SPL06 baro to FlywooF745v1
 2023-05-24 17:20:05 +10:00
Paul Riseborough
3c99766a5a AP_NavEKF3: Improve protection against GPS glitches during yaw alignment 2023-04-21 09:48:59 +10:00
Paul Riseborough
007bc804bd AP_NavEKF3: Reduce use of GSF yaw for planes with no compass 2023-04-21 09:48:59 +10:00
Andy Piper
27628099ce AP_HAL_ChibiOS: hwdef for MatekF405-TE/VTOL including bdshot 2023-04-21 09:48:59 +10:00
bugobliterator
42d21ab9bc AP_InertialSensor: fix hardfault in BatchSampler 2023-04-21 09:48:59 +10:00
Peter Barker
f3502a71e9 AP_InertialSensor: correct access beyond array in Ins TCal 2023-04-21 09:48:59 +10:00
Peter Barker
aecffd2778 SimOnHW: correct compilation on CubeOrangePlus 
this was at 2 to reduce CPU load.

But particularly when CubeOrangePlus is playing around with auxiliary IMUs we really want to be running on SimOnHardware just what we're running on the normal firmware.  We can find CPU cycles elsewhere....
 2023-04-21 09:48:59 +10:00
Andy Piper
3e83d40bd8 AP_HAL_ChibiOS: ensure that DMA source is correct on DMA send for rcout 2023-03-26 16:46:53 +11:00
Andy Piper
aabfce2099 AP_HAL_ChibiOS: ensure the rcout TIM_UP DMA request source is re-instated after cancellation 
This fixes a bug in bdshot whereby dma cancellation could result in the wrong DMA channel
being used for dshot output and hence motors stopping
 2023-03-26 16:46:51 +11:00
Andrew Tridgell
7527c6e278 HAL_ChibiOS: support starting the clock at non-zero 
for testing time wrap bugs
 2023-03-26 16:46:47 +11:00
Andrew Tridgell
c55a2916f6 HAL_ChibiOS: switched to 64 bit maths for DShot timings 
this fixes a timer wrap bug at 71 minutes after boot that impacts
bdshot
 2023-03-26 16:46:44 +11:00
bugobliterator
b9e9d4cc4f AP_InertialSensor: fix duplicate sensor detection for AUX sensors 2023-03-24 11:55:45 +11:00
bugobliterator
f88db74356 AP_HAL_ChibiOS: add support for initialising extra sensors as AUX 2023-03-24 11:55:45 +11:00
bugobliterator
6eaa05960f AP_InertialSensor: increase the temp tolerance for INV2 driver for fifo reset 2023-03-23 08:00:05 +11:00
bugobliterator
deeeb4134c AP_NavEKF3: use INS_MAX_INSTANCES instead of MAX_EKF_CORES for IMU mask 2023-03-21 10:04:16 +11:00
bugobliterator
08bea2fcd2 AP_InertialSensor: move from INS_ top level parameters to INS 2023-03-21 10:04:16 +11:00
bugobliterator
e7533c006b SITL: add support for auxiliary IMUs 2023-03-21 10:04:16 +11:00
bugobliterator
14ae431056 AP_DAL: use MAX_EKF_CORES instead of INS_MAX_INSTANCES in ekf_low_time_remaining 2023-03-21 10:04:16 +11:00
bugobliterator
f3dc4216d2 AP_HAL_ChibiOS: allow instantiation of upto 5 IMUs on CubeOrangePlus 2023-03-21 10:04:16 +11:00
bugobliterator
4e93e99fe5 AP_NavEKF: Five IMUs need slightly more stack space with GCC 6.3.1 
The extra space is take by the inactive sensor bias state code.
 2023-03-21 10:04:16 +11:00
bugobliterator
10439cc42e AP_InertialSensor: add support for extra Aux IMUs 2023-03-21 10:04:16 +11:00
Peter Barker
1cd3e7327d AP_EFI: add defines for Lutan and MegaSquirt 2023-03-21 09:01:13 +11:00
Peter Barker
615f36f8a0 AP_UAVCAN: tidy AP_EFI defines 2023-03-21 09:01:13 +11:00
Peter Barker
1e38200293 AP_PiccoloCAN: tidy AP_EFI defines 2023-03-21 09:01:13 +11:00
Peter Barker
593983df7a AP_EFI: tidy AP_EFI defines 2023-03-21 09:01:13 +11:00
Peter Barker
e76462f005 AP_OSD: move OSD minimizement to minimize_features.inc 2023-03-21 08:47:53 +11:00
Peter Barker
8278d5ad76 AP_HAL_ChibiOS: move OSD minimizement to minimize_features.inc 2023-03-21 08:47:53 +11:00
Peter Barker
1ffc5d2faa AP_OSD: add and use AP_OSD_config.h 2023-03-21 08:47:53 +11:00
Peter Barker
6ebd73f144 AP_RCTelemetry: add and use AP_RCTelemetry_config.h 2023-03-21 08:47:53 +11:00
Peter Barker
35e3dcd83b AP_RCProtocol: HAL_LOGGING_ENABLED in place of checking build types 
We don't care how logging works, just that it does
 2023-03-21 08:31:27 +11:00
Michael Oborne
76beaeab64 CubeOrangePlus-SimOnHardWare: add support 2023-03-20 10:09:31 -07:00
Henry Wurzburg
ed7a622928 AP_Arming:correct RUDDER_ARMING description 2023-03-20 10:03:39 -07:00
Henry Wurzburg
0a96f037f5 AP_Scripting:provide altitude loss safety abort for plane aerobatics 2023-03-20 04:48:57 -07:00
QioTek
011fdf6e2b AP_RAMTRON: added PB85RS128C and PB85RS2MC 2023-03-19 17:22:53 +11:00
Peter Barker
8e15b2f349 AP_Mission: correct missing transitive include problem 2023-03-19 09:08:41 +11:00
Peter Barker
d200ed1b08 AP_HAL_ChibiOS: correct defaulting of camera backends in minimize_features.inc 2023-03-19 09:08:41 +11:00
Peter Barker
b850c9cb16 AP_Notify: correct config boards include 
Important to include AP_HAL_Boards.h directly, rather than relying on someone else having done it or getting it transitively
 2023-03-19 09:08:41 +11:00
Peter Barker
59af9436db AP_Gripper: correct config boards include 
Important to include AP_HAL_Boards.h directly, rather than relying on someone else having done it or getting it transitively
 2023-03-19 09:08:41 +11:00
Peter Barker
84bf020897 AP_GPS: correct config boards include 
Important to include AP_HAL_Boards.h directly, rather than relying on someone else having done it or getting it transitively
 2023-03-19 09:08:41 +11:00
Peter Barker
191e5eb9c9 AP_Generator: correct config boards include 
Important to include AP_HAL_Boards.h directly, rather than relying on someone else having done it or getting it transitively
 2023-03-19 09:08:41 +11:00
Peter Barker
48544e3e70 AP_Camera: correct config boards include 
Important to include AP_HAL_Boards.h directly, rather than relying on someone else having done it or getting it transitively
 2023-03-19 09:08:41 +11:00
Andrew Tridgell
0489323551 HAL_ChibiOS: Revert "HAL_ChibiOS: fix a memory corruption bug on STM32H757" 
This reverts commit 63633368f5.

this broke CAN1 on some H743 boards
 2023-03-19 07:17:28 +11:00
Randy Mackay
e5be8e9bf0 AP_Scripting: copter deadreckoning lua check fixes 2023-03-18 08:55:21 +09:00
Randy Mackay
3d39f9bb20 AP_Scripting: copter deadreckon applet gets param desc and md 2023-03-18 08:55:21 +09:00
Randy Mackay
bf0d096276 AP_Scripting: copter deadreckoning moved to applet directory 2023-03-18 08:55:21 +09:00
Andrew Tridgell
63633368f5 HAL_ChibiOS: fix a memory corruption bug on STM32H757 
this fixes an issue where a variable in SRAM1 gets set to a bad value
when we reset AHB1 with the top bit (a reserved bit)

the bug was only reproducible with this particular commit:

https://github.com/tridge/ardupilot/commits/cubeorangplus-crash-boot-bisect

but likely is just luck that it triggered on that commit. In this
instance it triggered as AP_OSD::singleton was reset to non-nullptr,
causing a panic() in AP_OSD::AP_OSD()

compiler was gcc 10.2-2020-q4
 2023-03-18 08:35:51 +11:00
Andrew Tridgell
32578b796b hwdef: fixed polarity of VDD_5V_PERIPH_EN on several boards 
we can tell these are incorrect as they init to LOW, and previously we
didn't have handling of VDD_5V_PERIPH_EN, so we know that LOW is
enabled or the boards would not have worked

this fixes GPS on Pixhawk1
 2023-03-17 17:40:51 +11:00
Randy Mackay
5b96998e62 AP_Mission: add camera zoom and focus support 
also image-start-capture, video-start-capture, video-stop-capture
 2023-03-16 07:47:01 +09:00
Randy Mackay
a3e3e5fd2d GCS_MAVLink: send mav-cmd-set-camera-zoom to AP_Camera 
also send focus and image capture
 2023-03-16 07:47:01 +09:00
Randy Mackay
227daf31f7 AP_Camera: support mav-cmd-set-camera-zoom from GCS 
also support focus and image capture commands
 2023-03-16 07:47:01 +09:00
Randy Mackay
267f459c7e AP_Camera: remove unnecessary includes 2023-03-16 07:47:01 +09:00
Randy Mackay
a8b9b2742d GCS_MAVLink: move camera command handling to AP_Camera 2023-03-16 07:47:01 +09:00
Randy Mackay
9ccf08a0f8 AP_Camera: add handle_command_long 2023-03-16 07:47:01 +09:00
Peter Barker
3bc42b888f AP_EFI: use uint16_t to store offset 
prevents infinite loop if there are exactly 255 bytes ready to read
 2023-03-15 13:34:17 -07:00
Peter Barker
440db27807 AP_RCProtocol: correct use of MAX_CHANNELS in SRXL2 
This is a little all over the place.  Safe, but ARRAY_SIZE ensures correctness, and we save memory...
 2023-03-15 13:33:45 -07:00
Peter Barker
d5bca05fb6 AP_RCProtocol: SRXL2 uses own define for max-channels 
Different protocol, different count.
 2023-03-15 13:33:45 -07:00
Tom Pittenger
6b4cf06243 RC_Channel: rename Aux SW for AUTO_VTOL to PLANE_AUTO_L:AND_ABORT 2023-03-15 13:31:43 -07:00
Rhys Mainwaring
c4a86919bb AP_WindVane: use body frame when setting apparent wind in sitl physics backend 
- Change behaviour to expect apparent wind in body rather than NED frame.
- Remove dependency on AP::ahrs().yaw.

Signed-off-by: Rhys Mainwaring <rhys.mainwaring@me.com>
 2023-03-15 12:58:49 +00:00
Peter Barker
9d099fbcd5 AP_RCProtocol: add option to not include SRXL in build 2023-03-15 22:45:23 +11:00
Peter Barker
1c5f5b6ef2 AP_HAL_ChibiOS: add option to not include SRXL in build 2023-03-15 22:45:23 +11:00
Andrew Tridgell
d659642826 SITL: prevent a conflict with a _serialize() macro on cygwin 
some cygwin versions define a macro _serialize with 1 argument
 2023-03-15 19:32:22 +11:00
Pierre Kancir
f0777b5cb0 SITL: constraint SITL rover to 360deg/s yaw rate on ackerman 
This prevent the gsf to blow up due to the rover reaching 1042 deg/s yaw rate.
 2023-03-15 19:31:26 +11:00
Andrew Tridgell
3e2fdc7a0d hwdef: added rGNSS GPS peripheral 2023-03-15 19:08:53 +11:00
Andrew Tridgell
d29d4d97e7 hwdef: added rFCU board 2023-03-15 19:08:53 +11:00
Andrew Tridgell
91227433e9 HAL_ChibiOS: support VDD_5V_PERIPH_EN with active high 2023-03-15 19:08:53 +11:00
Andrew Tridgell
34a52142c8 AP_InertialSensor: added support using the 2nd IMU for heater control 2023-03-15 19:08:53 +11:00
Andrew Tridgell
eb4f544535 AP_BoardConfig: support multiple heater pins 2023-03-15 19:08:53 +11:00
Peter Barker
a32180f709 AP_Generator: rename fuel_remain_pct to fuel_remain_scale 2023-03-15 19:08:18 +11:00
Peter Barker
6bc9b7c435 AP_BattMonitor: rename fuel_remain_pct to fuel_remain_scale 2023-03-15 19:08:18 +11:00
Peter Barker
144c3ef42c AP_HAL_ChibiOS: add and use option to compile SLCAN support out of code 2023-03-15 19:08:09 +11:00
Peter Barker
c1c8158687 AP_CANManager: add and use option to compile SLCAN support out of code 2023-03-15 19:08:09 +11:00
AerofoxTech
8395f48ec1 hwdef: add a new air speed module for Aerofox 2023-03-15 19:07:00 +11:00
Iampete1
8bd374d835 Filter: HarmonicNotch: update FREQ description 2023-03-15 18:53:55 +11:00
Andy Piper
d565a378b7 AP_BattMonitor: support configuring battery #2 in hwdef 2023-03-15 18:51:37 +11:00
Andy Piper
7a85121daf AP_HAL_ChibiOS: add second battery sensor to KakuteH7v2 
correct BATT2 hwdefs for various boards
 2023-03-15 18:51:37 +11:00
Tom Pittenger
4a2cbf17f9 AP_NMEA_Output: fix GPGGA hdop, fix, sats 2023-03-14 12:45:47 -07:00
Liam
41ba830008 AP_NMEA_Output: UTC time decimal places, gps fix type, number of satellites and hdop. 2023-03-14 12:45:47 -07:00
Tom Pittenger
10f7a363ed AP_Scripting: bump up SCR HEAP SIZE for large RAM devices 2023-03-14 06:57:21 -07:00
Peter Barker
8e1decc730 AP_Scripting: correct compilation when AP_EFI_Scripting is not enabled 2023-03-14 12:09:26 +11:00
Peter Barker
3eb9515aaf AP_EF: correct builds when AP_EFI_ENABLED is false 
dronecan backend was not checking for HAL_EFI_ENABLED
 2023-03-14 12:09:26 +11:00
Randy Mackay
c039c349e3 AP_Terrain: terrain offset max default to 30m 2023-03-14 11:59:49 +11:00
Peter Barker
9f3693b5a2 AP_HAL_ChibiOS: remove mavlink camera from minimized boards 2023-03-14 11:24:47 +11:00
Andy Piper
0f6d62c196 AC_AutoTune: add option for tuning yaw D-term 
don't touch yaw D or FLTE when tuning the other
make yaw D tune an "axis"
 2023-03-14 11:01:31 +11:00
Henry Wurzburg
b432222d42 RC_Channel: add AUTO VTOL landing abort AUX sw 2023-03-14 10:52:23 +11:00
Peter Barker
1cdcc0b5f1 SITL: add documentation for SIM_OPOS* and SIM_FLOAT_EXCEPT 2023-03-14 10:44:28 +11:00
Peter Barker
b070217308 AP_Generator: add defines for generator backends 2023-03-14 10:34:05 +11:00
murata
9836b7c549 AP_Notify: Use the number of arrays 2023-03-13 10:43:15 -07:00
Peter Barker
5576595006 AP_HAL_ChibiOS: specify AP_EXTERNALAHRS_ENABLED for periph in chibios_hwdef.py 2023-03-12 09:35:35 +11:00
Peter Barker
f476a47228 AP_ExternalAHRS: specify AP_EXTERNALAHRS_ENABLED for periph in chibios_hwdef.py 2023-03-12 09:35:35 +11:00
Peter Barker
1b75f564f0 AP_HAL_ChibiOS: specify compass feature enables for periph in chibios_hwdef.py 2023-03-12 09:35:35 +11:00
Peter Barker
4755f76126 AP_Compass: specify compass feature enables for periph in chibios_hwdef.py 2023-03-12 09:35:35 +11:00
Peter Barker
48ec224b8c AP_HAL_ChibiOS: specify AP_BATTERY_ESC_ENABLED for periph in chibios_hwdef.py 2023-03-12 09:35:35 +11:00
Peter Barker
fab230cd50 AP_BattMonitor: specify AP_BATTERY_ESC_ENABLED for periph in chibios_hwdef.py 2023-03-12 09:35:35 +11:00
Peter Barker
5ad5605bc8 AP_HAL: specify HAL_SUPPORT_RCOUT_SERIAL for periph in chibios_hwdef.py 2023-03-12 09:35:35 +11:00
Peter Barker
f58f8841a1 AP_HAL_ChibiOS: specify HAL_SUPPORT_RCOUT_SERIAL for periph in chibios_hwdef.py 2023-03-12 09:35:35 +11:00
Peter Barker
9fd72b6a68 AP_HAL: specify AP_STATS_ENABLED for periph in chibios_hwdef.py 2023-03-12 09:35:35 +11:00
Peter Barker
18b574a400 AP_HAL_ChibiOS: specify AP_STATS_ENABLED for periph in chibios_hwdef.py 2023-03-12 09:35:35 +11:00
Peter Barker
806f0bf97a AP_HAL_ChibiOS: specify HAL_GENERATOR_ENABLED for periph in chibios_hwdef.py 2023-03-12 09:35:35 +11:00
Peter Barker
89a77f84f1 AP_Generator: specify HAL_GENERATOR_ENABLED for periph in chibios_hwdef.py 2023-03-12 09:35:35 +11:00
Peter Barker
56d6acf985 AP_Notify: remove pointless zeroing of memory 
this is static memory
 2023-03-12 08:34:05 +11:00
Andrew Tridgell
c35d1bd82e StorageManager: fixed startup crash 
this crash was caused by AP_UAVCAN_DNA_Server declaring a storage
object on the stack, which meant file was not initialised to nullptr.
 2023-03-12 07:15:01 +11:00
Tom Pittenger
d76901bd41 AP_Mission: jumptag optimize for sd card 2023-03-11 14:02:59 +11:00
Peter Barker
06e20761de SITL: improve IE24 simulated tank pressure 
this is simply the inverse of what the flight code does
 2023-03-11 11:50:20 +11:00
Peter Barker
e715e1e14e AP_Logger: factor Write_PSC[NED] methods to save bytes 2023-03-10 14:47:33 -08:00
Tom Pittenger
87cb40798f AP_Scripting: add docs to FWVersion:type() 2023-03-10 14:45:58 -08:00
Andrew Tridgell
615838a7d4 AP_Scripting: ensure new user data is zero 
this prevents use of uninitialised data for user objects created in
lua, giving more predictable behaviour
 2023-03-10 14:13:55 +11:00
Andrew Tridgell
c00e047d87 AP_Scripting: added mission_spiral.lua example 
useful for creating very large missions with a distinctive pattern
 2023-03-10 14:13:55 +11:00
Andrew Tridgell
ced130839c AP_Arming: check for failure to load mission.stg 2023-03-10 14:13:55 +11:00
Andrew Tridgell
86cf63fca4 AP_BoardConfig: add BRD_SD_MISSION parameter 2023-03-10 14:13:55 +11:00
Andrew Tridgell
9cef639a97 AP_Mission: support storage on microSD using mission.stg 2023-03-10 14:13:55 +11:00
Andrew Tridgell
182ab996b1 StorageManager: support microSD for additional storage 2023-03-10 14:13:55 +11:00
Peter Barker
10cb5d2151 hwdef: stop minimizing Nucleo-L496 - it's an AP_Periph 
minimized builds and AP_Periph don't make sense together
 2023-03-10 10:04:12 +11:00
Peter Barker
e20f8f5dcc AP_Airspeed: save some bytes by making conversion structure static 2023-03-10 08:49:36 +11:00
Peter Barker
b52f54d480 AP_HAL_ChibiOS: add defines for all battery backends 2023-03-10 08:48:24 +11:00
Peter Barker
85501f8219 AP_BattMonitor: add defines for all battery backends 2023-03-10 08:48:24 +11:00
Peter Barker
ff0c4133c6 AP_Torqeedo: add and use AP_Generator_config.h 2023-03-10 08:48:24 +11:00
Peter Barker
adc4bf66f8 AP_Generator: add and use AP_Generator_config.h 2023-03-10 08:48:24 +11:00
Peter Barker
b931617650 AP_ESC_Telem: add and use an AP_ESC_Telem_config.h 2023-03-10 08:48:24 +11:00
Randy Mackay
a56b474b4a AP_Mission: remove unused do-control-video 2023-03-09 12:24:05 +11:00
Randy Mackay
a0723e6ef5 AP_Mission: fix ap-camera-enabled fallthrough 2023-03-09 12:24:05 +11:00
Peter Barker
2f95c5fa29 AP_Camera: save some bytes 2023-03-09 09:28:19 +11:00
Peter Barker
b55664034f GCS_MAVLink: use GCS_MAVLINK& when routing 2023-03-08 19:30:22 +11:00
Peter Barker
1035ec9f31 hwdef: skyviper can only have a mavlink-enabled camera 2023-03-08 19:11:30 +11:00
Peter Barker
86930592c4 AP_Camera: add and use AP_CAMERA_SERVO_ENABLED 2023-03-08 19:11:30 +11:00
Peter Barker
dea34086ac AP_Camera: add and use AP_CAMERA_RELAY_ENABLED 2023-03-08 19:11:30 +11:00
Peter Barker
5afbaea30b AP_Camera: tidy Solo Camera configuration 2023-03-08 19:11:30 +11:00
Peter Barker
020ef6d33a AP_Camera: add and use AP_CAMERA_MAVLINK_ENABLED 2023-03-08 19:11:30 +11:00
Peter Barker
9cf45f076b AP_HAL_ChibiOS: add and use AP_CAMERA_MOUNT_ENABLED 2023-03-08 19:11:30 +11:00
Peter Barker
a0d4706643 AP_Camera: add and use AP_CAMERA_MOUNT_ENABLED 2023-03-08 19:11:30 +11:00
Peter Barker
74d316f606 AP_Notify: disable ProfiLED SPI by default 
this requires a SPI profiled line to function.  Unless that exists in the board's hwdef this driver can do nothing.  So require those drivers to turn the device on with a define, saving bytes in many places
 2023-03-07 22:51:43 +11:00
Peter Barker
f353241375 AP_HAL_ChibiOS: disable ProfiLED SPI by default 
this requires a SPI profiled line to function.  Unless that exists in the board's hwdef this driver can do nothing.  So require those drivers to turn the device on with a define, saving bytes in many places
 2023-03-07 22:51:43 +11:00
Bob Long
ddd2d92d39 AP_EFI lua: add enum docs 
Co-authored-by: Peter Hall <33176108+IamPete1@users.noreply.github.com>
 2023-03-07 20:35:13 +09:00
Andrew Tridgell
4ca0a0a997 AP_OpenDroneID: fixed mavlink enum 2023-03-07 20:35:13 +09:00
Bob Long
3616b41afc AP_EFI: use is_zero for fuel pressure 
This is clearer than pragma shenanigans, and makes this consistent with
the the newly-added ignition_voltage handling above.
 2023-03-07 20:35:13 +09:00
Bob Long
74279d9b32 AP_Scripting: add fuel_pressure_status binding 2023-03-07 20:35:13 +09:00
Bob Long
8c335be045 AP_EFI: added fuel pressure 2023-03-07 20:35:13 +09:00
Leonard Hall
6344faeb29 AC_WPNav: Provide terrain altitude for surface tracking 2023-03-07 13:41:35 +11:00
Peter Barker
518fece88d AP_Mount: remove redundant constructors 
just copy in the one from the parent class
 2023-03-07 13:40:54 +11:00
Andrew Tridgell
9cda7b5ccc AP_Compass: drop MMC5xx3 sample rate to 100Hz 
this was consuming too much of the I2C bus sampling at 1kHz
 2023-03-06 17:24:29 -08:00
Tom Pittenger
3c65b5e5a0 RC_Channel: add AUX_FUNC::BATTERY_MPPT_ENABLE 2023-03-07 11:42:24 +11:00
Tom Pittenger
f413f82345 AP_BattMonitor: add external MPPT on-off control 2023-03-07 11:42:24 +11:00
Henry Wurzburg
eeb72637ec AP_GPS:make Unicore reset to rover in all cases 2023-03-07 10:57:20 +11:00
Iampete1
77540dff07 AP_inertialSensor: BatchSampler: add enabled and initalised getters 2023-03-07 10:56:16 +11:00
Iampete1
89e5a7a300 AP_Arming: INS: add batchsampler init check 2023-03-07 10:56:16 +11:00
Andy Piper
3607709d16 AP_HAL_ChibiOS: bdshot version of Pixhawk6C 2023-03-07 10:35:08 +11:00
Andy Piper
7cdbc6169f AP_HAL_ChibiOS: bdshot version of QioTekZealotH743 2023-03-07 10:35:08 +11:00
Andrew Tridgell
1d0bcbf3a1 hwdef: force enable heater on PixPilot-V6 2023-03-07 10:33:24 +11:00
Andrew Tridgell
2f1c38e13a AP_IOMCU: support forcing heater to enabled with a feature bit 2023-03-07 10:33:24 +11:00
Peter Barker
9fd4298377 AP_SerialLED: add defines for some AP_Notify LED libraries 
allow ProfiLEDs (serial and SPI) and NeoPixel to be compiled out
 2023-03-07 10:30:13 +11:00
Peter Barker
d9aa0c9cf0 AP_Notify: add defines for some AP_Notify LED libraries 
allow ProfiLEDs (serial and SPI) and NeoPixel to be compiled out
 2023-03-07 10:30:13 +11:00
Peter Barker
a647f79371 AP_HAL_ChibiOS: add defines for some AP_Notify LED libraries 
allow ProfiLEDs (serial and SPI) and NeoPixel to be compiled out
 2023-03-07 10:30:13 +11:00
Peter Hall
9ac488d500 AP_Scripting: add binding to set motors external limits 2023-03-07 10:12:30 +11:00
Peter Hall
bbb9e66196 AP_Motors: add method for scripting to set external limit flags 2023-03-07 10:12:30 +11:00
Peter Hall
23fb73085a AP_Scripting: add bindings to get throttle, forward, lateral and spool state from motors 2023-03-07 10:12:30 +11:00
Andrew Tridgell
bc3fc9a317 AP_Scripting: added bindings for motors roll, pitch, yaw outputs 2023-03-07 10:12:30 +11:00
Peter Barker
f8c2ceced7 GCS_MAVLink: add support for MAV_CMD_DO_SET_ROI_NONE 2023-03-07 08:06:01 +09:00
Andrew Tridgell
eae518329d AP_RAMTRON: added MB85RS256TY 
new 32k FRAM
 2023-03-07 07:57:46 +11:00
Andrew Tridgell
7be6fe9841 hwdef: use AP_PERIPH_PROBE_CONTINUOUS for dedicated rangefinders 
these are used with sensors that may take a long time to startup and
the delay won't cause any issues as there are no other sensors
supported
 2023-03-06 19:48:07 +11:00
Andrew Tridgell
e300db5be0 AP_RangeFinder: allow re-init if no sensors found 
needed for AP_Periph with slow startup sensors or sensors that power
on separately to the CAN node
 2023-03-06 19:48:07 +11:00
Peter Barker
05c996bfcc SITL: correct use of uninitialised stack data in SIM_Gimbal 2023-03-06 14:18:59 +11:00
Peter Barker
93cb56b5f2 AP_Mount: create and use AP_Mount_config.h 2023-03-06 14:03:00 +11:00
Andrew Tridgell
6770982a98 GCS_MAVLink: support rename in FTP 2023-03-05 09:42:48 +11:00
Andrew Tridgell
cf79843661 AP_Filesystem: support file rename 2023-03-05 09:42:48 +11:00
Iampete1
a021489580 AP_Scripting: lua_bindings: use local varable for AP_Scripting, don't get every time 2023-03-05 09:42:05 +11:00
Iampete1
36498cb4a0 AP_HAL: GPIO: PWMSource: add destructor to detach interurupt 2023-03-05 09:42:05 +11:00
Iampete1
54a9239e62 AP_Scripting: fix PWMSource deletion crash 2023-03-05 09:42:05 +11:00
Tarik Agcayazi
2bb8294685 AP_Winch: Fix baud rate handling 
Correct baud rate is 38400. Confirmed with manufacturer, and with a winch on v1.02. Also confirmed w/ manufacturer that newest winches on v1.04 also use 38400. Removed if statement forcing baud rate of 115200 to be consistent with documentation, and to avoid issues in future if manufacturer changes baud rate again.
 2023-03-04 07:59:23 +09:00
Peter Barker
6a20916a35 hwdef: adjust SkyViper config for define change 2023-03-03 20:59:06 +11:00
Peter Barker
8ccd0ccd3a AP_Winch: add and use AP_WINCH_ENABLED 2023-03-03 20:59:06 +11:00
Peter Barker
f47e60d1ea AP_HAL_ChibiOS: add and use AP_WINCH_ENABLED 2023-03-03 20:59:06 +11:00
Peter Barker
fb98ef21aa AP_Mount: replace check_instance with get_instance 2023-03-03 17:35:39 +11:00
Peter Barker
b9d68355da AP_Mission: replace check_instance with get_instance 2023-03-03 17:35:39 +11:00
Tom Pittenger
f666d2ecb3 GCS_MAVLink: constrain battery % to 0-100 2023-03-02 18:07:30 +11:00
Peter Barker
04e5b5096e AP_Mount: check array bounds when setting to default mode 
This is a public method, so needs some checking
 2023-03-02 18:07:11 +11:00
Peter Barker
8c47a3d268 AP_Mount: allow gimbals other than primary to be retracted/neutralised 2023-03-02 18:07:11 +11:00
Tom Pittenger
e346eb814c AP_UAVCAN: add GPS-out 2023-03-02 09:22:15 +11:00
Tom Pittenger
fe37282f77 AP_GPS: allow external libraries to detect CAN instance 2023-03-02 09:22:15 +11:00
Henry Wurzburg
7e214b2695 AP_Compass: add GPYW metadata 2023-03-02 08:37:32 +11:00
Andy Piper
69beb2d1fa AP_HAL_ChibiOS: add GOKUF405 pinout picture 2023-03-02 07:57:34 +11:00
Andy Piper
8a3ed0bb05 AP_HAL_ChibiOS: support bi-dir dshot and ELRS on Flywoo F405S AIO 2023-03-02 07:57:34 +11:00
Andy Piper
9096d45f32 AP_HAL_ChibiOS: basic support for FlywooF405S AIO 2023-03-02 07:57:34 +11:00
Andy Piper
59c59b8b28 AP_HAL_ChibiOS: support more configurations with betaflight conversion tool 2023-03-02 07:57:34 +11:00
rishabsingh3003
d084ae0153 AP_RangeFinder: Allow multiple USD-D1-CAN 2023-03-02 07:56:56 +11:00
Peter Barker
a6041f77e8 AP_HAL_ChibiOS: remove F1 special-case from compass library 
better taken care of at the hwdef level
 2023-03-01 18:28:29 +11:00
Peter Barker
252498fb29 AP_Compass: move removal of BMM150 down into hwdef 
There's no reason apart from space to not have this in
 2023-03-01 18:28:29 +11:00
Randy Mackay
d94236650a AP_Proximity: reduce SF45b mode filter to 3 elements 2023-03-01 18:22:22 +11:00
Randy Mackay
e4d60347fb Filter: implement 3 element mode filter 2023-03-01 18:22:22 +11:00
Randy Mackay
1977005bd9 AP_Camera: log image number 2023-03-01 18:18:51 +11:00
Randy Mackay
50bcf1f278 AP_Camera: frontend-backend split 
logging gets instance and shorten Pitch field name to Pit
 2023-03-01 18:18:51 +11:00
Peter Barker
349dd5089c AP_HAL_ChibiOS: replace NO_FASTBOOT with AP_FASTBOOT_ENABLED 2023-03-01 18:16:31 +11:00
Peter Barker
21836d792a AP_HAL_ChibiOS: remove calls to save_fault_watchdog if on bootloader 2023-03-01 12:01:03 +11:00
Henry Wurzburg
762e709f73 AC_Attitude:add TKOFF/LAND only weathervane option 2023-03-01 09:51:36 +11:00
Andrew Tridgell
f7be18755e AP_AHRS: fixed earth frame accel for EKF3 with significant trim 2023-02-28 17:16:39 +11:00
mateksys
673a60f1ba AP_HAL_ChibiOS:add Invensensev3 IMU support in MatekF405-Wing 2023-02-28 15:34:24 +11:00
Tom Pittenger
5498bbec33 Scripting: add bindings for jump tags 2023-02-28 12:00:18 +11:00
Tom Pittenger
1fe4b6b7e3 AP_Scripting: Add example JUMP_TAG scripts 2023-02-28 12:00:18 +11:00
Tom Pittenger
7f5222eac2 AP_Mission: add Jump_TAG hook for scripting 2023-02-28 12:00:18 +11:00
Andrew Tridgell
a0fe53414c AP_InertialSensor: removed the error count on BMI088 0xff data 
this error happens often enough that it is frustrating for users who
can't arm, which just encourages use of forced arming.

logs show this happening at a rate of once every few seconds, which
doesn't impact on the usability of the gyro (which is at 2kHz), but
does prevent arming with this error incremement
 2023-02-28 11:28:25 +11:00
Iampete1
def81b9a1a AP_DAL: populate ekf_type 2023-02-28 11:27:43 +11:00
Iampete1
e1c75e2535 AP_DAL: Compass: populate learn_offsets_enabled 2023-02-28 11:27:43 +11:00
Iampete1
b87dd8980a ChibioOS: hwdef: CUAV-X7: add note about incorrect ADC scale factor 2023-02-28 11:26:35 +11:00
Peter Barker
6c6a76bfd4 hwdef: CubeOrange: flash-from-sd-card support 2023-02-28 11:26:04 +11:00
Peter Barker
3b230c4ec0 hwdef: enable flash-from-SD on Pixhawk6X 2023-02-28 11:26:04 +11:00
Peter Barker
48639c6810 AP_HAL_ChibiOS: add SD card support to bootloader 2023-02-28 11:26:04 +11:00
Peter Barker
3e84eb2358 AP_Scheduler: rename HAL_SCHEDULER_ENABLED to AP_SCHEDULER_ENABLED 
there's AP_HAL::Scheduler which confuses this
 2023-02-28 11:26:04 +11:00
Peter Barker
e25d6bb8e4 AP_Logger: rename HAL_SCHEDULER_ENABLED to AP_SCHEDULER_ENABLED 
there's AP_HAL::Scheduler which confuses this
 2023-02-28 11:26:04 +11:00
Peter Barker
8b70587092 AP_HAL_ChibiOS: rename HAL_SCHEDULER_ENABLED to AP_SCHEDULER_ENABLED 
there's AP_HAL::Scheduler which confuses this
 2023-02-28 11:26:04 +11:00
Peter Barker
bee1f2785a AP_Filesystem: rename HAL_SCHEDULER_ENABLED to AP_SCHEDULER_ENABLED 
there's AP_HAL::Scheduler which confuses this
 2023-02-28 11:26:04 +11:00
Peter Barker
8d29116982 AP_HAL_ChibiOS: add more comments to generated hwdef.h 
End-delimiters for e.g. AP_Periph defaults etc
 2023-02-28 11:26:04 +11:00
Iampete1
e2e239dd08 AP_Motors: add logging of output throttle 2023-02-28 11:06:32 +11:00
Iampete1
a4f1951780 AP_Logger: add outout throttle to MOTB message 2023-02-28 11:06:32 +11:00
Peter Barker
6620640916 AP_OSD: move OSD minimised features to minimize_features.inc 2023-02-28 10:40:27 +11:00
Peter Barker
fe37a68266 AP_OLC: move OSD minimised features to minimize_features.inc 2023-02-28 10:40:27 +11:00
Peter Barker
f130f9afeb AP_HAL_ChibiOS: move OSD minimised features to minimize_features.inc 2023-02-28 10:40:27 +11:00
Peter Barker
bcc1670387 hwdef: remove redundant defines of OSD_PARAM_ENABLED 
these boards already get this because they're minimised
 2023-02-28 10:40:27 +11:00
Peter Barker
abd7fa11c1 AP_Notify: use simulated toshiba LED for display rather than directly 2023-02-28 10:24:43 +11:00
Peter Barker
8f7f0d5e72 SITL: add and use SIM_RGBLED 2023-02-28 10:24:43 +11:00
Peter Barker
d56883ac7a AP_Notify: fix SerialLED simulation 
Not checking for events makes window managers annoyed
 2023-02-28 10:24:43 +11:00
Pierre Kancir
f84433e5ba AP_UAVCAN: change isnanf for isnan 2023-02-27 04:15:24 -08:00
Pierre Kancir
8d962f915e AP_GPS: change isnanf for isnan 2023-02-27 04:15:24 -08:00
Pierre Kancir
ca6a804f28 AP_BattMonitor: change isnanf for isnan 2023-02-27 04:15:24 -08:00
Peter Barker
d72d02ca47 AP_HAL_ChibiOS: remove convenience debug code based on new define 
bootloaders (at least the ones that need to fit into 16kB pages) don't really have the space for this sort of debug.

I figure if you're debugging a bootloader fault you probably have the know-how to get his information yourself based on the code now being excluded, or add it back in.
 2023-02-26 17:20:23 +11:00
Peter Barker
44bf0ec1a7 AP_Mount: Gremsy uses _link.send_message(id, buffer) to send set-attitude 2023-02-25 17:41:44 +11:00
Peter Barker
adb364cd98 GCS_MAVLink: have GCS_MAVLINK::send_message(id, buffer) check size 2023-02-25 17:41:44 +11:00