From 794f7a969eae78bb5d47ae78148aece044ff42f9 Mon Sep 17 00:00:00 2001 From: Michael du Breuil Date: Tue, 14 Feb 2017 12:31:23 -0700 Subject: [PATCH] AP_Arming: Fix up ARMING_REQUIRE param documentation to try and be less confusing --- libraries/AP_Arming/AP_Arming.cpp | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/libraries/AP_Arming/AP_Arming.cpp b/libraries/AP_Arming/AP_Arming.cpp index 3e1e784ecc..cb8f299f74 100644 --- a/libraries/AP_Arming/AP_Arming.cpp +++ b/libraries/AP_Arming/AP_Arming.cpp @@ -34,7 +34,7 @@ const AP_Param::GroupInfo AP_Arming::var_info[] = { // @Param: REQUIRE // @DisplayName: Require Arming Motors - // @Description: Arming disabled until some requirements are met. If 0, there are no requirements (arm immediately). If 1, require rudder stick or GCS arming before arming motors and send THR_MIN PWM to throttle channel when disarmed. If 2, require rudder stick or GCS arming and send 0 PWM to throttle channel when disarmed. See the ARMING_CHECK_* parameters to see what checks are done before arming. Note, if setting this parameter to 0 a reboot is required to arm the plane. Also note, even with this parameter at 0, if ARMING_CHECK parameter is not also zero the plane may fail to arm throttle at boot due to a pre-arm check failure. This parameter is relevant for ArduPlane only. + // @Description: Arming disabled until some requirements are met. If 0, there are no requirements (arm immediately). If 1, require rudder stick or GCS arming before arming motors and sends the minimum throttle PWM value to the throttle channel when disarmed. If 2, require rudder stick or GCS arming and send 0 PWM to throttle channel when disarmed. See the ARMING_CHECK_* parameters to see what checks are done before arming. Note, if setting this parameter to 0 a reboot is required to arm the plane. Also note, even with this parameter at 0, if ARMING_CHECK parameter is not also zero the plane may fail to arm throttle at boot due to a pre-arm check failure. This parameter is relevant for ArduPlane only. // @Values: 0:Disabled,1:THR_MIN PWM when disarmed,2:0 PWM when disarmed // @User: Advanced AP_GROUPINFO_FLAGS_FRAME("REQUIRE", 0, AP_Arming, require, 1,