Mirror/ardupilot
5
0
Fork 0
mirror of https://github.com/ArduPilot/ardupilot synced 2025-02-10 01:44:00 -04:00
Code Issues Packages Projects Releases Wiki Activity

HAL_AVR: fixes for HAL_GPIO_ define change

Browse Source
This commit is contained in:
Andrew Tridgell 2014-06-02 09:26:19 +10:00
parent 18a64d17d3
commit 3015356671
16 changed files with 59 additions and 56 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
libraries/AP_HAL_AVR/AnalogIn_ADC.cpp
View File

@ -99,7 +99,7 @@ void ADCSource::set_pin(uint8_t pin) {
if (dpin != -1) { if (dpin != -1) {
// enable as input without a pull-up. This gives the // enable as input without a pull-up. This gives the
// best results for our analog sensors // best results for our analog sensors
hal.gpio->pinMode(dpin, GPIO_INPUT); hal.gpio->pinMode(dpin, HAL_GPIO_INPUT);
hal.gpio->write(dpin, 0); hal.gpio->write(dpin, 0);
} }
} }
@ -153,7 +153,7 @@ float ADCSource::_read_average() {
void ADCSource::setup_read() { void ADCSource::setup_read() {
if (_stop_pin != ANALOG_INPUT_NONE) { if (_stop_pin != ANALOG_INPUT_NONE) {
uint8_t digital_pin = hal.gpio->analogPinToDigitalPin(_stop_pin); uint8_t digital_pin = hal.gpio->analogPinToDigitalPin(_stop_pin);
hal.gpio->pinMode(digital_pin, GPIO_OUTPUT); hal.gpio->pinMode(digital_pin, HAL_GPIO_OUTPUT);
hal.gpio->write(digital_pin, 1); hal.gpio->write(digital_pin, 1);
} }
if (_settle_time_ms != 0) { if (_settle_time_ms != 0) {
@ -173,7 +173,7 @@ void ADCSource::setup_read() {
void ADCSource::stop_read() { void ADCSource::stop_read() {
if (_stop_pin != ANALOG_INPUT_NONE) { if (_stop_pin != ANALOG_INPUT_NONE) {
uint8_t digital_pin = hal.gpio->analogPinToDigitalPin(_stop_pin); uint8_t digital_pin = hal.gpio->analogPinToDigitalPin(_stop_pin);
hal.gpio->pinMode(digital_pin, GPIO_OUTPUT); hal.gpio->pinMode(digital_pin, HAL_GPIO_OUTPUT);
hal.gpio->write(digital_pin, 0); hal.gpio->write(digital_pin, 0);
} }
} }

11
libraries/AP_HAL_AVR/GPIO.cpp
View File

@ -48,7 +48,7 @@ void AVRGPIO::pinMode(uint8_t pin, uint8_t mode) {
// JWS: can I let the optimizer do this? // JWS: can I let the optimizer do this?
reg = portModeRegister(port); reg = portModeRegister(port);
if (mode == GPIO_INPUT) { if (mode == HAL_GPIO_INPUT) {
uint8_t oldSREG = SREG; uint8_t oldSREG = SREG;
cli(); cli();
*reg &= ~bit; *reg &= ~bit;
@ -119,7 +119,10 @@ bool AVRGPIO::attach_interrupt(
uint8_t interrupt_num, AP_HAL::Proc proc, uint8_t mode) { uint8_t interrupt_num, AP_HAL::Proc proc, uint8_t mode) {
/* Mode is to set the ISCn0 and ISCn1 bits. /* Mode is to set the ISCn0 and ISCn1 bits.
* These correspond to the GPIO_INTERRUPT_ defs in AP_HAL.h */ * These correspond to the GPIO_INTERRUPT_ defs in AP_HAL.h */
if (!((mode == 0)||(mode == 1)||(mode == 2)||(mode==3))) return false; if (!((mode == HAL_GPIO_INTERRUPT_LOW)||
(mode == HAL_GPIO_INTERRUPT_HIGH)||
(mode == HAL_GPIO_INTERRUPT_FALLING)||
(mode == HAL_GPIO_INTERRUPT_RISING))) return false;
if (interrupt_num == 6) { if (interrupt_num == 6) {
uint8_t oldSREG = SREG; uint8_t oldSREG = SREG;
cli(); cli();
@ -150,7 +153,7 @@ void AVRDigitalSource::mode(uint8_t output) {
volatile uint8_t* reg; volatile uint8_t* reg;
reg = portModeRegister(port); reg = portModeRegister(port);
if (output == GPIO_INPUT) { if (output == HAL_GPIO_INPUT) {
uint8_t oldSREG = SREG; uint8_t oldSREG = SREG;
cli(); cli();
*reg &= ~bit; *reg &= ~bit;
@ -208,7 +211,7 @@ void AVRDigitalSource::toggle() {
bool AVRGPIO::usb_connected(void) bool AVRGPIO::usb_connected(void)
{ {
#if HAL_GPIO_USB_MUX_PIN != -1 #if HAL_GPIO_USB_MUX_PIN != -1
pinMode(HAL_GPIO_USB_MUX_PIN, GPIO_INPUT); pinMode(HAL_GPIO_USB_MUX_PIN, HAL_GPIO_INPUT);
return !read(HAL_GPIO_USB_MUX_PIN); return !read(HAL_GPIO_USB_MUX_PIN);
#else #else
return false; return false;

2
libraries/AP_HAL_AVR/RCInput_APM1.cpp
View File

@ -59,7 +59,7 @@ void APM1RCInput::init(void* _isrregistry) {
/* initialize overrides */ /* initialize overrides */
clear_overrides(); clear_overrides();
/* Arduino pin 49 is ICP4 / PL0, timer 4 input capture */ /* Arduino pin 49 is ICP4 / PL0, timer 4 input capture */
hal.gpio->pinMode(49, GPIO_INPUT); hal.gpio->pinMode(49, HAL_GPIO_INPUT);
/** /**
* WGM: 1 1 1 1. Fast WPM, TOP is in OCR4A * WGM: 1 1 1 1. Fast WPM, TOP is in OCR4A
* COM all disabled * COM all disabled

2
libraries/AP_HAL_AVR/RCInput_APM2.cpp
View File

@ -59,7 +59,7 @@ void APM2RCInput::init(void* _isrregistry) {
/* initialize overrides */ /* initialize overrides */
clear_overrides(); clear_overrides();
/* Arduino pin 48 is ICP5 / PL1, timer 5 input capture */ /* Arduino pin 48 is ICP5 / PL1, timer 5 input capture */
hal.gpio->pinMode(48, GPIO_INPUT); hal.gpio->pinMode(48, HAL_GPIO_INPUT);
/** /**
* WGM: 1 1 1 1. Fast WPM, TOP is in OCR5A * WGM: 1 1 1 1. Fast WPM, TOP is in OCR5A
* COM all disabled * COM all disabled

22
libraries/AP_HAL_AVR/RCOutput_APM1.cpp
View File

@ -13,9 +13,9 @@ extern const AP_HAL::HAL& hal;
/* No init argument required */ /* No init argument required */
void APM1RCOutput::init(void* machtnichts) { void APM1RCOutput::init(void* machtnichts) {
// --------------------- TIMER1: CH_3, CH_4, and CH_10 --------------- // --------------------- TIMER1: CH_3, CH_4, and CH_10 ---------------
hal.gpio->pinMode(11,GPIO_OUTPUT); // CH_10 (PB5/OC1A) hal.gpio->pinMode(11,HAL_GPIO_OUTPUT); // CH_10 (PB5/OC1A)
hal.gpio->pinMode(12,GPIO_OUTPUT); // CH_3 (PB6/OC1B) hal.gpio->pinMode(12,HAL_GPIO_OUTPUT); // CH_3 (PB6/OC1B)
hal.gpio->pinMode(13,GPIO_OUTPUT); // CH_4 (PB7/OC1C) hal.gpio->pinMode(13,HAL_GPIO_OUTPUT); // CH_4 (PB7/OC1C)
// WGM: 1 1 1 0. Clear Timer on Compare, TOP is ICR1. // WGM: 1 1 1 0. Clear Timer on Compare, TOP is ICR1.
// CS11: prescale by 8 => 0.5us tick // CS11: prescale by 8 => 0.5us tick
@ -27,9 +27,9 @@ void APM1RCOutput::init(void* machtnichts) {
OCR1C = 0xFFFF; OCR1C = 0xFFFF;
//--------------- TIMER3: CH_7, CH_8, and CH_11 --------------------- //--------------- TIMER3: CH_7, CH_8, and CH_11 ---------------------
hal.gpio->pinMode(5,GPIO_OUTPUT); // CH_11 (PE3/OC3A) hal.gpio->pinMode(5,HAL_GPIO_OUTPUT); // CH_11 (PE3/OC3A)
hal.gpio->pinMode(2,GPIO_OUTPUT); // CH_8 (PE4/OC3B) hal.gpio->pinMode(2,HAL_GPIO_OUTPUT); // CH_8 (PE4/OC3B)
hal.gpio->pinMode(3,GPIO_OUTPUT); // CH_7 (PE5/OC3C) hal.gpio->pinMode(3,HAL_GPIO_OUTPUT); // CH_7 (PE5/OC3C)
// WGM: 1 1 1 0. Clear timer on Compare, TOP is ICR3 // WGM: 1 1 1 0. Clear timer on Compare, TOP is ICR3
// CS31: prescale by 8 => 0.5us tick // CS31: prescale by 8 => 0.5us tick
@ -43,14 +43,14 @@ void APM1RCOutput::init(void* machtnichts) {
//--------------- TIMER4: CH_6 and CH_5 ---------------------------- //--------------- TIMER4: CH_6 and CH_5 ----------------------------
// NB TIMER4 is shared with PPM input from RCInput_APM1.cpp // NB TIMER4 is shared with PPM input from RCInput_APM1.cpp
// The TIMER4 registers are assumed to be setup already. // The TIMER4 registers are assumed to be setup already.
hal.gpio->pinMode(7,GPIO_OUTPUT); // CH_5 (PH4/OC4B) hal.gpio->pinMode(7,HAL_GPIO_OUTPUT); // CH_5 (PH4/OC4B)
hal.gpio->pinMode(8,GPIO_OUTPUT); // CH_6 (PH5/OC4C) hal.gpio->pinMode(8,HAL_GPIO_OUTPUT); // CH_6 (PH5/OC4C)
//--------------- TIMER5: CH_1, CH_2 and CH_9 ----------------------- //--------------- TIMER5: CH_1, CH_2 and CH_9 -----------------------
hal.gpio->pinMode(46, GPIO_OUTPUT); // CH_9 (PL3/OC5A) hal.gpio->pinMode(46, HAL_GPIO_OUTPUT); // CH_9 (PL3/OC5A)
hal.gpio->pinMode(45, GPIO_OUTPUT); // CH_1 (PL4/OC5B) hal.gpio->pinMode(45, HAL_GPIO_OUTPUT); // CH_1 (PL4/OC5B)
hal.gpio->pinMode(44, GPIO_OUTPUT); // CH_2 (PL5/OC5C) hal.gpio->pinMode(44, HAL_GPIO_OUTPUT); // CH_2 (PL5/OC5C)
// WGM: 1 1 1 0. Clear timer on Compare, TOP is ICR5 // WGM: 1 1 1 0. Clear timer on Compare, TOP is ICR5
// CS51: prescale by 8 => 0.5us tick // CS51: prescale by 8 => 0.5us tick

20
libraries/AP_HAL_AVR/RCOutput_APM2.cpp
View File

@ -13,8 +13,8 @@ extern const AP_HAL::HAL& hal;
/* No init argument required */ /* No init argument required */
void APM2RCOutput::init(void* machtnichts) { void APM2RCOutput::init(void* machtnichts) {
// --------------------- TIMER1: CH_1 and CH_2 ----------------------- // --------------------- TIMER1: CH_1 and CH_2 -----------------------
hal.gpio->pinMode(12,GPIO_OUTPUT); // CH_1 (PB6/OC1B) hal.gpio->pinMode(12,HAL_GPIO_OUTPUT); // CH_1 (PB6/OC1B)
hal.gpio->pinMode(11,GPIO_OUTPUT); // CH_2 (PB5/OC1A) hal.gpio->pinMode(11,HAL_GPIO_OUTPUT); // CH_2 (PB5/OC1A)
// WGM: 1 1 1 0. Clear Timer on Compare, TOP is ICR1. // WGM: 1 1 1 0. Clear Timer on Compare, TOP is ICR1.
// CS11: prescale by 8 => 0.5us tick // CS11: prescale by 8 => 0.5us tick
@ -25,9 +25,9 @@ void APM2RCOutput::init(void* machtnichts) {
OCR1B = 0xFFFF; OCR1B = 0xFFFF;
// --------------- TIMER4: CH_3, CH_4, and CH_5 --------------------- // --------------- TIMER4: CH_3, CH_4, and CH_5 ---------------------
hal.gpio->pinMode(8,GPIO_OUTPUT); // CH_3 (PH5/OC4C) hal.gpio->pinMode(8,HAL_GPIO_OUTPUT); // CH_3 (PH5/OC4C)
hal.gpio->pinMode(7,GPIO_OUTPUT); // CH_4 (PH4/OC4B) hal.gpio->pinMode(7,HAL_GPIO_OUTPUT); // CH_4 (PH4/OC4B)
hal.gpio->pinMode(6,GPIO_OUTPUT); // CH_5 (PH3/OC4A) hal.gpio->pinMode(6,HAL_GPIO_OUTPUT); // CH_5 (PH3/OC4A)
// WGM: 1 1 1 0. Clear Timer on Compare, TOP is ICR4. // WGM: 1 1 1 0. Clear Timer on Compare, TOP is ICR4.
// CS41: prescale by 8 => 0.5us tick // CS41: prescale by 8 => 0.5us tick
@ -39,9 +39,9 @@ void APM2RCOutput::init(void* machtnichts) {
ICR4 = 40000; // 0.5us tick => 50hz freq ICR4 = 40000; // 0.5us tick => 50hz freq
//--------------- TIMER3: CH_6, CH_7, and CH_8 ---------------------- //--------------- TIMER3: CH_6, CH_7, and CH_8 ----------------------
hal.gpio->pinMode(3,GPIO_OUTPUT); // CH_6 (PE5/OC3C) hal.gpio->pinMode(3,HAL_GPIO_OUTPUT); // CH_6 (PE5/OC3C)
hal.gpio->pinMode(2,GPIO_OUTPUT); // CH_7 (PE4/OC3B) hal.gpio->pinMode(2,HAL_GPIO_OUTPUT); // CH_7 (PE4/OC3B)
hal.gpio->pinMode(5,GPIO_OUTPUT); // CH_8 (PE3/OC3A) hal.gpio->pinMode(5,HAL_GPIO_OUTPUT); // CH_8 (PE3/OC3A)
// WGM: 1 1 1 0. Clear timer on Compare, TOP is ICR3 // WGM: 1 1 1 0. Clear timer on Compare, TOP is ICR3
// CS31: prescale by 8 => 0.5us tick // CS31: prescale by 8 => 0.5us tick
@ -55,8 +55,8 @@ void APM2RCOutput::init(void* machtnichts) {
//--------------- TIMER5: CH_10, and CH_11 --------------- //--------------- TIMER5: CH_10, and CH_11 ---------------
// NB TIMER5 is shared with PPM input from RCInput_APM2.cpp // NB TIMER5 is shared with PPM input from RCInput_APM2.cpp
// The TIMER5 registers are assumed to be setup already. // The TIMER5 registers are assumed to be setup already.
hal.gpio->pinMode(45, GPIO_OUTPUT); // CH_10 (PL4/OC5B) hal.gpio->pinMode(45, HAL_GPIO_OUTPUT); // CH_10 (PL4/OC5B)
hal.gpio->pinMode(44, GPIO_OUTPUT); // CH_11 (PL5/OC5C) hal.gpio->pinMode(44, HAL_GPIO_OUTPUT); // CH_11 (PL5/OC5C)
} }
/* Output freq (1/period) control */ /* Output freq (1/period) control */

8
libraries/AP_HAL_AVR/SPIDevice_SPI0.cpp
View File

@ -22,11 +22,11 @@ bool AVRSPI0DeviceDriver::_force_low_speed;
static volatile bool spi0_transferflag = false; static volatile bool spi0_transferflag = false;
void AVRSPI0DeviceDriver::init() { void AVRSPI0DeviceDriver::init() {
hal.gpio->pinMode(SPI0_MISO_PIN, GPIO_INPUT); hal.gpio->pinMode(SPI0_MISO_PIN, HAL_GPIO_INPUT);
hal.gpio->pinMode(SPI0_MOSI_PIN, GPIO_OUTPUT); hal.gpio->pinMode(SPI0_MOSI_PIN, HAL_GPIO_OUTPUT);
hal.gpio->pinMode(SPI0_SCK_PIN, GPIO_OUTPUT); hal.gpio->pinMode(SPI0_SCK_PIN, HAL_GPIO_OUTPUT);
_cs_pin->mode(GPIO_OUTPUT); _cs_pin->mode(HAL_GPIO_OUTPUT);
_cs_pin->write(1); _cs_pin->write(1);
/* Enable the SPI0 peripheral as a master */ /* Enable the SPI0 peripheral as a master */

8
libraries/AP_HAL_AVR/SPIDevice_SPI2.cpp
View File

@ -17,13 +17,13 @@ AVRSemaphore AVRSPI2DeviceDriver::_semaphore;
void AVRSPI2DeviceDriver::init() { void AVRSPI2DeviceDriver::init() {
AVRDigitalSource spi2_miso(_BV(0), PH); AVRDigitalSource spi2_miso(_BV(0), PH);
spi2_miso.mode(GPIO_INPUT); spi2_miso.mode(HAL_GPIO_INPUT);
AVRDigitalSource spi2_mosi(_BV(1), PH); AVRDigitalSource spi2_mosi(_BV(1), PH);
spi2_mosi.mode(GPIO_OUTPUT); spi2_mosi.mode(HAL_GPIO_OUTPUT);
AVRDigitalSource spi2_sck(_BV(2), PH); AVRDigitalSource spi2_sck(_BV(2), PH);
spi2_sck.mode(GPIO_OUTPUT); spi2_sck.mode(HAL_GPIO_OUTPUT);
/* UMSELn1 and UMSELn2: USART in SPI Master mode */ /* UMSELn1 and UMSELn2: USART in SPI Master mode */
UCSR2C = _BV(UMSEL21) | _BV(UMSEL20); UCSR2C = _BV(UMSEL21) | _BV(UMSEL20);
@ -31,7 +31,7 @@ void AVRSPI2DeviceDriver::init() {
UCSR2B = _BV(RXEN2) | _BV(TXEN2); UCSR2B = _BV(RXEN2) | _BV(TXEN2);
/* Setup chip select pin */ /* Setup chip select pin */
_cs_pin->mode(GPIO_OUTPUT); _cs_pin->mode(HAL_GPIO_OUTPUT);
_cs_pin->write(1); _cs_pin->write(1);
} }

8
libraries/AP_HAL_AVR/SPIDevice_SPI3.cpp
View File

@ -26,9 +26,9 @@ void AVRSPI3DeviceDriver::init() {
* by the arduino pin numbers, so we access it directly * by the arduino pin numbers, so we access it directly
* with AVRDigitalSource. */ * with AVRDigitalSource. */
AVRDigitalSource spi3_sck(_BV(2), PJ); AVRDigitalSource spi3_sck(_BV(2), PJ);
spi3_sck.mode(GPIO_OUTPUT); spi3_sck.mode(HAL_GPIO_OUTPUT);
hal.gpio->pinMode(SPI3_MOSI, GPIO_OUTPUT); hal.gpio->pinMode(SPI3_MOSI, HAL_GPIO_OUTPUT);
hal.gpio->pinMode(SPI3_MISO, GPIO_INPUT); hal.gpio->pinMode(SPI3_MISO, HAL_GPIO_INPUT);
/* UMSELn1 and UMSELn2: USART in SPI Master mode */ /* UMSELn1 and UMSELn2: USART in SPI Master mode */
UCSR3C = _BV(UMSEL31) | _BV(UMSEL30); UCSR3C = _BV(UMSEL31) | _BV(UMSEL30);
@ -36,7 +36,7 @@ void AVRSPI3DeviceDriver::init() {
UCSR3B = _BV(RXEN3) | _BV(TXEN3); UCSR3B = _BV(RXEN3) | _BV(TXEN3);
/* Setup chip select pin */ /* Setup chip select pin */
_cs_pin->mode(GPIO_OUTPUT); _cs_pin->mode(HAL_GPIO_OUTPUT);
_cs_pin->write(1); _cs_pin->write(1);
} }

8
libraries/AP_HAL_AVR/examples/Blink/Blink.pde
View File

@ -34,16 +34,16 @@ void loop (void) {
} }
void setup (void) { void setup (void) {
hal.gpio->pinMode(13, GPIO_OUTPUT); hal.gpio->pinMode(13, HAL_GPIO_OUTPUT);
hal.gpio->write(13, 0); hal.gpio->write(13, 0);
a_led = hal.gpio->channel(27); a_led = hal.gpio->channel(27);
b_led = hal.gpio->channel(26); b_led = hal.gpio->channel(26);
c_led = hal.gpio->channel(25); c_led = hal.gpio->channel(25);
a_led->mode(GPIO_OUTPUT); a_led->mode(HAL_GPIO_OUTPUT);
b_led->mode(GPIO_OUTPUT); b_led->mode(HAL_GPIO_OUTPUT);
c_led->mode(GPIO_OUTPUT); c_led->mode(HAL_GPIO_OUTPUT);
a_led->write(0); a_led->write(0);
b_led->write(0); b_led->write(0);

2
libraries/AP_HAL_AVR/examples/LCDTest/LCDTest.pde
View File

@ -58,7 +58,7 @@ LiquidCrystal lcd(8, 9, 4, 5, 6, 7);
void setup() { void setup() {
/* pin 54 is A0 on the mega */ /* pin 54 is A0 on the mega */
hal.gpio->pinMode(54, GPIO_INPUT); hal.gpio->pinMode(54, HAL_GPIO_INPUT);
// set up the LCD's number of columns and rows: // set up the LCD's number of columns and rows:
lcd.begin(16, 2); lcd.begin(16, 2);
// Print a message to the LCD. // Print a message to the LCD.

10
libraries/AP_HAL_AVR/examples/LCDTest/LCrystal.cpp
View File

@ -70,12 +70,12 @@ void LiquidCrystal::init(uint8_t fourbitmode, uint8_t rs, uint8_t rw, uint8_t en
_data_pins[6] = d6; _data_pins[6] = d6;
_data_pins[7] = d7; _data_pins[7] = d7;
hal.gpio->pinMode(_rs_pin, GPIO_OUTPUT); hal.gpio->pinMode(_rs_pin, HAL_GPIO_OUTPUT);
// we can save 1 pin by not using RW. Indicate by passing 255 instead of pin# // we can save 1 pin by not using RW. Indicate by passing 255 instead of pin#
if (_rw_pin != 255) { if (_rw_pin != 255) {
hal.gpio->pinMode(_rw_pin, GPIO_OUTPUT); hal.gpio->pinMode(_rw_pin, HAL_GPIO_OUTPUT);
} }
hal.gpio->pinMode(_enable_pin, GPIO_OUTPUT); hal.gpio->pinMode(_enable_pin, HAL_GPIO_OUTPUT);
if (fourbitmode) if (fourbitmode)
_displayfunction = LCD_4BITMODE | LCD_1LINE | LCD_5x8DOTS; _displayfunction = LCD_4BITMODE | LCD_1LINE | LCD_5x8DOTS;
@ -296,7 +296,7 @@ void LiquidCrystal::pulseEnable(void) {
void LiquidCrystal::write4bits(uint8_t value) { void LiquidCrystal::write4bits(uint8_t value) {
for (int i = 0; i < 4; i++) { for (int i = 0; i < 4; i++) {
hal.gpio->pinMode(_data_pins[i], GPIO_OUTPUT); hal.gpio->pinMode(_data_pins[i], HAL_GPIO_OUTPUT);
hal.gpio->write(_data_pins[i], (value >> i) & 0x01); hal.gpio->write(_data_pins[i], (value >> i) & 0x01);
} }
@ -305,7 +305,7 @@ void LiquidCrystal::write4bits(uint8_t value) {
void LiquidCrystal::write8bits(uint8_t value) { void LiquidCrystal::write8bits(uint8_t value) {
for (int i = 0; i < 8; i++) { for (int i = 0; i < 8; i++) {
hal.gpio->pinMode(_data_pins[i], GPIO_OUTPUT); hal.gpio->pinMode(_data_pins[i], HAL_GPIO_OUTPUT);
hal.gpio->write(_data_pins[i], (value >> i) & 0x01); hal.gpio->write(_data_pins[i], (value >> i) & 0x01);
} }

2
libraries/AP_HAL_AVR/examples/RCInputTest/RCInputTest.pde
View File

@ -61,7 +61,7 @@ void loop (void) {
void setup (void) { void setup (void) {
hal.console->printf_P(PSTR("reading rc in:")); hal.console->printf_P(PSTR("reading rc in:"));
hal.gpio->pinMode(27, GPIO_OUTPUT); hal.gpio->pinMode(27, HAL_GPIO_OUTPUT);
hal.gpio->write(27, 0); hal.gpio->write(27, 0);
} }

2
libraries/AP_HAL_AVR/examples/RCPassthroughTest/RCPassthroughTest.pde
View File

@ -81,7 +81,7 @@ void loop (void) {
} }
void setup (void) { void setup (void) {
hal.gpio->pinMode(27, GPIO_OUTPUT); hal.gpio->pinMode(27, HAL_GPIO_OUTPUT);
hal.gpio->write(27, 0); hal.gpio->write(27, 0);
for (uint8_t i=0; i<16; i++) { for (uint8_t i=0; i<16; i++) {
hal.rcout->enable_ch(i); hal.rcout->enable_ch(i);

2
libraries/AP_HAL_AVR/examples/Scheduler/Scheduler.pde
View File

@ -59,7 +59,7 @@ void schedule_toggle_hang(void *) {
void setup_pin(int pin_num) { void setup_pin(int pin_num) {
hal.console->printf_P(PSTR("Setup pin %d\r\n"), pin_num); hal.console->printf_P(PSTR("Setup pin %d\r\n"), pin_num);
hal.gpio->pinMode(pin_num,GPIO_OUTPUT); hal.gpio->pinMode(pin_num,HAL_GPIO_OUTPUT);
/* Blink so we can see setup on the logic analyzer.*/ /* Blink so we can see setup on the logic analyzer.*/
hal.gpio->write(pin_num,1); hal.gpio->write(pin_num,1);
hal.gpio->write(pin_num,0); hal.gpio->write(pin_num,0);

2
libraries/AP_HAL_AVR/examples/Semaphore/Semaphore.pde
View File

@ -54,7 +54,7 @@ void blink_a3() {
void setup_pin(int pin_num) { void setup_pin(int pin_num) {
hal.console->printf_P(PSTR("Setup pin %d\r\n"), pin_num); hal.console->printf_P(PSTR("Setup pin %d\r\n"), pin_num);
hal.gpio->pinMode(pin_num,GPIO_OUTPUT); hal.gpio->pinMode(pin_num,HAL_GPIO_OUTPUT);
/* Blink so we can see setup on the logic analyzer.*/ /* Blink so we can see setup on the logic analyzer.*/
hal.gpio->write(pin_num,1); hal.gpio->write(pin_num,1);
hal.gpio->write(pin_num,0); hal.gpio->write(pin_num,0);