Mirror/ardupilot
5
0
Fork 0
mirror of https://github.com/ArduPilot/ardupilot synced 2025-01-11 02:18:29 -04:00
Code Issues Packages Projects Releases Wiki Activity

AP_InertialSensor: always allow for AK8963 on MPU9250

Browse Source
This commit is contained in:
Andrew Tridgell 2015-03-13 16:30:26 +11:00
parent d040318014
commit 520c7c1306
1 changed files with 0 additions and 12 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
libraries/AP_InertialSensor/AP_InertialSensor_MPU9250.cpp
View File

@ -421,11 +421,6 @@ bool AP_InertialSensor_MPU9250::_hardware_init(void)
// Chip reset
uint8_t tries;
for (tries = 0; tries<5; tries++) {
#if HAL_COMPASS_DEFAULT != HAL_COMPASS_AK8963_MPU9250
/* Prevent reseting if internal AK8963 is selected, because it may corrupt
* AK8963's initialisation. */
_register_write(MPUREG_PWR_MGMT_1, BIT_PWR_MGMT_1_DEVICE_RESET);
#endif
hal.scheduler->delay(100);
// Wake up device and select GyroZ clock. Note that the
@ -450,13 +445,6 @@ bool AP_InertialSensor_MPU9250::_hardware_init(void)
_register_write(MPUREG_PWR_MGMT_2, 0x00); // only used for wake-up in accelerometer only low power mode
// Disable I2C bus (recommended on datasheet)
#if HAL_COMPASS_DEFAULT != HAL_COMPASS_AK8963_MPU9250
/* Prevent disabling if internal AK8963 is selected. If internal AK8963 is not used
* it's ok to disable I2C slaves*/
_register_write(MPUREG_USER_CTRL, BIT_USER_CTRL_I2C_IF_DIS);
#endif
// used no filter of 256Hz on the sensor, then filter using
// the 2-pole software filter
_register_write(MPUREG_CONFIG, BITS_DLPF_CFG_256HZ_NOLPF2);