diff --git a/libraries/AP_Scripting/AP_Scripting.cpp b/libraries/AP_Scripting/AP_Scripting.cpp
index b283f9791a..f1cf7b5b48 100644
--- a/libraries/AP_Scripting/AP_Scripting.cpp
+++ b/libraries/AP_Scripting/AP_Scripting.cpp
@@ -160,6 +160,43 @@ const AP_Param::GroupInfo AP_Scripting::var_info[] = {
     // @RebootRequired: True
     // @User: Advanced
     AP_GROUPINFO("THD_PRIORITY", 14, AP_Scripting, _thd_priority, uint8_t(ThreadPriority::NORMAL)),
+
+#if AP_SCRIPTING_SERIALDEVICE_ENABLED
+    // @Param: SDEV_EN
+    // @DisplayName: Scripting serial device enable
+    // @Description: Enable scripting serial devices
+    // @Values: 0:Disabled, 1:Enabled
+    // @RebootRequired: True
+    // @User: Advanced
+    AP_GROUPINFO_FLAGS("SDEV_EN", 15,  AP_Scripting, _serialdevice.enable, 0, AP_PARAM_FLAG_ENABLE),
+
+    // @Param: SDEV1_PROTO
+    // @DisplayName: Serial protocol of scripting serial device
+    // @Description: Serial protocol of scripting serial device
+    // @CopyFieldsFrom: SERIAL1_PROTOCOL
+    // @RebootRequired: True
+    // @User: Advanced
+    AP_GROUPINFO("SDEV1_PROTO", 16,  AP_Scripting, _serialdevice.ports[0].state.protocol, -1),
+
+#if AP_SCRIPTING_SERIALDEVICE_NUM_PORTS > 1
+    // @Param: SDEV2_PROTO
+    // @DisplayName: Serial protocol of scripting serial device
+    // @Description: Serial protocol of scripting serial device
+    // @CopyFieldsFrom: SCR_SDEV1_PROTO
+    AP_GROUPINFO("SDEV2_PROTO", 17,  AP_Scripting, _serialdevice.ports[1].state.protocol, -1),
+#endif
+
+#if AP_SCRIPTING_SERIALDEVICE_NUM_PORTS > 2
+    // @Param: SDEV3_PROTO
+    // @DisplayName: Serial protocol of scripting serial device
+    // @Description: Serial protocol of scripting serial device
+    // @CopyFieldsFrom: SCR_SDEV1_PROTO
+    AP_GROUPINFO("SDEV3_PROTO", 18,  AP_Scripting, _serialdevice.ports[2].state.protocol, -1),
+#endif
+#endif // AP_SCRIPTING_SERIALDEVICE_ENABLED
+
+    // WARNING: additional parameters must be listed before SDEV_EN (but have an
+    // index after SDEV3_PROTO) so they are not disabled by it!
     
     AP_GROUPEND
 };
@@ -220,6 +257,16 @@ void AP_Scripting::init(void) {
     }
 }
 
+#if AP_SCRIPTING_SERIALDEVICE_ENABLED
+void AP_Scripting::init_serialdevice_ports(void) {
+    if (!_enable) {
+        return;
+    }
+
+    _serialdevice.init();
+}
+#endif
+
 #if HAL_GCS_ENABLED
 MAV_RESULT AP_Scripting::handle_command_int_packet(const mavlink_command_int_t &packet) {
     switch ((SCRIPTING_CMD)packet.param1) {
diff --git a/libraries/AP_Scripting/AP_Scripting.h b/libraries/AP_Scripting/AP_Scripting.h
index a2b22e45de..234917bbd5 100644
--- a/libraries/AP_Scripting/AP_Scripting.h
+++ b/libraries/AP_Scripting/AP_Scripting.h
@@ -39,6 +39,14 @@
 class SocketAPM;
 #endif
 
+#ifndef AP_SCRIPTING_SERIALDEVICE_ENABLED
+#define AP_SCRIPTING_SERIALDEVICE_ENABLED AP_SERIALMANAGER_REGISTER_ENABLED && (BOARD_FLASH_SIZE>1024)
+#endif
+
+#if AP_SCRIPTING_SERIALDEVICE_ENABLED
+#include "AP_Scripting_SerialDevice.h"
+#endif
+
 class AP_Scripting
 {
 public:
@@ -49,6 +57,10 @@ public:
 
     void init(void);
 
+#if AP_SCRIPTING_SERIALDEVICE_ENABLED
+    void init_serialdevice_ports(void);
+#endif
+
     void update();
 
     bool enabled(void) const { return _enable != 0; };
@@ -138,6 +150,10 @@ public:
     command_block_list *mavlink_command_block_list;
     HAL_Semaphore mavlink_command_block_list_sem;
 
+    #if AP_SCRIPTING_SERIALDEVICE_ENABLED
+        AP_Scripting_SerialDevice _serialdevice;
+    #endif
+
 private:
 
     void thread(void); // main script execution thread
diff --git a/libraries/AP_Scripting/AP_Scripting_SerialAccess.cpp b/libraries/AP_Scripting/AP_Scripting_SerialAccess.cpp
index 1fd0623c6a..f82ef3a127 100644
--- a/libraries/AP_Scripting/AP_Scripting_SerialAccess.cpp
+++ b/libraries/AP_Scripting/AP_Scripting_SerialAccess.cpp
@@ -1,15 +1,27 @@
 /*
-  generic object to allow a script to use a serial stream
+  generic object to allow a script to use a serial driver stream from both
+  driver and device perspectives
  */
 
 #include "AP_Scripting_config.h"
+#include "AP_Scripting.h"
 #include "AP_Scripting_SerialAccess.h"
 
 #if AP_SCRIPTING_ENABLED
 
+#if AP_SCRIPTING_SERIALDEVICE_ENABLED
+#define check_is_device_port() (is_device_port)
+#define ON_DEVICE_PORT(func, ...) (((AP_Scripting_SerialDevice::Port*)stream)->device_##func (__VA_ARGS__))
+#else
+#define check_is_device_port() (false)
+#define ON_DEVICE_PORT(...) (0) // not executed
+#endif
+
 void AP_Scripting_SerialAccess::begin(uint32_t baud)
 {
-    stream->begin(baud);
+    if (!check_is_device_port()) {
+        stream->begin(baud);
+    }
 }
 
 size_t AP_Scripting_SerialAccess::write(uint8_t c)
@@ -19,7 +31,10 @@ size_t AP_Scripting_SerialAccess::write(uint8_t c)
 
 size_t AP_Scripting_SerialAccess::write(const uint8_t *buffer, size_t size)
 {
-    return stream->write(buffer, size);
+    if (!check_is_device_port()) {
+        return stream->write(buffer, size);
+    }
+    return ON_DEVICE_PORT(write, buffer, size);
 }
 
 int16_t AP_Scripting_SerialAccess::read(void)
@@ -33,17 +48,25 @@ int16_t AP_Scripting_SerialAccess::read(void)
 
 ssize_t AP_Scripting_SerialAccess::read(uint8_t* buffer, uint16_t count)
 {
-    return stream->read(buffer, count);
+    if (!check_is_device_port()) {
+        return stream->read(buffer, count);
+    }
+    return ON_DEVICE_PORT(read, buffer, count);
 }
 
 uint32_t AP_Scripting_SerialAccess::available(void)
 {
-    return stream->available();
+    if (!check_is_device_port()) {
+        return stream->available();
+    }
+    return ON_DEVICE_PORT(available);
 }
 
 void AP_Scripting_SerialAccess::set_flow_control(enum AP_HAL::UARTDriver::flow_control fcs)
 {
-    stream->set_flow_control(fcs);
+    if (!check_is_device_port()) {
+        stream->set_flow_control(fcs);
+    }
 }
 
 #endif // AP_SCRIPTING_ENABLED
diff --git a/libraries/AP_Scripting/AP_Scripting_SerialAccess.h b/libraries/AP_Scripting/AP_Scripting_SerialAccess.h
index 4f364bcfb1..7231359c81 100644
--- a/libraries/AP_Scripting/AP_Scripting_SerialAccess.h
+++ b/libraries/AP_Scripting/AP_Scripting_SerialAccess.h
@@ -1,5 +1,8 @@
 #pragma once
 
+#include "AP_Scripting_config.h"
+#include "AP_Scripting.h"
+
 #include <AP_HAL/UARTDriver.h>
 
 class AP_Scripting_SerialAccess {
@@ -22,4 +25,9 @@ public:
     void set_flow_control(enum AP_HAL::UARTDriver::flow_control fcs);
 
     AP_HAL::UARTDriver *stream;
+#if AP_SCRIPTING_ENABLED
+#if AP_SCRIPTING_SERIALDEVICE_ENABLED
+    bool is_device_port;
+#endif
+#endif
 };
diff --git a/libraries/AP_Scripting/AP_Scripting_SerialDevice.cpp b/libraries/AP_Scripting/AP_Scripting_SerialDevice.cpp
new file mode 100644
index 0000000000..ba09c9c0a0
--- /dev/null
+++ b/libraries/AP_Scripting/AP_Scripting_SerialDevice.cpp
@@ -0,0 +1,142 @@
+/*
+  port for a script to access from a device perspective
+ */
+
+#include "AP_Scripting_config.h"
+#include "AP_Scripting.h"
+
+#if AP_SCRIPTING_ENABLED && AP_SCRIPTING_SERIALDEVICE_ENABLED
+
+#include <AP_Math/AP_Math.h>
+#include <AP_BoardConfig/AP_BoardConfig.h>
+
+#ifndef AP_SCRIPTING_SERIALDEVICE_MIN_TXSIZE
+#define AP_SCRIPTING_SERIALDEVICE_MIN_TXSIZE 2048
+#endif
+
+#ifndef AP_SCRIPTING_SERIALDEVICE_MIN_RXSIZE
+#define AP_SCRIPTING_SERIALDEVICE_MIN_RXSIZE 2048
+#endif
+
+/*
+  initialise scripting serial ports
+*/
+void AP_Scripting_SerialDevice::init(void)
+{
+    if (enable == 0) {
+        return;
+    }
+
+    for (uint8_t i=0; i<ARRAY_SIZE(ports); i++) {
+        auto &p = ports[i];
+        p.state.idx = AP_SERIALMANAGER_SCR_PORT_1 + i;
+        p.init();
+        AP::serialmanager().register_port(&p);
+    }
+}
+
+/*
+  initialise port
+ */
+void AP_Scripting_SerialDevice::Port::init(void)
+{
+    begin(1000000, 0, 0); // assume 1MBaud rate even though it's a bit meaningless
+}
+
+size_t AP_Scripting_SerialDevice::Port::device_write(const uint8_t *buffer, size_t size)
+{
+    WITH_SEMAPHORE(sem);
+    if (readbuffer) {
+        return readbuffer->write(buffer, size);
+    }
+    return 0;
+}
+
+ssize_t AP_Scripting_SerialDevice::Port::device_read(uint8_t *buffer, uint16_t count)
+{
+    WITH_SEMAPHORE(sem);
+    if (writebuffer) {
+        return writebuffer->read(buffer, count);
+    }
+    return 0;
+}
+
+uint32_t AP_Scripting_SerialDevice::Port::device_available(void)
+{
+    WITH_SEMAPHORE(sem);
+    if (writebuffer) {
+        return writebuffer->available();
+    }
+    return 0;
+}
+
+/*
+  available space in outgoing buffer
+ */
+uint32_t AP_Scripting_SerialDevice::Port::txspace(void)
+{
+    WITH_SEMAPHORE(sem);
+    return writebuffer != nullptr ? writebuffer->space() : 0;
+}
+
+void AP_Scripting_SerialDevice::Port::_begin(uint32_t b, uint16_t rxS, uint16_t txS)
+{
+    rxS = MAX(rxS, AP_SCRIPTING_SERIALDEVICE_MIN_RXSIZE);
+    txS = MAX(txS, AP_SCRIPTING_SERIALDEVICE_MIN_TXSIZE);
+    init_buffers(rxS, txS);
+}
+
+size_t AP_Scripting_SerialDevice::Port::_write(const uint8_t *buffer, size_t size)
+{
+    WITH_SEMAPHORE(sem);
+    return writebuffer != nullptr ? writebuffer->write(buffer, size) : 0;
+}
+
+ssize_t AP_Scripting_SerialDevice::Port::_read(uint8_t *buffer, uint16_t count)
+{
+    WITH_SEMAPHORE(sem);
+    return readbuffer != nullptr ? readbuffer->read(buffer, count) : -1;
+}
+
+uint32_t AP_Scripting_SerialDevice::Port::_available()
+{
+    WITH_SEMAPHORE(sem);
+    return readbuffer != nullptr ? readbuffer->available() : 0;
+}
+
+
+bool AP_Scripting_SerialDevice::Port::_discard_input()
+{
+    WITH_SEMAPHORE(sem);
+    if (readbuffer != nullptr) {
+        readbuffer->clear();
+    }
+    return true;
+}
+
+/*
+  initialise read/write buffers
+ */
+bool AP_Scripting_SerialDevice::Port::init_buffers(const uint32_t size_rx, const uint32_t size_tx)
+{
+    if (size_tx == last_size_tx &&
+        size_rx == last_size_rx) {
+        return true;
+    }
+    WITH_SEMAPHORE(sem);
+    if (readbuffer == nullptr) {
+        readbuffer = NEW_NOTHROW ByteBuffer(size_rx);
+    } else {
+        readbuffer->set_size_best(size_rx);
+    }
+    if (writebuffer == nullptr) {
+        writebuffer = NEW_NOTHROW ByteBuffer(size_tx);
+    } else {
+        writebuffer->set_size_best(size_tx);
+    }
+    last_size_rx = size_rx;
+    last_size_tx = size_tx;
+    return readbuffer != nullptr && writebuffer != nullptr;
+}
+
+#endif // AP_SCRIPTING_ENABLED && AP_SCRIPTING_SERIALDEVICE_ENABLED
diff --git a/libraries/AP_Scripting/AP_Scripting_SerialDevice.h b/libraries/AP_Scripting/AP_Scripting_SerialDevice.h
new file mode 100644
index 0000000000..d69b2e45b0
--- /dev/null
+++ b/libraries/AP_Scripting/AP_Scripting_SerialDevice.h
@@ -0,0 +1,61 @@
+#pragma once
+
+#include <AP_SerialManager/AP_SerialManager.h>
+
+#ifndef AP_SCRIPTING_SERIALDEVICE_NUM_PORTS
+#define AP_SCRIPTING_SERIALDEVICE_NUM_PORTS 3
+#endif
+
+class AP_Scripting;
+
+class AP_Scripting_SerialDevice
+{
+public:
+    /* Do not allow copies */
+    CLASS_NO_COPY(AP_Scripting_SerialDevice);
+
+    AP_Scripting_SerialDevice() {}
+
+    AP_Int8 enable;
+
+    void init(void);
+
+public:
+    class Port : public AP_SerialManager::RegisteredPort {
+    public:
+        friend class AP_Scripting_SerialDevice;
+        void init(void);
+
+        size_t device_write(const uint8_t *buffer, size_t size);
+        ssize_t device_read(uint8_t *buffer, uint16_t count);
+        uint32_t device_available(void);
+
+    private:
+        bool is_initialized() override {
+            return true;
+        }
+        bool tx_pending() override {
+            return false;
+        }
+
+        bool init_buffers(const uint32_t size_rx, const uint32_t size_tx);
+
+        uint32_t txspace() override;
+        void _begin(uint32_t b, uint16_t rxS, uint16_t txS) override;
+        size_t _write(const uint8_t *buffer, size_t size) override;
+        ssize_t _read(uint8_t *buffer, uint16_t count) override;
+        uint32_t _available() override;
+        void _end() override {}
+        void _flush() override {}
+        bool _discard_input() override;
+
+        ByteBuffer *readbuffer;
+        ByteBuffer *writebuffer;
+        uint32_t last_size_tx;
+        uint32_t last_size_rx;
+
+        HAL_Semaphore sem;
+    };
+
+    Port ports[AP_SCRIPTING_SERIALDEVICE_NUM_PORTS];
+};
diff --git a/libraries/AP_Scripting/docs/docs.lua b/libraries/AP_Scripting/docs/docs.lua
index 32cb256ebd..b1c73afce1 100644
--- a/libraries/AP_Scripting/docs/docs.lua
+++ b/libraries/AP_Scripting/docs/docs.lua
@@ -1233,7 +1233,7 @@ function AP_HAL__I2CDevice_ud:set_retries(retries) end
 ---@class (exact) AP_Scripting_SerialAccess_ud
 local AP_Scripting_SerialAccess_ud = {}
 
--- Start serial port with the given baud rate
+-- Start serial port with the given baud rate (no effect for device ports)
 ---@param baud_rate uint32_t_ud|integer|number
 function AP_Scripting_SerialAccess_ud:begin(baud_rate) end
 
@@ -1263,7 +1263,7 @@ function AP_Scripting_SerialAccess_ud:readstring(count) end
 ---@return uint32_t_ud
 function AP_Scripting_SerialAccess_ud:available() end
 
--- Set flow control option for serial port
+-- Set flow control option for serial port (no effect for device ports)
 ---@param flow_control_setting integer
 ---| '0' # disabled
 ---| '1' # enabled
@@ -2119,6 +2119,16 @@ serial = {}
 ---@return AP_Scripting_SerialAccess_ud|nil -- access object for that instance, or nil if not found
 function serial:find_serial(instance) end
 
+-- Returns a serial access object that allows a script to simulate a device
+-- attached via a specific protocol. The device protocol is configured by
+-- SCR_SDEVx_PROTO. Instance 0 is the first such protocol, instance 1 the
+-- second, and so on. If the requested instance is not found, or SCR_SDEV_EN is
+-- disabled, returns nil.
+---@param protocol integer -- protocol to access
+---@param instance integer -- 0-based index of the protocol instance to access
+---@return AP_Scripting_SerialAccess_ud|nil -- access object for that instance, or nil if not found
+function serial:find_simulated_device(protocol, instance) end
+
 
 -- desc
 rc = {}
diff --git a/libraries/AP_Scripting/generator/description/bindings.desc b/libraries/AP_Scripting/generator/description/bindings.desc
index d2be4819c1..1c2deb44d8 100644
--- a/libraries/AP_Scripting/generator/description/bindings.desc
+++ b/libraries/AP_Scripting/generator/description/bindings.desc
@@ -406,6 +406,7 @@ userdata AP_Scripting_SerialAccess method set_flow_control void AP_HAL::UARTDriv
 -- serial is not a real C++ type here, but its name never gets used in C++ as we only have manual methods
 singleton serial depends HAL_GCS_ENABLED
 singleton serial manual find_serial lua_serial_find_serial 1 1
+singleton serial manual find_simulated_device lua_serial_find_simulated_device 2 1 depends AP_SCRIPTING_SERIALDEVICE_ENABLED
 
 include AP_Baro/AP_Baro.h
 singleton AP_Baro depends (!defined(HAL_BUILD_AP_PERIPH) || defined(HAL_PERIPH_ENABLE_BARO))
diff --git a/libraries/AP_Scripting/lua_bindings.cpp b/libraries/AP_Scripting/lua_bindings.cpp
index d9645f1c8b..7b817821cd 100644
--- a/libraries/AP_Scripting/lua_bindings.cpp
+++ b/libraries/AP_Scripting/lua_bindings.cpp
@@ -737,12 +737,52 @@ int lua_serial_find_serial(lua_State *L) {
     }
 
     new_AP_Scripting_SerialAccess(L);
-    check_AP_Scripting_SerialAccess(L, -1)->stream = driver_stream;
+    AP_Scripting_SerialAccess *port = check_AP_Scripting_SerialAccess(L, -1);
+    port->stream = driver_stream;
+#if AP_SCRIPTING_SERIALDEVICE_ENABLED
+    port->is_device_port = false;
+#endif
 
     return 1;
 }
 #endif // HAL_GCS_ENABLED
 
+#if AP_SCRIPTING_SERIALDEVICE_ENABLED
+int lua_serial_find_simulated_device(lua_State *L) {
+    // Allow : and . access
+    const int arg_offset = (luaL_testudata(L, 1, "serial") != NULL) ? 1 : 0;
+
+    binding_argcheck(L, 2 + arg_offset);
+
+    const int8_t protocol = (int8_t)get_uint32(L, 1 + arg_offset, 0, 127);
+    uint32_t instance = get_uint16_t(L, 2 + arg_offset);
+
+    auto *scripting = AP::scripting();
+    AP_Scripting_SerialDevice::Port *device_stream = nullptr;
+
+    for (auto &port : scripting->_serialdevice.ports) {
+        if (port.state.protocol == protocol) {
+            if (instance-- == 0) {
+                device_stream = &port;
+                break;
+            }
+        }
+    }
+
+    if (!scripting->_serialdevice.enable || device_stream == nullptr) {
+        // serial devices as a whole are disabled, or port not found
+        return 0;
+    }
+
+    new_AP_Scripting_SerialAccess(L);
+    AP_Scripting_SerialAccess *port = check_AP_Scripting_SerialAccess(L, -1);
+    port->stream = device_stream;
+    port->is_device_port = true;
+
+    return 1;
+}
+#endif // AP_SCRIPTING_SERIALDEVICE_ENABLED
+
 int lua_serial_writestring(lua_State *L)
 {
     binding_argcheck(L, 2);
diff --git a/libraries/AP_Scripting/lua_bindings.h b/libraries/AP_Scripting/lua_bindings.h
index a18bc7bb25..53b5f4b5ae 100644
--- a/libraries/AP_Scripting/lua_bindings.h
+++ b/libraries/AP_Scripting/lua_bindings.h
@@ -11,6 +11,7 @@ int AP_HAL__I2CDevice_read_registers(lua_State *L);
 int lua_get_CAN_device(lua_State *L);
 int lua_get_CAN_device2(lua_State *L);
 int lua_serial_find_serial(lua_State *L);
+int lua_serial_find_simulated_device(lua_State *L);
 int lua_serial_writestring(lua_State *L);
 int lua_serial_readstring(lua_State *L);
 int lua_dirlist(lua_State *L);