Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

AP_InertialSensor: apply stuck gyro fix to all IxM42xxx sensors 

TDK has confirmed this applies to all IxM42xxx sensors
This commit is contained in:
Andrew Tridgell 2023-10-26 10:10:50 +11:00
parent 8b4bc0e077
commit 483d19f44c
1 changed files with 29 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

36
libraries/AP_InertialSensor/AP_InertialSensor_Invensensev3.cpp
View File

@ -127,8 +127,8 @@ extern const AP_HAL::HAL& hal;
#define INV3BANK_456_IPREG_SYS1_ADDR 0xA400 #define INV3BANK_456_IPREG_SYS1_ADDR 0xA400
#define INV3BANK_456_IPREG_SYS2_ADDR 0xA500 #define INV3BANK_456_IPREG_SYS2_ADDR 0xA500
// ICM42688 specific registers // ICM42xxx specific registers
#define INV3REG_42688_INTF_CONFIG1 0x4d #define INV3REG_42XXX_INTF_CONFIG1 0x4d
// WHOAMI values // WHOAMI values
#define INV3_ID_ICM40605 0x33 #define INV3_ID_ICM40605 0x33
@ -802,6 +802,28 @@ void AP_InertialSensor_Invensensev3::set_filter_and_scaling(void)
register_write_bank(2, INV3REG_ACCEL_CONFIG_STATIC3, (accel_aaf_deltsqr & 0xFF)); // ACCEL_AAF_DELTSQR register_write_bank(2, INV3REG_ACCEL_CONFIG_STATIC3, (accel_aaf_deltsqr & 0xFF)); // ACCEL_AAF_DELTSQR
register_write_bank(2, INV3REG_ACCEL_CONFIG_STATIC4, ((accel_aaf_bitshift<<4) & 0xF0) | ((accel_aaf_deltsqr>>8) & 0x0F)); // ACCEL_AAF_BITSHIFT | ACCEL_AAF_DELTSQR register_write_bank(2, INV3REG_ACCEL_CONFIG_STATIC4, ((accel_aaf_bitshift<<4) & 0xF0) | ((accel_aaf_deltsqr>>8) & 0x0F)); // ACCEL_AAF_BITSHIFT | ACCEL_AAF_DELTSQR
switch (inv3_type) {
case Invensensev3_Type::ICM42688:
case Invensensev3_Type::ICM42605:
case Invensensev3_Type::IIM42652:
case Invensensev3_Type::ICM42670: {
/*
fix for the "stuck gyro" issue, which affects all IxM42xxx
sensors. This disables the AFSR feature which changes the
noise sensitivity with angular rate. When the switch happens
(at around 100 deg/sec) the gyro gets stuck for around 2ms,
producing constant output which causes a DC gyro bias
*/
const uint8_t v = register_read(INV3REG_42XXX_INTF_CONFIG1);
register_write(INV3REG_42XXX_INTF_CONFIG1, (v & 0x3F) | 0x40, true);
break;
}
case Invensensev3_Type::ICM40605:
case Invensensev3_Type::ICM40609:
case Invensensev3_Type::ICM45686:
break;
}
// enable gyro and accel in low-noise modes // enable gyro and accel in low-noise modes
register_write(INV3REG_PWR_MGMT0, 0x0F); register_write(INV3REG_PWR_MGMT0, 0x0F);
hal.scheduler->delay_microseconds(300); hal.scheduler->delay_microseconds(300);
@ -826,6 +848,10 @@ void AP_InertialSensor_Invensensev3::set_filter_and_scaling_icm42670(void)
register_write(INV3REG_70_ACCEL_CONFIG0, 0x05); register_write(INV3REG_70_ACCEL_CONFIG0, 0x05);
// AAF is not available for accels, so LPF at 180Hz // AAF is not available for accels, so LPF at 180Hz
register_write(INV3REG_70_ACCEL_CONFIG1, 0x01); register_write(INV3REG_70_ACCEL_CONFIG1, 0x01);
// fix "stuck" gyro issue
const uint8_t v = register_read(INV3REG_42XXX_INTF_CONFIG1);
register_write(INV3REG_42XXX_INTF_CONFIG1, (v & 0x3F) | 0x40);
} }
/* /*
@ -984,7 +1010,7 @@ bool AP_InertialSensor_Invensensev3::hardware_init(void)
{ {
WITH_SEMAPHORE(dev->get_semaphore()); WITH_SEMAPHORE(dev->get_semaphore());
dev->setup_checked_registers(7, dev->bus_type() == AP_HAL::Device::BUS_TYPE_I2C?200:20); dev->setup_checked_registers(8, dev->bus_type() == AP_HAL::Device::BUS_TYPE_I2C?200:20);
// initially run the bus at low speed // initially run the bus at low speed
dev->set_speed(AP_HAL::Device::SPEED_LOW); dev->set_speed(AP_HAL::Device::SPEED_LOW);
@ -1074,10 +1100,6 @@ bool AP_InertialSensor_Invensensev3::hardware_init(void)
// disable STC // disable STC
uint8_t reg = register_read_bank_icm456xy(INV3BANK_456_IPREG_TOP1_ADDR, 0x68); // I3C_STC_MODE b2 uint8_t reg = register_read_bank_icm456xy(INV3BANK_456_IPREG_TOP1_ADDR, 0x68); // I3C_STC_MODE b2
register_write_bank_icm456xy(INV3BANK_456_IPREG_TOP1_ADDR, 0x68, reg & ~0x04); register_write_bank_icm456xy(INV3BANK_456_IPREG_TOP1_ADDR, 0x68, reg & ~0x04);
} else if (inv3_type == Invensensev3_Type::ICM42688) {
// fix for the "stuck gyro" issue
const uint8_t v = register_read(INV3REG_42688_INTF_CONFIG1);
register_write(INV3REG_42688_INTF_CONFIG1, (v & 0x3F) | 0x40);
} }
return true; return true;