mirror of https://github.com/ArduPilot/ardupilot
AP_AdvancedFailsafe: removed some old AVR code
This commit is contained in:
Andrew Tridgell
parent
2c1be910d8
commit
570470ac59
|
|
@ -1,290 +0,0 @@
|
|||
/*
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
/*
|
||||
OBC failsafe board
|
||||
|
||||
Jack Pittar and Andrew Tridgell
|
||||
|
||||
*/
|
||||
|
||||
#define MODE_PWM_PIN 9 //Command pulse read on input 11
|
||||
#define MUXA_PIN 3 // H H rc , L H micro
|
||||
#define MUXB_PIN 4 // H L backup, L L prime
|
||||
#define LED_PIN 13
|
||||
#define OBC_MODE_PIN 12 //high for OBC termination settings
|
||||
#define AILERON_PIN 5
|
||||
#define ELEVATOR_PIN 6
|
||||
#define THROTTLE_PIN 7
|
||||
#define RUDDER_PIN 8
|
||||
|
||||
#define HEARTBEAT_PRIMARY_PIN 11
|
||||
#define TERMINATE_PRIMARY_PIN 10
|
||||
|
||||
#define HEARTBEAT_BACKUP_PIN A1
|
||||
#define TERMINATE_BACKUP_PIN A0
|
||||
|
||||
// set to 1 if backup autopilot is installed
|
||||
#define BACKUP_AUTOPILOT_INSTALLED 0
|
||||
|
||||
enum mux_mode {
|
||||
MUX_MODE_RC = 1,
|
||||
MUX_MODE_MICRO = 2,
|
||||
MUX_MODE_BACKUP = 3,
|
||||
MUX_MODE_PRIMARY = 4
|
||||
};
|
||||
|
||||
// heartbeat status
|
||||
static bool heartbeat_primary_ok = true;
|
||||
static bool heartbeat_backup_ok = true;
|
||||
|
||||
|
||||
|
||||
// check heartbeat status
|
||||
static void update_heartbeat(void)
|
||||
{
|
||||
static uint8_t last_hb_primary;
|
||||
static uint8_t last_hb_backup;
|
||||
static uint32_t last_primary_t;
|
||||
static uint32_t last_backup_t;
|
||||
uint8_t hb_primary = digitalRead(HEARTBEAT_PRIMARY_PIN);
|
||||
uint8_t hb_backup = digitalRead(HEARTBEAT_BACKUP_PIN);
|
||||
uint32_t tnow = millis();
|
||||
// Serial.println(hb_primary);
|
||||
// we consider the heartbeat to be OK if it changed in the
|
||||
// last 0.4 seconds
|
||||
const uint32_t hb_check_time = 400;
|
||||
if (hb_primary != last_hb_primary) {
|
||||
last_hb_primary = hb_primary;
|
||||
last_primary_t = tnow;
|
||||
//Serial.println("hb1 change");
|
||||
}
|
||||
if (hb_backup != last_hb_backup) {
|
||||
last_hb_backup = hb_backup;
|
||||
last_backup_t = tnow;
|
||||
//Serial.println("hb2 change");
|
||||
}
|
||||
if (tnow < hb_check_time) {
|
||||
// not enough time has passed for a measurement
|
||||
return;
|
||||
}
|
||||
heartbeat_primary_ok = ((tnow - last_primary_t) < hb_check_time);
|
||||
heartbeat_backup_ok = ((tnow - last_backup_t) < hb_check_time);
|
||||
}
|
||||
|
||||
|
||||
static void set_mux_mode(uint8_t mode)
|
||||
{
|
||||
switch ((enum mux_mode)mode) {
|
||||
case MUX_MODE_RC:
|
||||
digitalWrite(MUXA_PIN, HIGH);
|
||||
digitalWrite(MUXB_PIN, HIGH);
|
||||
break;
|
||||
case MUX_MODE_MICRO:
|
||||
digitalWrite(MUXA_PIN, LOW);
|
||||
digitalWrite(MUXB_PIN, HIGH);
|
||||
break;
|
||||
case MUX_MODE_BACKUP:
|
||||
digitalWrite(MUXA_PIN, HIGH);
|
||||
digitalWrite(MUXB_PIN, LOW);
|
||||
break;
|
||||
case MUX_MODE_PRIMARY:
|
||||
digitalWrite(MUXA_PIN, LOW);
|
||||
digitalWrite(MUXB_PIN, LOW);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
// send pulses to servos
|
||||
static void set_servos(uint16_t aileron, uint16_t elevator,
|
||||
uint16_t throttle, uint16_t rudder)
|
||||
{
|
||||
digitalWrite(AILERON_PIN, HIGH);
|
||||
delayMicroseconds(aileron);
|
||||
digitalWrite(AILERON_PIN, LOW);
|
||||
|
||||
digitalWrite(ELEVATOR_PIN, HIGH);
|
||||
delayMicroseconds(elevator);
|
||||
digitalWrite(ELEVATOR_PIN, LOW);
|
||||
|
||||
digitalWrite(THROTTLE_PIN, HIGH);
|
||||
delayMicroseconds(throttle);
|
||||
digitalWrite(THROTTLE_PIN, LOW);
|
||||
|
||||
digitalWrite(RUDDER_PIN, HIGH);
|
||||
delayMicroseconds(rudder);
|
||||
digitalWrite(RUDDER_PIN, LOW);
|
||||
}
|
||||
|
||||
static void set_servos_terminate(uint8_t obc_mode)
|
||||
{
|
||||
set_mux_mode(MUX_MODE_MICRO);
|
||||
if (obc_mode) {
|
||||
set_servos(1000, 2000, 1000, 1000);
|
||||
} else {
|
||||
set_servos(1500, 1500, 1200, 1500);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
void setup()
|
||||
{
|
||||
// input pins
|
||||
pinMode(HEARTBEAT_PRIMARY_PIN, INPUT);
|
||||
pinMode(TERMINATE_PRIMARY_PIN, INPUT);
|
||||
pinMode(HEARTBEAT_BACKUP_PIN, INPUT);
|
||||
pinMode(TERMINATE_BACKUP_PIN, INPUT);
|
||||
pinMode(MODE_PWM_PIN, INPUT);
|
||||
pinMode(OBC_MODE_PIN, INPUT);
|
||||
|
||||
// output pins
|
||||
pinMode(LED_PIN, OUTPUT);
|
||||
pinMode(MUXA_PIN, OUTPUT);
|
||||
pinMode(MUXB_PIN, OUTPUT);
|
||||
pinMode(AILERON_PIN, OUTPUT);
|
||||
pinMode(ELEVATOR_PIN, OUTPUT);
|
||||
pinMode(THROTTLE_PIN, OUTPUT);
|
||||
pinMode(RUDDER_PIN, OUTPUT);
|
||||
|
||||
digitalWrite(LED_PIN, LOW);
|
||||
set_mux_mode(MUX_MODE_MICRO);
|
||||
|
||||
Serial.begin(115200);
|
||||
Serial.println("OBC Failsafe Starting\n");
|
||||
}
|
||||
|
||||
void loop()
|
||||
{
|
||||
static uint32_t last_status_t;
|
||||
uint32_t tnow = millis();
|
||||
static uint8_t led_state;
|
||||
static bool has_terminated = false;
|
||||
static uint8_t termination_counter;
|
||||
static uint16_t loop_counter;
|
||||
|
||||
loop_counter++;
|
||||
|
||||
// check for heartbeat
|
||||
update_heartbeat();
|
||||
|
||||
// see if we are in manual mode. Note that on the Uno,
|
||||
// pulseIn is not very accurate. The +90 brings us much closer
|
||||
// to the real pulse width
|
||||
uint16_t mode_pwm = pulseIn(MODE_PWM_PIN, HIGH, 25000) + 90;
|
||||
uint16_t manual_mode = (mode_pwm > 1750 && mode_pwm < 2100);
|
||||
|
||||
// check the state of the terminate pins
|
||||
uint8_t terminate_primary = digitalRead(TERMINATE_PRIMARY_PIN);
|
||||
uint8_t terminate_backup = digitalRead(TERMINATE_BACKUP_PIN);
|
||||
|
||||
// see if the OBC mode jumper is set
|
||||
uint8_t obc_mode = digitalRead(OBC_MODE_PIN);
|
||||
|
||||
if (tnow - last_status_t > 1000) {
|
||||
last_status_t = tnow;
|
||||
// show status once a second
|
||||
Serial.print("OBC:"); Serial.print(obc_mode);
|
||||
Serial.print(" Mode:"); Serial.print(mode_pwm);
|
||||
Serial.print(" HB1:"); Serial.print(heartbeat_primary_ok);
|
||||
Serial.print(" HB2:"); Serial.print(heartbeat_backup_ok);
|
||||
Serial.print(" TERM1:"); Serial.print(terminate_primary);
|
||||
Serial.print(" TERM2:"); Serial.print(terminate_backup);
|
||||
Serial.print(" TERMINATED:"); Serial.print(has_terminated);
|
||||
Serial.print(" LOOP:"); Serial.print(loop_counter);
|
||||
Serial.println();
|
||||
delayMicroseconds(5000);
|
||||
loop_counter = 0;
|
||||
// flash LED once a second so we know failsafe board
|
||||
// is working
|
||||
led_state = !led_state;
|
||||
digitalWrite(LED_PIN, led_state);
|
||||
}
|
||||
|
||||
// allow reset via serial connection
|
||||
if (Serial.available() > 0) {
|
||||
char c = (char)Serial.read();
|
||||
if (c == 'r') {
|
||||
Serial.println("RESET BOARD");
|
||||
has_terminated = false;
|
||||
termination_counter = 0;
|
||||
}
|
||||
}
|
||||
|
||||
// if we are not in OBC mode, and the mode control
|
||||
// channel is high, then give RC control
|
||||
if (!obc_mode && manual_mode) {
|
||||
// give manual control via RC
|
||||
set_mux_mode(MUX_MODE_RC);
|
||||
return;
|
||||
}
|
||||
|
||||
#if BACKUP_AUTOPILOT_INSTALLED == 0
|
||||
terminate_backup = false;
|
||||
#endif
|
||||
|
||||
// see if termination is set by a functioning autopilot
|
||||
if (heartbeat_primary_ok && terminate_primary) {
|
||||
termination_counter++;
|
||||
} else if (heartbeat_backup_ok && terminate_backup) {
|
||||
termination_counter++;
|
||||
} else if (obc_mode && !heartbeat_primary_ok && !heartbeat_backup_ok) {
|
||||
// if in OBC mode and neither autopilot is OK, then
|
||||
// terminate
|
||||
termination_counter++;
|
||||
} else {
|
||||
termination_counter = 0;
|
||||
}
|
||||
|
||||
// use the termination counter to debounce the termination
|
||||
// pins
|
||||
if (termination_counter > 10) {
|
||||
termination_counter = 0;
|
||||
has_terminated = true;
|
||||
}
|
||||
|
||||
// if we have terminated then setup the servos
|
||||
if (has_terminated) {
|
||||
set_servos_terminate(obc_mode);
|
||||
return;
|
||||
}
|
||||
|
||||
bool heartbeat_ok = heartbeat_primary_ok;
|
||||
#if BACKUP_AUTOPILOT_INSTALLED
|
||||
if (heartbeat_backup_ok) {
|
||||
heartbeat_ok = true;
|
||||
}
|
||||
#endif
|
||||
|
||||
if (heartbeat_ok) {
|
||||
// at least one autopilot is healthy
|
||||
if (manual_mode) {
|
||||
// we want manual/RC control
|
||||
set_mux_mode(MUX_MODE_RC);
|
||||
} else if (heartbeat_primary_ok) {
|
||||
set_mux_mode(MUX_MODE_PRIMARY);
|
||||
} else {
|
||||
set_mux_mode(MUX_MODE_BACKUP);
|
||||
}
|
||||
} else {
|
||||
// neither autopilot is OK
|
||||
if (obc_mode) {
|
||||
set_servos_terminate(obc_mode);
|
||||
} else {
|
||||
// give RC control
|
||||
set_mux_mode(MUX_MODE_RC);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
|
|
@ -1,6 +0,0 @@
|
|||
#
|
||||
# Trivial makefile for building APM
|
||||
#
|
||||
BOARD=uno
|
||||
include ../../../libraries/../mk/apm.mk
|
||||
|
||||
Loading…
Reference in New Issue