diff --git a/ArduPlane/Parameters.cpp b/ArduPlane/Parameters.cpp
index 95ccb06386..9a0c61bfe9 100644
--- a/ArduPlane/Parameters.cpp
+++ b/ArduPlane/Parameters.cpp
@@ -1184,6 +1184,13 @@ const AP_Param::GroupInfo ParametersG2::var_info[] = {
     // @User: Standard
     AP_GROUPINFO("RUDD_DT_GAIN", 9, ParametersG2, rudd_dt_gain, 10),
 
+    // @Param: MANUAL_RCMASK
+    // @DisplayName: Manual R/C pass-through mask
+    // @Description: Mask of R/C channels to pass directly to corresponding output channel when in MANUAL mode. When in any more except MANUAL the channels selected with this option behave normally. This parameter is designed to allow for complex mixing strategies to be used for MANUAL flight using transmitter based mixing. Note that when this option is used you need to be very careful with pre-flight checks to ensure that the output is correct both in MANUAL and non-MANUAL modes.
+    // @Bitmask: 0:Chan1,1:Chan2,2:Chan3,3:Chan4,4:Chan5,5:Chan6,6:Chan7,7:Chan8,8:Chan9,9:Chan10,10:Chan11,11:Chan12,12:Chan13,13:Chan14,14:Chan15,15:Chan16
+    // @User: Advanced
+    AP_GROUPINFO("MANUAL_RCMASK", 10, ParametersG2, manual_rc_mask, 0),
+    
     AP_GROUPEND
 };
 
diff --git a/ArduPlane/Parameters.h b/ArduPlane/Parameters.h
index 072cddd2bb..d4da95fe9c 100644
--- a/ArduPlane/Parameters.h
+++ b/ArduPlane/Parameters.h
@@ -542,6 +542,9 @@ public:
 
     // dual motor tailsitter rudder to differential thrust scaling: 0-100%
     AP_Int8 rudd_dt_gain;
+
+    // mask of channels to do manual pass-thru for
+    AP_Int32 manual_rc_mask;
 };
 
 extern const AP_Param::Info var_info[];
diff --git a/ArduPlane/px4_mixer.cpp b/ArduPlane/px4_mixer.cpp
index 5683073416..65e2f8f9a3 100644
--- a/ArduPlane/px4_mixer.cpp
+++ b/ArduPlane/px4_mixer.cpp
@@ -209,8 +209,14 @@ uint16_t Plane::create_mixer(char *buf, uint16_t buf_size, const char *filename)
 {
     char *buf0 = buf;
     uint16_t buf_size0 = buf_size;
+    uint16_t manual_mask = uint16_t(g2.manual_rc_mask.get());
 
     for (uint8_t i=0; i<8; i++) {
+        if ((1U<<i) & manual_mask) {
+            // handle MANUAL_RCMASK channels
+            mix_passthrough(buf, buf_size, i, i);
+            continue;
+        }
         SRV_Channel::Aux_servo_function_t function = SRV_Channels::channel_function(i);
         switch (function) {
         case SRV_Channel::k_aileron:
diff --git a/ArduPlane/servos.cpp b/ArduPlane/servos.cpp
index 03ad6490aa..c4aa35fc06 100644
--- a/ArduPlane/servos.cpp
+++ b/ArduPlane/servos.cpp
@@ -757,8 +757,13 @@ void Plane::servos_output(void)
     // run vtail and elevon mixers
     servo_output_mixers();
 
-    SRV_Channels::calc_pwm();
+    // support MANUAL_RCMASK
+    if (g2.manual_rc_mask.get() != 0) {
+        SRV_Channels::copy_radio_in_out_mask(uint16_t(g2.manual_rc_mask.get()));
+    }
     
+    SRV_Channels::calc_pwm();
+
     SRV_Channels::output_ch_all();
     
     hal.rcout->push();