mirror of https://github.com/ArduPilot/ardupilot
ArduPPM: Redundancy mode
Base algorithm added for channel count auto detection in the decoder himself. Replaced the #define for PPM_CHx_CHANNELS by PPM_CHx_MAX_CHANNELS. Channel count #define was not needed anymore thanks to the channel count auto detection. Channel detection post processing to do.
This commit is contained in:
Olivier ADLER
parent
2936dbb9de
commit
3784f326e8
|
|
@ -61,8 +61,8 @@ volatile uint8_t servo_input_mode = JUMPER_SELECT_MODE;
|
|||
// -------------------------------------------------------------
|
||||
|
||||
#define SWITCHOVER_CHANNEL_A 9 // Receiver 1 PPM channel to force receiver 2. Use 0 for no switchover channel
|
||||
// Must be selected from 6 to 16. Preferabily from 9 to 16 so that APM can use
|
||||
// channels 1 or 8.
|
||||
// Must be choosed between 6 to 16. Preferabily from 9 to 16 so that APM can use
|
||||
// channels 1 to 8.
|
||||
|
||||
|
||||
#define SWITCHOVER_1_to_2_DELAY_MS 50 // Delay for switching to receiver 2
|
||||
|
|
@ -90,15 +90,15 @@ volatile uint8_t servo_input_mode = JUMPER_SELECT_MODE;
|
|||
|
||||
#ifdef PPM_CH1_STANDARD_EXTENDED
|
||||
|
||||
// Number of input PPM channels
|
||||
#define PPM_CH1_CHANNELS 9
|
||||
// Max input PPM channels
|
||||
#define PPM_CH1_MAX_CHANNELS 9
|
||||
// Frame period
|
||||
#define PPM_CH1_FRAME_PERIOD 22100 // frame period (microseconds)
|
||||
|
||||
#else
|
||||
|
||||
// Number of input PPM channels
|
||||
#define PPM_CH1_CHANNELS 8
|
||||
// Max input PPM channels
|
||||
#define PPM_CH1_MAX_CHANNELS 8
|
||||
// Frame period
|
||||
#define PPM_CH1_FRAME_PERIOD 20000 // frame period (microseconds)
|
||||
|
||||
|
|
@ -117,15 +117,15 @@ volatile uint8_t servo_input_mode = JUMPER_SELECT_MODE;
|
|||
#define PPM_CH1_CHANNEL_PREPULSE_LENGHT 400
|
||||
|
||||
// PPM frame sync symbol minimum and maximum laps
|
||||
#define PPM_CH1_MIN_SYNC_LENGHT PPM_CH1_FRAME_PERIOD - ( PPM_CH1_CHANNELS * PPM_CH1_VAL_MAX ) // Sync symbol detection
|
||||
#define PPM_CH1_MAX_SYNC_LENGHT PPM_CH1_FRAME_PERIOD - ( PPM_CH1_CHANNELS * PPM_CH1_VAL_MIN ) // Sync timeout
|
||||
#define PPM_CH1_MIN_SYNC_LENGHT PPM_CH1_FRAME_PERIOD - ( PPM_CH1_MAX_CHANNELS * PPM_CH1_VAL_MAX ) // Sync symbol detection
|
||||
#define PPM_CH1_MAX_SYNC_LENGHT PPM_CH1_FRAME_PERIOD - ( PPM_CH1_MAX_CHANNELS * PPM_CH1_VAL_MIN ) // Sync timeout
|
||||
|
||||
#endif
|
||||
|
||||
#ifdef PPM_CH1_V2 (PPMv2 is a 50 Hz 16 channels mode, used initialy on Futaba and later on other manufacturers modules)
|
||||
|
||||
// Number of input PPM channels
|
||||
#define PPM_CH1_CHANNELS 16
|
||||
// Max input PPM channels
|
||||
#define PPM_CH1_MAX_CHANNELS 16
|
||||
// Frame period
|
||||
#define PPM_CH1_FRAME_PERIOD 20000 // frame period (microseconds)
|
||||
|
||||
|
|
@ -142,15 +142,15 @@ volatile uint8_t servo_input_mode = JUMPER_SELECT_MODE;
|
|||
#define PPM_CH1_CHANNEL_PREPULSE_LENGHT 200
|
||||
|
||||
// PPM frame sync symbol minimum and maximum laps
|
||||
#define PPM_CH1_MIN_SYNC_LENGHT PPM_CH1_FRAME_PERIOD - ( PPM_CH1_CHANNELS * PPM_CH1_VAL_MAX ) // Sync symbol detection
|
||||
#define PPM_CH1_MAX_SYNC_LENGHT PPM_CH1_FRAME_PERIOD - ( PPM_CH1_CHANNELS * PPM_CH1_VAL_MIN ) // Sync timeout
|
||||
#define PPM_CH1_MIN_SYNC_LENGHT PPM_CH1_FRAME_PERIOD - ( PPM_CH1_MAX_CHANNELS * PPM_CH1_VAL_MAX ) // Sync symbol detection
|
||||
#define PPM_CH1_MAX_SYNC_LENGHT PPM_CH1_FRAME_PERIOD - ( PPM_CH1_MAX_CHANNELS * PPM_CH1_VAL_MIN ) // Sync timeout
|
||||
|
||||
#endif
|
||||
|
||||
#ifdef PPM_CH1_V3 (PPMv3 is a 40 Hz slower refresh frequency 16 channels mode to allow 16 channels with older transmitter modules)
|
||||
|
||||
// Number of input PPM channels
|
||||
#define PPM_CH1_CHANNELS 16
|
||||
// Max input PPM channels
|
||||
#define PPM_CH1_MAX_CHANNELS 16
|
||||
// Frame period
|
||||
#define PPM_CH1_FRAME_PERIOD 25000 // frame period (microseconds)
|
||||
|
||||
|
|
@ -167,8 +167,8 @@ volatile uint8_t servo_input_mode = JUMPER_SELECT_MODE;
|
|||
#define PPM_CH1_CHANNEL_PREPULSE_LENGHT 400
|
||||
|
||||
// PPM frame sync symbol minimum and maximum laps
|
||||
#define PPM_CH1_MIN_SYNC_LENGHT PPM_CH1_FRAME_PERIOD - ( PPM_CH1_CHANNELS * PPM_CH1_VAL_MAX ) // Sync symbol detection
|
||||
#define PPM_CH1_MAX_SYNC_LENGHT PPM_CH1_FRAME_PERIOD - ( PPM_CH1_CHANNELS * PPM_CH1_VAL_MIN ) // Sync timeout
|
||||
#define PPM_CH1_MIN_SYNC_LENGHT PPM_CH1_FRAME_PERIOD - ( PPM_CH1_MAX_CHANNELS * PPM_CH1_VAL_MAX ) // Sync symbol detection
|
||||
#define PPM_CH1_MAX_SYNC_LENGHT PPM_CH1_FRAME_PERIOD - ( PPM_CH1_MAX_CHANNELS * PPM_CH1_VAL_MIN ) // Sync timeout
|
||||
|
||||
#endif
|
||||
|
||||
|
|
@ -178,14 +178,14 @@ volatile uint8_t servo_input_mode = JUMPER_SELECT_MODE;
|
|||
|
||||
#ifdef PPM_CH2_STANDARD_EXTENDED
|
||||
|
||||
// Number of input PPM channels
|
||||
// Max input PPM channels
|
||||
#define PPM_CH2_CHANNELS 9
|
||||
// Frame period
|
||||
#define PPM_CH2_FRAME_PERIOD 22100 // frame period (microseconds)
|
||||
|
||||
#else
|
||||
|
||||
// Number of input PPM channels
|
||||
// Max input PPM channels
|
||||
#define PPM_CH2_CHANNELS 8
|
||||
// Frame period
|
||||
#define PPM_CH2_FRAME_PERIOD 20000 // frame period (microseconds)
|
||||
|
|
@ -199,7 +199,6 @@ volatile uint8_t servo_input_mode = JUMPER_SELECT_MODE;
|
|||
#define PPM_CH2_VAL_MIN TICKS_FOR_ONE_US * 900
|
||||
#define PPM_CH2_VAL_MAX TICKS_FOR_ONE_US * 2100
|
||||
#define PPM_CH2_VAL_CENTER TICKS_FOR_ONE_US * 1500
|
||||
#define PPM_CH1_FORCE_VAL_MIN 1800
|
||||
|
||||
// PPM channel pre pulse lenght
|
||||
#define PPM_CH1_CHANNEL_PREPULSE_LENGHT 400
|
||||
|
|
@ -212,7 +211,7 @@ volatile uint8_t servo_input_mode = JUMPER_SELECT_MODE;
|
|||
|
||||
#ifdef PPM_CH2_V2 (PPMv2 is a 50 Hz 16 channels mode, used initialy on Futaba and later on other manufacturers modules)
|
||||
|
||||
// Number of input PPM channels
|
||||
// Max input PPM channels
|
||||
#define PPM_CH2_CHANNELS 16
|
||||
// Frame period
|
||||
#define PPM_CH2_FRAME_PERIOD 20000 // frame period (microseconds)
|
||||
|
|
@ -224,7 +223,6 @@ volatile uint8_t servo_input_mode = JUMPER_SELECT_MODE;
|
|||
#define PPM_CH2_VAL_MIN TICKS_FOR_ONE_US * 450
|
||||
#define PPM_CH2_VAL_MAX TICKS_FOR_ONE_US * 1050
|
||||
#define PPM_CH2_VAL_CENTER TICKS_FOR_ONE_US * 750
|
||||
#define PPM_CH1_FORCE_VAL_MIN 900
|
||||
|
||||
// PPM channel pre pulse lenght
|
||||
#define PPM_CH1_CHANNEL_PREPULSE_LENGHT 200
|
||||
|
|
@ -237,7 +235,7 @@ volatile uint8_t servo_input_mode = JUMPER_SELECT_MODE;
|
|||
|
||||
#ifdef PPM_CH2_V3 (PPMv3 is a 40 Hz slower refresh frequency 16 channels mode to allow 16 channels with older transmitter modules)
|
||||
|
||||
// Number of input PPM channels
|
||||
// Max input PPM channels
|
||||
#define PPM_CH2_CHANNELS 16
|
||||
// Frame period
|
||||
#define PPM_CH2_FRAME_PERIOD 25000 // frame period (microseconds)
|
||||
|
|
@ -249,7 +247,6 @@ volatile uint8_t servo_input_mode = JUMPER_SELECT_MODE;
|
|||
#define PPM_CH2_VAL_MIN TICKS_FOR_ONE_US * 750
|
||||
#define PPM_CH2_VAL_MAX TICKS_FOR_ONE_US * 1350
|
||||
#define PPM_CH2_VAL_CENTER TICKS_FOR_ONE_US * 1050
|
||||
#define PPM_CH1_FORCE_VAL_MIN 1260
|
||||
|
||||
// PPM channel pre pulse lenght
|
||||
#define PPM_CH1_CHANNEL_PREPULSE_LENGHT 400
|
||||
|
|
@ -637,6 +634,19 @@ ISR( SERVO_INT_VECTOR )
|
|||
// ch2 switchover flag
|
||||
static bool switchover_ch2 = false;
|
||||
|
||||
// Channel count detection ready flag
|
||||
static bool channel_count_ready_ch1 = false;
|
||||
static bool channel_count_ready_ch2 = false;
|
||||
|
||||
// Channel count detected flag
|
||||
static bool channel_count_detected_ch1 = false;
|
||||
static bool channel_count_detected_ch2 = false;
|
||||
|
||||
// Detected Channel count
|
||||
static uint8_t channel_count_ch1 = PPM_CH1_MAX_CHANNELS;
|
||||
static uint8_t channel_count_ch2 = PPM_CH2_MAX_CHANNELS;
|
||||
|
||||
|
||||
// -----------------------------------
|
||||
// PPM redundancy - decoder
|
||||
// -----------------------------------
|
||||
|
|
@ -666,13 +676,33 @@ CHECK_LOOP: // Input PPM pins check loop
|
|||
{
|
||||
if(sync_ch1 == true) // Are we synchronized ?
|
||||
{
|
||||
//We could add a test here for channel pre pulse lenght check
|
||||
// Ckeck for sync symbol
|
||||
if( ppm1_width[ ppm1_channel ] > PPM_CH1_MIN_SYNC_LENGHT ) || ( ppm1_width[ ppm1_channel ] < PPM_CH1_MAX_SYNC_LENGHT )
|
||||
{
|
||||
// Ckeck for channel count detected flag
|
||||
if( channel_count_detected_ch1 == false ) // We do not have channel count detected yet
|
||||
{
|
||||
channel_count_ch1 = ppm1_channel; // Store PPM1 channel count
|
||||
channel_count_ready_ch1 = true; // Set PPM1 channel count detection ready flag
|
||||
}
|
||||
else // Channel count has been detected
|
||||
{
|
||||
//We should not have a sync symbol here
|
||||
sync_error_ch1 = true; // Set sync error flag
|
||||
ppm1_channel = 0; // Reset PPM channel counter
|
||||
}
|
||||
}
|
||||
else // We have a new channel start (after channel 1)
|
||||
{
|
||||
//Todo: We could add a test here for channel pre pulse lenght check
|
||||
|
||||
// Update channel counter
|
||||
ppm1_channel++;
|
||||
}
|
||||
|
||||
// We have a new channel start, update channel counter
|
||||
ppm1_channel++;
|
||||
}
|
||||
// If not yet synchronized check for sync symbol end
|
||||
else if( ppm1_width > PPM_CH1_MIN_SYNC_LENGHT ) || ( ppm1_width < PPM_CH1_MAX_SYNC_LENGHT )
|
||||
// If not yet synchronized check for sync symbol
|
||||
else if( ppm1_width[ ppm1_channel ] > PPM_CH1_MIN_SYNC_LENGHT ) || ( ppm1_width[ ppm1_channel ] < PPM_CH1_MAX_SYNC_LENGHT )
|
||||
{
|
||||
// We have a valid sync symbol
|
||||
sync_error_ch1 = false; // Reset sync error flag
|
||||
|
|
@ -683,6 +713,7 @@ CHECK_LOOP: // Input PPM pins check loop
|
|||
else // We did not find a sync symbol
|
||||
{
|
||||
sync_error_ch1 = true; // Set sync error flag
|
||||
ppm1_channel = 0; // Reset PPM channel counter
|
||||
}
|
||||
|
||||
}
|
||||
|
|
@ -692,29 +723,25 @@ CHECK_LOOP: // Input PPM pins check loop
|
|||
if(sync_ch1 == true) // Are we synchronized ?
|
||||
{
|
||||
// Check if channel pulse lenght is valid
|
||||
if( ppm1_width > ( PPM_CH1_VAL_MAX - PPM_CH1_CHANNEL_PREPULSE_LENGHT ) ) || ( ppm1_width < ( PPM_CH1_VAL_MIN - PPM_CH1_CHANNEL_PREPULSE_LENGHT ) )
|
||||
if( ppm1_width[ ppm1_channel ] > ( PPM_CH1_VAL_MAX - PPM_CH1_CHANNEL_PREPULSE_LENGHT ) ) || ( ppm1_width[ ppm1_channel ] < ( PPM_CH1_VAL_MIN - PPM_CH1_CHANNEL_PREPULSE_LENGHT ) )
|
||||
{
|
||||
// Reset channel error flag
|
||||
channel_error_ch1 = false;
|
||||
|
||||
// todo : copy of PPM1 input channel to PPM output
|
||||
|
||||
if( ppm1_channel = PPM_CH1_CHANNELS ) // Check for last channel
|
||||
if( ppm1_channel == channel_count_ch1 ) // Check for last channel
|
||||
{
|
||||
last_channel_ch1 = true;
|
||||
// Reset PPM channel count and sync flag
|
||||
sync_ch1 = false;
|
||||
ppm1_channel = 0;
|
||||
// We are at latest PPM channel
|
||||
last_channel_ch1 = true; // Set last channel flag
|
||||
sync_ch1 = false; // Reset sync flag
|
||||
ppm1_channel = 0; // Reset PPM channel counter
|
||||
}
|
||||
|
||||
}
|
||||
else // We do not have a valid channel lenght
|
||||
{
|
||||
// Set channel error flag
|
||||
channel_error_ch1 = true;
|
||||
// Reset PPM channel count and sync flag
|
||||
sync_ch1 = false;
|
||||
ppm1_channel = 0;
|
||||
channel_error_ch1 = true; // Set channel error flag
|
||||
sync_ch1 = false; // Reset sync flag
|
||||
ppm1_channel = 0; // Reset PPM channel counter
|
||||
}
|
||||
|
||||
}
|
||||
|
|
@ -727,11 +754,12 @@ CHECK_LOOP: // Input PPM pins check loop
|
|||
//----------------------------------------------------------------------------------------------------------------------
|
||||
// Todo : Conversion to PPM output format
|
||||
// Todo : rework code from line 830 to end of redundancy mode
|
||||
// Todo : channel count reliable auto detection - remove PPM standard extended frame format.
|
||||
// Todo : replace channel count defines with max channels count.
|
||||
// Todo : channel count auto detection : write post processing
|
||||
|
||||
// Todo : sync between PPM input and output after switchover
|
||||
// Todo : Add delay inside switchover algo
|
||||
// Todo : Add LED code for APM 1.4
|
||||
|
||||
//----------------------------------------------------------------------------------------------------------------------
|
||||
|
||||
// -----------------------------------
|
||||
|
|
|
|||
Loading…
Reference in New Issue