mirror of
https://github.com/ArduPilot/ardupilot
synced 2025-02-01 21:48:28 -04:00
AP_HAL: added support for more SRXL varients
based on work by Roman Seb <roman-29188@gmx.de>
This commit is contained in:
Andrew Tridgell
parent
65ce9821be
commit
5934a099a4
@ -15,81 +15,170 @@
|
||||
/*
|
||||
SRXL protocol decoder, tested against AR7700 SRXL port
|
||||
Andrew Tridgell, September 2016
|
||||
|
||||
Co author: Roman Kirchner, September 2016
|
||||
- 2016.10.23: SRXL variant V1 sucessfully (Testbench and Pixhawk/MissionPlanner) tested with RX-9-DR M-LINK (SW v1.26)
|
||||
*/
|
||||
|
||||
#include <stdio.h>
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <string.h>
|
||||
#include "srxl.h"
|
||||
|
||||
/*
|
||||
there are other SRXL varients, but we need some sample data before accepting them
|
||||
*/
|
||||
#define SRXL_MAX_CHANNELS 20
|
||||
#define SRXL_HEAD_MARKER 0xA5
|
||||
|
||||
#define SRXL_NUM_BYTES 18
|
||||
|
||||
static uint8_t buffer[SRXL_NUM_BYTES];
|
||||
static uint8_t buflen;
|
||||
static uint64_t last_data_us;
|
||||
static uint16_t channels[SRXL_MAX_CHANNELS];
|
||||
/* SRXL datastream characteristics for all variants */
|
||||
#define SRXL_MIN_FRAMESPACE_US 8000U /* Minumum space between srxl frames in us (applies to all variants) */
|
||||
#define SRXL_MAX_CHANNELS 20U /* Maximum number of channels from srxl datastream */
|
||||
|
||||
/* decode progress states */
|
||||
#define STATE_IDLE 0x00U /* do nothing */
|
||||
#define STATE_NEW 0x01U /* get header of frame + prepare for frame reception + begin new crc cycle */
|
||||
#define STATE_COLLECT 0x02U /* collect RC channel data from frame + concurrently calc crc over payload data + extract channel information */
|
||||
|
||||
|
||||
/* Variant specific SRXL datastream characteristics */
|
||||
/* Framelength in byte */
|
||||
#define SRXL_FRAMELEN_V1 27U /* Framelength with header in byte for: Mpx SRXLv1 or XBUS Mode B */
|
||||
#define SRXL_FRAMELEN_V2 35U /* Framelength with header in byte for: Mpx SRXLv2 */
|
||||
#define SRXL_FRAMELEN_V5 18U /* Framelength with header in byte for Spk AR7700 etc. */
|
||||
#define SRXL_FRAMELEN_MAX 35U /* maximum possible framelengh */
|
||||
|
||||
/* Headerbyte */
|
||||
#define SRXL_HEADER_V1 0xA1U /* Headerbyte for: Mpx SRXLv1 or XBUS Mode B */
|
||||
#define SRXL_HEADER_V2 0xA2U /* Headerbyte for: Mpx SRXLv2 */
|
||||
#define SRXL_HEADER_V5 0xA5U /* Headerbyte for: Spk AR7700 etc. */
|
||||
#define SRXL_HEADER_NOT_IMPL 0xFFU /* Headerbyte for non impemented srxl header*/
|
||||
|
||||
|
||||
|
||||
|
||||
static uint8_t buffer[SRXL_FRAMELEN_MAX]; /* buffer for raw srxl frame data in correct order --> buffer[0]=byte0 buffer[1]=byte1 */
|
||||
static uint8_t buflen; /* length in number of bytes of received srxl dataframe in buffer */
|
||||
static uint64_t last_data_us; /* timespan since last received data in us */
|
||||
static uint16_t channels[SRXL_MAX_CHANNELS]; /* buffer for extracted RC channel data as pulsewidth in microseconds */
|
||||
|
||||
static uint8_t frame_header = 0U; /* Frame header from SRXL datastream */
|
||||
static uint8_t frame_len_full = 0U; /* Length in number of bytes of full srxl datastream */
|
||||
static uint8_t decode_state = STATE_IDLE; /* Current state of SRXL frame decoding */
|
||||
static uint8_t decode_state_next = STATE_IDLE; /* State of frame decoding thatwill be applied when the next byte from dataframe drops in */
|
||||
static uint16_t crc_fmu = 0U; /* CRC calculated over payload from srxl datastream on this machine */
|
||||
static uint16_t crc_receiver = 0U; /* CRC extracted from srxl datastream */
|
||||
|
||||
|
||||
static uint16_t max_channels;
|
||||
|
||||
/*
|
||||
get SRXL crc16 for a set of bytes
|
||||
*/
|
||||
static uint16_t srxl_crc16(const uint8_t *bytes, uint8_t nbytes)
|
||||
{
|
||||
uint16_t crc = 0;
|
||||
while (nbytes--) {
|
||||
int i;
|
||||
crc ^= (uint16_t)(*bytes++) << 8;
|
||||
|
||||
for (i = 0; i < 8; i++) {
|
||||
|
||||
|
||||
/**
|
||||
* This function calculates the 16bit crc as used throughout the srxl protocol variants
|
||||
*
|
||||
* This function is intended to be called whenever a new byte shall be added to the crc.
|
||||
* Simply provide the old crc and the new data byte and the function return the new crc value.
|
||||
*
|
||||
* To start a new crc calculation for a new srxl frame, provide parameter crc=0 and the first byte of the frame.
|
||||
*
|
||||
* @param[in] crc - start value for crc
|
||||
* @param[in] new_byte - byte that shall be included in crc calculation
|
||||
* @return calculated crc
|
||||
*/
|
||||
static uint16_t srxl_crc16 (uint16_t crc, uint8_t new_byte)
|
||||
{
|
||||
uint8_t loop;
|
||||
crc = crc ^ (uint16_t)new_byte << 8;
|
||||
for(loop = 0; loop < 8; loop++) {
|
||||
crc = (crc & 0x8000) ? (crc << 1) ^ 0x1021 : (crc << 1);
|
||||
}
|
||||
}
|
||||
return crc;
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
decode a SRXL packet
|
||||
/**
|
||||
* Get RC channel information as microsecond pulsewidth representation from srxl version 1 and 2
|
||||
*
|
||||
* This function extracts RC channel information from srxl dataframe. The function expects the whole dataframe
|
||||
* in correct order in static array "buffer[SRXL_FRAMELEN_MAX]". After extracting all RC channel information, the data
|
||||
* is transferred to "values" array from parameter list. If the pixhawk does not support all channels from srxl datastream,
|
||||
* only supported number of channels will be refreshed.
|
||||
*
|
||||
* IMPORTANT SAFETY NOTICE: This function shall only be used after CRC has been successful.
|
||||
*
|
||||
* Structure of SRXL v1 dataframe --> 12 channels, 12 Bit per channel
|
||||
* Byte0: Header 0xA1
|
||||
* Byte1: Bits7-4:Empty Bits3-0:Channel1 MSB
|
||||
* Byte2: Bits7-0: Channel1 LSB
|
||||
* (....)
|
||||
* Byte23: Bits7-4:Empty Bits3-0:Channel12 MSB
|
||||
* Byte24: Bits7-0: Channel12 LSB
|
||||
* Byte25: CRC16 MSB
|
||||
* Byte26: CRC16 LSB
|
||||
*
|
||||
* Structure of SRXL v2 dataframe --> 16 channels, 12 Bit per channel
|
||||
* Byte0: Header 0xA2
|
||||
* Byte1: Bits7-4:Empty Bits3-0:Channel1 MSB
|
||||
* Byte2: Bits7-0: Channel1 LSB
|
||||
* (....)
|
||||
* Byte31: Bits7-4:Empty Bits3-0:Channel16 MSB
|
||||
* Byte32: Bits7-0: Channel16 LSB
|
||||
* Byte33: CRC16 MSB
|
||||
* Byte34: CRC16 LSB
|
||||
*
|
||||
* @param[in] max_values - maximum number of values supported by the pixhawk
|
||||
* @param[out] num_values - number of RC channels extracted from srxl frame
|
||||
* @param[out] values - array of RC channels with refreshed information as pulsewidth in microseconds Range: 800us - 2200us
|
||||
* @param[out] failsafe_state - true: RC-receiver is in failsafe state, false: RC-receiver is not in failsafe state
|
||||
* @return 0: success
|
||||
*/
|
||||
int srxl_decode(uint64_t timestamp_us, uint8_t byte, uint8_t *num_values, uint16_t *values, uint16_t max_values, bool *failsafe_state)
|
||||
static int srxl_channels_get_v1v2(uint16_t max_values, uint8_t *num_values, uint16_t *values, bool *failsafe_state)
|
||||
{
|
||||
if (timestamp_us - last_data_us > 5000U || buflen == SRXL_NUM_BYTES) {
|
||||
// we've seen a frame gap
|
||||
if (buflen != 0) {
|
||||
buflen = 0;
|
||||
}
|
||||
}
|
||||
last_data_us = timestamp_us;
|
||||
buffer[buflen++] = byte;
|
||||
uint8_t loop;
|
||||
uint32_t channel_raw_value;
|
||||
|
||||
switch (buffer[0]) {
|
||||
case SRXL_HEAD_MARKER:
|
||||
break;
|
||||
*num_values = (uint8_t)((frame_len_full - 3U)/2U);
|
||||
*failsafe_state = 0U; /* this protocol version does not support failsafe information */
|
||||
|
||||
default:
|
||||
// invalid packet, we don't support this format yet
|
||||
return 2;
|
||||
/* get data channel data from frame */
|
||||
for (loop=0U; loop < *num_values; loop++) {
|
||||
channel_raw_value = ((((uint32_t)buffer[loop*2U+1U])& 0x0000000FU) << 8U) | ((uint32_t)(buffer[loop*2U+2U])); /* get 12bit channel raw value from srxl datastream (mask out unused bits with 0x0000000F) */
|
||||
channels[loop] = (uint16_t)(((channel_raw_value * (uint32_t)1400U) >> 12U) + (uint32_t)800U); /* convert raw value to servo/esc signal pulsewidth in us */
|
||||
}
|
||||
|
||||
uint8_t expected_bytes = SRXL_NUM_BYTES;
|
||||
if (buflen < expected_bytes) {
|
||||
// more bytes pending
|
||||
return 1;
|
||||
/* provide channel data to FMU */
|
||||
if ( (uint16_t)*num_values > max_values) {
|
||||
*num_values = (uint8_t)max_values;
|
||||
}
|
||||
memcpy(values, channels, (*num_values)*2);
|
||||
|
||||
return 0; /* for srxl protocol version 1 and 2 it is not expected, that any error happen during decode process */
|
||||
}
|
||||
|
||||
uint16_t crc = srxl_crc16(buffer, buflen-2);
|
||||
uint64_t crc2 = buffer[buflen-1] | (buffer[buflen-2]<<8);
|
||||
if (crc != crc2) {
|
||||
// bad CRC
|
||||
return 4;
|
||||
}
|
||||
|
||||
/**
|
||||
* Get RC channel information as microsecond pulsewidth representation from srxl version 5
|
||||
*
|
||||
* This function extracts RC channel information from srxl dataframe. The function expects the whole dataframe
|
||||
* in correct order in static array "buffer[SRXL_FRAMELEN_MAX]". After extracting all RC channel information, the data
|
||||
* is transferred to "values" array from parameter list. If the pixhawk does not support all channels from srxl datastream,
|
||||
* only supported number of channels will be refreshed.
|
||||
*
|
||||
* IMPORTANT SAFETY NOTICE: This function shall only be used after CRC has been successful.
|
||||
*
|
||||
* Structure of SRXL v5 dataframe
|
||||
* Byte0: Header 0xA5
|
||||
* Byte1 - Byte16: Payload
|
||||
* Byte17: CRC16 MSB
|
||||
* Byte18: CRC16 LSB
|
||||
*
|
||||
* @param[in] max_values - maximum number of values supported by the pixhawk
|
||||
* @param[out] num_values - number of RC channels extracted from srxl frame
|
||||
* @param[out] values - array of RC channels with refreshed information as pulsewidth in microseconds Range: 800us - 2200us
|
||||
* @param[out] failsafe_state - true: RC-receiver is in failsafe state, false: RC-receiver is not in failsafe state
|
||||
* @return 0: success
|
||||
*/
|
||||
static int srxl_channels_get_v5(uint16_t max_values, uint8_t *num_values, uint16_t *values, bool *failsafe_state)
|
||||
{
|
||||
// up to 7 channel values per packet. Each channel value is 16
|
||||
// bits, with 11 bits of data and 4 bits of channel number. The
|
||||
// top bit indicates a special X-Plus channel
|
||||
@ -98,12 +187,10 @@ int srxl_decode(uint64_t timestamp_us, uint8_t byte, uint8_t *num_values, uint16
|
||||
uint16_t c = b >> 11; // channel number
|
||||
int32_t v = b & 0x7FF;
|
||||
if (b & 0x8000) {
|
||||
//printf("bad data 0x%04x\n", b);
|
||||
// bad data
|
||||
return 2;
|
||||
continue;
|
||||
}
|
||||
if (c == 12) {
|
||||
// special handling for channel 12, this contains the XPlus channels
|
||||
// special handling for channel 12
|
||||
// see http://www.deviationtx.com/forum/protocol-development/2088-18-channels-for-dsm2-dsmx?start=40
|
||||
//printf("c12: 0x%x %02x %02x\n", (unsigned)(b>>9), (unsigned)buffer[0], (unsigned)buffer[1]);
|
||||
v = (b & 0x1FF) << 2;
|
||||
@ -120,6 +207,10 @@ int srxl_decode(uint64_t timestamp_us, uint8_t byte, uint8_t *num_values, uint16
|
||||
v = 0;
|
||||
}
|
||||
|
||||
// if channel number if greater than 16 then it is a X-Plus
|
||||
// channel. We don't yet know how to decode those. There is some information here:
|
||||
// http://www.deviationtx.com/forum/protocol-development/2088-18-channels-for-dsm2-dsmx?start=40
|
||||
// but we really need some sample data to confirm
|
||||
if (c < SRXL_MAX_CHANNELS) {
|
||||
v = (((v - 0x400) * 500) / 876) + 1500;
|
||||
channels[c] = v;
|
||||
@ -142,17 +233,119 @@ int srxl_decode(uint64_t timestamp_us, uint8_t byte, uint8_t *num_values, uint16
|
||||
// transmitter is lost
|
||||
*failsafe_state = ((buffer[1] & 2) == 0);
|
||||
|
||||
#if 0
|
||||
for (uint8_t i=0; i<buflen; i++) {
|
||||
printf("%02x ", (unsigned)buffer[i]);
|
||||
}
|
||||
printf("\n");
|
||||
#endif
|
||||
|
||||
buflen = 0;
|
||||
|
||||
// success
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
||||
/**
|
||||
* Decode SRXL frames
|
||||
*
|
||||
*
|
||||
* Structure of all SRXL frames
|
||||
* Byte[0]: Header 0xA<VARIANT> --> Variant specific header. Variant is encoded in bits 3-0 of header byte.
|
||||
* Byte[1] - Byte[N-2]: SRXL variant specific payload
|
||||
* Byte[N-1] - Byte[N]: CRC16 over payload and header
|
||||
*
|
||||
* @param[in] timestamp_us - timestamp in microseconds
|
||||
* @param[in] received byte in microseconds
|
||||
* @param[out] num_values - number of RC channels extracted from srxl frame
|
||||
* @param[out] values - array of RC channels with refreshed information as pulsewidth in microseconds Range: 800us - 2200us
|
||||
* @param[in] maximum number of values supported by pixhawk
|
||||
* @param[out] failsafe_state - true: RC-receiver is in failsafe state, false: RC-receiver is not in failsafe state
|
||||
* @return 0: success
|
||||
*/
|
||||
int srxl_decode(uint64_t timestamp_us, uint8_t byte, uint8_t *num_values, uint16_t *values, uint16_t max_values, bool *failsafe_state)
|
||||
{
|
||||
int ret = 1;
|
||||
|
||||
/*----------------------------------------distinguish different srxl variants at the beginning of each frame---------------------------------------------- */
|
||||
/* Check if we have a new begin of a frame --> indicators: Time gap in datastream + SRXL header 0xA<VARIANT>*/
|
||||
if ( (timestamp_us - last_data_us) >= SRXL_MIN_FRAMESPACE_US) {
|
||||
/* Now detect SRXL variant based on header */
|
||||
switch(byte) {
|
||||
case SRXL_HEADER_V1:
|
||||
frame_len_full = SRXL_FRAMELEN_V1;
|
||||
frame_header = SRXL_HEADER_V1;
|
||||
decode_state = STATE_NEW;
|
||||
break;
|
||||
case SRXL_HEADER_V2:
|
||||
frame_len_full = SRXL_FRAMELEN_V2;
|
||||
frame_header = SRXL_HEADER_V2;
|
||||
decode_state = STATE_NEW;
|
||||
break;
|
||||
case SRXL_HEADER_V5:
|
||||
frame_len_full = SRXL_FRAMELEN_V5;
|
||||
frame_header = SRXL_HEADER_V5;
|
||||
decode_state = STATE_NEW;
|
||||
break;
|
||||
default:
|
||||
frame_len_full = 0U;
|
||||
frame_header = SRXL_HEADER_NOT_IMPL;
|
||||
decode_state = STATE_IDLE;
|
||||
ret = 2; /* protocol version not implemented --> no channel data --> unknown packet */
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/*--------------------------------------------collect all data from stream and decode-------------------------------------------------------*/
|
||||
switch (decode_state) {
|
||||
case STATE_NEW: /* buffer header byte and prepare for frame reception and decoding */
|
||||
buffer[0U]=byte;
|
||||
crc_fmu = srxl_crc16(0U,byte);
|
||||
buflen = 1U;
|
||||
decode_state_next = STATE_COLLECT;
|
||||
break;
|
||||
|
||||
case STATE_COLLECT: /* receive all bytes. After reception decode frame and provide rc channel information to FMU */
|
||||
buffer[buflen] = byte;
|
||||
buflen++;
|
||||
/* CRC not over last 2 frame bytes as these bytes inhabitate the crc */
|
||||
if (buflen <= (frame_len_full-2)) {
|
||||
crc_fmu = srxl_crc16(crc_fmu,byte);
|
||||
}
|
||||
if( buflen == frame_len_full ) {
|
||||
/* CRC check here */
|
||||
crc_receiver = ((uint16_t)buffer[buflen-2] << 8U) | ((uint16_t)buffer[buflen-1]);
|
||||
if (crc_receiver == crc_fmu) {
|
||||
/* at this point buffer contains all frame data and crc is valid --> extract channel info according to SRXL variant */
|
||||
switch (frame_header) {
|
||||
case SRXL_HEADER_V1:
|
||||
ret = srxl_channels_get_v1v2(max_values, num_values, values, failsafe_state);
|
||||
break;
|
||||
case SRXL_HEADER_V2:
|
||||
ret = srxl_channels_get_v1v2(max_values, num_values, values, failsafe_state);
|
||||
break;
|
||||
case SRXL_HEADER_V5:
|
||||
ret = srxl_channels_get_v5(max_values, num_values, values, failsafe_state);
|
||||
break;
|
||||
default:
|
||||
ret = 2; /* protocol version not implemented --> no channel data */
|
||||
break;
|
||||
}
|
||||
}
|
||||
else {
|
||||
ret = 4; /* CRC fail --> no channel data */
|
||||
}
|
||||
decode_state_next = STATE_IDLE; /* frame data buffering and decoding finished --> statemachine not in use until new header drops is */
|
||||
}
|
||||
else {
|
||||
/* frame not completely received --> frame data buffering still ongoing */
|
||||
decode_state_next = STATE_COLLECT;
|
||||
}
|
||||
break;
|
||||
|
||||
default:
|
||||
ret = 1; /* STATE_IDLE --> do nothing */
|
||||
break;
|
||||
} /* switch (decode_state) */
|
||||
|
||||
decode_state = decode_state_next;
|
||||
last_data_us = timestamp_us;
|
||||
return ret;
|
||||
}
|
||||
|
||||
|
||||
@ -218,7 +411,7 @@ int main(int argc, const char *argv[])
|
||||
tv.tv_usec = 0;
|
||||
|
||||
// check if any bytes are available
|
||||
if (select(fd+1, &fds, nullptr, nullptr, &tv) != 1) {
|
||||
if (select(fd+1, &fds, NULL, NULL, &tv) != 1) {
|
||||
break;
|
||||
}
|
||||
|
||||
@ -240,7 +433,7 @@ int main(int argc, const char *argv[])
|
||||
#endif
|
||||
|
||||
|
||||
#ifdef TEST_HEX_PROGRAM
|
||||
#ifdef TEST_BIN_PROGRAM
|
||||
/*
|
||||
test harness for use under Linux with hex dump in a file
|
||||
*/
|
||||
@ -267,25 +460,43 @@ int main(int argc, const char *argv[])
|
||||
uint16_t values[20];
|
||||
bool failsafe_state;
|
||||
|
||||
unsigned u[18];
|
||||
if (fscanf(f, "%02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x",
|
||||
&u[0], &u[1], &u[2], &u[3], &u[4], &u[5], &u[6], &u[7], &u[8], &u[9],
|
||||
&u[10], &u[11], &u[12], &u[13], &u[14], &u[15], &u[16], &u[17]) != 18) {
|
||||
|
||||
uint8_t header;
|
||||
if (fread(&header, 1, 1, f) != 1) {
|
||||
break;
|
||||
}
|
||||
|
||||
uint8_t frame_size = 0;
|
||||
switch (header) {
|
||||
case SRXL_HEADER_V1:
|
||||
frame_size = SRXL_FRAMELEN_V1;
|
||||
break;
|
||||
case SRXL_HEADER_V2:
|
||||
frame_size = SRXL_FRAMELEN_V2;
|
||||
break;
|
||||
case SRXL_HEADER_V5:
|
||||
frame_size = SRXL_FRAMELEN_V5;
|
||||
break;
|
||||
}
|
||||
if (frame_size == 0) {
|
||||
continue;
|
||||
}
|
||||
uint8_t u[frame_size];
|
||||
u[0] = header;
|
||||
if (fread(&u[1], 1, sizeof(u)-1, f) != sizeof(u)-1) {
|
||||
break;
|
||||
}
|
||||
t += 11000;
|
||||
|
||||
for (uint8_t i=0; i<18; i++) {
|
||||
for (uint8_t i=0; i<sizeof(u); i++) {
|
||||
b = u[i];
|
||||
|
||||
if (srxl_decode(t, b, &num_values, values, sizeof(values)/sizeof(values[0]), &failsafe_state) == 0) {
|
||||
#if 1
|
||||
printf("%u: ", num_values);
|
||||
for (uint8_t i=0; i<num_values; i++) {
|
||||
printf("%u:%4u ", i+1, values[i]);
|
||||
}
|
||||
printf("%s\n", failsafe_state?"FAIL":"OK");
|
||||
#endif
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
Loading…
Reference in New Issue
Block a user