AP_HAL_ESP32: Migration of ESP32 targets from idf 4.4 to 5.3 consisting of:

- modification of CMakeLists to use new component names of idf 5.3;
- removing big sdkconfig, which changes a lot, when upgrading idf and to use sdkconfig.defaults, which contain only non default defines;
- Updated idf installation packages list, according to espressif documentation;
- Updated README.md to reflect changes in sdkconfig handling;
- Fixed WDT in Scheduler, it was broken with idf 5.3;
- fixed compilation issues with GCC 13 (which is used by idf 5.3);
- fixed bug in case when HAL_ESP32_WIFI defined as 0 (disable wifi)
- Added ESP32 targets sdkconfig (auto generated) to .gitignore

.gitignore

@@ -171,3 +171,7 @@ ENV/
 env.bak/
 venv.bak/
 autotest_result_*_junit.xml
+
+# Ignore ESP-IDF SDK defines
+/libraries/AP_HAL_ESP32/targets/esp32/esp-idf/sdkconfig
+/libraries/AP_HAL_ESP32/targets/esp32s3/esp-idf/sdkconfig

libraries/AP_HAL_ESP32/HAL_ESP32_Class.cpp

@@ -32,13 +32,14 @@
 #include <AP_HAL/SIMState.h>
 #endif
 
-
 static ESP32::UARTDriver cons(0);
 #ifdef HAL_ESP32_WIFI
 #if HAL_ESP32_WIFI == 1
 static ESP32::WiFiDriver serial1Driver; //tcp, client should connect to 192.168.4.1 port 5760
 #elif HAL_ESP32_WIFI == 2
 static ESP32::WiFiUdpDriver serial1Driver; //udp
+#else
+static Empty::UARTDriver serial1Driver;
 #endif
 #else
 static Empty::UARTDriver serial1Driver;

libraries/AP_HAL_ESP32/README.md

@@ -14,11 +14,11 @@ or
 Tools/environment_install/install-prereqs-arch.sh
 ```
 
-3. install esp-idf python deps:
+2. install esp-idf python deps:
 
 ```
 # from: https://docs.espressif.com/projects/esp-idf/en/latest/esp32/get-started/linux-setup.html
-sudo apt-get install git wget flex bison gperf python-setuptools cmake ninja-build ccache libffi-dev libssl-dev dfu-util
+sudo apt-get install git wget flex bison gperf cmake ninja-build ccache libffi-dev libssl-dev dfu-util
 sudo apt-get install python3 python3-pip python3-setuptools
 sudo update-alternatives --install /usr/bin/python python /usr/bin/python3 10
 
@@ -61,7 +61,7 @@ TIPS:
 
  -  we use toolchain and esp-idf from espressif , as a 'git submodule', so no need to preinstall etc.
 https://docs.espressif.com/projects/esp-idf/en/latest/get-started/ -
- (note we currently use https://github.com/espressif/esp-idf/tree/release/v4.0 )
+ (note we currently use https://github.com/espressif/esp-idf/tree/release/v5.3 )
 
 
  -   if you get compile error/s to do with CONFIG... such as
@@ -69,7 +69,12 @@ in expansion of macro 'configSUPPORT_STATIC_ALLOCATION'
 warning: "CONFIG_SUPPORT_STATIC_ALLOCATION" is not defined
 
 this means your 'sdkconfig' file that the IDF relies on is perhaps a bit out of date or out of sync with your IDF.
-So double check you are using the correct IDF version ( buzz's branch uses v3.3 , sh83's probably does not.. and then if you are sure:
+
+You can simply remove sdkconfig file and idf build system will recreate it using sdkconfig.defaults, which should fix the problem.
+
+If you need to change sdkconfig, you can edit sdkconfig manually or to use ninja menuconfig: 
+
+So double check you are using the correct IDF version:
 ```
 cd build/esp32{BOARD}/esp-idf_build
 ninja menuconfig
@@ -81,11 +86,7 @@ press [tab] then enter on the [exit]  box to exit the app
 done.    the 'sdkconfig' file in this folder should have been updated
 cd ../../../..
 
-OR locate the 'libraries/AP_HAL_ESP32/targets/esp32/esp-idf/sdkconfig' and delete it, as it should call back to the 'sdkconfig.defaults' file if its not there.
-
-'cd libraries/AP_HAL_ESP32/targets/esp32/esp-idf ; idf.py defconfig' is the command that updates it, but that shouldn't be needed manually, we don't think.
-
-... try ./waf plane"
+If you want to make changes to sdkconfig (sdkconfig is in git ignore list) permanent and to commit them back in git, you should edit sdkconfig.defaults manually or to use ninja save-defconfig tool after menuconfig.
 
 5. Recommanded way to flash the firmware :
 ```
@@ -114,9 +115,6 @@ ESPTOOL_BAUD=921600
 
 You can find more info here : [ESPTOOL](https://github.com/espressif/esptool)
 
-You can also find the cmake esp-idf project at `libraries/AP_HAL_ESP32/targets/esp32/esp-idf` for idf.py command. But see next section to understand how ardupilot is compiled on ESP32.
-
-
 For flashing from another machine you need the following files:
 ```
 build/<board>/esp-idf_build/bootloader/bootloader.bin 

libraries/AP_HAL_ESP32/SPIDevice.cpp

@@ -60,7 +60,7 @@ SPIDevice::SPIDevice(SPIBus &_bus, SPIDeviceDesc &_device_desc)
     set_device_bus(bus.bus);
     set_device_address(_device_desc.device);
     set_speed(AP_HAL::Device::SPEED_LOW);
-    gpio_pad_select_gpio(device_desc.cs);
+    esp_rom_gpio_pad_select_gpio(device_desc.cs);
     gpio_set_direction(device_desc.cs, GPIO_MODE_OUTPUT);
     gpio_set_level(device_desc.cs, 1);
 

libraries/AP_HAL_ESP32/Scheduler.cpp

@@ -23,8 +23,6 @@
 #include "freertos/FreeRTOS.h"
 #include "freertos/task.h"
 
-#include "soc/rtc_wdt.h"
-#include "esp_int_wdt.h"
 #include "esp_task_wdt.h"
 
 #include <AP_HAL/AP_HAL.h>
@@ -38,39 +36,33 @@ using namespace ESP32;
 extern const AP_HAL::HAL& hal;
 
 bool Scheduler::_initialized = true;
-TaskHandle_t idle_0 = NULL;
-TaskHandle_t idle_1 = NULL;
 
 Scheduler::Scheduler()
 {
     _initialized = false;
 }
 
-void disableCore0WDT()
+Scheduler::~Scheduler()
 {
-     idle_0 = xTaskGetIdleTaskHandleForCPU(0);
-    if (idle_0 == NULL || esp_task_wdt_delete(idle_0) != ESP_OK) {
-        //print("Failed to remove Core 0 IDLE task from WDT");
+    if (_initialized) {
+        esp_task_wdt_deinit();
     }
 }
 
-void disableCore1WDT()
+void Scheduler::wdt_init(uint32_t timeout, uint32_t core_mask)
 {
-     idle_1 = xTaskGetIdleTaskHandleForCPU(1);
-    if (idle_1 == NULL || esp_task_wdt_delete(idle_1) != ESP_OK) {
-        //print("Failed to remove Core 1 IDLE task from WDT");
+    esp_task_wdt_config_t config = {
+        .timeout_ms = timeout,
+        .idle_core_mask = core_mask,
+        .trigger_panic = true
+    };
+
+    if ( ESP_OK != esp_task_wdt_init(&config) ) {
+        printf("esp_task_wdt_init() failed\n");
     }
-}
-void enableCore0WDT()
-{
-    if (idle_0 != NULL && esp_task_wdt_add(idle_0) != ESP_OK) {
-        //print("Failed to add Core 0 IDLE task to WDT");
-    }
-}
-void enableCore1WDT()
-{
-    if (idle_1 != NULL && esp_task_wdt_add(idle_1) != ESP_OK) {
-        //print("Failed to add Core 1 IDLE task to WDT");
+
+    if (ESP_OK != esp_task_wdt_add(NULL)) {
+        printf("esp_task_wdt_add(NULL) failed");
     }
 }
 
@@ -81,11 +73,6 @@ void Scheduler::init()
     printf("%s:%d \n", __PRETTY_FUNCTION__, __LINE__);
 #endif
 
-    // disable wd while booting, as things like mounting the sd-card in the io thread can take a while, especially if there isn't hardware attached.
-    disableCore0WDT(); //FASTCPU
-    disableCore1WDT(); //SLOWCPU
-
-
     hal.console->printf("%s:%d running with CONFIG_FREERTOS_HZ=%d\n", __PRETTY_FUNCTION__, __LINE__,CONFIG_FREERTOS_HZ);
 
     // keep main tasks that need speed on CPU 0
@@ -140,11 +127,6 @@ void Scheduler::init()
     }
 
     //   xTaskCreatePinnedToCore(_print_profile, "APM_PROFILE", IO_SS, this, IO_PRIO, nullptr,SLOWCPU);
-
-    hal.console->printf("OK Sched Init, enabling WD\n");
-    enableCore0WDT();   //FASTCPU
-    //enableCore1WDT();   //we don't enable WD on SLOWCPU right now.
-
 }
 
 template <typename T>
@@ -232,7 +214,7 @@ void IRAM_ATTR Scheduler::delay(uint16_t ms)
 void IRAM_ATTR Scheduler::delay_microseconds(uint16_t us)
 {
     if (in_main_thread() && us < 100) {
-        ets_delay_us(us);
+        esp_rom_delay_us(us);
     } else { // Minimum delay for FreeRTOS is 1ms
         uint32_t tick = portTICK_PERIOD_MS * 1000;
 
@@ -571,6 +553,10 @@ void IRAM_ATTR Scheduler::_main_thread(void *arg)
 
     sched->set_system_initialized();
 
+    //initialize WTD for current thread on FASTCPU, all cores will be (1 << CONFIG_FREERTOS_NUMBER_OF_CORES) - 1
+    wdt_init( TWDT_TIMEOUT_MS, 1 << FASTCPU ); // 3 sec
+
+
 #ifdef SCHEDDEBUG
     printf("%s:%d initialised\n", __PRETTY_FUNCTION__, __LINE__);
 #endif
@@ -581,6 +567,10 @@ void IRAM_ATTR Scheduler::_main_thread(void *arg)
         // run stats periodically
         sched->print_stats();
         sched->print_main_loop_rate();
+
+        if (ESP_OK != esp_task_wdt_reset()) {
+            printf("esp_task_wdt_reset() failed\n");
+        };
     }
 }
 

libraries/AP_HAL_ESP32/Scheduler.h

@@ -23,7 +23,7 @@
 
 #define ESP32_SCHEDULER_MAX_TIMER_PROCS 10
 #define ESP32_SCHEDULER_MAX_IO_PROCS 10
-
+#define TWDT_TIMEOUT_MS 3000
 
 /* Scheduler implementation: */
 class ESP32::Scheduler : public AP_HAL::Scheduler
@@ -31,6 +31,7 @@ class ESP32::Scheduler : public AP_HAL::Scheduler
 
 public:
     Scheduler();
+    ~Scheduler();
     /* AP_HAL::Scheduler methods */
     void     init() override;
     void     set_callbacks(AP_HAL::HAL::Callbacks *cb)
@@ -130,6 +131,8 @@ private:
 
     static void test_esc(void* arg);
 
+    static void wdt_init(uint32_t timeout, uint32_t core_mask);
+
     bool _in_timer_proc;
     void _run_timers();
     Semaphore _timer_sem;

libraries/AP_HAL_ESP32/SdCard.cpp

@@ -32,8 +32,6 @@
 #include <sys/types.h>
 #include "SPIDevice.h"
 
-#include "soc/rtc_wdt.h"
-
 #ifdef HAL_ESP32_SDCARD
 
 #if CONFIG_IDF_TARGET_ESP32S2 ||CONFIG_IDF_TARGET_ESP32C3
@@ -254,8 +252,8 @@ void mount_sdcard()
 {
     mount_sdcard_spi();
 }
-#endif // end spi
 
+#endif // end spi
 
 bool sdcard_retry(void)
 {
@@ -265,16 +263,14 @@ bool sdcard_retry(void)
     return sdcard_running;
 }
 
-
 void unmount_sdcard()
 {
     if (card != nullptr) {
-        esp_vfs_fat_sdmmc_unmount();
+        esp_vfs_fat_sdcard_unmount( "/SDCARD", card);
     }
     sdcard_running = false;
 }
 
-
 #else
 // empty impl's
 void mount_sdcard()

libraries/AP_HAL_ESP32/Semaphores.cpp

@@ -106,7 +106,7 @@ void BinarySemaphore::signal_ISR()
 {
     BaseType_t xHigherPriorityTaskWoken = pdFALSE;
     xSemaphoreGiveFromISR(_sem, &xHigherPriorityTaskWoken);
-    portYIELD_FROM_ISR(xHigherPriorityTaskWoken);
+    portYIELD_FROM_ISR_ARG(xHigherPriorityTaskWoken);
 }
 
 BinarySemaphore::~BinarySemaphore(void)

libraries/AP_HAL_ESP32/UARTDriver.cpp

@@ -55,7 +55,7 @@ void UARTDriver::_begin(uint32_t b, uint16_t rxS, uint16_t txS)
                          uart_desc[uart_num].rx,
                          UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE);
             //uart_driver_install(p, 2*UART_FIFO_LEN, 0, 0, nullptr, 0);
-            uart_driver_install(p, 2*UART_FIFO_LEN, 0, 0, nullptr, 0);
+            uart_driver_install(p, 2*UART_HW_FIFO_LEN(p), 0, 0, nullptr, 0);
             _readbuf.set_size(RX_BUF_SIZE);
             _writebuf.set_size(TX_BUF_SIZE);
 

libraries/AP_HAL_ESP32/Util.cpp

@@ -35,6 +35,7 @@
 #include "esp_heap_caps.h"
 #include <AP_Common/ExpandingString.h>
 
+#include "esp_mac.h"
 
 extern const AP_HAL::HAL& hal;
 

libraries/AP_HAL_ESP32/WiFiDriver.cpp

@@ -145,7 +145,7 @@ bool WiFiDriver::start_listen()
 bool WiFiDriver::try_accept()
 {
     struct sockaddr_in sourceAddr;
-    uint addrLen = sizeof(sourceAddr);
+    socklen_t addrLen = sizeof(sourceAddr);
     short i = available_socket();
     if (i != WIFI_MAX_CONNECTION) {
         socket_list[i] = accept(accept_socket, (struct sockaddr *)&sourceAddr, &addrLen);
@@ -246,7 +246,7 @@ static void _sta_event_handler(void* arg, esp_event_base_t event_base,
 void WiFiDriver::initialize_wifi()
 {
 #ifndef WIFI_PWD
-    #default WIFI_PWD "ardupilot1"
+    #define WIFI_PWD "ardupilot1"
 #endif
     //Initialize NVS
     esp_err_t ret = nvs_flash_init();

libraries/AP_HAL_ESP32/WiFiUdpDriver.cpp

@@ -32,7 +32,7 @@
 #include "lwip/sys.h"
 #include "lwip/netdb.h"
 
-#include "soc/rtc_wdt.h"
+#include "freertos/idf_additions.h"
 
 using namespace ESP32;
 
@@ -215,7 +215,7 @@ static void _sta_event_handler(void* arg, esp_event_base_t event_base,
 void WiFiUdpDriver::initialize_wifi()
 {
 #ifndef WIFI_PWD
-    #default WIFI_PWD "ardupilot1"
+    #define WIFI_PWD "ardupilot1"
 #endif
     //Initialize NVS
     esp_err_t ret = nvs_flash_init();

libraries/AP_HAL_ESP32/i2c_sw.c

@@ -126,8 +126,9 @@ void i2c_init(_i2c_bus_t* bus)
         case 160: bus->delay = _i2c_delays[bus->speed][1]; break;
         case 240: bus->delay = _i2c_delays[bus->speed][2]; break;
         default : DEBUG("i2c I2C software implementation is not "
-                                      "supported for this CPU frequency: %d MHz\n",
-                               ets_get_cpu_frequency());
+                        "supported for this CPU frequency: %u MHz\n",
+                        (unsigned int)ets_get_cpu_frequency()
+                       );
             return;
     }
 

libraries/AP_HAL_ESP32/targets/esp32/esp-idf/CMakeLists.txt

@@ -15,15 +15,22 @@ idf_build_process(esp32
     # although esptool_py does not generate static library,
     # processing the component is needed for flashing related
     # targets and file generation
-    COMPONENTS esp32
-               freertos
-               tcpip_adapter
+    COMPONENTS  freertos
                 fatfs
-               esp_adc_cal
                 nvs_flash
                 esptool_py
                 app_update
+                esp_adc
+                esp_driver_mcpwm
+                driver
+                lwip
+                esp_wifi
+                esp_system
+                esp_rom
+                esp_timer
+                
     SDKCONFIG ${CMAKE_CURRENT_LIST_DIR}/sdkconfig
+    SDKCONFIG_DEFAULTS ${CMAKE_CURRENT_LIST_DIR}/sdkconfig.defaults
     BUILD_DIR ${CMAKE_BINARY_DIR})
 
 set(elf_file ardupilot.elf)
@@ -94,14 +101,19 @@ add_custom_target(showinc ALL
 
 # Link the static libraries to the executable
 target_link_libraries(${elf_file}
-                idf::esp32
                 idf::freertos
                 idf::fatfs
-                idf::esp_adc_cal
                 idf::nvs_flash
                 idf::spi_flash
-                idf::tcpip_adapter
                 idf::app_update
+                idf::esp_adc
+                idf::esp_driver_mcpwm
+                idf::driver
+                idf::lwip
+                idf::esp_wifi
+                idf::esp_system
+                idf::esp_rom
+                idf::esp_timer
                 )
 
 # Attach additional targets to the executable file for flashing,

libraries/AP_HAL_ESP32/targets/esp32/esp-idf/sdkconfig.defaults

@@ -0,0 +1,51 @@
+# This file was generated using idf.py save-defconfig. It can be edited manually.
+# Espressif IoT Development Framework (ESP-IDF) 5.3.1 Project Minimal Configuration
+#
+CONFIG_BOOTLOADER_LOG_LEVEL_ERROR=y
+CONFIG_BOOTLOADER_WDT_ENABLE=n
+CONFIG_APP_COMPILE_TIME_DATE=n
+CONFIG_APP_EXCLUDE_PROJECT_VER_VAR=y
+CONFIG_APP_EXCLUDE_PROJECT_NAME_VAR=y
+CONFIG_APP_RETRIEVE_LEN_ELF_SHA=16
+CONFIG_ESPTOOLPY_FLASHMODE_QIO=y
+CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
+CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
+CONFIG_PARTITION_TABLE_CUSTOM=y
+CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="../partitions.csv"
+CONFIG_COMPILER_OPTIMIZATION_PERF=y
+CONFIG_TWAI_ERRATA_FIX_BUS_OFF_REC=n
+CONFIG_TWAI_ERRATA_FIX_TX_INTR_LOST=n
+CONFIG_TWAI_ERRATA_FIX_RX_FRAME_INVALID=n
+CONFIG_TWAI_ERRATA_FIX_RX_FIFO_CORRUPT=n
+CONFIG_TWAI_ERRATA_FIX_LISTEN_ONLY_DOM=n
+CONFIG_SPI_MASTER_IN_IRAM=y
+CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_TWO=y
+CONFIG_ESP_PHY_REDUCE_TX_POWER=y
+CONFIG_PM_ENABLE=y
+CONFIG_ESP_INT_WDT=n
+CONFIG_ESP_TASK_WDT_INIT=n
+CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM=2
+CONFIG_ESP_WIFI_DYNAMIC_RX_BUFFER_NUM=16
+CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER_NUM=16
+CONFIG_ESP_WIFI_RX_BA_WIN=4
+CONFIG_ESP_WIFI_TASK_PINNED_TO_CORE_1=y
+CONFIG_ESP_WIFI_STA_DISCONNECTED_PM_ENABLE=n
+CONFIG_ESP_WIFI_GMAC_SUPPORT=n
+CONFIG_FREERTOS_HZ=1000
+CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS=10
+CONFIG_FREERTOS_VTASKLIST_INCLUDE_COREID=y
+CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS=y
+CONFIG_FREERTOS_ISR_STACKSIZE=2100
+CONFIG_FREERTOS_CORETIMER_1=y
+CONFIG_FREERTOS_ENABLE_BACKWARD_COMPATIBILITY=y
+CONFIG_LWIP_MAX_SOCKETS=5
+CONFIG_LWIP_TCP_SYNMAXRTX=6
+CONFIG_LWIP_TCP_MSS=1436
+CONFIG_LWIP_TCP_SND_BUF_DEFAULT=5744
+CONFIG_LWIP_TCP_WND_DEFAULT=5744
+CONFIG_LWIP_TCP_RTO_TIME=3000
+CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU1=y
+CONFIG_ADC_SUPPRESS_DEPRECATE_WARN=y
+CONFIG_ADC_CALI_SUPPRESS_DEPRECATE_WARN=y
+CONFIG_MCPWM_SUPPRESS_DEPRECATE_WARN=y
+CONFIG_RMT_SUPPRESS_DEPRECATE_WARN=y

libraries/AP_HAL_ESP32/targets/esp32s3/esp-idf/CMakeLists.txt

@@ -15,16 +15,24 @@ idf_build_process(esp32s3
     # although esptool_py does not generate static library,
     # processing the component is needed for flashing related
     # targets and file generation
-    COMPONENTS esp32s3
-               freertos
-               tcpip_adapter
+    COMPONENTS freertos
                fatfs
-               esp_adc_cal
                nvs_flash
                esptool_py
                app_update
+               esp_adc
+               esp_driver_mcpwm
+               driver
+               lwip
+               esp_wifi
+               esp_system
+               esp_rom
+               esp_timer
+
     SDKCONFIG ${CMAKE_CURRENT_LIST_DIR}/sdkconfig
-    BUILD_DIR ${CMAKE_BINARY_DIR})
+    SDKCONFIG_DEFAULTS ${CMAKE_CURRENT_LIST_DIR}/sdkconfig.defaults
+    BUILD_DIR ${CMAKE_BINARY_DIR}
+)
 
 set(elf_file ardupilot.elf)
 
@@ -93,14 +101,19 @@ add_custom_target(showinc ALL
 
 # Link the static libraries to the executable
 target_link_libraries(${elf_file}
-                idf::esp32s3
                 idf::freertos
                 idf::fatfs
-                idf::esp_adc_cal
                 idf::nvs_flash
                 idf::spi_flash
-                idf::tcpip_adapter
                 idf::app_update
+                idf::esp_adc
+                idf::esp_driver_mcpwm
+                idf::driver
+                idf::lwip
+                idf::esp_wifi
+                idf::esp_system
+                idf::esp_rom
+                idf::esp_timer
                 )
 
 # Attach additional targets to the executable file for flashing,

libraries/AP_HAL_ESP32/targets/esp32s3/esp-idf/sdkconfig.defaults

@@ -0,0 +1,43 @@
+# This file was generated using idf.py save-defconfig. It can be edited manually.
+# Espressif IoT Development Framework (ESP-IDF) 5.3.1 Project Minimal Configuration
+#
+CONFIG_IDF_TARGET="esp32s3"
+CONFIG_BOOTLOADER_LOG_LEVEL_ERROR=y
+CONFIG_BOOTLOADER_WDT_ENABLE=n
+CONFIG_APP_COMPILE_TIME_DATE=n
+CONFIG_APP_EXCLUDE_PROJECT_VER_VAR=y
+CONFIG_APP_EXCLUDE_PROJECT_NAME_VAR=y
+CONFIG_APP_RETRIEVE_LEN_ELF_SHA=16
+CONFIG_ESPTOOLPY_FLASHMODE_QIO=y
+CONFIG_ESPTOOLPY_FLASHSIZE_8MB=y
+CONFIG_PARTITION_TABLE_CUSTOM=y
+CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="../partitions.csv"
+CONFIG_PARTITION_TABLE_OFFSET=0x10000
+CONFIG_COMPILER_OPTIMIZATION_PERF=y
+CONFIG_TWAI_ERRATA_FIX_LISTEN_ONLY_DOM=n
+CONFIG_SPI_MASTER_IN_IRAM=y
+CONFIG_ESP32S3_UNIVERSAL_MAC_ADDRESSES_TWO=y
+CONFIG_ESP_SLEEP_FLASH_LEAKAGE_WORKAROUND=n
+CONFIG_ESP_SLEEP_GPIO_RESET_WORKAROUND=n
+CONFIG_ESP32S3_INSTRUCTION_CACHE_32KB=y
+CONFIG_ESP_INT_WDT=n
+CONFIG_ESP_TASK_WDT_INIT=n
+CONFIG_ESP_IPC_TASK_STACK_SIZE=1536
+CONFIG_ESP_WIFI_TASK_PINNED_TO_CORE_1=y
+CONFIG_ESP_WIFI_STA_DISCONNECTED_PM_ENABLE=n
+CONFIG_ESP_WIFI_GMAC_SUPPORT=n
+CONFIG_FREERTOS_HZ=1000
+CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS=10
+CONFIG_FREERTOS_VTASKLIST_INCLUDE_COREID=y
+CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS=y
+CONFIG_FREERTOS_ISR_STACKSIZE=2100
+CONFIG_FREERTOS_CORETIMER_SYSTIMER_LVL3=y
+CONFIG_FREERTOS_ENABLE_BACKWARD_COMPATIBILITY=y
+CONFIG_LWIP_MAX_SOCKETS=5
+CONFIG_LWIP_TCP_SND_BUF_DEFAULT=5744
+CONFIG_LWIP_TCP_WND_DEFAULT=5744
+CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU1=y
+CONFIG_ADC_SUPPRESS_DEPRECATE_WARN=y
+CONFIG_ADC_CALI_SUPPRESS_DEPRECATE_WARN=y
+CONFIG_MCPWM_SUPPRESS_DEPRECATE_WARN=y
+CONFIG_RMT_SUPPRESS_DEPRECATE_WARN=y