mirror of https://github.com/ArduPilot/ardupilot
AP_HAL_F4Light: build changed to use bootloader
also added generation of .apj images
This commit is contained in:
parent
3f17ac765e
commit
c41d7d9486
|
@ -128,7 +128,7 @@ SECTIONS
|
||||||
|
|
||||||
/* Uninitialized data section */
|
/* Uninitialized data section */
|
||||||
. = ALIGN(4);
|
. = ALIGN(4);
|
||||||
.bss :
|
.bss (NOLOAD):
|
||||||
{
|
{
|
||||||
/* This is used by the startup in order to initialize the .bss secion */
|
/* This is used by the startup in order to initialize the .bss secion */
|
||||||
_sbss = .; /* define a global symbol at bss start */
|
_sbss = .; /* define a global symbol at bss start */
|
||||||
|
@ -143,7 +143,7 @@ SECTIONS
|
||||||
} >RAM
|
} >RAM
|
||||||
|
|
||||||
/* User_heap_stack section, used to check that there is enough RAM left */
|
/* User_heap_stack section, used to check that there is enough RAM left */
|
||||||
._user_heap_stack :
|
._user_heap_stack (NOLOAD):
|
||||||
{
|
{
|
||||||
. = ALIGN(4);
|
. = ALIGN(4);
|
||||||
PROVIDE ( end = . );
|
PROVIDE ( end = . );
|
||||||
|
@ -163,7 +163,7 @@ SECTIONS
|
||||||
*(.mb1rodata*)
|
*(.mb1rodata*)
|
||||||
} >MEMORY_B1
|
} >MEMORY_B1
|
||||||
|
|
||||||
.ccm : {
|
.ccm (NOLOAD): {
|
||||||
. = ALIGN(4);
|
. = ALIGN(4);
|
||||||
_sccm = .;
|
_sccm = .;
|
||||||
*(.ccm)
|
*(.ccm)
|
||||||
|
|
|
@ -1,170 +0,0 @@
|
||||||
/*
|
|
||||||
*****************************************************************************
|
|
||||||
**
|
|
||||||
** File : stm32_flash.ld
|
|
||||||
**
|
|
||||||
** Abstract : Linker script for STM32F407VG Device with
|
|
||||||
** 1024KByte FLASH, 128KByte RAM
|
|
||||||
**
|
|
||||||
** Set heap size, stack size and stack location according
|
|
||||||
** to application requirements.
|
|
||||||
**
|
|
||||||
** Set memory bank area and size if external memory is used.
|
|
||||||
**
|
|
||||||
** Target : STMicroelectronics STM32
|
|
||||||
**
|
|
||||||
** Environment : Atollic TrueSTUDIO(R)
|
|
||||||
**
|
|
||||||
** Distribution: The file is distributed “as is,” without any warranty
|
|
||||||
** of any kind.
|
|
||||||
**
|
|
||||||
** (c)Copyright Atollic AB.
|
|
||||||
** You may use this file as-is or modify it according to the needs of your
|
|
||||||
** project. Distribution of this file (unmodified or modified) is not
|
|
||||||
** permitted. Atollic AB permit registered Atollic TrueSTUDIO(R) users the
|
|
||||||
** rights to distribute the assembled, compiled & linked contents of this
|
|
||||||
** file as part of an application binary file, provided that it is built
|
|
||||||
** using the Atollic TrueSTUDIO(R) toolchain.
|
|
||||||
**
|
|
||||||
*****************************************************************************
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Entry Point */
|
|
||||||
ENTRY(Reset_Handler)
|
|
||||||
|
|
||||||
/* Highest address of the user mode stack */
|
|
||||||
_estack = 0x20020000; /* end of 128K RAM */
|
|
||||||
|
|
||||||
/* Generate a link error if heap and stack don't fit into RAM */
|
|
||||||
_Min_Heap_Size = 0; /* required amount of heap */
|
|
||||||
_Min_Stack_Size = 0x800; /* required amount of stack */
|
|
||||||
|
|
||||||
/* Specify the memory areas */
|
|
||||||
MEMORY
|
|
||||||
{
|
|
||||||
FLASH (rx) : ORIGIN = 0x08020000, LENGTH = 896K
|
|
||||||
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K
|
|
||||||
MEMORY_B1 (rx) : ORIGIN = 0x60000000, LENGTH = 0K
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Define output sections */
|
|
||||||
SECTIONS
|
|
||||||
{
|
|
||||||
/* The startup code goes first into FLASH */
|
|
||||||
.isr_vector :
|
|
||||||
{
|
|
||||||
. = ALIGN(4);
|
|
||||||
KEEP(*(.isr_vector)) /* Startup code */
|
|
||||||
. = ALIGN(4);
|
|
||||||
} >FLASH
|
|
||||||
|
|
||||||
/* The program code and other data goes into FLASH */
|
|
||||||
.text :
|
|
||||||
{
|
|
||||||
. = ALIGN(4);
|
|
||||||
*(.text) /* .text sections (code) */
|
|
||||||
*(.text*) /* .text* sections (code) */
|
|
||||||
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
|
||||||
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
|
||||||
*(.glue_7) /* glue arm to thumb code */
|
|
||||||
*(.glue_7t) /* glue thumb to arm code */
|
|
||||||
*(.eh_frame)
|
|
||||||
|
|
||||||
KEEP (*(.init))
|
|
||||||
KEEP (*(.fini))
|
|
||||||
|
|
||||||
. = ALIGN(4);
|
|
||||||
_etext = .; /* define a global symbols at end of code */
|
|
||||||
} >FLASH
|
|
||||||
|
|
||||||
|
|
||||||
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
|
|
||||||
.ARM : {
|
|
||||||
__exidx_start = .;
|
|
||||||
*(.ARM.exidx*)
|
|
||||||
__exidx_end = .;
|
|
||||||
} >FLASH
|
|
||||||
|
|
||||||
.preinit_array :
|
|
||||||
{
|
|
||||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
|
||||||
KEEP (*(.preinit_array*))
|
|
||||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
|
||||||
} >FLASH
|
|
||||||
.init_array :
|
|
||||||
{
|
|
||||||
PROVIDE_HIDDEN (__init_array_start = .);
|
|
||||||
KEEP (*(SORT(.init_array.*)))
|
|
||||||
KEEP (*(.init_array*))
|
|
||||||
PROVIDE_HIDDEN (__init_array_end = .);
|
|
||||||
} >FLASH
|
|
||||||
.fini_array :
|
|
||||||
{
|
|
||||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
|
||||||
KEEP (*(.fini_array*))
|
|
||||||
KEEP (*(SORT(.fini_array.*)))
|
|
||||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
|
||||||
} >FLASH
|
|
||||||
|
|
||||||
/* used by the startup to initialize data */
|
|
||||||
_sidata = .;
|
|
||||||
|
|
||||||
/* Initialized data sections goes into RAM, load LMA copy after code */
|
|
||||||
.data :
|
|
||||||
{
|
|
||||||
. = ALIGN(4);
|
|
||||||
_sdata = .; /* create a global symbol at data start */
|
|
||||||
*(.data) /* .data sections */
|
|
||||||
*(.data*) /* .data* sections */
|
|
||||||
|
|
||||||
. = ALIGN(4);
|
|
||||||
_edata = .; /* define a global symbol at data end */
|
|
||||||
} >RAM AT> FLASH
|
|
||||||
|
|
||||||
/* Uninitialized data section */
|
|
||||||
. = ALIGN(4);
|
|
||||||
.bss :
|
|
||||||
{
|
|
||||||
/* This is used by the startup in order to initialize the .bss secion */
|
|
||||||
_sbss = .; /* define a global symbol at bss start */
|
|
||||||
__bss_start__ = _sbss;
|
|
||||||
*(.bss)
|
|
||||||
*(.bss*)
|
|
||||||
*(COMMON)
|
|
||||||
|
|
||||||
. = ALIGN(4);
|
|
||||||
_ebss = .; /* define a global symbol at bss end */
|
|
||||||
__bss_end__ = _ebss;
|
|
||||||
} >RAM
|
|
||||||
|
|
||||||
/* User_heap_stack section, used to check that there is enough RAM left */
|
|
||||||
._user_heap_stack :
|
|
||||||
{
|
|
||||||
. = ALIGN(4);
|
|
||||||
PROVIDE ( end = . );
|
|
||||||
PROVIDE ( _end = . );
|
|
||||||
. = . + _Min_Heap_Size;
|
|
||||||
. = . + _Min_Stack_Size;
|
|
||||||
. = ALIGN(4);
|
|
||||||
} >RAM
|
|
||||||
|
|
||||||
/* MEMORY_bank1 section, code must be located here explicitly */
|
|
||||||
/* Example: extern int foo(void) __attribute__ ((section (".mb1text"))); */
|
|
||||||
.memory_b1_text :
|
|
||||||
{
|
|
||||||
*(.mb1text) /* .mb1text sections (code) */
|
|
||||||
*(.mb1text*) /* .mb1text* sections (code) */
|
|
||||||
*(.mb1rodata) /* read-only data (constants) */
|
|
||||||
*(.mb1rodata*)
|
|
||||||
} >MEMORY_B1
|
|
||||||
|
|
||||||
/* Remove information from the standard libraries */
|
|
||||||
/DISCARD/ :
|
|
||||||
{
|
|
||||||
libc.a ( * )
|
|
||||||
libm.a ( * )
|
|
||||||
libgcc.a ( * )
|
|
||||||
}
|
|
||||||
|
|
||||||
.ARM.attributes 0 : { *(.ARM.attributes) }
|
|
||||||
}
|
|
|
@ -1 +1 @@
|
||||||
flash_8000000.ld
|
flash-10000.ld
|
|
@ -136,7 +136,7 @@ SECTIONS
|
||||||
|
|
||||||
/* Uninitialized data section */
|
/* Uninitialized data section */
|
||||||
. = ALIGN(4);
|
. = ALIGN(4);
|
||||||
.bss :
|
.bss (NOLOAD):
|
||||||
{
|
{
|
||||||
/* This is used by the startup in order to initialize the .bss secion */
|
/* This is used by the startup in order to initialize the .bss secion */
|
||||||
_sbss = .; /* define a global symbol at bss start */
|
_sbss = .; /* define a global symbol at bss start */
|
||||||
|
@ -151,7 +151,7 @@ SECTIONS
|
||||||
} >RAM
|
} >RAM
|
||||||
|
|
||||||
/* User_heap_stack section, used to check that there is enough RAM left */
|
/* User_heap_stack section, used to check that there is enough RAM left */
|
||||||
._user_heap_stack :
|
._user_heap_stack (NOLOAD):
|
||||||
{
|
{
|
||||||
. = ALIGN(4);
|
. = ALIGN(4);
|
||||||
PROVIDE ( end = . );
|
PROVIDE ( end = . );
|
||||||
|
|
|
@ -1,9 +1,8 @@
|
||||||
#!/bin/sh
|
#!/bin/sh
|
||||||
|
|
||||||
#production binary for bootloader
|
#production binary for bootloader
|
||||||
#dfu-util -a 0 --dfuse-address 0x08010000 -D /tmp/ArduCopter.build/f4light_Revolution.bin
|
dfu-util -a 0 --dfuse-address 0x08010000:leave -D ../../../../../ArduCopter/f4light_Airbot.bin
|
||||||
|
|
||||||
# bare metal binary
|
# bare metal binary
|
||||||
#dfu-util -a 0 --dfuse-address 0x08000000:unprotect:force -D ../../../../../ArduCopter/f4light_Airbot.bin
|
#dfu-util -a 0 --dfuse-address 0x08000000:unprotect:force -D ../../../../../ArduCopter/f4light_Airbot.bin
|
||||||
dfu-util -a 0 --dfuse-address 0x08000000:unprotect:force -D ../../../../../ArduCopter/f4light_Airbot.bin
|
|
||||||
|
|
||||||
|
|
|
@ -4,6 +4,9 @@
|
||||||
#/usr/local/stlink/st-flash --reset write /tmp/ArduCopter.build/f4light_Revolution.bin 0x08010000
|
#/usr/local/stlink/st-flash --reset write /tmp/ArduCopter.build/f4light_Revolution.bin 0x08010000
|
||||||
|
|
||||||
#bare metal binary
|
#bare metal binary
|
||||||
/usr/local/stlink/st-flash --reset write ../../../../../ArduCopter/f4light_Airbot.bin 0x08000000 && /usr/local/stlink/st-util -m
|
/usr/local/stlink/st-flash --reset read eeprom.bin 0x08004000 0xc000 && \
|
||||||
|
/usr/local/stlink/st-flash --reset write ../../../../../ArduCopter/f4light_Airbot_bl.bin 0x08000000 && \
|
||||||
|
/usr/local/stlink/st-flash --reset write eeprom.bin 0x08004000 && \
|
||||||
|
/usr/local/stlink/st-util -m
|
||||||
|
|
||||||
|
|
||||||
|
|
|
@ -4,6 +4,9 @@
|
||||||
#/usr/local/stlink/st-flash --reset write /tmp/ArduCopter.build/f4light_Revolution.bin 0x08010000
|
#/usr/local/stlink/st-flash --reset write /tmp/ArduCopter.build/f4light_Revolution.bin 0x08010000
|
||||||
|
|
||||||
#bare metal binary
|
#bare metal binary
|
||||||
/usr/local/stlink/st-flash --reset write ../../../../../ArduPlane/f4light_Airbot.bin 0x08000000 && /usr/local/stlink/st-util -m
|
/usr/local/stlink/st-flash --reset read eeprom.bin 0x08004000 0xc000 && \
|
||||||
|
/usr/local/stlink/st-flash --reset write ../../../../../ArduPlane/f4light_Airbot_bl.bin 0x08000000 && \
|
||||||
|
/usr/local/stlink/st-flash --reset write eeprom.bin 0x08004000 && \
|
||||||
|
/usr/local/stlink/st-util -m
|
||||||
|
|
||||||
|
|
||||||
|
|
|
@ -6,6 +6,10 @@
|
||||||
FLASH_SIZE := 1048576
|
FLASH_SIZE := 1048576
|
||||||
SRAM_SIZE := 131072
|
SRAM_SIZE := 131072
|
||||||
|
|
||||||
|
BOARD_TYPE := 70
|
||||||
|
BOARD_REV := 0
|
||||||
|
BOOTLOADER := revo405_bl
|
||||||
|
|
||||||
# Memory target-specific configuration values
|
# Memory target-specific configuration values
|
||||||
|
|
||||||
ifeq ($(MEMORY_TARGET), ram)
|
ifeq ($(MEMORY_TARGET), ram)
|
||||||
|
|
|
@ -128,7 +128,7 @@ SECTIONS
|
||||||
|
|
||||||
/* Uninitialized data section */
|
/* Uninitialized data section */
|
||||||
. = ALIGN(4);
|
. = ALIGN(4);
|
||||||
.bss :
|
.bss (NOLOAD):
|
||||||
{
|
{
|
||||||
/* This is used by the startup in order to initialize the .bss secion */
|
/* This is used by the startup in order to initialize the .bss secion */
|
||||||
_sbss = .; /* define a global symbol at bss start */
|
_sbss = .; /* define a global symbol at bss start */
|
||||||
|
@ -143,7 +143,7 @@ SECTIONS
|
||||||
} >RAM
|
} >RAM
|
||||||
|
|
||||||
/* User_heap_stack section, used to check that there is enough RAM left */
|
/* User_heap_stack section, used to check that there is enough RAM left */
|
||||||
._user_heap_stack :
|
._user_heap_stack (NOLOAD):
|
||||||
{
|
{
|
||||||
. = ALIGN(4);
|
. = ALIGN(4);
|
||||||
PROVIDE ( end = . );
|
PROVIDE ( end = . );
|
||||||
|
@ -163,7 +163,7 @@ SECTIONS
|
||||||
*(.mb1rodata*)
|
*(.mb1rodata*)
|
||||||
} >MEMORY_B1
|
} >MEMORY_B1
|
||||||
|
|
||||||
.ccm : {
|
.ccm (NOLOAD): {
|
||||||
. = ALIGN(4);
|
. = ALIGN(4);
|
||||||
_sccm = .;
|
_sccm = .;
|
||||||
*(.ccm)
|
*(.ccm)
|
||||||
|
|
|
@ -1,170 +0,0 @@
|
||||||
/*
|
|
||||||
*****************************************************************************
|
|
||||||
**
|
|
||||||
** File : stm32_flash.ld
|
|
||||||
**
|
|
||||||
** Abstract : Linker script for STM32F407VG Device with
|
|
||||||
** 1024KByte FLASH, 128KByte RAM
|
|
||||||
**
|
|
||||||
** Set heap size, stack size and stack location according
|
|
||||||
** to application requirements.
|
|
||||||
**
|
|
||||||
** Set memory bank area and size if external memory is used.
|
|
||||||
**
|
|
||||||
** Target : STMicroelectronics STM32
|
|
||||||
**
|
|
||||||
** Environment : Atollic TrueSTUDIO(R)
|
|
||||||
**
|
|
||||||
** Distribution: The file is distributed “as is,” without any warranty
|
|
||||||
** of any kind.
|
|
||||||
**
|
|
||||||
** (c)Copyright Atollic AB.
|
|
||||||
** You may use this file as-is or modify it according to the needs of your
|
|
||||||
** project. Distribution of this file (unmodified or modified) is not
|
|
||||||
** permitted. Atollic AB permit registered Atollic TrueSTUDIO(R) users the
|
|
||||||
** rights to distribute the assembled, compiled & linked contents of this
|
|
||||||
** file as part of an application binary file, provided that it is built
|
|
||||||
** using the Atollic TrueSTUDIO(R) toolchain.
|
|
||||||
**
|
|
||||||
*****************************************************************************
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Entry Point */
|
|
||||||
ENTRY(Reset_Handler)
|
|
||||||
|
|
||||||
/* Highest address of the user mode stack */
|
|
||||||
_estack = 0x20020000; /* end of 128K RAM */
|
|
||||||
|
|
||||||
/* Generate a link error if heap and stack don't fit into RAM */
|
|
||||||
_Min_Heap_Size = 0; /* required amount of heap */
|
|
||||||
_Min_Stack_Size = 0x800; /* required amount of stack */
|
|
||||||
|
|
||||||
/* Specify the memory areas */
|
|
||||||
MEMORY
|
|
||||||
{
|
|
||||||
FLASH (rx) : ORIGIN = 0x08020000, LENGTH = 896K
|
|
||||||
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K
|
|
||||||
MEMORY_B1 (rx) : ORIGIN = 0x60000000, LENGTH = 0K
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Define output sections */
|
|
||||||
SECTIONS
|
|
||||||
{
|
|
||||||
/* The startup code goes first into FLASH */
|
|
||||||
.isr_vector :
|
|
||||||
{
|
|
||||||
. = ALIGN(4);
|
|
||||||
KEEP(*(.isr_vector)) /* Startup code */
|
|
||||||
. = ALIGN(4);
|
|
||||||
} >FLASH
|
|
||||||
|
|
||||||
/* The program code and other data goes into FLASH */
|
|
||||||
.text :
|
|
||||||
{
|
|
||||||
. = ALIGN(4);
|
|
||||||
*(.text) /* .text sections (code) */
|
|
||||||
*(.text*) /* .text* sections (code) */
|
|
||||||
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
|
||||||
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
|
||||||
*(.glue_7) /* glue arm to thumb code */
|
|
||||||
*(.glue_7t) /* glue thumb to arm code */
|
|
||||||
*(.eh_frame)
|
|
||||||
|
|
||||||
KEEP (*(.init))
|
|
||||||
KEEP (*(.fini))
|
|
||||||
|
|
||||||
. = ALIGN(4);
|
|
||||||
_etext = .; /* define a global symbols at end of code */
|
|
||||||
} >FLASH
|
|
||||||
|
|
||||||
|
|
||||||
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
|
|
||||||
.ARM : {
|
|
||||||
__exidx_start = .;
|
|
||||||
*(.ARM.exidx*)
|
|
||||||
__exidx_end = .;
|
|
||||||
} >FLASH
|
|
||||||
|
|
||||||
.preinit_array :
|
|
||||||
{
|
|
||||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
|
||||||
KEEP (*(.preinit_array*))
|
|
||||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
|
||||||
} >FLASH
|
|
||||||
.init_array :
|
|
||||||
{
|
|
||||||
PROVIDE_HIDDEN (__init_array_start = .);
|
|
||||||
KEEP (*(SORT(.init_array.*)))
|
|
||||||
KEEP (*(.init_array*))
|
|
||||||
PROVIDE_HIDDEN (__init_array_end = .);
|
|
||||||
} >FLASH
|
|
||||||
.fini_array :
|
|
||||||
{
|
|
||||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
|
||||||
KEEP (*(.fini_array*))
|
|
||||||
KEEP (*(SORT(.fini_array.*)))
|
|
||||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
|
||||||
} >FLASH
|
|
||||||
|
|
||||||
/* used by the startup to initialize data */
|
|
||||||
_sidata = .;
|
|
||||||
|
|
||||||
/* Initialized data sections goes into RAM, load LMA copy after code */
|
|
||||||
.data :
|
|
||||||
{
|
|
||||||
. = ALIGN(4);
|
|
||||||
_sdata = .; /* create a global symbol at data start */
|
|
||||||
*(.data) /* .data sections */
|
|
||||||
*(.data*) /* .data* sections */
|
|
||||||
|
|
||||||
. = ALIGN(4);
|
|
||||||
_edata = .; /* define a global symbol at data end */
|
|
||||||
} >RAM AT> FLASH
|
|
||||||
|
|
||||||
/* Uninitialized data section */
|
|
||||||
. = ALIGN(4);
|
|
||||||
.bss :
|
|
||||||
{
|
|
||||||
/* This is used by the startup in order to initialize the .bss secion */
|
|
||||||
_sbss = .; /* define a global symbol at bss start */
|
|
||||||
__bss_start__ = _sbss;
|
|
||||||
*(.bss)
|
|
||||||
*(.bss*)
|
|
||||||
*(COMMON)
|
|
||||||
|
|
||||||
. = ALIGN(4);
|
|
||||||
_ebss = .; /* define a global symbol at bss end */
|
|
||||||
__bss_end__ = _ebss;
|
|
||||||
} >RAM
|
|
||||||
|
|
||||||
/* User_heap_stack section, used to check that there is enough RAM left */
|
|
||||||
._user_heap_stack :
|
|
||||||
{
|
|
||||||
. = ALIGN(4);
|
|
||||||
PROVIDE ( end = . );
|
|
||||||
PROVIDE ( _end = . );
|
|
||||||
. = . + _Min_Heap_Size;
|
|
||||||
. = . + _Min_Stack_Size;
|
|
||||||
. = ALIGN(4);
|
|
||||||
} >RAM
|
|
||||||
|
|
||||||
/* MEMORY_bank1 section, code must be located here explicitly */
|
|
||||||
/* Example: extern int foo(void) __attribute__ ((section (".mb1text"))); */
|
|
||||||
.memory_b1_text :
|
|
||||||
{
|
|
||||||
*(.mb1text) /* .mb1text sections (code) */
|
|
||||||
*(.mb1text*) /* .mb1text* sections (code) */
|
|
||||||
*(.mb1rodata) /* read-only data (constants) */
|
|
||||||
*(.mb1rodata*)
|
|
||||||
} >MEMORY_B1
|
|
||||||
|
|
||||||
/* Remove information from the standard libraries */
|
|
||||||
/DISCARD/ :
|
|
||||||
{
|
|
||||||
libc.a ( * )
|
|
||||||
libm.a ( * )
|
|
||||||
libgcc.a ( * )
|
|
||||||
}
|
|
||||||
|
|
||||||
.ARM.attributes 0 : { *(.ARM.attributes) }
|
|
||||||
}
|
|
|
@ -1 +1 @@
|
||||||
flash_8000000.ld
|
flash-10000.ld
|
|
@ -1,12 +1,11 @@
|
||||||
#!/bin/sh
|
#!/bin/sh
|
||||||
|
|
||||||
#production binary for bootloader
|
#production binary for bootloader
|
||||||
#dfu-util -a 0 --dfuse-address 0x08010000 -D /tmp/ArduCopter.build/f4light_AirbotV2.bin
|
dfu-util -a 0 --dfuse-address 0x08010000:unprotect:force -D ../../../../../ArduCopter/f4light_AirbotV2.bin -R
|
||||||
|
|
||||||
# bare metal binary
|
# bare metal binary
|
||||||
|
|
||||||
#dfu-util -a 0 --dfuse-address 0x08000000:unprotect:force -D /tmp/ArduCopter.build/f4light_Revolution.bin
|
#dfu-util -a 0 --dfuse-address 0x08000000:unprotect:force -D /tmp/ArduCopter.build/f4light_Revolution.bin
|
||||||
#dfu-util -a 0 --dfuse-address 0x08000000:leave -D ../../../../../ArduCopter/f4light_Revolution.bin -R
|
#dfu-util -a 0 --dfuse-address 0x08000000:leave -D ../../../../../ArduCopter/f4light_Revolution.bin -R
|
||||||
|
|
||||||
dfu-util -a 0 --dfuse-address 0x08000000:unprotect:force -D ../../../../../ArduCopter/f4light_AirbotV2.bin -R
|
|
||||||
|
|
||||||
|
|
|
@ -4,6 +4,8 @@
|
||||||
#/usr/local/stlink/st-flash --reset write /tmp/ArduCopter.build/f4light_Revolution.bin 0x08010000
|
#/usr/local/stlink/st-flash --reset write /tmp/ArduCopter.build/f4light_Revolution.bin 0x08010000
|
||||||
|
|
||||||
#bare metal binary
|
#bare metal binary
|
||||||
/usr/local/stlink/st-flash --reset write ../../../../../ArduCopter/f4light_AirbotV2.bin 0x08000000 && /usr/local/stlink/st-util -m
|
|
||||||
|
|
||||||
|
|
||||||
|
/usr/local/stlink/st-flash --reset read eeprom.bin 0x08004000 0xc000 && \
|
||||||
|
/usr/local/stlink/st-flash --reset write ../../../../../ArduCopter/f4light_AirbotV2_bl.bin 0x08000000 && \
|
||||||
|
/usr/local/stlink/st-flash --reset write eeprom.bin 0x08004000 && \
|
||||||
|
/usr/local/stlink/st-util -m
|
||||||
|
|
|
@ -4,6 +4,8 @@
|
||||||
#/usr/local/stlink/st-flash --reset write /tmp/ArduCopter.build/f4light_Revolution.bin 0x08010000
|
#/usr/local/stlink/st-flash --reset write /tmp/ArduCopter.build/f4light_Revolution.bin 0x08010000
|
||||||
|
|
||||||
#bare metal binary
|
#bare metal binary
|
||||||
/usr/local/stlink/st-flash --reset write ../../../../../ArduPlane/f4light_AirbotV2.bin 0x08000000 && /usr/local/stlink/st-util -m
|
|
||||||
|
|
||||||
|
|
||||||
|
/usr/local/stlink/st-flash --reset read eeprom.bin 0x08004000 0xc000 && \
|
||||||
|
/usr/local/stlink/st-flash --reset write ../../../../../ArduPlane/f4light_AirbotV2_bl.bin 0x08000000 && \
|
||||||
|
/usr/local/stlink/st-flash --reset write eeprom.bin 0x08004000 && \
|
||||||
|
/usr/local/stlink/st-util -m
|
|
@ -6,6 +6,10 @@
|
||||||
FLASH_SIZE := 1048576
|
FLASH_SIZE := 1048576
|
||||||
SRAM_SIZE := 131072
|
SRAM_SIZE := 131072
|
||||||
|
|
||||||
|
BOARD_TYPE := 70
|
||||||
|
BOARD_REV := 1
|
||||||
|
BOOTLOADER := revo405_bl
|
||||||
|
|
||||||
# Memory target-specific configuration values
|
# Memory target-specific configuration values
|
||||||
|
|
||||||
ifeq ($(MEMORY_TARGET), ram)
|
ifeq ($(MEMORY_TARGET), ram)
|
||||||
|
|
|
@ -128,7 +128,7 @@ SECTIONS
|
||||||
|
|
||||||
/* Uninitialized data section */
|
/* Uninitialized data section */
|
||||||
. = ALIGN(4);
|
. = ALIGN(4);
|
||||||
.bss :
|
.bss (NOLOAD):
|
||||||
{
|
{
|
||||||
/* This is used by the startup in order to initialize the .bss secion */
|
/* This is used by the startup in order to initialize the .bss secion */
|
||||||
_sbss = .; /* define a global symbol at bss start */
|
_sbss = .; /* define a global symbol at bss start */
|
||||||
|
@ -143,7 +143,7 @@ SECTIONS
|
||||||
} >RAM
|
} >RAM
|
||||||
|
|
||||||
/* User_heap_stack section, used to check that there is enough RAM left */
|
/* User_heap_stack section, used to check that there is enough RAM left */
|
||||||
._user_heap_stack :
|
._user_heap_stack (NOLOAD):
|
||||||
{
|
{
|
||||||
. = ALIGN(4);
|
. = ALIGN(4);
|
||||||
PROVIDE ( end = . );
|
PROVIDE ( end = . );
|
||||||
|
@ -163,7 +163,7 @@ SECTIONS
|
||||||
*(.mb1rodata*)
|
*(.mb1rodata*)
|
||||||
} >MEMORY_B1
|
} >MEMORY_B1
|
||||||
|
|
||||||
.ccm : {
|
.ccm (NOLOAD): {
|
||||||
. = ALIGN(4);
|
. = ALIGN(4);
|
||||||
_sccm = .;
|
_sccm = .;
|
||||||
*(.ccm)
|
*(.ccm)
|
||||||
|
|
|
@ -1,170 +0,0 @@
|
||||||
/*
|
|
||||||
*****************************************************************************
|
|
||||||
**
|
|
||||||
** File : stm32_flash.ld
|
|
||||||
**
|
|
||||||
** Abstract : Linker script for STM32F407VG Device with
|
|
||||||
** 1024KByte FLASH, 128KByte RAM
|
|
||||||
**
|
|
||||||
** Set heap size, stack size and stack location according
|
|
||||||
** to application requirements.
|
|
||||||
**
|
|
||||||
** Set memory bank area and size if external memory is used.
|
|
||||||
**
|
|
||||||
** Target : STMicroelectronics STM32
|
|
||||||
**
|
|
||||||
** Environment : Atollic TrueSTUDIO(R)
|
|
||||||
**
|
|
||||||
** Distribution: The file is distributed “as is,” without any warranty
|
|
||||||
** of any kind.
|
|
||||||
**
|
|
||||||
** (c)Copyright Atollic AB.
|
|
||||||
** You may use this file as-is or modify it according to the needs of your
|
|
||||||
** project. Distribution of this file (unmodified or modified) is not
|
|
||||||
** permitted. Atollic AB permit registered Atollic TrueSTUDIO(R) users the
|
|
||||||
** rights to distribute the assembled, compiled & linked contents of this
|
|
||||||
** file as part of an application binary file, provided that it is built
|
|
||||||
** using the Atollic TrueSTUDIO(R) toolchain.
|
|
||||||
**
|
|
||||||
*****************************************************************************
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Entry Point */
|
|
||||||
ENTRY(Reset_Handler)
|
|
||||||
|
|
||||||
/* Highest address of the user mode stack */
|
|
||||||
_estack = 0x10010000; /* end of 64k CCM */
|
|
||||||
|
|
||||||
/* Generate a link error if heap and stack don't fit into RAM */
|
|
||||||
_Min_Heap_Size = 0; /* required amount of heap */
|
|
||||||
_Min_Stack_Size = 0x800; /* required amount of stack */
|
|
||||||
|
|
||||||
/* Specify the memory areas */
|
|
||||||
MEMORY
|
|
||||||
{
|
|
||||||
FLASH (rx) : ORIGIN = 0x08020000, LENGTH = 896K
|
|
||||||
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K
|
|
||||||
MEMORY_B1 (rx) : ORIGIN = 0x60000000, LENGTH = 0K
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Define output sections */
|
|
||||||
SECTIONS
|
|
||||||
{
|
|
||||||
/* The startup code goes first into FLASH */
|
|
||||||
.isr_vector :
|
|
||||||
{
|
|
||||||
. = ALIGN(4);
|
|
||||||
KEEP(*(.isr_vector)) /* Startup code */
|
|
||||||
. = ALIGN(4);
|
|
||||||
} >FLASH
|
|
||||||
|
|
||||||
/* The program code and other data goes into FLASH */
|
|
||||||
.text :
|
|
||||||
{
|
|
||||||
. = ALIGN(4);
|
|
||||||
*(.text) /* .text sections (code) */
|
|
||||||
*(.text*) /* .text* sections (code) */
|
|
||||||
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
|
||||||
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
|
||||||
*(.glue_7) /* glue arm to thumb code */
|
|
||||||
*(.glue_7t) /* glue thumb to arm code */
|
|
||||||
*(.eh_frame)
|
|
||||||
|
|
||||||
KEEP (*(.init))
|
|
||||||
KEEP (*(.fini))
|
|
||||||
|
|
||||||
. = ALIGN(4);
|
|
||||||
_etext = .; /* define a global symbols at end of code */
|
|
||||||
} >FLASH
|
|
||||||
|
|
||||||
|
|
||||||
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
|
|
||||||
.ARM : {
|
|
||||||
__exidx_start = .;
|
|
||||||
*(.ARM.exidx*)
|
|
||||||
__exidx_end = .;
|
|
||||||
} >FLASH
|
|
||||||
|
|
||||||
.preinit_array :
|
|
||||||
{
|
|
||||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
|
||||||
KEEP (*(.preinit_array*))
|
|
||||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
|
||||||
} >FLASH
|
|
||||||
.init_array :
|
|
||||||
{
|
|
||||||
PROVIDE_HIDDEN (__init_array_start = .);
|
|
||||||
KEEP (*(SORT(.init_array.*)))
|
|
||||||
KEEP (*(.init_array*))
|
|
||||||
PROVIDE_HIDDEN (__init_array_end = .);
|
|
||||||
} >FLASH
|
|
||||||
.fini_array :
|
|
||||||
{
|
|
||||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
|
||||||
KEEP (*(.fini_array*))
|
|
||||||
KEEP (*(SORT(.fini_array.*)))
|
|
||||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
|
||||||
} >FLASH
|
|
||||||
|
|
||||||
/* used by the startup to initialize data */
|
|
||||||
_sidata = .;
|
|
||||||
|
|
||||||
/* Initialized data sections goes into RAM, load LMA copy after code */
|
|
||||||
.data :
|
|
||||||
{
|
|
||||||
. = ALIGN(4);
|
|
||||||
_sdata = .; /* create a global symbol at data start */
|
|
||||||
*(.data) /* .data sections */
|
|
||||||
*(.data*) /* .data* sections */
|
|
||||||
|
|
||||||
. = ALIGN(4);
|
|
||||||
_edata = .; /* define a global symbol at data end */
|
|
||||||
} >RAM AT> FLASH
|
|
||||||
|
|
||||||
/* Uninitialized data section */
|
|
||||||
. = ALIGN(4);
|
|
||||||
.bss :
|
|
||||||
{
|
|
||||||
/* This is used by the startup in order to initialize the .bss secion */
|
|
||||||
_sbss = .; /* define a global symbol at bss start */
|
|
||||||
__bss_start__ = _sbss;
|
|
||||||
*(.bss)
|
|
||||||
*(.bss*)
|
|
||||||
*(COMMON)
|
|
||||||
|
|
||||||
. = ALIGN(4);
|
|
||||||
_ebss = .; /* define a global symbol at bss end */
|
|
||||||
__bss_end__ = _ebss;
|
|
||||||
} >RAM
|
|
||||||
|
|
||||||
/* User_heap_stack section, used to check that there is enough RAM left */
|
|
||||||
._user_heap_stack :
|
|
||||||
{
|
|
||||||
. = ALIGN(4);
|
|
||||||
PROVIDE ( end = . );
|
|
||||||
PROVIDE ( _end = . );
|
|
||||||
. = . + _Min_Heap_Size;
|
|
||||||
. = . + _Min_Stack_Size;
|
|
||||||
. = ALIGN(4);
|
|
||||||
} >RAM
|
|
||||||
|
|
||||||
/* MEMORY_bank1 section, code must be located here explicitly */
|
|
||||||
/* Example: extern int foo(void) __attribute__ ((section (".mb1text"))); */
|
|
||||||
.memory_b1_text :
|
|
||||||
{
|
|
||||||
*(.mb1text) /* .mb1text sections (code) */
|
|
||||||
*(.mb1text*) /* .mb1text* sections (code) */
|
|
||||||
*(.mb1rodata) /* read-only data (constants) */
|
|
||||||
*(.mb1rodata*)
|
|
||||||
} >MEMORY_B1
|
|
||||||
|
|
||||||
/* Remove information from the standard libraries */
|
|
||||||
/DISCARD/ :
|
|
||||||
{
|
|
||||||
libc.a ( * )
|
|
||||||
libm.a ( * )
|
|
||||||
libgcc.a ( * )
|
|
||||||
}
|
|
||||||
|
|
||||||
.ARM.attributes 0 : { *(.ARM.attributes) }
|
|
||||||
}
|
|
|
@ -1 +1 @@
|
||||||
flash_8000000.ld
|
flash-10000.ld
|
|
@ -6,6 +6,10 @@
|
||||||
FLASH_SIZE := 1048576
|
FLASH_SIZE := 1048576
|
||||||
SRAM_SIZE := 131072
|
SRAM_SIZE := 131072
|
||||||
|
|
||||||
|
BOARD_TYPE := 70
|
||||||
|
BOARD_REV := 2
|
||||||
|
BOOTLOADER := revo405_bl
|
||||||
|
|
||||||
# Memory target-specific configuration values
|
# Memory target-specific configuration values
|
||||||
|
|
||||||
ifeq ($(MEMORY_TARGET), ram)
|
ifeq ($(MEMORY_TARGET), ram)
|
||||||
|
|
|
@ -128,7 +128,7 @@ SECTIONS
|
||||||
|
|
||||||
/* Uninitialized data section */
|
/* Uninitialized data section */
|
||||||
. = ALIGN(4);
|
. = ALIGN(4);
|
||||||
.bss :
|
.bss (NOLOAD):
|
||||||
{
|
{
|
||||||
/* This is used by the startup in order to initialize the .bss secion */
|
/* This is used by the startup in order to initialize the .bss secion */
|
||||||
_sbss = .; /* define a global symbol at bss start */
|
_sbss = .; /* define a global symbol at bss start */
|
||||||
|
@ -143,7 +143,7 @@ SECTIONS
|
||||||
} >RAM
|
} >RAM
|
||||||
|
|
||||||
/* User_heap_stack section, used to check that there is enough RAM left */
|
/* User_heap_stack section, used to check that there is enough RAM left */
|
||||||
._user_heap_stack :
|
._user_heap_stack (NOLOAD):
|
||||||
{
|
{
|
||||||
. = ALIGN(4);
|
. = ALIGN(4);
|
||||||
PROVIDE ( end = . );
|
PROVIDE ( end = . );
|
||||||
|
@ -163,7 +163,7 @@ SECTIONS
|
||||||
*(.mb1rodata*)
|
*(.mb1rodata*)
|
||||||
} >MEMORY_B1
|
} >MEMORY_B1
|
||||||
|
|
||||||
.ccm : {
|
.ccm (NOLOAD): {
|
||||||
. = ALIGN(4);
|
. = ALIGN(4);
|
||||||
_sccm = .;
|
_sccm = .;
|
||||||
*(.ccm)
|
*(.ccm)
|
||||||
|
|
|
@ -1,170 +0,0 @@
|
||||||
/*
|
|
||||||
*****************************************************************************
|
|
||||||
**
|
|
||||||
** File : stm32_flash.ld
|
|
||||||
**
|
|
||||||
** Abstract : Linker script for STM32F407VG Device with
|
|
||||||
** 1024KByte FLASH, 128KByte RAM
|
|
||||||
**
|
|
||||||
** Set heap size, stack size and stack location according
|
|
||||||
** to application requirements.
|
|
||||||
**
|
|
||||||
** Set memory bank area and size if external memory is used.
|
|
||||||
**
|
|
||||||
** Target : STMicroelectronics STM32
|
|
||||||
**
|
|
||||||
** Environment : Atollic TrueSTUDIO(R)
|
|
||||||
**
|
|
||||||
** Distribution: The file is distributed “as is,” without any warranty
|
|
||||||
** of any kind.
|
|
||||||
**
|
|
||||||
** (c)Copyright Atollic AB.
|
|
||||||
** You may use this file as-is or modify it according to the needs of your
|
|
||||||
** project. Distribution of this file (unmodified or modified) is not
|
|
||||||
** permitted. Atollic AB permit registered Atollic TrueSTUDIO(R) users the
|
|
||||||
** rights to distribute the assembled, compiled & linked contents of this
|
|
||||||
** file as part of an application binary file, provided that it is built
|
|
||||||
** using the Atollic TrueSTUDIO(R) toolchain.
|
|
||||||
**
|
|
||||||
*****************************************************************************
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Entry Point */
|
|
||||||
ENTRY(Reset_Handler)
|
|
||||||
|
|
||||||
/* Highest address of the user mode stack */
|
|
||||||
_estack = 0x10010000; /* end of 64k CCM */
|
|
||||||
|
|
||||||
/* Generate a link error if heap and stack don't fit into RAM */
|
|
||||||
_Min_Heap_Size = 0; /* required amount of heap */
|
|
||||||
_Min_Stack_Size = 0x800; /* required amount of stack */
|
|
||||||
|
|
||||||
/* Specify the memory areas */
|
|
||||||
MEMORY
|
|
||||||
{
|
|
||||||
FLASH (rx) : ORIGIN = 0x08020000, LENGTH = 896K
|
|
||||||
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K
|
|
||||||
MEMORY_B1 (rx) : ORIGIN = 0x60000000, LENGTH = 0K
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Define output sections */
|
|
||||||
SECTIONS
|
|
||||||
{
|
|
||||||
/* The startup code goes first into FLASH */
|
|
||||||
.isr_vector :
|
|
||||||
{
|
|
||||||
. = ALIGN(4);
|
|
||||||
KEEP(*(.isr_vector)) /* Startup code */
|
|
||||||
. = ALIGN(4);
|
|
||||||
} >FLASH
|
|
||||||
|
|
||||||
/* The program code and other data goes into FLASH */
|
|
||||||
.text :
|
|
||||||
{
|
|
||||||
. = ALIGN(4);
|
|
||||||
*(.text) /* .text sections (code) */
|
|
||||||
*(.text*) /* .text* sections (code) */
|
|
||||||
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
|
||||||
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
|
||||||
*(.glue_7) /* glue arm to thumb code */
|
|
||||||
*(.glue_7t) /* glue thumb to arm code */
|
|
||||||
*(.eh_frame)
|
|
||||||
|
|
||||||
KEEP (*(.init))
|
|
||||||
KEEP (*(.fini))
|
|
||||||
|
|
||||||
. = ALIGN(4);
|
|
||||||
_etext = .; /* define a global symbols at end of code */
|
|
||||||
} >FLASH
|
|
||||||
|
|
||||||
|
|
||||||
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
|
|
||||||
.ARM : {
|
|
||||||
__exidx_start = .;
|
|
||||||
*(.ARM.exidx*)
|
|
||||||
__exidx_end = .;
|
|
||||||
} >FLASH
|
|
||||||
|
|
||||||
.preinit_array :
|
|
||||||
{
|
|
||||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
|
||||||
KEEP (*(.preinit_array*))
|
|
||||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
|
||||||
} >FLASH
|
|
||||||
.init_array :
|
|
||||||
{
|
|
||||||
PROVIDE_HIDDEN (__init_array_start = .);
|
|
||||||
KEEP (*(SORT(.init_array.*)))
|
|
||||||
KEEP (*(.init_array*))
|
|
||||||
PROVIDE_HIDDEN (__init_array_end = .);
|
|
||||||
} >FLASH
|
|
||||||
.fini_array :
|
|
||||||
{
|
|
||||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
|
||||||
KEEP (*(.fini_array*))
|
|
||||||
KEEP (*(SORT(.fini_array.*)))
|
|
||||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
|
||||||
} >FLASH
|
|
||||||
|
|
||||||
/* used by the startup to initialize data */
|
|
||||||
_sidata = .;
|
|
||||||
|
|
||||||
/* Initialized data sections goes into RAM, load LMA copy after code */
|
|
||||||
.data :
|
|
||||||
{
|
|
||||||
. = ALIGN(4);
|
|
||||||
_sdata = .; /* create a global symbol at data start */
|
|
||||||
*(.data) /* .data sections */
|
|
||||||
*(.data*) /* .data* sections */
|
|
||||||
|
|
||||||
. = ALIGN(4);
|
|
||||||
_edata = .; /* define a global symbol at data end */
|
|
||||||
} >RAM AT> FLASH
|
|
||||||
|
|
||||||
/* Uninitialized data section */
|
|
||||||
. = ALIGN(4);
|
|
||||||
.bss :
|
|
||||||
{
|
|
||||||
/* This is used by the startup in order to initialize the .bss secion */
|
|
||||||
_sbss = .; /* define a global symbol at bss start */
|
|
||||||
__bss_start__ = _sbss;
|
|
||||||
*(.bss)
|
|
||||||
*(.bss*)
|
|
||||||
*(COMMON)
|
|
||||||
|
|
||||||
. = ALIGN(4);
|
|
||||||
_ebss = .; /* define a global symbol at bss end */
|
|
||||||
__bss_end__ = _ebss;
|
|
||||||
} >RAM
|
|
||||||
|
|
||||||
/* User_heap_stack section, used to check that there is enough RAM left */
|
|
||||||
._user_heap_stack :
|
|
||||||
{
|
|
||||||
. = ALIGN(4);
|
|
||||||
PROVIDE ( end = . );
|
|
||||||
PROVIDE ( _end = . );
|
|
||||||
. = . + _Min_Heap_Size;
|
|
||||||
. = . + _Min_Stack_Size;
|
|
||||||
. = ALIGN(4);
|
|
||||||
} >RAM
|
|
||||||
|
|
||||||
/* MEMORY_bank1 section, code must be located here explicitly */
|
|
||||||
/* Example: extern int foo(void) __attribute__ ((section (".mb1text"))); */
|
|
||||||
.memory_b1_text :
|
|
||||||
{
|
|
||||||
*(.mb1text) /* .mb1text sections (code) */
|
|
||||||
*(.mb1text*) /* .mb1text* sections (code) */
|
|
||||||
*(.mb1rodata) /* read-only data (constants) */
|
|
||||||
*(.mb1rodata*)
|
|
||||||
} >MEMORY_B1
|
|
||||||
|
|
||||||
/* Remove information from the standard libraries */
|
|
||||||
/DISCARD/ :
|
|
||||||
{
|
|
||||||
libc.a ( * )
|
|
||||||
libm.a ( * )
|
|
||||||
libgcc.a ( * )
|
|
||||||
}
|
|
||||||
|
|
||||||
.ARM.attributes 0 : { *(.ARM.attributes) }
|
|
||||||
}
|
|
|
@ -1 +1 @@
|
||||||
flash_8000000.ld
|
flash-10000.ld
|
|
@ -6,6 +6,9 @@
|
||||||
FLASH_SIZE := 1048576
|
FLASH_SIZE := 1048576
|
||||||
SRAM_SIZE := 131072
|
SRAM_SIZE := 131072
|
||||||
|
|
||||||
|
BOARD_TYPE := 70
|
||||||
|
BOARD_REV := 3
|
||||||
|
BOOTLOADER := revo405_bl
|
||||||
# Memory target-specific configuration values
|
# Memory target-specific configuration values
|
||||||
|
|
||||||
ifeq ($(MEMORY_TARGET), ram)
|
ifeq ($(MEMORY_TARGET), ram)
|
||||||
|
|
|
@ -128,7 +128,7 @@ SECTIONS
|
||||||
|
|
||||||
/* Uninitialized data section */
|
/* Uninitialized data section */
|
||||||
. = ALIGN(4);
|
. = ALIGN(4);
|
||||||
.bss :
|
.bss (NOLOAD):
|
||||||
{
|
{
|
||||||
/* This is used by the startup in order to initialize the .bss secion */
|
/* This is used by the startup in order to initialize the .bss secion */
|
||||||
_sbss = .; /* define a global symbol at bss start */
|
_sbss = .; /* define a global symbol at bss start */
|
||||||
|
@ -143,7 +143,7 @@ SECTIONS
|
||||||
} >RAM
|
} >RAM
|
||||||
|
|
||||||
/* User_heap_stack section, used to check that there is enough RAM left */
|
/* User_heap_stack section, used to check that there is enough RAM left */
|
||||||
._user_heap_stack :
|
._user_heap_stack (NOLOAD):
|
||||||
{
|
{
|
||||||
. = ALIGN(4);
|
. = ALIGN(4);
|
||||||
PROVIDE ( end = . );
|
PROVIDE ( end = . );
|
||||||
|
@ -163,7 +163,7 @@ SECTIONS
|
||||||
*(.mb1rodata*)
|
*(.mb1rodata*)
|
||||||
} >MEMORY_B1
|
} >MEMORY_B1
|
||||||
|
|
||||||
.ccm : {
|
.ccm (NOLOAD): {
|
||||||
. = ALIGN(4);
|
. = ALIGN(4);
|
||||||
_sccm = .;
|
_sccm = .;
|
||||||
*(.ccm)
|
*(.ccm)
|
||||||
|
|
|
@ -1,170 +0,0 @@
|
||||||
/*
|
|
||||||
*****************************************************************************
|
|
||||||
**
|
|
||||||
** File : stm32_flash.ld
|
|
||||||
**
|
|
||||||
** Abstract : Linker script for STM32F407VG Device with
|
|
||||||
** 1024KByte FLASH, 128KByte RAM
|
|
||||||
**
|
|
||||||
** Set heap size, stack size and stack location according
|
|
||||||
** to application requirements.
|
|
||||||
**
|
|
||||||
** Set memory bank area and size if external memory is used.
|
|
||||||
**
|
|
||||||
** Target : STMicroelectronics STM32
|
|
||||||
**
|
|
||||||
** Environment : Atollic TrueSTUDIO(R)
|
|
||||||
**
|
|
||||||
** Distribution: The file is distributed “as is,” without any warranty
|
|
||||||
** of any kind.
|
|
||||||
**
|
|
||||||
** (c)Copyright Atollic AB.
|
|
||||||
** You may use this file as-is or modify it according to the needs of your
|
|
||||||
** project. Distribution of this file (unmodified or modified) is not
|
|
||||||
** permitted. Atollic AB permit registered Atollic TrueSTUDIO(R) users the
|
|
||||||
** rights to distribute the assembled, compiled & linked contents of this
|
|
||||||
** file as part of an application binary file, provided that it is built
|
|
||||||
** using the Atollic TrueSTUDIO(R) toolchain.
|
|
||||||
**
|
|
||||||
*****************************************************************************
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Entry Point */
|
|
||||||
ENTRY(Reset_Handler)
|
|
||||||
|
|
||||||
/* Highest address of the user mode stack */
|
|
||||||
_estack = 0x20020000; /* end of 128K RAM */
|
|
||||||
|
|
||||||
/* Generate a link error if heap and stack don't fit into RAM */
|
|
||||||
_Min_Heap_Size = 0; /* required amount of heap */
|
|
||||||
_Min_Stack_Size = 0x800; /* required amount of stack */
|
|
||||||
|
|
||||||
/* Specify the memory areas */
|
|
||||||
MEMORY
|
|
||||||
{
|
|
||||||
FLASH (rx) : ORIGIN = 0x08020000, LENGTH = 896K
|
|
||||||
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K
|
|
||||||
MEMORY_B1 (rx) : ORIGIN = 0x60000000, LENGTH = 0K
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Define output sections */
|
|
||||||
SECTIONS
|
|
||||||
{
|
|
||||||
/* The startup code goes first into FLASH */
|
|
||||||
.isr_vector :
|
|
||||||
{
|
|
||||||
. = ALIGN(4);
|
|
||||||
KEEP(*(.isr_vector)) /* Startup code */
|
|
||||||
. = ALIGN(4);
|
|
||||||
} >FLASH
|
|
||||||
|
|
||||||
/* The program code and other data goes into FLASH */
|
|
||||||
.text :
|
|
||||||
{
|
|
||||||
. = ALIGN(4);
|
|
||||||
*(.text) /* .text sections (code) */
|
|
||||||
*(.text*) /* .text* sections (code) */
|
|
||||||
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
|
||||||
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
|
||||||
*(.glue_7) /* glue arm to thumb code */
|
|
||||||
*(.glue_7t) /* glue thumb to arm code */
|
|
||||||
*(.eh_frame)
|
|
||||||
|
|
||||||
KEEP (*(.init))
|
|
||||||
KEEP (*(.fini))
|
|
||||||
|
|
||||||
. = ALIGN(4);
|
|
||||||
_etext = .; /* define a global symbols at end of code */
|
|
||||||
} >FLASH
|
|
||||||
|
|
||||||
|
|
||||||
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
|
|
||||||
.ARM : {
|
|
||||||
__exidx_start = .;
|
|
||||||
*(.ARM.exidx*)
|
|
||||||
__exidx_end = .;
|
|
||||||
} >FLASH
|
|
||||||
|
|
||||||
.preinit_array :
|
|
||||||
{
|
|
||||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
|
||||||
KEEP (*(.preinit_array*))
|
|
||||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
|
||||||
} >FLASH
|
|
||||||
.init_array :
|
|
||||||
{
|
|
||||||
PROVIDE_HIDDEN (__init_array_start = .);
|
|
||||||
KEEP (*(SORT(.init_array.*)))
|
|
||||||
KEEP (*(.init_array*))
|
|
||||||
PROVIDE_HIDDEN (__init_array_end = .);
|
|
||||||
} >FLASH
|
|
||||||
.fini_array :
|
|
||||||
{
|
|
||||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
|
||||||
KEEP (*(.fini_array*))
|
|
||||||
KEEP (*(SORT(.fini_array.*)))
|
|
||||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
|
||||||
} >FLASH
|
|
||||||
|
|
||||||
/* used by the startup to initialize data */
|
|
||||||
_sidata = .;
|
|
||||||
|
|
||||||
/* Initialized data sections goes into RAM, load LMA copy after code */
|
|
||||||
.data :
|
|
||||||
{
|
|
||||||
. = ALIGN(4);
|
|
||||||
_sdata = .; /* create a global symbol at data start */
|
|
||||||
*(.data) /* .data sections */
|
|
||||||
*(.data*) /* .data* sections */
|
|
||||||
|
|
||||||
. = ALIGN(4);
|
|
||||||
_edata = .; /* define a global symbol at data end */
|
|
||||||
} >RAM AT> FLASH
|
|
||||||
|
|
||||||
/* Uninitialized data section */
|
|
||||||
. = ALIGN(4);
|
|
||||||
.bss :
|
|
||||||
{
|
|
||||||
/* This is used by the startup in order to initialize the .bss secion */
|
|
||||||
_sbss = .; /* define a global symbol at bss start */
|
|
||||||
__bss_start__ = _sbss;
|
|
||||||
*(.bss)
|
|
||||||
*(.bss*)
|
|
||||||
*(COMMON)
|
|
||||||
|
|
||||||
. = ALIGN(4);
|
|
||||||
_ebss = .; /* define a global symbol at bss end */
|
|
||||||
__bss_end__ = _ebss;
|
|
||||||
} >RAM
|
|
||||||
|
|
||||||
/* User_heap_stack section, used to check that there is enough RAM left */
|
|
||||||
._user_heap_stack :
|
|
||||||
{
|
|
||||||
. = ALIGN(4);
|
|
||||||
PROVIDE ( end = . );
|
|
||||||
PROVIDE ( _end = . );
|
|
||||||
. = . + _Min_Heap_Size;
|
|
||||||
. = . + _Min_Stack_Size;
|
|
||||||
. = ALIGN(4);
|
|
||||||
} >RAM
|
|
||||||
|
|
||||||
/* MEMORY_bank1 section, code must be located here explicitly */
|
|
||||||
/* Example: extern int foo(void) __attribute__ ((section (".mb1text"))); */
|
|
||||||
.memory_b1_text :
|
|
||||||
{
|
|
||||||
*(.mb1text) /* .mb1text sections (code) */
|
|
||||||
*(.mb1text*) /* .mb1text* sections (code) */
|
|
||||||
*(.mb1rodata) /* read-only data (constants) */
|
|
||||||
*(.mb1rodata*)
|
|
||||||
} >MEMORY_B1
|
|
||||||
|
|
||||||
/* Remove information from the standard libraries */
|
|
||||||
/DISCARD/ :
|
|
||||||
{
|
|
||||||
libc.a ( * )
|
|
||||||
libm.a ( * )
|
|
||||||
libgcc.a ( * )
|
|
||||||
}
|
|
||||||
|
|
||||||
.ARM.attributes 0 : { *(.ARM.attributes) }
|
|
||||||
}
|
|
|
@ -1 +1 @@
|
||||||
flash_8000000.ld
|
flash-10000.ld
|
|
@ -136,7 +136,7 @@ SECTIONS
|
||||||
|
|
||||||
/* Uninitialized data section */
|
/* Uninitialized data section */
|
||||||
. = ALIGN(4);
|
. = ALIGN(4);
|
||||||
.bss :
|
.bss (NOLOAD):
|
||||||
{
|
{
|
||||||
/* This is used by the startup in order to initialize the .bss secion */
|
/* This is used by the startup in order to initialize the .bss secion */
|
||||||
_sbss = .; /* define a global symbol at bss start */
|
_sbss = .; /* define a global symbol at bss start */
|
||||||
|
@ -151,7 +151,7 @@ SECTIONS
|
||||||
} >RAM
|
} >RAM
|
||||||
|
|
||||||
/* User_heap_stack section, used to check that there is enough RAM left */
|
/* User_heap_stack section, used to check that there is enough RAM left */
|
||||||
._user_heap_stack :
|
._user_heap_stack (NOLOAD):
|
||||||
{
|
{
|
||||||
. = ALIGN(4);
|
. = ALIGN(4);
|
||||||
PROVIDE ( end = . );
|
PROVIDE ( end = . );
|
||||||
|
|
|
@ -1,9 +1,8 @@
|
||||||
#!/bin/sh
|
#!/bin/sh
|
||||||
|
|
||||||
#production binary for bootloader
|
|
||||||
#dfu-util -a 0 --dfuse-address 0x08010000 -D /tmp/ArduCopter.build/f4light_Revolution.bin
|
|
||||||
|
|
||||||
# bare metal binary
|
# bare metal binary
|
||||||
#dfu-util -a 0 --dfuse-address 0x08000000:unprotect:force -D /tmp/ArduCopter.build/f4light_Revolution.bin
|
#dfu-util -a 0 --dfuse-address 0x08000000:unprotect:force -D /tmp/ArduCopter.build/f4light_Revolution.bin
|
||||||
dfu-util -a 0 --dfuse-address 0x08000000:leave -D ../../../../../ArduPlane/f4light_Revolution.bin -R
|
|
||||||
|
#production binary for bootloader
|
||||||
|
dfu-util -a 0 --dfuse-address 0x08010000:leave -D ../../../../../ArduPlane/f4light_Revolution.bin -R
|
||||||
|
|
||||||
|
|
|
@ -5,5 +5,5 @@
|
||||||
|
|
||||||
# bare metal binary
|
# bare metal binary
|
||||||
#dfu-util -a 0 --dfuse-address 0x08000000:unprotect:force -D /tmp/ArduCopter.build/f4light_Revolution.bin
|
#dfu-util -a 0 --dfuse-address 0x08000000:unprotect:force -D /tmp/ArduCopter.build/f4light_Revolution.bin
|
||||||
dfu-util -a 0 --dfuse-address 0x08000000:leave -D ../../../../../ArduCopter/f4light_Revolution.bin -R
|
dfu-util -a 0 --dfuse-address 0x08010000:leave -D ../../../../../ArduCopter/f4light_Revolution.bin -R
|
||||||
|
|
||||||
|
|
|
@ -1,9 +1,12 @@
|
||||||
#!/bin/sh
|
#!/bin/sh
|
||||||
|
|
||||||
# production binary with bootloader
|
# production binary without bootloader
|
||||||
#/usr/local/stlink/st-flash --reset write /tmp/ArduCopter.build/f4light_Revolution.bin 0x08010000
|
#/usr/local/stlink/st-flash --reset write /tmp/ArduCopter.build/f4light_Revolution.bin 0x08010000
|
||||||
|
|
||||||
#bare metal binary
|
#bare metal binary or binary with bootloader
|
||||||
/usr/local/stlink/st-flash --reset write ../../../../../ArduCopter/f4light_Revolution.bin 0x08000000 && /usr/local/stlink/st-util -m
|
/usr/local/stlink/st-flash --reset read eeprom.bin 0x08004000 0xc000 && \
|
||||||
|
/usr/local/stlink/st-flash --reset write ../../../../../ArduCopter/f4light_Revolution_bl.bin 0x08000000 && \
|
||||||
|
/usr/local/stlink/st-flash --reset write eeprom.bin 0x08004000 && \
|
||||||
|
/usr/local/stlink/st-util -m
|
||||||
|
|
||||||
|
|
||||||
|
|
|
@ -4,6 +4,9 @@
|
||||||
#/usr/local/stlink/st-flash --reset write /tmp/ArduCopter.build/f4light_Revolution.bin 0x08010000
|
#/usr/local/stlink/st-flash --reset write /tmp/ArduCopter.build/f4light_Revolution.bin 0x08010000
|
||||||
|
|
||||||
#bare metal binary
|
#bare metal binary
|
||||||
/usr/local/stlink/st-flash --reset write ../../../../../ArduPlane/f4light_Revolution.bin 0x08000000 && /usr/local/stlink/st-util -m
|
/usr/local/stlink/st-flash --reset read eeprom.bin 0x08004000 0xc000 && \
|
||||||
|
/usr/local/stlink/st-flash --reset write ../../../../../ArduPlane/f4light_Revolution_bl.bin 0x08000000 && \
|
||||||
|
/usr/local/stlink/st-flash --reset write eeprom.bin 0x08004000 && \
|
||||||
|
/usr/local/stlink/st-util -m
|
||||||
|
|
||||||
|
|
||||||
|
|
|
@ -6,6 +6,10 @@
|
||||||
FLASH_SIZE := 1048576
|
FLASH_SIZE := 1048576
|
||||||
SRAM_SIZE := 131072
|
SRAM_SIZE := 131072
|
||||||
|
|
||||||
|
BOARD_TYPE := 70
|
||||||
|
BOARD_REV := 4
|
||||||
|
BOOTLOADER := revo405_bl
|
||||||
|
|
||||||
# Memory target-specific configuration values
|
# Memory target-specific configuration values
|
||||||
|
|
||||||
ifeq ($(MEMORY_TARGET), ram)
|
ifeq ($(MEMORY_TARGET), ram)
|
||||||
|
|
|
@ -128,7 +128,7 @@ SECTIONS
|
||||||
|
|
||||||
/* Uninitialized data section */
|
/* Uninitialized data section */
|
||||||
. = ALIGN(4);
|
. = ALIGN(4);
|
||||||
.bss :
|
.bss (NOLOAD):
|
||||||
{
|
{
|
||||||
/* This is used by the startup in order to initialize the .bss secion */
|
/* This is used by the startup in order to initialize the .bss secion */
|
||||||
_sbss = .; /* define a global symbol at bss start */
|
_sbss = .; /* define a global symbol at bss start */
|
||||||
|
@ -143,7 +143,7 @@ SECTIONS
|
||||||
} >RAM
|
} >RAM
|
||||||
|
|
||||||
/* User_heap_stack section, used to check that there is enough RAM left */
|
/* User_heap_stack section, used to check that there is enough RAM left */
|
||||||
._user_heap_stack :
|
._user_heap_stack (NOLOAD):
|
||||||
{
|
{
|
||||||
. = ALIGN(4);
|
. = ALIGN(4);
|
||||||
PROVIDE ( end = . );
|
PROVIDE ( end = . );
|
||||||
|
@ -163,7 +163,7 @@ SECTIONS
|
||||||
*(.mb1rodata*)
|
*(.mb1rodata*)
|
||||||
} >MEMORY_B1
|
} >MEMORY_B1
|
||||||
|
|
||||||
.ccm : {
|
.ccm (NOLOAD): {
|
||||||
. = ALIGN(4);
|
. = ALIGN(4);
|
||||||
_sccm = .;
|
_sccm = .;
|
||||||
*(.ccm)
|
*(.ccm)
|
||||||
|
|
|
@ -1,170 +0,0 @@
|
||||||
/*
|
|
||||||
*****************************************************************************
|
|
||||||
**
|
|
||||||
** File : stm32_flash.ld
|
|
||||||
**
|
|
||||||
** Abstract : Linker script for STM32F407VG Device with
|
|
||||||
** 1024KByte FLASH, 128KByte RAM
|
|
||||||
**
|
|
||||||
** Set heap size, stack size and stack location according
|
|
||||||
** to application requirements.
|
|
||||||
**
|
|
||||||
** Set memory bank area and size if external memory is used.
|
|
||||||
**
|
|
||||||
** Target : STMicroelectronics STM32
|
|
||||||
**
|
|
||||||
** Environment : Atollic TrueSTUDIO(R)
|
|
||||||
**
|
|
||||||
** Distribution: The file is distributed “as is,” without any warranty
|
|
||||||
** of any kind.
|
|
||||||
**
|
|
||||||
** (c)Copyright Atollic AB.
|
|
||||||
** You may use this file as-is or modify it according to the needs of your
|
|
||||||
** project. Distribution of this file (unmodified or modified) is not
|
|
||||||
** permitted. Atollic AB permit registered Atollic TrueSTUDIO(R) users the
|
|
||||||
** rights to distribute the assembled, compiled & linked contents of this
|
|
||||||
** file as part of an application binary file, provided that it is built
|
|
||||||
** using the Atollic TrueSTUDIO(R) toolchain.
|
|
||||||
**
|
|
||||||
*****************************************************************************
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Entry Point */
|
|
||||||
ENTRY(Reset_Handler)
|
|
||||||
|
|
||||||
/* Highest address of the user mode stack */
|
|
||||||
_estack = 0x10010000; /* end of 64k CCM */
|
|
||||||
|
|
||||||
/* Generate a link error if heap and stack don't fit into RAM */
|
|
||||||
_Min_Heap_Size = 0; /* required amount of heap */
|
|
||||||
_Min_Stack_Size = 0x800; /* required amount of stack */
|
|
||||||
|
|
||||||
/* Specify the memory areas */
|
|
||||||
MEMORY
|
|
||||||
{
|
|
||||||
FLASH (rx) : ORIGIN = 0x08020000, LENGTH = 896K
|
|
||||||
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K
|
|
||||||
MEMORY_B1 (rx) : ORIGIN = 0x60000000, LENGTH = 0K
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Define output sections */
|
|
||||||
SECTIONS
|
|
||||||
{
|
|
||||||
/* The startup code goes first into FLASH */
|
|
||||||
.isr_vector :
|
|
||||||
{
|
|
||||||
. = ALIGN(4);
|
|
||||||
KEEP(*(.isr_vector)) /* Startup code */
|
|
||||||
. = ALIGN(4);
|
|
||||||
} >FLASH
|
|
||||||
|
|
||||||
/* The program code and other data goes into FLASH */
|
|
||||||
.text :
|
|
||||||
{
|
|
||||||
. = ALIGN(4);
|
|
||||||
*(.text) /* .text sections (code) */
|
|
||||||
*(.text*) /* .text* sections (code) */
|
|
||||||
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
|
||||||
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
|
||||||
*(.glue_7) /* glue arm to thumb code */
|
|
||||||
*(.glue_7t) /* glue thumb to arm code */
|
|
||||||
*(.eh_frame)
|
|
||||||
|
|
||||||
KEEP (*(.init))
|
|
||||||
KEEP (*(.fini))
|
|
||||||
|
|
||||||
. = ALIGN(4);
|
|
||||||
_etext = .; /* define a global symbols at end of code */
|
|
||||||
} >FLASH
|
|
||||||
|
|
||||||
|
|
||||||
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
|
|
||||||
.ARM : {
|
|
||||||
__exidx_start = .;
|
|
||||||
*(.ARM.exidx*)
|
|
||||||
__exidx_end = .;
|
|
||||||
} >FLASH
|
|
||||||
|
|
||||||
.preinit_array :
|
|
||||||
{
|
|
||||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
|
||||||
KEEP (*(.preinit_array*))
|
|
||||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
|
||||||
} >FLASH
|
|
||||||
.init_array :
|
|
||||||
{
|
|
||||||
PROVIDE_HIDDEN (__init_array_start = .);
|
|
||||||
KEEP (*(SORT(.init_array.*)))
|
|
||||||
KEEP (*(.init_array*))
|
|
||||||
PROVIDE_HIDDEN (__init_array_end = .);
|
|
||||||
} >FLASH
|
|
||||||
.fini_array :
|
|
||||||
{
|
|
||||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
|
||||||
KEEP (*(.fini_array*))
|
|
||||||
KEEP (*(SORT(.fini_array.*)))
|
|
||||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
|
||||||
} >FLASH
|
|
||||||
|
|
||||||
/* used by the startup to initialize data */
|
|
||||||
_sidata = .;
|
|
||||||
|
|
||||||
/* Initialized data sections goes into RAM, load LMA copy after code */
|
|
||||||
.data :
|
|
||||||
{
|
|
||||||
. = ALIGN(4);
|
|
||||||
_sdata = .; /* create a global symbol at data start */
|
|
||||||
*(.data) /* .data sections */
|
|
||||||
*(.data*) /* .data* sections */
|
|
||||||
|
|
||||||
. = ALIGN(4);
|
|
||||||
_edata = .; /* define a global symbol at data end */
|
|
||||||
} >RAM AT> FLASH
|
|
||||||
|
|
||||||
/* Uninitialized data section */
|
|
||||||
. = ALIGN(4);
|
|
||||||
.bss :
|
|
||||||
{
|
|
||||||
/* This is used by the startup in order to initialize the .bss secion */
|
|
||||||
_sbss = .; /* define a global symbol at bss start */
|
|
||||||
__bss_start__ = _sbss;
|
|
||||||
*(.bss)
|
|
||||||
*(.bss*)
|
|
||||||
*(COMMON)
|
|
||||||
|
|
||||||
. = ALIGN(4);
|
|
||||||
_ebss = .; /* define a global symbol at bss end */
|
|
||||||
__bss_end__ = _ebss;
|
|
||||||
} >RAM
|
|
||||||
|
|
||||||
/* User_heap_stack section, used to check that there is enough RAM left */
|
|
||||||
._user_heap_stack :
|
|
||||||
{
|
|
||||||
. = ALIGN(4);
|
|
||||||
PROVIDE ( end = . );
|
|
||||||
PROVIDE ( _end = . );
|
|
||||||
. = . + _Min_Heap_Size;
|
|
||||||
. = . + _Min_Stack_Size;
|
|
||||||
. = ALIGN(4);
|
|
||||||
} >RAM
|
|
||||||
|
|
||||||
/* MEMORY_bank1 section, code must be located here explicitly */
|
|
||||||
/* Example: extern int foo(void) __attribute__ ((section (".mb1text"))); */
|
|
||||||
.memory_b1_text :
|
|
||||||
{
|
|
||||||
*(.mb1text) /* .mb1text sections (code) */
|
|
||||||
*(.mb1text*) /* .mb1text* sections (code) */
|
|
||||||
*(.mb1rodata) /* read-only data (constants) */
|
|
||||||
*(.mb1rodata*)
|
|
||||||
} >MEMORY_B1
|
|
||||||
|
|
||||||
/* Remove information from the standard libraries */
|
|
||||||
/DISCARD/ :
|
|
||||||
{
|
|
||||||
libc.a ( * )
|
|
||||||
libm.a ( * )
|
|
||||||
libgcc.a ( * )
|
|
||||||
}
|
|
||||||
|
|
||||||
.ARM.attributes 0 : { *(.ARM.attributes) }
|
|
||||||
}
|
|
|
@ -1 +1 @@
|
||||||
flash_8000000.ld
|
flash-10000.ld
|
|
@ -136,7 +136,7 @@ SECTIONS
|
||||||
|
|
||||||
/* Uninitialized data section */
|
/* Uninitialized data section */
|
||||||
. = ALIGN(4);
|
. = ALIGN(4);
|
||||||
.bss :
|
.bss (NOLOAD):
|
||||||
{
|
{
|
||||||
/* This is used by the startup in order to initialize the .bss secion */
|
/* This is used by the startup in order to initialize the .bss secion */
|
||||||
_sbss = .; /* define a global symbol at bss start */
|
_sbss = .; /* define a global symbol at bss start */
|
||||||
|
@ -151,7 +151,7 @@ SECTIONS
|
||||||
} >RAM
|
} >RAM
|
||||||
|
|
||||||
/* User_heap_stack section, used to check that there is enough RAM left */
|
/* User_heap_stack section, used to check that there is enough RAM left */
|
||||||
._user_heap_stack :
|
._user_heap_stack (NOLOAD):
|
||||||
{
|
{
|
||||||
. = ALIGN(4);
|
. = ALIGN(4);
|
||||||
PROVIDE ( end = . );
|
PROVIDE ( end = . );
|
||||||
|
|
|
@ -8,5 +8,5 @@
|
||||||
#dfu-util -a 0 --dfuse-address 0x08000000:unprotect:force -D /tmp/ArduCopter.build/f4light_Revolution.bin
|
#dfu-util -a 0 --dfuse-address 0x08000000:unprotect:force -D /tmp/ArduCopter.build/f4light_Revolution.bin
|
||||||
#dfu-util -a 0 --dfuse-address 0x08000000:leave -D ../../../../../ArduCopter/f4light_Revolution.bin -R
|
#dfu-util -a 0 --dfuse-address 0x08000000:leave -D ../../../../../ArduCopter/f4light_Revolution.bin -R
|
||||||
|
|
||||||
dfu-util -a 0 --dfuse-address 0x08000000:unprotect:force -D ../../../../../ArduCopter/f4light_cl_racing.bin -R
|
dfu-util -a 0 --dfuse-address 0x08010000:leave -D ../../../../../ArduCopter/f4light_cl_racing.bin -R
|
||||||
|
|
||||||
|
|
|
@ -4,6 +4,9 @@
|
||||||
#/usr/local/stlink/st-flash --reset write /tmp/ArduCopter.build/f4light_Revolution.bin 0x08010000
|
#/usr/local/stlink/st-flash --reset write /tmp/ArduCopter.build/f4light_Revolution.bin 0x08010000
|
||||||
|
|
||||||
#bare metal binary
|
#bare metal binary
|
||||||
/usr/local/stlink/st-flash --reset write ../../../../../ArduCopter/f4light_cl_racing.bin 0x08000000 && /usr/local/stlink/st-util -m
|
/usr/local/stlink/st-flash --reset read eeprom.bin 0x08004000 0xc000 && \
|
||||||
|
/usr/local/stlink/st-flash --reset write ../../../../../ArduCopter/f4light_cl_racing_bl.bin 0x08000000 && \
|
||||||
|
/usr/local/stlink/st-flash --reset write eeprom.bin 0x08004000 && \
|
||||||
|
/usr/local/stlink/st-util -m
|
||||||
|
|
||||||
|
|
||||||
|
|
|
@ -4,6 +4,9 @@
|
||||||
#/usr/local/stlink/st-flash --reset write /tmp/ArduCopter.build/f4light_Revolution.bin 0x08010000
|
#/usr/local/stlink/st-flash --reset write /tmp/ArduCopter.build/f4light_Revolution.bin 0x08010000
|
||||||
|
|
||||||
#bare metal binary
|
#bare metal binary
|
||||||
/usr/local/stlink/st-flash --reset write ../../../../../ArduPlane/f4light_cl_racing.bin 0x08000000 && /usr/local/stlink/st-util -m
|
/usr/local/stlink/st-flash --reset read eeprom.bin 0x08004000 0xc000 && \
|
||||||
|
/usr/local/stlink/st-flash --reset write ../../../../../ArduPlane/f4light_cl_racing_bl.bin 0x08000000 && \
|
||||||
|
/usr/local/stlink/st-flash --reset write eeprom.bin 0x08004000 && \
|
||||||
|
/usr/local/stlink/st-util -m
|
||||||
|
|
||||||
|
|
||||||
|
|
|
@ -6,6 +6,10 @@
|
||||||
FLASH_SIZE := 1048576
|
FLASH_SIZE := 1048576
|
||||||
SRAM_SIZE := 131072
|
SRAM_SIZE := 131072
|
||||||
|
|
||||||
|
BOARD_TYPE := 70
|
||||||
|
BOARD_REV := 5
|
||||||
|
BOOTLOADER := revo405_bl
|
||||||
|
|
||||||
# Memory target-specific configuration values
|
# Memory target-specific configuration values
|
||||||
|
|
||||||
ifeq ($(MEMORY_TARGET), ram)
|
ifeq ($(MEMORY_TARGET), ram)
|
||||||
|
|
|
@ -38,6 +38,9 @@ MEMORY_TARGET ?= flash
|
||||||
STFLASH := /usr/local/stlink/st-flash
|
STFLASH := /usr/local/stlink/st-flash
|
||||||
STUTIL := /usr/local/stlink/st-util
|
STUTIL := /usr/local/stlink/st-util
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
BL_ADDRESS := 0x08000000
|
||||||
FLASH_ADDRESS := 0x08010000
|
FLASH_ADDRESS := 0x08010000
|
||||||
|
|
||||||
UPLOADER := dfu-util
|
UPLOADER := dfu-util
|
||||||
|
@ -71,6 +74,10 @@ TOOLS_PATH := $(BLDROOT)/libraries/AP_HAL_F4Light/support/tools
|
||||||
LDDIR := $(BOARDS_PATH)/$(BOARD)/ld
|
LDDIR := $(BOARDS_PATH)/$(BOARD)/ld
|
||||||
|
|
||||||
|
|
||||||
|
BOOTLOADERS := $(BLDROOT)/Tools/bootloaders
|
||||||
|
APJTOOL := $(BLDROOT)/Tools/ardupilotwaf/px_mkfw.py
|
||||||
|
|
||||||
|
|
||||||
# $(BOARD)- and $(MEMORY_TARGET)-specific configuration
|
# $(BOARD)- and $(MEMORY_TARGET)-specific configuration
|
||||||
include $(BOARDS_PATH)/$(BOARD)/target-config.mk
|
include $(BOARDS_PATH)/$(BOARD)/target-config.mk
|
||||||
|
|
||||||
|
@ -343,9 +350,20 @@ $(BUILD_PATH)/$(BOARD).bin: $(SKETCHELF)
|
||||||
$(SILENT_DISAS) $(DISAS) -S $(SKETCHELF) > $(BUILD_PATH)/$(BOARD).disas
|
$(SILENT_DISAS) $(DISAS) -S $(SKETCHELF) > $(BUILD_PATH)/$(BOARD).disas
|
||||||
@echo " "
|
@echo " "
|
||||||
$(TOOLS_PATH)/dfu-convert --ihex $(BUILD_PATH)/$(BOARD).hex $(BUILD_PATH)/$(BOARD).dfu
|
$(TOOLS_PATH)/dfu-convert --ihex $(BUILD_PATH)/$(BOARD).hex $(BUILD_PATH)/$(BOARD).dfu
|
||||||
|
# python $(APJTOOL) --image $(BUILD_PATH)/$(BOARD).bin --prototype $(BUILDROOT)/apj.prototype > $(BUILD_PATH)/$(BOARD).apj
|
||||||
|
python $(APJTOOL) --image $(BUILD_PATH)/$(BOARD).bin --board_id $(BOARD_TYPE) --board_revision $(BOARD_REV) > $(BUILD_PATH)/$(BOARD).apj
|
||||||
|
dd if=/dev/zero ibs=1k count=64 | tr "\000" "\377" >$(BUILDROOT)/rom.bin
|
||||||
|
dd if=$(BOOTLOADERS)/$(BOOTLOADER).bin of=$(BUILDROOT)/rom.bin conv=notrunc
|
||||||
|
(printf '%02x %02x' "$(BOARD_TYPE)" "$(BOARD_REV)" ) | xxd -r -p - $(BUILDROOT)/board_id.bin
|
||||||
|
dd if=$(BUILDROOT)/board_id.bin of=$(BUILDROOT)/rom.bin obs=1 seek=16368 conv=notrunc
|
||||||
|
(cat $(BUILDROOT)/rom.bin; cat $(BUILD_PATH)/$(BOARD).bin) > $(BUILD_PATH)/$(BOARD)_bl.bin
|
||||||
|
$(TOOLS_PATH)/dfu-convert -b $(BL_ADDRESS):$(BUILDROOT)/rom.bin -b $(FLASH_ADDRESS):$(BUILD_PATH)/$(BOARD).bin $(BUILD_PATH)/$(BOARD)_bl.dfu
|
||||||
$(v)cp $(BUILD_PATH)/$(BOARD).hex .
|
$(v)cp $(BUILD_PATH)/$(BOARD).hex .
|
||||||
$(v)cp $(BUILD_PATH)/$(BOARD).bin .
|
$(v)cp $(BUILD_PATH)/$(BOARD).bin .
|
||||||
$(v)cp $(BUILD_PATH)/$(BOARD).dfu .
|
$(v)cp $(BUILD_PATH)/$(BOARD).dfu .
|
||||||
|
$(v)cp $(BUILD_PATH)/$(BOARD).apj .
|
||||||
|
$(v)cp $(BUILD_PATH)/$(BOARD)_bl.bin .
|
||||||
|
$(v)cp $(BUILD_PATH)/$(BOARD)_bl.dfu .
|
||||||
@echo "Object file sizes:"
|
@echo "Object file sizes:"
|
||||||
@find $(BUILD_PATH) -iname "*.o" | xargs $(SIZE) -t > $(BUILD_PATH)/$(BOARD).sizes
|
@find $(BUILD_PATH) -iname "*.o" | xargs $(SIZE) -t > $(BUILD_PATH)/$(BOARD).sizes
|
||||||
cd $(HAL_PATH); find . -follow -iname "*.o" | xargs $(SIZE) -t >> $(BUILD_PATH)/$(BOARD).sizes
|
cd $(HAL_PATH); find . -follow -iname "*.o" | xargs $(SIZE) -t >> $(BUILD_PATH)/$(BOARD).sizes
|
||||||
|
|
Loading…
Reference in New Issue