mirror of
https://github.com/ArduPilot/ardupilot
synced 2025-01-03 14:38:30 -04:00
Rover: 4.4.0-beta1 release notes
This commit is contained in:
parent
3c99766a5a
commit
bbad767525
@ -1,5 +1,173 @@
|
|||||||
Rover Release Notes:
|
Rover Release Notes:
|
||||||
------------------------------------------------------------------
|
------------------------------------------------------------------
|
||||||
|
Rover 4.4.0-beta1 19-Apr-2023
|
||||||
|
Changes from 4.3.0-beta12
|
||||||
|
1) New autopilots supported
|
||||||
|
a) ESP32
|
||||||
|
b) Flywoo Goku F405S AIO
|
||||||
|
c) Foxeer H743v1
|
||||||
|
d) MambaF405-2022B
|
||||||
|
e) PixPilot-V3
|
||||||
|
f) PixSurveyA2
|
||||||
|
g) rFCU H743
|
||||||
|
h) ThePeach K1/R1
|
||||||
|
2) Autopilot specific changes
|
||||||
|
a) Bi-Directional DShot support for CubeOrangePlus-bdshot, Matek F405TE/VTOL-bdshot, Pixhawk6C-bdshot, QioTekZealotH743-bdshot
|
||||||
|
b) BlueRobotics Navigator supports baro on I2C bus 6
|
||||||
|
c) BMP280 baro only for BeastF7, KakuteF4, KakuteF7Mini, MambaF405, MatekF405, Omnibusf4 to reduce code size (aka "flash")
|
||||||
|
d) CSRF and Hott telemetry disabled by default on some low power boards (aka "minimised boards")
|
||||||
|
e) Foxeer Reaper F745 supports external compasses
|
||||||
|
f) OmnibusF4 support for BMI270 IMU
|
||||||
|
g) OmnibusF7V2-bdshot support removed
|
||||||
|
h) KakuteF7 regains displayport, frees up DMA from unused serial port
|
||||||
|
i) KakuteH7v2 gets second battery sensor
|
||||||
|
j) MambaH743v4 supports VTX
|
||||||
|
k) MatekF405-Wing supports InvensenseV3 IMUs
|
||||||
|
l) PixPilot-V6 heater enabled
|
||||||
|
m) Raspberry 64OS startup crash fixed
|
||||||
|
n) ReaperF745AIO serial protocol defaults fixed
|
||||||
|
o) SkystarsH7HD (non-bdshot) removed as users should always use -bdshot version
|
||||||
|
p) Skyviper loses many unnecessary features to save flash
|
||||||
|
q) UBlox GPS only for AtomRCF405NAVI, BeastF7, MatekF405, Omnibusf4 to reduce code size (aka "flash")
|
||||||
|
r) VRBrain-v52 and VRCore-v10 features reduced to save flash
|
||||||
|
3) Driver enhancements
|
||||||
|
a) ARK RTK GPS support
|
||||||
|
b) BMI088 IMU filtering and timing improved, ignores bad data
|
||||||
|
c) CRSF OSD may display disarmed state after flight mode (enabled using RC_OPTIONS)
|
||||||
|
d) Daiwa winch baud rate obeys SERIALx_BAUD parameter
|
||||||
|
e) EFI supports fuel pressure and ignition voltage reporting and battery failsafe
|
||||||
|
f) ICM45686 IMU support
|
||||||
|
g) ICM20602 uses fast reset instead of full reset on bad temperature sample (avoids occasional very high offset)
|
||||||
|
h) ICM45686 supports fast sampling
|
||||||
|
i) MAX31865 temp sensor support
|
||||||
|
j) MB85RS256TY-32k, PB85RS128C and PB85RS2MC FRAM support
|
||||||
|
k) MMC3416 compass orientation fix
|
||||||
|
l) MPPT battery monitor reliability improvements, enable/disable aux function and less spammy
|
||||||
|
m) Multiple USD-D1-CAN radar support
|
||||||
|
n) NMEA output rate configurable (see NMEA_RATE_MS)
|
||||||
|
o) NMEA output supports PASHR message (see NMEA_MSG_EN)
|
||||||
|
p) OSD supports average resting cell voltage (see OSD_ACRVOLT_xxx params)
|
||||||
|
q) Rockblock satellite modem support
|
||||||
|
r) Serial baud support for 2Mbps (only some hardware supports this speed)
|
||||||
|
s) SF45b lidar filtering reduced (allows detecting smaller obstacles
|
||||||
|
t) SmartAudio 2.0 learns all VTX power levels)
|
||||||
|
u) UAVCAN ESCs report error count using ESC Telemetry
|
||||||
|
v) Unicore GPS (e.g. UM982) support
|
||||||
|
w) VectorNav 100 external AHRS support
|
||||||
|
x) 5 IMUs supported
|
||||||
|
4) EKF related enhancements
|
||||||
|
a) External AHRS support for enabling only some sensors (e.g. IMU, Baro, Compass) see EAHRS_SENSORS
|
||||||
|
b) Magnetic field tables updated
|
||||||
|
c) Non-compass initial yaw alignment uses GPS course over GSF (mostly affects Planes and Rover)
|
||||||
|
5) Control and navigation enhancements
|
||||||
|
a) DO_SET_ROI_NONE command turns off ROI
|
||||||
|
b) JUMP_TAG mission item support
|
||||||
|
c) Manual mode steering expo configurable (see MANUAL_STR_EXPO)
|
||||||
|
d) Missions can be stored on SD card (see BRD_SD_MISSION)
|
||||||
|
e) NAV_SCRIPT_TIME command accepts floating point arguments
|
||||||
|
f) Pause/Resume returns success if mission is already paused or resumed
|
||||||
|
7) Camera and gimbal enhancements
|
||||||
|
a) BMMCC support included in Servo driver
|
||||||
|
b) DJI RS2/RS3-Pro gimbal support
|
||||||
|
c) Dual camera support (see CAM2_TYPE)
|
||||||
|
d) Gimbal/Mount2 can be moved to retracted or neutral position
|
||||||
|
e) Gremsy ZIO support
|
||||||
|
f) IMAGE_START_CAPTURE, SET_CAMERA_ZOOM/FOCUS, VIDEO_START/STOP_CAPTURE command support
|
||||||
|
g) Paramters renamed and rescaled
|
||||||
|
i) CAM_TRIGG_TYPE renamed to CAM1_TYPE and options have changed
|
||||||
|
ii) CAM_DURATION renamed to CAM1_DURATION and scaled in seconds
|
||||||
|
iii) CAM_FEEDBACK_PIN/POL renamed to CAM1_FEEBAK_PIN/POL
|
||||||
|
iv) CAM_MIN_INTERVAL renamed to CAM1_INTRVAL_MIN and scaled in seconds
|
||||||
|
v) CAM_TRIGG_DIST renamed to CAMx_TRIGG_DIST and accepts fractional values
|
||||||
|
h) RunCam2 4k support
|
||||||
|
i) ViewPro camera gimbal support
|
||||||
|
8) Logging changes
|
||||||
|
a) MCU log msg includes main CPU temp and voltage (was part of POWR message)
|
||||||
|
b) RCOut banner message always included in Logs
|
||||||
|
c) SCR message includes memory usage of all running scripts
|
||||||
|
d) CANS message includes CAN bus tx/rx statistics
|
||||||
|
e) Home location not logged to CMD message
|
||||||
|
9) Scripting enhancements
|
||||||
|
a) EFI Skypower driver gets improved telem messages and bug fixes
|
||||||
|
b) Generator throttle control example added
|
||||||
|
c) Heap max increased by allowing heap to be split across multiple underlying OS heaps
|
||||||
|
d) Hexsoon LEDs applet
|
||||||
|
e) Linter code checks for AP drivers and applets
|
||||||
|
f) Logging from scripts supports more formats
|
||||||
|
g) Parameters can be removed or reordered
|
||||||
|
h) Parameter description support (scripts must be in AP's applet or driver directory)
|
||||||
|
i) Rangefinder driver support
|
||||||
|
j) Runcam_on_arm applet starts recording when vehicle is armed
|
||||||
|
k) Safety switch, E-Stop and motor interlock support
|
||||||
|
l) Scripts can restart all scripts
|
||||||
|
m) Script_Controller applet supports inflight switching of active scripts
|
||||||
|
n) Skipcheck keywords supports skipping argument range checks
|
||||||
|
10) Custom build server enhancements
|
||||||
|
a) Battery, Camera and Compass drivers can be included/excluded
|
||||||
|
b) EKF3 wind estimation can be included/excluded
|
||||||
|
c) PCA9685, ToshibaLED, PLAY_TUNE notify drivers can be included/excluded
|
||||||
|
d) Preclanding can be included/excluded
|
||||||
|
e) RichenPower generator can be included/excluded
|
||||||
|
f) RC SRXL protocol can be excluded
|
||||||
|
g) SIRF GPSs can be included/excluded
|
||||||
|
11) Safety related enhancements and fixes
|
||||||
|
a) Arming check for servo outputs skipped when SERVOx_FUNCTION is scripting
|
||||||
|
b) Arming check fix if both "All" and other bitmasks are selected (previously only ran the other checks)
|
||||||
|
c) GCS failsafe timeout is configurable (see FS_GCS_TIMEOUT)
|
||||||
|
d) Pre-arm check that low and critical battery failsafe thresholds are different
|
||||||
|
e) Pre-arm message fixed if 2nd EKF core unhealthy
|
||||||
|
f) Pre-arm check if reboot required to enabled IMU batch sampling (used for vibe analysis)
|
||||||
|
g) RC failsafe timeout configurable (see RC_FS_TIMEOUT)
|
||||||
|
12) Minor enhancements
|
||||||
|
a) Boot time reduced by improving parameter conversion efficiency
|
||||||
|
b) BRD_SAFETYENABLE parameter renamed to BRD_SAFETY_DEFLT
|
||||||
|
c) Compass calibration auxiliary switch function (set RCx_OPTION=171)
|
||||||
|
d) Disable IMU3 auxiliary switch function (set RCx_OPTION=110)
|
||||||
|
e) Frame type sent to GCS defaults to multicopter to ease first time setup
|
||||||
|
f) Rangefinder and FS_OPTIONS param conversion code reduced (affects when upgrading from 3.6 or earlier)
|
||||||
|
g) MAVFTP supports file renaming
|
||||||
|
h) MAVLink in-progress reply to some requests for calibration from GCS
|
||||||
|
13) Bug fixes:
|
||||||
|
a) ADSB telemetry and callsign fixes
|
||||||
|
b) Battery pct reported to GCS limited to 0% to 100% range
|
||||||
|
c) Bi-directional DShot fix on H7 boards after system time wrap (more complete fix than in 4.3.6)
|
||||||
|
d) DisplayPort OSD screen reliability improvement on heavily loaded OSDs especially F4 boards
|
||||||
|
e) DisplayPort OSD artificial horizon better matches actual horizon
|
||||||
|
f) EFI Serial MS bug fix to avoid possible infinite loop
|
||||||
|
g) EKF3 Replay fix when COMPASS_LEARN=3
|
||||||
|
h) ESC Telemetry external temp reporting fix
|
||||||
|
i) Fence upload works even if Auto mode is excluded from firmware
|
||||||
|
j) FMT messages logged even when Fence is exncluded from firmware (e.g. unselected when using custom build server)
|
||||||
|
k) Guided mode slow yaw fix
|
||||||
|
l) Hardfault avoided if user changes INS_LOG_BAT_CNT while batch sampling running
|
||||||
|
m) ICM20649 temp sensor tolerate increased to avoid unnecessary FIFO reset
|
||||||
|
n) IMU detection bug fix to avoid duplicates
|
||||||
|
o) IMU temp cal fix when using auxiliary IMU
|
||||||
|
p) Message Interval fix for restoring default rate https://github.com/ArduPilot/ardupilot/pull/21947
|
||||||
|
q) RADIO_STATUS messages slow-down feature never completely stops messages from being sent
|
||||||
|
r) SERVOx_TRIM value output momentarily if SERVOx_FUNCTION is changed from Disabled to RCPassThru, RCIN1, etc. Avoids momentary divide-by-zero
|
||||||
|
s) Scripting file system open fix
|
||||||
|
t) Scripting PWM source deletion crash fix
|
||||||
|
u) MAVFTP fix for low baudrates (4800 baud and lower)
|
||||||
|
v) ModalAI VOXL reset handling fix
|
||||||
|
w) MPU6500 IMU fast sampling rate to 4k (was 1K)
|
||||||
|
x) NMEA GPGGA output fixed for GPS quality, num sats and hdop
|
||||||
|
y) Position control reset avoided even with very uneven main loop rate due to high CPU load
|
||||||
|
z) SingleCopter and CoaxCopter fix to fin centering when using DShot
|
||||||
|
aa) SystemID mode fix to write PID log messages
|
||||||
|
ab) Terrain offset increased from 15m to 30m (see TERRAIN_OFS_MAX)to reduce chance of "clamping"
|
||||||
|
ac) Throttle notch FFT tuning param fix
|
||||||
|
ad) VTX protects against pitmode changes when not enabled or vehicle disarmed
|
||||||
|
14) Developer specific items
|
||||||
|
a) DroneCAN replaces UAVCAN
|
||||||
|
b) FlighAxis simulator rangefinder fixed
|
||||||
|
c) Simulator supports main loop timing jitter (see SIM_TIME_JITTER)
|
||||||
|
d) Simulink model and init scripts
|
||||||
|
e) SITL on hardware support (useful to demo servos moving in response to simulated flight)
|
||||||
|
f) SITL parameter definitions added (some, not all)
|
||||||
|
g) Webots 2023a simulator support
|
||||||
|
h) XPlane support for wider range of aircraft
|
||||||
|
------------------------------------------------------------------
|
||||||
Rover 4.3.0-beta11/beta12 27-Mar-2023
|
Rover 4.3.0-beta11/beta12 27-Mar-2023
|
||||||
Changes from 4.3.0-beta10
|
Changes from 4.3.0-beta10
|
||||||
1) Bi-directional DShot fix for possible motor stop approx 72min after startup
|
1) Bi-directional DShot fix for possible motor stop approx 72min after startup
|
||||||
|
Loading…
Reference in New Issue
Block a user