Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Copter: fix heli land detector and incoporate reset_I_smoothly

This commit is contained in:
bnsgeyer 2020-12-20 16:40:58 -05:00 committed by Bill Geyer
parent 09b9ad83dc
commit c75848435e
15 changed files with 18 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
ArduCopter/land_detector.cpp
View File

@ -60,8 +60,8 @@ void Copter::update_land_detector()
} else { } else {
#if FRAME_CONFIG == HELI_FRAME #if FRAME_CONFIG == HELI_FRAME
// check that collective pitch is on lower limit (should be constrained by LAND_COL_MIN) // check that collective pitch is below mid collective (zero thrust) position
bool motor_at_lower_limit = motors->limit.throttle_lower; bool motor_at_lower_limit = (motors->get_below_mid_collective() && fabsf(ahrs.get_roll()) < M_PI/2.0f);
#else #else
// check that the average throttle output is near minimum (less than 12.5% hover throttle) // check that the average throttle output is near minimum (less than 12.5% hover throttle)
bool motor_at_lower_limit = motors->limit.throttle_lower && attitude_control->is_throttle_mix_min(); bool motor_at_lower_limit = motors->limit.throttle_lower && attitude_control->is_throttle_mix_min();

2
ArduCopter/mode.cpp
View File

@ -502,7 +502,7 @@ void Mode::make_safe_spool_down()
case AP_Motors::SpoolState::SHUT_DOWN: case AP_Motors::SpoolState::SHUT_DOWN:
case AP_Motors::SpoolState::GROUND_IDLE: case AP_Motors::SpoolState::GROUND_IDLE:
// relax controllers during idle states // relax controllers during idle states
attitude_control->reset_rate_controller_I_terms(); attitude_control->reset_rate_controller_I_terms_smoothly();
attitude_control->set_yaw_target_to_current_heading(); attitude_control->set_yaw_target_to_current_heading();
break; break;

2
ArduCopter/mode_acro.cpp
View File

@ -34,7 +34,7 @@ void ModeAcro::run()
case AP_Motors::SpoolState::GROUND_IDLE: case AP_Motors::SpoolState::GROUND_IDLE:
// Landed // Landed
attitude_control->set_attitude_target_to_current_attitude(); attitude_control->set_attitude_target_to_current_attitude();
attitude_control->reset_rate_controller_I_terms(); attitude_control->reset_rate_controller_I_terms_smoothly();
break; break;
case AP_Motors::SpoolState::THROTTLE_UNLIMITED: case AP_Motors::SpoolState::THROTTLE_UNLIMITED:

4
ArduCopter/mode_acro_heli.cpp
View File

@ -53,12 +53,12 @@ void ModeAcro_Heli::run()
// Otherwise motors could be at ground idle for practice autorotation // Otherwise motors could be at ground idle for practice autorotation
if ((motors->init_targets_on_arming() && motors->using_leaky_integrator()) || (copter.ap.land_complete && !motors->using_leaky_integrator())) { if ((motors->init_targets_on_arming() && motors->using_leaky_integrator()) || (copter.ap.land_complete && !motors->using_leaky_integrator())) {
attitude_control->set_attitude_target_to_current_attitude(); attitude_control->set_attitude_target_to_current_attitude();
attitude_control->reset_rate_controller_I_terms(); attitude_control->reset_rate_controller_I_terms_smoothly();
} }
break; break;
case AP_Motors::SpoolState::THROTTLE_UNLIMITED: case AP_Motors::SpoolState::THROTTLE_UNLIMITED:
if (copter.ap.land_complete && !motors->using_leaky_integrator()) { if (copter.ap.land_complete && !motors->using_leaky_integrator()) {
attitude_control->reset_rate_controller_I_terms(); attitude_control->reset_rate_controller_I_terms_smoothly();
} }
break; break;
case AP_Motors::SpoolState::SPOOLING_UP: case AP_Motors::SpoolState::SPOOLING_UP:

2
ArduCopter/mode_althold.cpp
View File

@ -58,7 +58,7 @@ void ModeAltHold::run()
FALLTHROUGH; FALLTHROUGH;
case AltHold_Landed_Pre_Takeoff: case AltHold_Landed_Pre_Takeoff:
attitude_control->reset_rate_controller_I_terms(); attitude_control->reset_rate_controller_I_terms_smoothly();
pos_control->relax_alt_hold_controllers(0.0f); // forces throttle output to go to zero pos_control->relax_alt_hold_controllers(0.0f); // forces throttle output to go to zero
break; break;

2
ArduCopter/mode_autotune.cpp
View File

@ -60,7 +60,7 @@ void AutoTune::run()
} else { } else {
copter.motors->set_desired_spool_state(AP_Motors::DesiredSpoolState::THROTTLE_UNLIMITED); copter.motors->set_desired_spool_state(AP_Motors::DesiredSpoolState::THROTTLE_UNLIMITED);
} }
copter.attitude_control->reset_rate_controller_I_terms(); copter.attitude_control->reset_rate_controller_I_terms_smoothly();
copter.attitude_control->set_yaw_target_to_current_heading(); copter.attitude_control->set_yaw_target_to_current_heading();
float target_roll, target_pitch, target_yaw_rate; float target_roll, target_pitch, target_yaw_rate;

2
ArduCopter/mode_drift.cpp
View File

@ -98,7 +98,7 @@ void ModeDrift::run()
case AP_Motors::SpoolState::GROUND_IDLE: case AP_Motors::SpoolState::GROUND_IDLE:
// Landed // Landed
attitude_control->set_yaw_target_to_current_heading(); attitude_control->set_yaw_target_to_current_heading();
attitude_control->reset_rate_controller_I_terms(); attitude_control->reset_rate_controller_I_terms_smoothly();
break; break;
case AP_Motors::SpoolState::THROTTLE_UNLIMITED: case AP_Motors::SpoolState::THROTTLE_UNLIMITED:

2
ArduCopter/mode_flowhold.cpp
View File

@ -298,7 +298,7 @@ void ModeFlowHold::run()
FALLTHROUGH; FALLTHROUGH;
case AltHold_Landed_Pre_Takeoff: case AltHold_Landed_Pre_Takeoff:
attitude_control->reset_rate_controller_I_terms(); attitude_control->reset_rate_controller_I_terms_smoothly();
pos_control->relax_alt_hold_controllers(0.0f); // forces throttle output to go to zero pos_control->relax_alt_hold_controllers(0.0f); // forces throttle output to go to zero
break; break;

2
ArduCopter/mode_loiter.cpp
View File

@ -154,7 +154,7 @@ void ModeLoiter::run()
FALLTHROUGH; FALLTHROUGH;
case AltHold_Landed_Pre_Takeoff: case AltHold_Landed_Pre_Takeoff:
attitude_control->reset_rate_controller_I_terms(); attitude_control->reset_rate_controller_I_terms_smoothly();
loiter_nav->init_target(); loiter_nav->init_target();
attitude_control->input_euler_angle_roll_pitch_euler_rate_yaw(0.0f, 0.0f, 0.0f); attitude_control->input_euler_angle_roll_pitch_euler_rate_yaw(0.0f, 0.0f, 0.0f);
pos_control->relax_alt_hold_controllers(0.0f); // forces throttle output to go to zero pos_control->relax_alt_hold_controllers(0.0f); // forces throttle output to go to zero

2
ArduCopter/mode_poshold.cpp
View File

@ -155,7 +155,7 @@ void ModePosHold::run()
FALLTHROUGH; FALLTHROUGH;
case AltHold_Landed_Pre_Takeoff: case AltHold_Landed_Pre_Takeoff:
attitude_control->reset_rate_controller_I_terms(); attitude_control->reset_rate_controller_I_terms_smoothly();
pos_control->relax_alt_hold_controllers(0.0f); // forces throttle output to go to zero pos_control->relax_alt_hold_controllers(0.0f); // forces throttle output to go to zero
// set poshold state to pilot override // set poshold state to pilot override

2
ArduCopter/mode_sport.cpp
View File

@ -106,7 +106,7 @@ void ModeSport::run()
FALLTHROUGH; FALLTHROUGH;
case AltHold_Landed_Pre_Takeoff: case AltHold_Landed_Pre_Takeoff:
attitude_control->reset_rate_controller_I_terms(); attitude_control->reset_rate_controller_I_terms_smoothly();
pos_control->relax_alt_hold_controllers(0.0f); // forces throttle output to go to zero pos_control->relax_alt_hold_controllers(0.0f); // forces throttle output to go to zero
break; break;

2
ArduCopter/mode_stabilize.cpp
View File

@ -38,7 +38,7 @@ void ModeStabilize::run()
case AP_Motors::SpoolState::GROUND_IDLE: case AP_Motors::SpoolState::GROUND_IDLE:
// Landed // Landed
attitude_control->set_yaw_target_to_current_heading(); attitude_control->set_yaw_target_to_current_heading();
attitude_control->reset_rate_controller_I_terms(); attitude_control->reset_rate_controller_I_terms_smoothly();
break; break;
case AP_Motors::SpoolState::THROTTLE_UNLIMITED: case AP_Motors::SpoolState::THROTTLE_UNLIMITED:

4
ArduCopter/mode_stabilize_heli.cpp
View File

@ -58,12 +58,12 @@ void ModeStabilize_Heli::run()
// Otherwise motors could be at ground idle for practice autorotation // Otherwise motors could be at ground idle for practice autorotation
if ((motors->init_targets_on_arming() && motors->using_leaky_integrator()) || (copter.ap.land_complete && !motors->using_leaky_integrator())) { if ((motors->init_targets_on_arming() && motors->using_leaky_integrator()) || (copter.ap.land_complete && !motors->using_leaky_integrator())) {
attitude_control->set_yaw_target_to_current_heading(); attitude_control->set_yaw_target_to_current_heading();
attitude_control->reset_rate_controller_I_terms(); attitude_control->reset_rate_controller_I_terms_smoothly();
} }
break; break;
case AP_Motors::SpoolState::THROTTLE_UNLIMITED: case AP_Motors::SpoolState::THROTTLE_UNLIMITED:
if (copter.ap.land_complete && !motors->using_leaky_integrator()) { if (copter.ap.land_complete && !motors->using_leaky_integrator()) {
attitude_control->reset_rate_controller_I_terms(); attitude_control->reset_rate_controller_I_terms_smoothly();
} }
break; break;
case AP_Motors::SpoolState::SPOOLING_UP: case AP_Motors::SpoolState::SPOOLING_UP:

2
ArduCopter/mode_systemid.cpp
View File

@ -141,7 +141,7 @@ void ModeSystemId::run()
// init_targets_on_arming is always set true for multicopter. // init_targets_on_arming is always set true for multicopter.
if (motors->init_targets_on_arming()) { if (motors->init_targets_on_arming()) {
attitude_control->set_yaw_target_to_current_heading(); attitude_control->set_yaw_target_to_current_heading();
attitude_control->reset_rate_controller_I_terms(); attitude_control->reset_rate_controller_I_terms_smoothly();
} }
break; break;

2
ArduCopter/mode_zigzag.cpp
View File

@ -364,7 +364,7 @@ void ModeZigZag::manual_control()
FALLTHROUGH; FALLTHROUGH;
case AltHold_Landed_Pre_Takeoff: case AltHold_Landed_Pre_Takeoff:
attitude_control->reset_rate_controller_I_terms(); attitude_control->reset_rate_controller_I_terms_smoothly();
loiter_nav->init_target(); loiter_nav->init_target();
attitude_control->input_euler_angle_roll_pitch_euler_rate_yaw(0.0f, 0.0f, 0.0f); attitude_control->input_euler_angle_roll_pitch_euler_rate_yaw(0.0f, 0.0f, 0.0f);
pos_control->relax_alt_hold_controllers(0.0f); // forces throttle output to go to zero pos_control->relax_alt_hold_controllers(0.0f); // forces throttle output to go to zero