Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Plane: added RUDDER_ONLY parameter 

this gives much easier setup for rudder only aircraft.
This commit is contained in:
Andrew Tridgell 2015-04-16 11:16:30 +10:00
parent 4fe39c67b4
commit edec706c12
5 changed files with 20 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
ArduPlane/Attitude.pde
View File

@ -968,7 +968,9 @@ static void set_servos(void)
// send values to the PWM timers for output
// ----------------------------------------
channel_roll->output();
if (g.rudder_only == 0) {
channel_roll->output();
}
channel_pitch->output();
channel_throttle->output();
channel_rudder->output();

2
ArduPlane/Parameters.h
View File

@ -136,6 +136,7 @@ public:
k_param_hil_mode,
k_param_land_disarm_delay,
k_param_glide_slope_threshold,
k_param_rudder_only,
// 100: Arming parameters
k_param_arming = 100,
@ -428,6 +429,7 @@ public:
AP_Int8 mix_mode;
AP_Int8 vtail_output;
AP_Int8 elevon_output;
AP_Int8 rudder_only;
AP_Float mixing_gain;
AP_Int8 reverse_elevons;
AP_Int8 reverse_ch1_elevon;

7
ArduPlane/Parameters.pde
View File

@ -757,6 +757,13 @@ const AP_Param::Info var_info[] PROGMEM = {
// @User: User
GSCALAR(mixing_gain, "MIXING_GAIN", 0.5f),
// @Param: RUDDER_ONLY
// @DisplayName: Rudder only aircraft
// @Description: Enable rudder only mode. The rudder will control attitude in attitude controlled modes (such as FBWA). You should setup your transmitter to send roll stick inputs to the RCMAP_YAW channel (normally channel 4). The rudder servo should be attached to the RCMAP_YAW channel as well. Note that automatic ground steering will be disabled for rudder only aircraft. You should also set KFF_RDDRMIX to 1.0. You will also need to setup the YAW2SRV_DAMP yaw damping appropriately for your aircraft. A value of 0.5 for YAW2SRV_DAMP is a good starting point.
// @Values: 0:Disabled,1:Enabled
// @User: User
GSCALAR(rudder_only, "RUDDER_ONLY", 0),
// @Param: SYS_NUM_RESETS
// @DisplayName: Num Resets
// @Description: Number of APM board resets

4
ArduPlane/failsafe.pde
View File

@ -90,7 +90,9 @@ void failsafe_check(void)
channel_pitch->output();
}
channel_throttle->output();
channel_rudder->output();
if (g.rudder_only == 0) {
channel_rudder->output();
}
// setup secondary output channels that do have
// corresponding input channels

6
ArduPlane/radio.pde
View File

@ -8,7 +8,11 @@
*/
static void set_control_channels(void)
{
channel_roll = RC_Channel::rc_channel(rcmap.roll()-1);
if (g.rudder_only) {
channel_roll = RC_Channel::rc_channel(rcmap.yaw()-1);
} else {
channel_roll = RC_Channel::rc_channel(rcmap.roll()-1);
}
channel_pitch = RC_Channel::rc_channel(rcmap.pitch()-1);
channel_throttle = RC_Channel::rc_channel(rcmap.throttle()-1);
channel_rudder = RC_Channel::rc_channel(rcmap.yaw()-1);