Andrew Tridgell
f40e68011b
Plane: compensate forward throttle for battery voltage drop
2020-05-11 17:59:46 +10:00
Andrew Tridgell
00585ebc3f
Plane: fixed flaperon auto-trim
...
fixed direction of flaperon automatic trim with SERVO_AUTO_TRIM
2020-05-11 17:57:35 +10:00
Andrew Tridgell
62ff0a5d4f
Plane: fixed plane landing gear to obey LGR_OPTIONS bits
...
we forced landing gear retract/deploy on takeoff and landing when we
should be following the options bits
2020-05-11 17:56:23 +10:00
Andrew Tridgell
ff400243e0
Plane: added a new TAKEOFF flight mode
...
takeoff then circle in direction of takeoff
2019-10-17 12:19:43 +11:00
Andrew Tridgell
7751352a86
Plane: implement VTOL landing for AFS termination
...
this allows for vertical landing as an AFS_TERM_ACTION
2019-09-12 09:59:17 +10:00
IamPete1
27286b659b
Plane: servos: update dspoiler auto trim
2019-09-01 09:00:16 +10:00
IamPete1
76663d66e8
Plane: support bicopter tiltrotors
2019-07-02 10:15:17 +10:00
IamPete1
fb4b092917
plane: restore thr_min behaviour and update description
2019-04-23 09:39:45 +10:00
Tom Pittenger
ade6281923
Plane: use #if ADVANCED_FAILSAFE == ENABLED just like Rover and Copter
2019-04-03 17:46:50 -07:00
IamPete1
520f5f7894
Plane: add crow flap options paramiter
2019-04-04 09:18:11 +11:00
Tom Pittenger
0270c57530
Plane: massive refactor and creation of Mode class
2019-04-02 16:28:52 +11:00
Andrew Tridgell
954b6ae791
Plane: fixed WAIT_ALTITUDE wiggle
...
when wiggle value is zero servos should be neutral
2019-03-30 10:49:41 +11:00
Peter Barker
ca7566fff9
Plane: use enum class for ArmingMethod and ArmingRequired
2019-03-12 19:48:14 +11:00
Andrew Tridgell
c290b1f3b5
Plane: fixed servo jitter due to airspeed estimate from throttle
...
when we have no other airspeed source and we are armed we get airspeed
from throttle. the default setting of k_throttle in the radio code
caused an oscillation of the value used in the airspeed estimate, each
time a RC frame came in.
2019-02-22 14:42:17 +11:00
Mark Whitehorn
95b3a5bacd
ArduPlane: implement hover throttle learning for quadplanes
...
disable by default
check quadplane.enable in update_hover_learn
2019-02-16 19:04:13 -08:00
Andrew Tridgell
5dbf603450
Plane: separate out slew limit logic for left/right throttles
2019-02-03 05:06:37 -08:00
IamPete1
eaed0a2d47
Plane: make rudder differnal thrust global
2019-01-15 10:19:19 +11:00
Andrew Tridgell
6c7af3830b
Plane: apply throttle slew to dual-motor setups
...
thanks to Alex for noticing this issue
2018-12-04 09:08:31 +11:00
Andrew Tridgell
4d8fbdfcfd
Plane: fixed spoiler left rudder order
...
thanks to @jgilbertfpv for noticing
2018-11-20 20:10:00 +11:00
Andrew Tridgell
1d00d26b9e
Plane: added parameters for crow flaps
...
DSPOILER_CROW_W1 and DSPOILER_CROW_W2 for inner and outer control
surfaces
2018-11-20 10:00:38 +11:00
jgilbertfpv
4d6547c533
Plane: added crow brakes and diff. spoilers
...
added crow braking via flap channel to differential spoilers and
reversed dspoiler outputs because having the inner elevon go up and
outer go down causes tip stall. now inner goes down, outer goes
up. still could use a percentage adjustment to change how much throw
each surface gets when using flap input.
2018-11-20 10:00:38 +11:00
Andrew Tridgell
da69bf3391
Plane: added an abstraction for reverse thrust
...
use have_reverse_thrust() and get_throttle_input()
2018-11-16 08:33:35 +11:00
Eugene Shamaev
01178a75e9
Plane: added landing gear support
2018-11-09 14:35:14 +11:00
Andrew Tridgell
2d3942222b
Plane: handle reverse thrust in AFS failsafe
...
and zero differential thrust
2018-09-13 08:15:02 +10:00
Michael du Breuil
e4bbcd5ee3
Plane: Don't initilize motors with a trim value
2018-08-23 13:19:08 +10:00
Michael du Breuil
fa1ad09a3b
Plane: Remove unneeded rudder set
2018-08-21 08:32:56 +10:00
Andrew Tridgell
1d675390ab
Plane: make soaring an optional build feature
...
this disables soaring on px4-v2, saving 5k of flash
This is needed to consider pr #9042 , which takes a lot of flash space
2018-07-30 13:09:15 +10:00
Andrew Tridgell
07187f7797
Plane: fixed ARMING_REQUIRE=2 for dual-motor planes
...
many thanks to Marco for finding this bug!
2018-07-18 19:58:02 +10:00
Michael du Breuil
47c0048499
Plane: Remove manual polling of flap input channel
2018-06-05 09:51:09 +10:00
Tom Pittenger
39a200b83f
Plane: allow control_mode enum to be in arbitrary order
...
never use control_mode >= BLAH. This requires the order to be important which greatly increases chance for unexpected behavior
Closes https://github.com/ArduPilot/ardupilot/issues/4656
2018-01-09 17:05:04 -08:00
Ubuntu 16.04 VM
624aef401d
Plane: Enforce THR_MIN/THR_MAX in VTOL modes
2017-12-11 22:18:39 -08:00
Guy Tzoler
a6c7890c74
Plane: use cork/push wrapper
2017-11-21 14:10:54 +11:00
Andrew Tridgell
126d5ce5d4
Plane: re-implement MIXING_OFFSET
...
this was lost in the conversion of SRV_Channels
2017-11-04 09:34:22 +11:00
Michael du Breuil
d52f5155f0
Plane: Rename rc failsafe state members
2017-11-02 16:46:08 -07:00
Andrew Tridgell
3d16ca7144
Plane: fixed MANUAL_RCMASK
...
ensure it only applies in MANUAL, and fixed input scaling in px4io
2017-09-19 17:05:56 +10:00
David Ingraham
750212eb8f
Plane: Remove deprecated control surface mixing functions
...
This commit removes the deprecated functions used for calculating elevon and vtail mixes. This code is currently unrechable.
The functions that called these were removed in PR #6546 .
2017-09-10 17:14:14 +10:00
Andrew Tridgell
cff692ca48
Plane: implement MANUAL_RCMASK
...
this replaces the functionality of the old "with input"
aileron/elevator functions, but in a much more flexible way. It means
that people who want to fly in MANAUL mode will have the ability to
have full control of trims and mixing using transmitter mixers if they
need that functionality
2017-08-01 08:25:32 +10:00
Andrew Tridgell
0266168e69
Plane: removed old elevon and vtail mixers
...
now only use the function based mixing, and auto-convert on startup
2017-08-01 08:25:32 +10:00
Andrew Tridgell
1d626db3b1
Plane: use scaled outputs for AFS failsafe
...
we need to use scaled outputs so that derived outputs (such as elevons
and vtail) have a valid input to use
2017-07-04 07:59:28 +10:00
Peter Barker
38921c4f1a
Plane: correct AFS terminate for rcin/servos split
2017-07-04 07:59:28 +10:00
Andrew Tridgell
d3f9afd4e7
Plane: fixed auto-adjustment of flaperon trim
2017-07-03 11:17:42 +10:00
Andrew Tridgell
2cb511c049
Plane: deprecate old aileron_with_input and elevator_with_input
...
these have very rarely been used and don't work well with new trimming
mechanisms. Now treat them as ordinary ailerons/elevators
2017-07-03 11:17:42 +10:00
Andrew Tridgell
51b39ea3a1
Plane: removed ancient "mix_mode" type elevon mixing
...
this has been deprecated for a long time
2017-07-03 11:17:42 +10:00
Andrew Tridgell
984e887d1d
Plane: changed differential spoilers to scaled outputs
...
this matches new elevon, vtail and flaperon code
2017-07-03 11:17:42 +10:00
Andrew Tridgell
c9e4423997
Plane: re-implement flaperons
...
implement as scaled output instead of PWM output
this will break some peoples setups, but gives much easier setup and
more consistent behaviour
2017-07-03 11:17:42 +10:00
Mark Whitehorn
dc10675965
ArduPlane: suppress differential thrust when throttle is zero
...
this prevents motors from spinning when disarming in FBWA
2017-04-28 16:08:50 -07:00
Andrew Tridgell
be1b50d6e2
Plane: support auto trim for separate elevon and vtail channels
...
this supports SERVO_AUTO_TRIM=1 for elevons and vtails setup using the
new separate functions
2017-04-24 16:26:08 +10:00
Andrew Tridgell
b4ffcfa6bd
Plane: added support for elevon and vtail servo functions
...
these make trimming and limiting servo movement easier
2017-04-24 16:26:08 +10:00
Tom Pittenger
5b47927937
Plane: pre-launch flaps incorrectly always disabled
...
Pre-launch flaps are always disabled by checking current state against zero (which it always will be) instead of the param which is what it was supposed to be checking.
2017-04-18 14:40:17 -07:00
Mark Whitehorn
7679b758b0
Plane: add parameter RUDD_DT_GAIN for dual motor tailsitter
...
controls rudder to differential thrust mixing in FW mode
2017-04-06 08:29:44 +10:00