mirror of https://github.com/ArduPilot/ardupilot
remove I2C library, deprecated under AP_HAL
This commit is contained in:
Pat Hickey
Andrew Tridgell
parent
db31608aa2
commit
bc4b196f6f
|
|
@ -1,585 +0,0 @@
|
|||
/*
|
||||
* I2C.cpp - I2C library
|
||||
* Copyright (c) 2011 Wayne Truchsess. All right reserved.
|
||||
* Rev 2.0 - September 19th, 2011
|
||||
* - Added support for timeout function to prevent
|
||||
* and recover from bus lockup (thanks to PaulS
|
||||
* and CrossRoads on the Arduino forum)
|
||||
* - Changed return type for stop() from void to
|
||||
* uint8_t to handle timeOut function
|
||||
* Rev 1.0 - August 8th, 2011
|
||||
*
|
||||
* This is a modified version of the Arduino Wire/TWI
|
||||
* library. Functions were rewritten to provide more functionality
|
||||
* and also the use of Repeated Start. Some I2C devices will not
|
||||
* function correctly without the use of a Repeated Start. The
|
||||
* initial version of this library only supports the Master.
|
||||
*
|
||||
*
|
||||
* This library is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU Lesser General Public
|
||||
* License as published by the Free Software Foundation; either
|
||||
* version 2.1 of the License, or (at your option) any later version.
|
||||
*
|
||||
* This library is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
* Lesser General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU Lesser General Public
|
||||
* License along with this library; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#include <AP_Common.h>
|
||||
#include "I2C.h"
|
||||
|
||||
|
||||
|
||||
uint8_t I2C::bytesAvailable = 0;
|
||||
uint8_t I2C::bufferIndex = 0;
|
||||
uint8_t I2C::totalBytes = 0;
|
||||
uint16_t I2C::timeOutDelay = 0;
|
||||
|
||||
I2C::I2C()
|
||||
{
|
||||
}
|
||||
|
||||
|
||||
////////////// Public Methods ////////////////////////////////////////
|
||||
|
||||
|
||||
|
||||
void I2C::begin()
|
||||
{
|
||||
#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega8__) || defined(__AVR_ATmega328P__)
|
||||
// activate internal pull-ups for twi
|
||||
// as per note from atmega8 manual pg167
|
||||
sbi(PORTC, 4);
|
||||
sbi(PORTC, 5);
|
||||
#else
|
||||
// activate internal pull-ups for twi
|
||||
// as per note from atmega128 manual pg204
|
||||
sbi(PORTD, 0);
|
||||
sbi(PORTD, 1);
|
||||
#endif
|
||||
// initialize twi prescaler and bit rate
|
||||
cbi(TWSR, TWPS0);
|
||||
cbi(TWSR, TWPS1);
|
||||
TWBR = ((CPU_FREQ / 100000) - 16) / 2;
|
||||
// enable twi module, acks, and twi interrupt
|
||||
TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA);
|
||||
}
|
||||
|
||||
void I2C::end()
|
||||
{
|
||||
TWCR = 0;
|
||||
}
|
||||
|
||||
void I2C::timeOut(uint16_t _timeOut)
|
||||
{
|
||||
timeOutDelay = _timeOut;
|
||||
}
|
||||
|
||||
void I2C::setSpeed(boolean _fast)
|
||||
{
|
||||
if(!_fast)
|
||||
{
|
||||
TWBR = ((CPU_FREQ / 100000) - 16) / 2;
|
||||
}
|
||||
else
|
||||
{
|
||||
TWBR = ((CPU_FREQ / 400000) - 16) / 2;
|
||||
}
|
||||
}
|
||||
|
||||
void I2C::pullup(boolean activate)
|
||||
{
|
||||
if(activate)
|
||||
{
|
||||
#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega8__) || defined(__AVR_ATmega328P__)
|
||||
// activate internal pull-ups for twi
|
||||
// as per note from atmega8 manual pg167
|
||||
sbi(PORTC, 4);
|
||||
sbi(PORTC, 5);
|
||||
#else
|
||||
// activate internal pull-ups for twi
|
||||
// as per note from atmega128 manual pg204
|
||||
sbi(PORTD, 0);
|
||||
sbi(PORTD, 1);
|
||||
#endif
|
||||
}
|
||||
else
|
||||
{
|
||||
#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega8__) || defined(__AVR_ATmega328P__)
|
||||
// deactivate internal pull-ups for twi
|
||||
// as per note from atmega8 manual pg167
|
||||
cbi(PORTC, 4);
|
||||
cbi(PORTC, 5);
|
||||
#else
|
||||
// deactivate internal pull-ups for twi
|
||||
// as per note from atmega128 manual pg204
|
||||
cbi(PORTD, 0);
|
||||
cbi(PORTD, 1);
|
||||
#endif
|
||||
}
|
||||
}
|
||||
|
||||
/////////////carry over from Wire library ///////////
|
||||
|
||||
uint8_t I2C::beginTransmission(uint8_t address)
|
||||
{
|
||||
returnStatusWire = 0;
|
||||
returnStatus = 0;
|
||||
returnStatus = start();
|
||||
returnStatusWire = returnStatus;
|
||||
if(returnStatus) {return(returnStatus); }
|
||||
returnStatus = sendAddress(SLA_W(address));
|
||||
returnStatusWire = returnStatus;
|
||||
return(returnStatus);
|
||||
}
|
||||
|
||||
uint8_t I2C::beginTransmission(int address)
|
||||
{
|
||||
return(beginTransmission((uint8_t) address));
|
||||
}
|
||||
|
||||
uint8_t I2C::send(uint8_t databyte)
|
||||
{
|
||||
if(returnStatusWire)
|
||||
{
|
||||
return(returnStatusWire);
|
||||
}
|
||||
returnStatus = 0;
|
||||
returnStatus = sendByte(databyte);
|
||||
returnStatusWire = returnStatus;
|
||||
return(returnStatus);
|
||||
}
|
||||
|
||||
uint8_t I2C::send(int databyte)
|
||||
{
|
||||
return(send((uint8_t) databyte));
|
||||
}
|
||||
|
||||
uint8_t I2C::endTransmission()
|
||||
{
|
||||
stop();
|
||||
return(returnStatusWire);
|
||||
}
|
||||
|
||||
uint8_t I2C::requestFrom(int address, int numberBytes)
|
||||
{
|
||||
return(requestFrom((uint8_t) address, (uint8_t) numberBytes));
|
||||
}
|
||||
|
||||
uint8_t I2C::requestFrom(uint8_t address, uint8_t numberBytes)
|
||||
{
|
||||
returnStatus = 0;
|
||||
returnStatus = read(address,numberBytes);
|
||||
if(!returnStatus)
|
||||
{
|
||||
return(numberBytes);
|
||||
}
|
||||
return(0);
|
||||
}
|
||||
|
||||
uint8_t I2C::available()
|
||||
{
|
||||
return(bytesAvailable);
|
||||
}
|
||||
|
||||
uint8_t I2C::receive()
|
||||
{
|
||||
bufferIndex = totalBytes - bytesAvailable;
|
||||
if(!bytesAvailable)
|
||||
{
|
||||
bufferIndex = 0;
|
||||
return(0);
|
||||
}
|
||||
bytesAvailable--;
|
||||
return(data[bufferIndex]);
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
/////////////////////////////////////////////////////
|
||||
|
||||
uint8_t I2C::write(uint8_t address, uint8_t registerAddress)
|
||||
{
|
||||
returnStatus = 0;
|
||||
returnStatus = start();
|
||||
if(returnStatus) {return(returnStatus); }
|
||||
returnStatus = sendAddress(SLA_W(address));
|
||||
if(returnStatus) {return(returnStatus); }
|
||||
returnStatus = sendByte(registerAddress);
|
||||
if(returnStatus) {return(returnStatus); }
|
||||
returnStatus = stop();
|
||||
return(returnStatus);
|
||||
}
|
||||
|
||||
uint8_t I2C::write(int address, int registerAddress)
|
||||
{
|
||||
return(write((uint8_t) address, (uint8_t) registerAddress));
|
||||
}
|
||||
|
||||
uint8_t I2C::write(uint8_t address, uint8_t registerAddress, uint8_t databyte)
|
||||
{
|
||||
returnStatus = 0;
|
||||
returnStatus = start();
|
||||
if(returnStatus) {return(returnStatus); }
|
||||
returnStatus = sendAddress(SLA_W(address));
|
||||
if(returnStatus) {return(returnStatus); }
|
||||
returnStatus = sendByte(registerAddress);
|
||||
if(returnStatus) {return(returnStatus); }
|
||||
returnStatus = sendByte(databyte);
|
||||
if(returnStatus) {return(returnStatus); }
|
||||
returnStatus = stop();
|
||||
return(returnStatus);
|
||||
}
|
||||
|
||||
uint8_t I2C::write(int address, int registerAddress, int databyte)
|
||||
{
|
||||
return(write((uint8_t) address, (uint8_t) registerAddress, (uint8_t) databyte));
|
||||
}
|
||||
|
||||
uint8_t I2C::write(uint8_t address, uint8_t registerAddress, char *databytes)
|
||||
{
|
||||
uint8_t bufferLength = strlen(databytes);
|
||||
returnStatus = 0;
|
||||
returnStatus = write(address, registerAddress, (uint8_t*)databytes, bufferLength);
|
||||
return(returnStatus);
|
||||
}
|
||||
|
||||
uint8_t I2C::write(uint8_t address, uint8_t registerAddress, uint8_t *databytes, uint8_t numberBytes)
|
||||
{
|
||||
returnStatus = 0;
|
||||
returnStatus = start();
|
||||
if(returnStatus) {return(returnStatus); }
|
||||
returnStatus = sendAddress(SLA_W(address));
|
||||
if(returnStatus) {return(returnStatus); }
|
||||
returnStatus = sendByte(registerAddress);
|
||||
if(returnStatus) {return(returnStatus); }
|
||||
for (uint8_t i = 0; i < numberBytes; i++)
|
||||
{
|
||||
returnStatus = sendByte(databytes[i]);
|
||||
if(returnStatus) {return(returnStatus); }
|
||||
}
|
||||
returnStatus = stop();
|
||||
return(returnStatus);
|
||||
}
|
||||
|
||||
uint8_t I2C::read(int address, int numberBytes)
|
||||
{
|
||||
return(read((uint8_t) address, (uint8_t) numberBytes));
|
||||
}
|
||||
|
||||
uint8_t I2C::read(uint8_t address, uint8_t numberBytes)
|
||||
{
|
||||
bytesAvailable = 0;
|
||||
bufferIndex = 0;
|
||||
if(numberBytes == 0) {numberBytes++; }
|
||||
nack = numberBytes - 1;
|
||||
returnStatus = 0;
|
||||
returnStatus = start();
|
||||
if(returnStatus) {return(returnStatus); }
|
||||
returnStatus = sendAddress(SLA_R(address));
|
||||
if(returnStatus) {return(returnStatus); }
|
||||
for(uint8_t i = 0; i < numberBytes; i++)
|
||||
{
|
||||
if( i == nack )
|
||||
{
|
||||
returnStatus = receiveByte(0);
|
||||
if(returnStatus != MR_DATA_NACK) {return(returnStatus); }
|
||||
}
|
||||
else
|
||||
{
|
||||
returnStatus = receiveByte(1);
|
||||
if(returnStatus != MR_DATA_ACK) {return(returnStatus); }
|
||||
}
|
||||
data[i] = TWDR;
|
||||
bytesAvailable = i+1;
|
||||
totalBytes = i+1;
|
||||
}
|
||||
returnStatus = stop();
|
||||
return(returnStatus);
|
||||
}
|
||||
|
||||
uint8_t I2C::read(int address, int registerAddress, int numberBytes)
|
||||
{
|
||||
return(read((uint8_t) address, (uint8_t) registerAddress, (uint8_t) numberBytes));
|
||||
}
|
||||
|
||||
uint8_t I2C::read(uint8_t address, uint8_t registerAddress, uint8_t numberBytes)
|
||||
{
|
||||
bytesAvailable = 0;
|
||||
bufferIndex = 0;
|
||||
if(numberBytes == 0) {numberBytes++; }
|
||||
nack = numberBytes - 1;
|
||||
returnStatus = 0;
|
||||
returnStatus = start();
|
||||
if(returnStatus) {return(returnStatus); }
|
||||
returnStatus = sendAddress(SLA_W(address));
|
||||
if(returnStatus) {return(returnStatus); }
|
||||
returnStatus = sendByte(registerAddress);
|
||||
if(returnStatus) {return(returnStatus); }
|
||||
returnStatus = start();
|
||||
if(returnStatus) {return(returnStatus); }
|
||||
returnStatus = sendAddress(SLA_R(address));
|
||||
if(returnStatus) {return(returnStatus); }
|
||||
for(uint8_t i = 0; i < numberBytes; i++)
|
||||
{
|
||||
if( i == nack )
|
||||
{
|
||||
returnStatus = receiveByte(0);
|
||||
if(returnStatus != MR_DATA_NACK) {return(returnStatus); }
|
||||
}
|
||||
else
|
||||
{
|
||||
returnStatus = receiveByte(1);
|
||||
if(returnStatus != MR_DATA_ACK) {return(returnStatus); }
|
||||
}
|
||||
data[i] = TWDR;
|
||||
bytesAvailable = i+1;
|
||||
totalBytes = i+1;
|
||||
}
|
||||
returnStatus = stop();
|
||||
return(returnStatus);
|
||||
}
|
||||
|
||||
uint8_t I2C::read(uint8_t address, uint8_t numberBytes, uint8_t *dataBuffer)
|
||||
{
|
||||
bytesAvailable = 0;
|
||||
bufferIndex = 0;
|
||||
if(numberBytes == 0) {numberBytes++; }
|
||||
nack = numberBytes - 1;
|
||||
returnStatus = 0;
|
||||
returnStatus = start();
|
||||
if(returnStatus) {return(returnStatus); }
|
||||
returnStatus = sendAddress(SLA_R(address));
|
||||
if(returnStatus) {return(returnStatus); }
|
||||
for(uint8_t i = 0; i < numberBytes; i++)
|
||||
{
|
||||
if( i == nack )
|
||||
{
|
||||
returnStatus = receiveByte(0);
|
||||
if(returnStatus != MR_DATA_NACK) {return(returnStatus); }
|
||||
}
|
||||
else
|
||||
{
|
||||
returnStatus = receiveByte(1);
|
||||
if(returnStatus != MR_DATA_ACK) {return(returnStatus); }
|
||||
}
|
||||
dataBuffer[i] = TWDR;
|
||||
bytesAvailable = i+1;
|
||||
totalBytes = i+1;
|
||||
}
|
||||
returnStatus = stop();
|
||||
return(returnStatus);
|
||||
}
|
||||
|
||||
uint8_t I2C::read(uint8_t address, uint8_t registerAddress, uint8_t numberBytes, uint8_t *dataBuffer)
|
||||
{
|
||||
bytesAvailable = 0;
|
||||
bufferIndex = 0;
|
||||
if(numberBytes == 0) {numberBytes++; }
|
||||
nack = numberBytes - 1;
|
||||
returnStatus = 0;
|
||||
returnStatus = start();
|
||||
if (returnStatus) {
|
||||
_lockup_count++;
|
||||
return(returnStatus);
|
||||
}
|
||||
returnStatus = sendAddress(SLA_W(address));
|
||||
if(returnStatus) {
|
||||
_lockup_count++;
|
||||
return(returnStatus);
|
||||
}
|
||||
returnStatus = sendByte(registerAddress);
|
||||
if(returnStatus) {
|
||||
_lockup_count++;
|
||||
return(returnStatus);
|
||||
}
|
||||
returnStatus = start();
|
||||
if(returnStatus) {
|
||||
_lockup_count++;
|
||||
return(returnStatus);
|
||||
}
|
||||
returnStatus = sendAddress(SLA_R(address));
|
||||
if(returnStatus) {
|
||||
_lockup_count++;
|
||||
return(returnStatus);
|
||||
}
|
||||
for(uint8_t i = 0; i < numberBytes; i++)
|
||||
{
|
||||
if( i == nack )
|
||||
{
|
||||
returnStatus = receiveByte(0);
|
||||
if (returnStatus != MR_DATA_NACK) {
|
||||
_lockup_count++;
|
||||
return(returnStatus);
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
returnStatus = receiveByte(1);
|
||||
if (returnStatus != MR_DATA_ACK) {
|
||||
_lockup_count++;
|
||||
return(returnStatus);
|
||||
}
|
||||
}
|
||||
dataBuffer[i] = TWDR;
|
||||
bytesAvailable = i+1;
|
||||
totalBytes = i+1;
|
||||
}
|
||||
returnStatus = stop();
|
||||
if (returnStatus) {
|
||||
_lockup_count++;
|
||||
}
|
||||
return(returnStatus);
|
||||
}
|
||||
|
||||
|
||||
/////////////// Private Methods ////////////////////////////////////////
|
||||
|
||||
|
||||
uint8_t I2C::start()
|
||||
{
|
||||
unsigned long startingTime = millis();
|
||||
TWCR = (1<<TWINT)|(1<<TWSTA)|(1<<TWEN);
|
||||
while (!(TWCR & (1<<TWINT)))
|
||||
{
|
||||
if(!timeOutDelay) {continue; }
|
||||
if((millis() - startingTime) >= timeOutDelay)
|
||||
{
|
||||
lockUp();
|
||||
return(1);
|
||||
}
|
||||
|
||||
}
|
||||
if ((TWI_STATUS == START) || (TWI_STATUS == REPEATED_START))
|
||||
{
|
||||
return(0);
|
||||
}
|
||||
return(TWI_STATUS);
|
||||
}
|
||||
|
||||
uint8_t I2C::sendAddress(uint8_t i2cAddress)
|
||||
{
|
||||
TWDR = i2cAddress;
|
||||
unsigned long startingTime = millis();
|
||||
TWCR = (1<<TWINT) | (1<<TWEN);
|
||||
while (!(TWCR & (1<<TWINT)))
|
||||
{
|
||||
if(!timeOutDelay) {continue; }
|
||||
if((millis() - startingTime) >= timeOutDelay)
|
||||
{
|
||||
lockUp();
|
||||
return(1);
|
||||
}
|
||||
|
||||
}
|
||||
if ((TWI_STATUS == MT_SLA_ACK) || (TWI_STATUS == MR_SLA_ACK))
|
||||
{
|
||||
return(0);
|
||||
}
|
||||
return(TWI_STATUS);
|
||||
}
|
||||
|
||||
uint8_t I2C::sendByte(uint8_t i2cData)
|
||||
{
|
||||
TWDR = i2cData;
|
||||
unsigned long startingTime = millis();
|
||||
TWCR = (1<<TWINT) | (1<<TWEN);
|
||||
while (!(TWCR & (1<<TWINT)))
|
||||
{
|
||||
if(!timeOutDelay) {continue; }
|
||||
if((millis() - startingTime) >= timeOutDelay)
|
||||
{
|
||||
lockUp();
|
||||
return(1);
|
||||
}
|
||||
|
||||
}
|
||||
if (TWI_STATUS == MT_DATA_ACK)
|
||||
{
|
||||
return(0);
|
||||
}
|
||||
return(TWI_STATUS);
|
||||
}
|
||||
|
||||
uint8_t I2C::receiveByte(boolean ack)
|
||||
{
|
||||
unsigned long startingTime = millis();
|
||||
if(ack)
|
||||
{
|
||||
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWEA);
|
||||
|
||||
}
|
||||
else
|
||||
{
|
||||
TWCR = (1<<TWINT) | (1<<TWEN);
|
||||
}
|
||||
while (!(TWCR & (1<<TWINT)))
|
||||
{
|
||||
if(!timeOutDelay) {continue; }
|
||||
if((millis() - startingTime) >= timeOutDelay)
|
||||
{
|
||||
lockUp();
|
||||
return(1);
|
||||
}
|
||||
|
||||
}
|
||||
return(TWI_STATUS);
|
||||
}
|
||||
|
||||
uint8_t I2C::stop()
|
||||
{
|
||||
unsigned long startingTime = millis();
|
||||
TWCR = (1<<TWINT)|(1<<TWEN)| (1<<TWSTO);
|
||||
while ((TWCR & (1<<TWSTO)))
|
||||
{
|
||||
if(!timeOutDelay) {continue; }
|
||||
if((millis() - startingTime) >= timeOutDelay)
|
||||
{
|
||||
lockUp();
|
||||
return(1);
|
||||
}
|
||||
|
||||
}
|
||||
return(0);
|
||||
}
|
||||
|
||||
void I2C::lockUp()
|
||||
{
|
||||
TWCR = 0; //releases SDA and SCL lines to high impedance
|
||||
TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA); //reinitialize TWI
|
||||
_lockup_count++;
|
||||
}
|
||||
|
||||
uint8_t I2C::lockup_count(void)
|
||||
{
|
||||
return _lockup_count;
|
||||
}
|
||||
|
||||
SIGNAL(TWI_vect)
|
||||
{
|
||||
switch(TWI_STATUS) {
|
||||
case 0x20:
|
||||
case 0x30:
|
||||
case 0x48:
|
||||
TWCR = (1<<TWINT)|(1<<TWEN)| (1<<TWSTO); // send a stop
|
||||
break;
|
||||
case 0x38:
|
||||
case 0x68:
|
||||
case 0x78:
|
||||
case 0xB0:
|
||||
TWCR = 0; //releases SDA and SCL lines to high impedance
|
||||
TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA); //reinitialize TWI
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
I2C I2c = I2C();
|
||||
|
|
@ -1,123 +0,0 @@
|
|||
/*
|
||||
* I2C.h - I2C library
|
||||
* Copyright (c) 2011 Wayne Truchsess. All right reserved.
|
||||
* Rev 2.0 - September 19th, 2011
|
||||
* - Added support for timeout function to prevent
|
||||
* and recover from bus lockup (thanks to PaulS
|
||||
* and CrossRoads on the Arduino forum)
|
||||
* - Changed return type for stop() from void to
|
||||
* uint8_t to handle timeOut function
|
||||
* Rev 1.0 - August 8th, 2011
|
||||
*
|
||||
* This is a modified version of the Arduino Wire/TWI
|
||||
* library. Functions were rewritten to provide more functionality
|
||||
* and also the use of Repeated Start. Some I2C devices will not
|
||||
* function correctly without the use of a Repeated Start. The
|
||||
* initial version of this library only supports the Master.
|
||||
*
|
||||
*
|
||||
* This library is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU Lesser General Public
|
||||
* License as published by the Free Software Foundation; either
|
||||
* version 2.1 of the License, or (at your option) any later version.
|
||||
*
|
||||
* This library is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
* Lesser General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU Lesser General Public
|
||||
* License along with this library; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#include <inttypes.h>
|
||||
#if defined(ARDUINO) && ARDUINO >= 100
|
||||
#include "Arduino.h"
|
||||
#else
|
||||
#include "WProgram.h"
|
||||
#endif
|
||||
|
||||
#ifndef I2C_h
|
||||
#define I2C_h
|
||||
|
||||
|
||||
#define START 0x08
|
||||
#define REPEATED_START 0x10
|
||||
#define MT_SLA_ACK 0x18
|
||||
#define MT_DATA_ACK 0x28
|
||||
#define MR_SLA_ACK 0x40
|
||||
#define MR_DATA_ACK 0x50
|
||||
#define MR_DATA_NACK 0x58
|
||||
#define TWI_STATUS (TWSR & 0xF8)
|
||||
#define SLA_W(address) (address << 1)
|
||||
#define SLA_R(address) ((address << 1) + 0x01)
|
||||
#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
|
||||
#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
|
||||
|
||||
#define MAX_BUFFER_SIZE 32
|
||||
|
||||
|
||||
#ifndef CPU_FREQ
|
||||
#define CPU_FREQ 16000000L
|
||||
#endif
|
||||
|
||||
|
||||
|
||||
class I2C
|
||||
{
|
||||
public:
|
||||
I2C();
|
||||
void begin();
|
||||
void end();
|
||||
void timeOut(uint16_t);
|
||||
void setSpeed(boolean);
|
||||
void pullup(boolean);
|
||||
///////carry over from Wire library////////
|
||||
uint8_t returnStatusWire;
|
||||
uint8_t beginTransmission(uint8_t);
|
||||
uint8_t beginTransmission(int);
|
||||
uint8_t send(uint8_t);
|
||||
uint8_t send(int);
|
||||
uint8_t endTransmission();
|
||||
uint8_t requestFrom(uint8_t, uint8_t);
|
||||
uint8_t requestFrom(int, int);
|
||||
uint8_t available();
|
||||
///////////////////////////////////////////
|
||||
uint8_t write(uint8_t, uint8_t);
|
||||
uint8_t write(int, int);
|
||||
uint8_t write(uint8_t, uint8_t, uint8_t);
|
||||
uint8_t write(int, int, int);
|
||||
uint8_t write(uint8_t, uint8_t, char*);
|
||||
uint8_t write(uint8_t, uint8_t, uint8_t*, uint8_t);
|
||||
uint8_t read(uint8_t, uint8_t);
|
||||
uint8_t read(int, int);
|
||||
uint8_t read(uint8_t, uint8_t, uint8_t);
|
||||
uint8_t read(int, int, int);
|
||||
uint8_t read(uint8_t, uint8_t, uint8_t*);
|
||||
uint8_t read(uint8_t, uint8_t, uint8_t, uint8_t*);
|
||||
uint8_t receive();
|
||||
uint8_t lockup_count();
|
||||
|
||||
private:
|
||||
uint8_t start();
|
||||
uint8_t sendAddress(uint8_t);
|
||||
uint8_t sendByte(uint8_t);
|
||||
uint8_t receiveByte(boolean);
|
||||
uint8_t stop();
|
||||
void lockUp();
|
||||
uint8_t returnStatus;
|
||||
uint8_t nack;
|
||||
uint8_t data[MAX_BUFFER_SIZE];
|
||||
uint8_t _lockup_count;
|
||||
|
||||
static uint8_t bytesAvailable;
|
||||
static uint8_t bufferIndex;
|
||||
static uint8_t totalBytes;
|
||||
static uint16_t timeOutDelay;
|
||||
|
||||
};
|
||||
|
||||
extern I2C I2c;
|
||||
|
||||
#endif
|
||||
|
|
@ -1,70 +0,0 @@
|
|||
/*******************************************
|
||||
* Sample sketch that configures an HMC5883L 3 axis
|
||||
* magnetometer to continuous mode and reads back
|
||||
* the three axis of data.
|
||||
* Code compiles to a size of 1500 bytes
|
||||
* Equivalent Wire Library code compiles to 2032 bytes
|
||||
*******************************************/
|
||||
|
||||
#include <I2C.h>
|
||||
|
||||
#define HMC5883L 0x1E
|
||||
|
||||
int x = 0;
|
||||
int y = 0;
|
||||
int z = 0;
|
||||
|
||||
|
||||
void setup()
|
||||
{
|
||||
I2c.begin();
|
||||
I2c.write(HMC5883L,0x02,0x00); //configure device for continuous mode
|
||||
}
|
||||
|
||||
void loop()
|
||||
{
|
||||
I2c.read(HMC5883L,0x03,6); //read 6 bytes (x,y,z) from the device
|
||||
x = I2c.receive() << 8;
|
||||
x |= I2c.receive();
|
||||
y = I2c.receive() << 8;
|
||||
y |= I2c.receive();
|
||||
z = I2c.receive() << 8;
|
||||
z |= I2c.receive();
|
||||
}
|
||||
|
||||
|
||||
/* Wire library equivalent would be this
|
||||
*
|
||||
* //#include <Wire.h>
|
||||
*
|
||||
* #define HMC5883L 0x1E
|
||||
*
|
||||
* int x = 0;
|
||||
* int y = 0;
|
||||
* int z = 0;
|
||||
*
|
||||
*
|
||||
* void setup()
|
||||
* {
|
||||
* Wire.begin();
|
||||
* Wire.beginTransmission(HMC5883L);
|
||||
* Wire.send(0x02);
|
||||
* Wire.send(0x00);
|
||||
* Wire.endTransmission();
|
||||
* }
|
||||
*
|
||||
* void loop()
|
||||
* {
|
||||
* Wire.beginTransmission(HMC5883L);
|
||||
* Wire.send(0x03);
|
||||
* Wire.endTransmission();
|
||||
* Wire.requestFrom(HMC5883L,6);
|
||||
* x = Wire.receive() << 8;
|
||||
* x |= Wire.receive();
|
||||
* y = Wire.receive() << 8;
|
||||
* y |= Wire.receive();
|
||||
* z = Wire.receive() << 8;
|
||||
* z |= Wire.receive();
|
||||
* }
|
||||
*
|
||||
********************************************/
|
||||
|
|
@ -1,36 +0,0 @@
|
|||
#######################################
|
||||
# Syntax Coloring Map For I2C
|
||||
#######################################
|
||||
|
||||
#######################################
|
||||
# Datatypes (KEYWORD1)
|
||||
#######################################
|
||||
|
||||
|
||||
#######################################
|
||||
# Methods and Functions (KEYWORD2)
|
||||
#######################################
|
||||
|
||||
begin KEYWORD2
|
||||
end KEYWORD2
|
||||
timeOut KEYWORD2
|
||||
setSpeed KEYWORD2
|
||||
pullup KEYWORD2
|
||||
write KEYWORD2
|
||||
read KEYWORD2
|
||||
beginTransmission KEYWORD2
|
||||
send KEYWORD2
|
||||
endTransmission KEYWORD2
|
||||
requestFrom KEYWORD2
|
||||
available KEYWORD2
|
||||
receive KEYWORD2
|
||||
|
||||
#######################################
|
||||
# Instances (KEYWORD2)
|
||||
#######################################
|
||||
|
||||
I2c KEYWORD2
|
||||
|
||||
#######################################
|
||||
# Constants (LITERAL1)
|
||||
#######################################
|
||||
Loading…
Reference in New Issue