This commit is contained in:
James Goppert 2011-10-16 02:58:38 -04:00
commit 185a24a3ae
27 changed files with 2324 additions and 613 deletions

View File

@ -52,3 +52,22 @@
//#define RATE_ROLL_I 0.18
//#define RATE_PITCH_I 0.18
// agmatthews USERHOOKS
// the choice of function names is up to the user and does not have to match these
// uncomment these hooks and ensure there is a matching function un your "UserCode.pde" file
//#define USERHOOK_FASTLOOP userhook_FastLoop();
#define USERHOOK_50HZLOOP userhook_50Hz();
//#define USERHOOK_MEDIUMLOOP userhook_MediumLoop();
//#define USERHOOK_SLOWLOOP userhook_SlowLoop();
//#define USERHOOK_SUPERSLOWLOOP userhook_SuperSlowLoop();
#define USERHOOK_INIT userhook_init();
// the choice of includeed variables file (*.h) is up to the user and does not have to match this one
// Ensure the defined file exists and is in the arducopter directory
#define USERHOOK_VARIABLES "UserVariables.h"

View File

@ -1,6 +1,6 @@
/// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
#define THISFIRMWARE "ArduCopter V2.0.48 Beta"
#define THISFIRMWARE "ArduCopter V2.0.49 Beta"
/*
ArduCopter Version 2.0 Beta
Authors: Jason Short
@ -210,6 +210,14 @@ ModeFilter sonar_mode_filter;
#error Unrecognised SONAR_TYPE setting.
#endif
// agmatthews USERHOOKS
////////////////////////////////////////////////////////////////////////////////
// User variables
////////////////////////////////////////////////////////////////////////////////
#ifdef USERHOOK_VARIABLES
#include USERHOOK_VARIABLES
#endif
////////////////////////////////////////////////////////////////////////////////
// Global variables
////////////////////////////////////////////////////////////////////////////////
@ -425,13 +433,13 @@ static int event_repeat; // how many times to fire : 0 = forever, 1 = do
static int event_value; // per command value, such as PWM for servos
static int event_undo_value; // the value used to undo commands
//static byte repeat_forever;
static byte undo_event; // counter for timing the undo
//static byte undo_event; // counter for timing the undo
// delay command
// --------------
static long condition_value; // used in condition commands (eg delay, change alt, etc.)
static long condition_start;
static int condition_rate;
//static int condition_rate;
// land command
// ------------
@ -445,12 +453,10 @@ static struct Location prev_WP; // last waypoint
static struct Location current_loc; // current location
static struct Location next_WP; // next waypoint
static struct Location target_WP; // where do we want to you towards?
static struct Location simple_WP; //
static struct Location next_command; // command preloaded
static struct Location guided_WP; // guided mode waypoint
static long target_altitude; // used for
static boolean home_is_set; // Flag for if we have g_gps lock and have set the home location
static boolean new_location; // flag to tell us if location has been updated
// IMU variables
// -------------
@ -567,6 +573,12 @@ static void fast_loop()
//if(motor_armed)
//Log_Write_Attitude();
// agmatthews - USERHOOKS
#ifdef USERHOOK_FASTLOOP
USERHOOK_FASTLOOP
#endif
}
static void medium_loop()
@ -721,6 +733,10 @@ static void medium_loop()
medium_loopCounter = 0;
break;
}
// agmatthews - USERHOOKS
#ifdef USERHOOK_MEDIUMLOOP
USERHOOK_MEDIUMLOOP
#endif
}
@ -737,6 +753,10 @@ static void fifty_hz_loop()
if(g.sonar_enabled){
sonar_alt = sonar.read();
}
// agmatthews - USERHOOKS
#ifdef USERHOOK_50HZLOOP
USERHOOK_50HZLOOP
#endif
#if HIL_MODE != HIL_MODE_DISABLED && FRAME_CONFIG != HELI_FRAME
// HIL for a copter needs very fast update of the servo values
@ -833,6 +853,11 @@ static void slow_loop()
break;
}
// agmatthews - USERHOOKS
#ifdef USERHOOK_SLOWLOOP
USERHOOK_SLOWLOOP
#endif
}
// 1Hz loop
@ -842,6 +867,10 @@ static void super_slow_loop()
Log_Write_Current();
gcs_send_message(MSG_HEARTBEAT);
// agmatthews - USERHOOKS
#ifdef USERHOOK_SUPERSLOWLOOP
USERHOOK_SUPERSLOWLOOP
#endif
}
static void update_GPS(void)
@ -1047,9 +1076,14 @@ static void update_navigation()
case GUIDED:
wp_control = WP_MODE;
// check if we are close to point > loiter
verify_nav_wp();
wp_verify_byte = 0;
verify_nav_wp();
update_auto_yaw();
if (wp_control == WP_MODE) {
update_auto_yaw();
} else {
set_mode(LOITER);
}
update_nav_wp();
break;

View File

@ -20,8 +20,11 @@ camera_stabilization()
// allow control mixing
g.rc_camera_pitch.set_pwm(APM_RC.InputCh(CH_6)); // I'm using CH 6 input here.
g.rc_camera_pitch.servo_out = g.rc_camera_pitch.control_mix(dcm.pitch_sensor);
g.rc_camera_pitch.servo_out = (float)g.rc_camera_pitch.servo_out * g.camera_pitch_gain;
// limit
g.rc_camera_pitch.servo_out = constrain(g.rc_camera_pitch.servo_out, -4500, 4500);
//g.rc_camera_pitch.servo_out = constrain(g.rc_camera_pitch.servo_out, -4500, 4500);
// dont allow control mixing
/*
@ -38,10 +41,10 @@ camera_stabilization()
*/
// dont allow control mixing
g.rc_camera_roll.servo_out = (float)-dcm.roll_sensor * g.camera_roll_gain;
// limit
g.rc_camera_roll.servo_out = constrain(-dcm.roll_sensor, -4500, 4500);
//g.rc_camera_roll.servo_out = constrain(-dcm.roll_sensor, -4500, 4500);
// Output
// ------

View File

@ -17,7 +17,7 @@ public:
// The increment will prevent old parameters from being used incorrectly
// by newer code.
//
static const uint16_t k_format_version = 110;
static const uint16_t k_format_version = 111;
// The parameter software_type is set up solely for ground station use
// and identifies the software type (eg ArduPilotMega versus ArduCopterMega)
@ -128,6 +128,8 @@ public:
k_param_throttle_cruise,
k_param_esc_calibrate,
k_param_radio_tuning,
k_param_camera_pitch_gain,
k_param_camera_roll_gain,
//
// 210: flight modes
@ -262,6 +264,8 @@ public:
RC_Channel rc_8;
RC_Channel rc_camera_pitch;
RC_Channel rc_camera_roll;
AP_Float camera_pitch_gain;
AP_Float camera_roll_gain;
// PI/D controllers
APM_PI pi_rate_roll;
@ -364,8 +368,13 @@ public:
rc_6 (k_param_rc_6, PSTR("RC6_")),
rc_7 (k_param_rc_7, PSTR("RC7_")),
rc_8 (k_param_rc_8, PSTR("RC8_")),
rc_camera_pitch (k_param_rc_9, PSTR("RC_CP_")),
rc_camera_roll (k_param_rc_10, PSTR("RC_CR_")),
rc_camera_pitch (k_param_rc_9, PSTR("CAM_P_")),
rc_camera_roll (k_param_rc_10, PSTR("CAM_R_")),
// variable default key name
//-------------------------------------------------------------------------------------------------------------------
camera_pitch_gain (CAM_PITCH_GAIN, k_param_camera_pitch_gain, PSTR("CAM_P_G")),
camera_roll_gain (CAM_ROLL_GAIN, k_param_camera_roll_gain, PSTR("CAM_R_G")),
// PI controller group key name initial P initial I initial imax
//--------------------------------------------------------------------------------------------------------------------------------------------------------------------

15
ArduCopter/UserCode.pde Normal file
View File

@ -0,0 +1,15 @@
// agmatthews USERHOOKS
void userhook_init()
{
// put your initialisation code here
}
void userhook_50Hz()
{
// put your 50Hz code here
}

View File

@ -0,0 +1,13 @@
// agmatthews USERHOOKS
// user defined variables
// example variables used in Wii camera testing - replace with your own variables
#if WII_CAMERA == 1
WiiCamera ircam;
int WiiRange=0;
int WiiRotation=0;
int WiiDisplacementX=0;
int WiiDisplacementY=0;
#endif

View File

@ -179,6 +179,16 @@
#endif
//////////////////////////////////////////////////////////////////////////////
// CAMERA GAINS
#ifndef CAM_ROLL_GAIN
# define CAM_ROLL_GAIN 1.0
#endif
#ifndef CAM_PITCH_GAIN
# define CAM_PITCH_GAIN 1.0
#endif
//////////////////////////////////////////////////////////////////////////////
// OPTICAL_FLOW
#if defined( __AVR_ATmega2560__ ) // determines if optical flow code is included
@ -451,15 +461,13 @@
#endif
#ifndef WAYPOINT_SPEED_MAX
# define WAYPOINT_SPEED_MAX 300 // for 6m/s error = 13mph
# define WAYPOINT_SPEED_MAX 400 // for 6m/s error = 13mph
#endif
//////////////////////////////////////////////////////////////////////////////
// Throttle control gains
//
#ifndef THROTTLE_CRUISE
# define THROTTLE_CRUISE 350 //
#endif

View File

@ -42,23 +42,24 @@ static void reset_control_switch()
read_control_switch();
}
#if CH7_OPTION == CH7_SET_HOVER
static boolean trim_flag;
#endif
// read at 10 hz
// set this to your trainer switch
static void read_trim_switch()
{
#if CH7_OPTION == CH7_FLIP
#if CH7_OPTION == CH7_FLIP
if (g.rc_7.control_in > 800 && g.rc_3.control_in != 0){
do_flip = true;
}
#elif CH7_OPTION == CH7_SIMPLE_MODE
#elif CH7_OPTION == CH7_SIMPLE_MODE
do_simple = (g.rc_7.control_in > 800);
//Serial.println(g.rc_7.control_in, DEC);
#elif CH7_OPTION == CH7_RTL
#elif CH7_OPTION == CH7_RTL
static bool ch7_rtl_flag = false;
if (ch7_rtl_flag == false && g.rc_7.control_in > 800){
@ -73,7 +74,7 @@ static void read_trim_switch()
}
}
#elif CH7_OPTION == CH7_SET_HOVER
#elif CH7_OPTION == CH7_SET_HOVER
// switch is engaged
if (g.rc_7.control_in > 800){
trim_flag = true;
@ -90,17 +91,19 @@ static void read_trim_switch()
trim_flag = false;
}
}
#elif CH7_OPTION == CH7_ADC_FILTER
#elif CH7_OPTION == CH7_ADC_FILTER
if (g.rc_7.control_in > 800){
adc.filter_result = true;
}else{
adc.filter_result = false;
}
#elif CH7_OPTION == CH7_AUTO_TRIM
#elif CH7_OPTION == CH7_AUTO_TRIM
if (g.rc_7.control_in > 800){
auto_level_counter = 10;
}
#endif
#endif
}

View File

@ -136,9 +136,11 @@ static void heli_move_swash(int roll_out, int pitch_out, int coll_out, int yaw_o
APM_RC.OutputCh(CH_7, g.heli_ext_gyro_gain);
}
// InstantPWM - force message to the servos
#if INSTANT_PWM == 1
// InstantPWM
APM_RC.Force_Out0_Out1();
APM_RC.Force_Out2_Out3();
#endif
// reset the averaging
heli_servo_out_count = 0;
@ -149,6 +151,15 @@ static void heli_move_swash(int roll_out, int pitch_out, int coll_out, int yaw_o
}
}
static void init_motors_out()
{
#if INSTANT_PWM == 0
ICR5 = 5000; // 400 hz output CH 1, 2, 9
ICR1 = 5000; // 400 hz output CH 3, 4, 10
ICR3 = 40000; // 50 hz output CH 7, 8, 11
#endif
}
// these are not really motors, they're servos but we don't rename the function because it fits with the rest of the code better
static void output_motors_armed()
{

View File

@ -95,9 +95,16 @@ static void calc_loiter(int x_error, int y_error)
// nav_roll, nav_pitch
static void calc_loiter_pitch_roll()
{
float temp = radians((float)(9000 - (dcm.yaw_sensor))/100.0);
float _cos_yaw_x = cos(temp);
float _sin_yaw_y = sin(temp);
// Serial.printf("ys %ld, cyx %1.4f, _cyx %1.4f\n", dcm.yaw_sensor, cos_yaw_x, _cos_yaw_x);
// rotate the vector
nav_roll = (float)nav_lon * sin_yaw_y - (float)nav_lat * cos_yaw_x;
nav_pitch = (float)nav_lon * cos_yaw_x + (float)nav_lat * sin_yaw_y;
nav_roll = (float)nav_lon * _sin_yaw_y - (float)nav_lat * _cos_yaw_x;
nav_pitch = (float)nav_lon * _cos_yaw_x + (float)nav_lat * _sin_yaw_y;
// flip pitch because forward is negative
nav_pitch = -nav_pitch;
@ -115,7 +122,12 @@ static void calc_nav_rate(int max_speed)
// limit the ramp up of the speed
if(waypoint_speed_gov < max_speed){
waypoint_speed_gov += 10;
waypoint_speed_gov += (int)(150.0 * dTnav); // increase at 1.5/ms
// go at least 1m/s
max_speed = max(100, waypoint_speed_gov);
// limit with governer
max_speed = min(max_speed, waypoint_speed_gov);
}
@ -232,7 +244,7 @@ static void reset_crosstrack()
crosstrack_bearing = get_bearing(&current_loc, &next_WP); // Used for track following
}
*/
static long get_altitude_above_home(void)
/*static long get_altitude_above_home(void)
{
// This is the altitude above the home location
// The GPS gives us altitude at Sea Level
@ -240,7 +252,7 @@ static long get_altitude_above_home(void)
// -------------------------------------------------------------
return current_loc.alt - home.alt;
}
*/
// distance is returned in meters
static long get_distance(struct Location *loc1, struct Location *loc2)
{
@ -252,12 +264,12 @@ static long get_distance(struct Location *loc1, struct Location *loc2)
float dlong = ((float)(loc2->lng - loc1->lng)) * scaleLongDown;
return sqrt(sq(dlat) + sq(dlong)) * .01113195;
}
/*
static long get_alt_distance(struct Location *loc1, struct Location *loc2)
{
return abs(loc1->alt - loc2->alt);
}
*/
static long get_bearing(struct Location *loc1, struct Location *loc2)
{
long off_x = loc2->lng - loc1->lng;

View File

@ -184,11 +184,3 @@ static void trim_radio()
g.rc_4.save_eeprom();
}
static void trim_yaw()
{
for (byte i = 0; i < 30; i++){
read_radio();
}
g.rc_4.trim(); // yaw
}

View File

@ -1,112 +0,0 @@
/// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
#if 0
#define INPUT_BUF_LEN 40
char input_buffer[INPUT_BUF_LEN];
static void readCommands(void)
{
static byte header[2];
const byte read_GS_header[] = {0x21, 0x21}; //!! Used to verify the payload msg header
if(Serial.available()){
//Serial.println("Serial.available");
byte bufferPointer;
header[0] = Serial.read();
header[1] = Serial.read();
if((header[0] == read_GS_header[0]) && (header[1] == read_GS_header[1])){
// Block until we read full command
// --------------------------------
delay(20);
byte incoming_val = 0;
// Ground Station communication
// ----------------------------
while(Serial.available() > 0)
{
incoming_val = Serial.read();
if (incoming_val != 13 && incoming_val != 10 ) {
input_buffer[bufferPointer++] = incoming_val;
}
if(bufferPointer >= INPUT_BUF_LEN){
Serial.println("Big buffer overrun");
bufferPointer = 0;
input_buffer[0] = 1;
Serial.flush();
memset(input_buffer,0,sizeof(input_buffer));
return;
}
}
parseCommand(input_buffer);
// clear buffer of old data
// ------------------------
memset(input_buffer,0,sizeof(input_buffer));
}else{
Serial.flush();
}
}
}
// Commands can be sent as !!a:100|b:200|c:1
// -----------------------------------------
static void parseCommand(char *buffer)
{
Serial.println("got cmd ");
Serial.println(buffer);
char *token, *saveptr1, *saveptr2;
for (int j = 1;; j++, buffer = NULL) {
token = strtok_r(buffer, "|", &saveptr1);
if (token == NULL) break;
char * cmd = strtok_r(token, ":", &saveptr2);
long value = strtol(strtok_r (NULL,":", &saveptr2), NULL,0);
///*
Serial.print("cmd ");
Serial.print(cmd[0]);
Serial.print("\tval ");
Serial.println(value);
Serial.println("");
//*/
///*
switch(cmd[0]){
case 'P':
g.pi_stabilize_roll.kP((float)value / 1000);
g.pi_stabilize_pitch.kP((float)value / 1000);
g.pi_stabilize_pitch.save_gains();
break;
case 'I':
g.pi_stabilize_roll.kI((float)value / 1000);
g.pi_stabilize_pitch.kI((float)value / 1000);
g.pi_stabilize_pitch.save_gains();
break;
case 'D':
//g.pi_stabilize_roll.kD((float)value / 1000);
//g.pi_stabilize_pitch.kD((float)value / 1000);
break;
case 'X':
g.pi_stabilize_roll.imax(value * 100);
g.pi_stabilize_pitch.imax(value * 100);
g.pi_stabilize_pitch.save_gains();
break;
case 'R':
//g.stabilize_dampener.set_and_save((float)value / 1000);
break;
}
//*/
}
}
#endif

View File

@ -132,7 +132,7 @@ setup_factory(uint8_t argc, const Menu::arg *argv)
return(-1);
AP_Var::erase_all();
Serial.printf_P(PSTR("\nFACTORY RESET complete - reboot APM"));
Serial.printf_P(PSTR("\nReboot APM"));
delay(1000);
//default_gains();

View File

@ -83,7 +83,6 @@ static void init_ardupilot()
//
report_version();
// setup IO pins
pinMode(C_LED_PIN, OUTPUT); // GPS status LED
pinMode(A_LED_PIN, OUTPUT); // GPS status LED
@ -143,6 +142,7 @@ static void init_ardupilot()
}
}else{
// Load all auto-loaded EEPROM variables
AP_Var::load_all();
}
@ -157,7 +157,6 @@ static void init_ardupilot()
//
Serial3.begin(map_baudrate(g.serial3_baud,SERIAL3_BAUD), 128, 128);
#ifdef RADIO_OVERRIDE_DEFAULTS
{
int16_t rc_override[8] = RADIO_OVERRIDE_DEFAULTS;
@ -216,11 +215,7 @@ static void init_ardupilot()
//
if (check_startup_for_CLI()) {
digitalWrite(A_LED_PIN,HIGH); // turn on setup-mode LED
Serial.printf_P(PSTR("\n"
"Entering interactive setup mode...\n"
"\n"
"Type 'help' to list commands, 'exit' to leave a submenu.\n"
"Visit the 'setup' menu for first-time configuration.\n\n"));
Serial.printf_P(PSTR("\nCLI:\n\n"));
for (;;) {
//Serial.println_P(PSTR("\nMove the slide switch and reset to FLY.\n"));
main_menu.run();
@ -544,6 +539,6 @@ static uint32_t map_baudrate(int8_t rate, uint32_t default_baud)
case 111: return 111100;
case 115: return 115200;
}
Serial.println_P(PSTR("Invalid SERIAL3_BAUD"));
//Serial.println_P(PSTR("Invalid SERIAL3_BAUD"));
return default_baud;
}

View File

@ -29,7 +29,7 @@ static int8_t test_sonar(uint8_t argc, const Menu::arg *argv);
#ifdef OPTFLOW_ENABLED
static int8_t test_optflow(uint8_t argc, const Menu::arg *argv);
#endif
static int8_t test_xbee(uint8_t argc, const Menu::arg *argv);
//static int8_t test_xbee(uint8_t argc, const Menu::arg *argv);
static int8_t test_eedump(uint8_t argc, const Menu::arg *argv);
static int8_t test_rawgps(uint8_t argc, const Menu::arg *argv);
//static int8_t test_mission(uint8_t argc, const Menu::arg *argv);

View File

@ -0,0 +1,190 @@
%% ArduCopter.cpp
%% ArduCopter.o
In file included from /root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:55:
/usr/local/share/arduino/libraries/SPI/SPI.h:25:1: warning: "SPI_CLOCK_DIV64" redefined
/usr/local/share/arduino/libraries/SPI/SPI.h:20:1: warning: this is the location of the previous definition
In file included from /root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:77:
/root/apm/ardupilot-mega/ArduCopter/Parameters.h: In constructor 'Parameters::Parameters()':
/root/apm/ardupilot-mega/ArduCopter/Parameters.h:399: warning: overflow in implicit constant conversion
/root/apm/ardupilot-mega/ArduCopter/GCS_Mavlink.pde: In function 'bool mavlink_try_send_message(mavlink_channel_t, ap_message, uint16_t)':
/root/apm/ardupilot-mega/ArduCopter/GCS_Mavlink.pde:296: warning: enumeration value 'MSG_RAW_IMU1' not handled in switch
/root/apm/ardupilot-mega/ArduCopter/GCS_Mavlink.pde:296: warning: enumeration value 'MSG_RAW_IMU2' not handled in switch
/root/apm/ardupilot-mega/ArduCopter/GCS_Mavlink.pde:296: warning: enumeration value 'MSG_RAW_IMU3' not handled in switch
/root/apm/ardupilot-mega/ArduCopter/heli.pde: In function 'void heli_init_swash()':
/root/apm/ardupilot-mega/ArduCopter/heli.pde:60: warning: comparisons like X<=Y<=Z do not have their mathematical meaning
/root/apm/ardupilot-mega/ArduCopter/setup.pde: In function 'int8_t setup_heli(uint8_t, const Menu::arg*)':
/root/apm/ardupilot-mega/ArduCopter/setup.pde:467: warning: 'max_tail' may be used uninitialized in this function
/root/apm/ardupilot-mega/ArduCopter/setup.pde:467: warning: 'min_tail' may be used uninitialized in this function
/root/apm/ardupilot-mega/ArduCopter/setup.pde:467: warning: 'max_coll' may be used uninitialized in this function
/root/apm/ardupilot-mega/ArduCopter/setup.pde:467: warning: 'min_coll' may be used uninitialized in this function
/root/apm/ardupilot-mega/ArduCopter/setup.pde:467: warning: 'max_pitch' may be used uninitialized in this function
/root/apm/ardupilot-mega/ArduCopter/setup.pde:467: warning: 'max_roll' may be used uninitialized in this function
autogenerated: At global scope:
autogenerated:51: warning: 'void send_raw_imu1(mavlink_channel_t)' declared 'static' but never defined
autogenerated:52: warning: 'void send_raw_imu2(mavlink_channel_t)' declared 'static' but never defined
autogenerated:53: warning: 'void send_raw_imu3(mavlink_channel_t)' declared 'static' but never defined
autogenerated:105: warning: 'void Log_Write_Raw()' declared 'static' but never defined
autogenerated:109: warning: 'void Log_Write_Optflow()' declared 'static' but never defined
autogenerated:111: warning: 'void Log_Write_Control_Tuning()' declared 'static' but never defined
autogenerated:90: warning: 'void Log_Write_Attitude2()' declared 'static' but never defined
autogenerated:91: warning: 'void Log_Read_Attitude2()' declared 'static' but never defined
/root/apm/ardupilot-mega/ArduCopter/Log.pde:776: warning: 'void Log_Write_Attitude()' defined but not used
autogenerated:121: warning: 'void decrement_WP_index()' declared 'static' but never defined
/root/apm/ardupilot-mega/ArduCopter/commands.pde:132: warning: 'Location get_LOITER_home_wp()' defined but not used
/root/apm/ardupilot-mega/ArduCopter/commands_logic.pde:432: warning: 'bool verify_loiter_unlim()' defined but not used
/root/apm/ardupilot-mega/ArduCopter/events.pde:46: warning: 'void low_battery_event()' defined but not used
autogenerated:213: warning: 'void debug_motors()' declared 'static' but never defined
/root/apm/ardupilot-mega/ArduCopter/navigation.pde:183: warning: 'int get_loiter_angle()' defined but not used
autogenerated:234: warning: 'long int get_crosstrack_correction()' declared 'static' but never defined
autogenerated:235: warning: 'long int cross_track_test()' declared 'static' but never defined
autogenerated:236: warning: 'void reset_crosstrack()' declared 'static' but never defined
autogenerated:238: warning: 'long int get_alt_distance(Location*, Location*)' declared 'static' but never defined
/root/apm/ardupilot-mega/ArduCopter/radio.pde:130: warning: 'void throttle_failsafe(uint16_t)' defined but not used
autogenerated:246: warning: 'void ReadSCP1000()' declared 'static' but never defined
autogenerated:247: warning: 'void init_barometer()' declared 'static' but never defined
autogenerated:248: warning: 'long int read_baro_filtered()' declared 'static' but never defined
autogenerated:249: warning: 'long int read_barometer()' declared 'static' but never defined
autogenerated:250: warning: 'void read_airspeed()' declared 'static' but never defined
autogenerated:251: warning: 'void zero_airspeed()' declared 'static' but never defined
/root/apm/ardupilot-mega/ArduCopter/system.pde:434: warning: 'void set_failsafe(boolean)' defined but not used
autogenerated:285: warning: 'void init_optflow()' declared 'static' but never defined
autogenerated:292: warning: 'void fake_out_gps()' declared 'static' but never defined
/root/apm/ardupilot-mega/ArduCopter/test.pde:1028: warning: 'void print_motor_out()' defined but not used
/root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:277: warning: 'heli_servo_min' defined but not used
/root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:277: warning: 'heli_servo_max' defined but not used
/root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:344: warning: 'old_altitude' defined but not used
/root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:362: warning: 'abs_pressure' defined but not used
/root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:363: warning: 'ground_pressure' defined but not used
/root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:364: warning: 'ground_temperature' defined but not used
/root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:369: warning: 'baro_alt' defined but not used
/root/apm/ardupilot-mega/ArduCopter/GCS_Mavlink.pde:1706: warning: 'void gcs_send_text_fmt(const prog_char_t*, ...)' defined but not used
/root/apm/ardupilot-mega/ArduCopter/test.pde:13: warning: 'int8_t test_adc(uint8_t, const Menu::arg*)' declared 'static' but never defined
/root/apm/ardupilot-mega/ArduCopter/test.pde:26: warning: 'int8_t test_baro(uint8_t, const Menu::arg*)' declared 'static' but never defined
%% libraries/APM_BMP085/APM_BMP085.o
%% libraries/APM_BMP085/APM_BMP085_hil.o
%% libraries/APM_PI/APM_PI.o
%% libraries/APM_RC/APM_RC.o
%% libraries/AP_ADC/AP_ADC_ADS7844.o
%% libraries/AP_ADC/AP_ADC.o
%% libraries/AP_ADC/AP_ADC_HIL.o
%% libraries/AP_Common/AP_Common.o
%% libraries/AP_Common/AP_Loop.o
%% libraries/AP_Common/AP_MetaClass.o
%% libraries/AP_Common/AP_Var.o
%% libraries/AP_Common/AP_Var_menufuncs.o
%% libraries/AP_Common/c++.o
%% libraries/AP_Common/menu.o
%% libraries/AP_Compass/AP_Compass_HIL.o
%% libraries/AP_Compass/AP_Compass_HMC5843.o
%% libraries/AP_Compass/Compass.o
%% libraries/AP_DCM/AP_DCM.o
%% libraries/AP_DCM/AP_DCM_HIL.o
%% libraries/AP_GPS/AP_GPS_406.o
%% libraries/AP_GPS/AP_GPS_Auto.o
%% libraries/AP_GPS/AP_GPS_HIL.o
%% libraries/AP_GPS/AP_GPS_IMU.o
%% libraries/AP_GPS/AP_GPS_MTK16.o
%% libraries/AP_GPS/AP_GPS_MTK.o
%% libraries/AP_GPS/AP_GPS_NMEA.o
%% libraries/AP_GPS/AP_GPS_SIRF.o
%% libraries/AP_GPS/AP_GPS_UBLOX.o
%% libraries/AP_GPS/GPS.o
%% libraries/AP_IMU/AP_IMU_Oilpan.o
%% libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.o
In file included from /root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp:28:
/usr/local/share/arduino/libraries/SPI/SPI.h:25:1: warning: "SPI_CLOCK_DIV64" redefined
/usr/local/share/arduino/libraries/SPI/SPI.h:20:1: warning: this is the location of the previous definition
%% libraries/AP_OpticalFlow/AP_OpticalFlow.o
%% libraries/AP_RangeFinder/AP_RangeFinder_MaxsonarXL.o
%% libraries/AP_RangeFinder/AP_RangeFinder_SharpGP2Y.o
%% libraries/AP_RangeFinder/RangeFinder.o
%% libraries/AP_Relay/AP_Relay.o
%% libraries/DataFlash/DataFlash.o
In file included from /root/apm/ardupilot-mega/libraries/DataFlash/DataFlash.cpp:35:
/usr/local/share/arduino/libraries/SPI/SPI.h:25:1: warning: "SPI_CLOCK_DIV64" redefined
/usr/local/share/arduino/libraries/SPI/SPI.h:20:1: warning: this is the location of the previous definition
%% libraries/FastSerial/BetterStream.o
%% libraries/FastSerial/FastSerial.o
%% libraries/FastSerial/vprintf.o
%% libraries/GCS_MAVLink/GCS_MAVLink.o
%% libraries/ModeFilter/ModeFilter.o
%% libraries/RC_Channel/RC_Channel_aux.o
%% libraries/RC_Channel/RC_Channel.o
%% libraries/memcheck/memcheck.o
%% libraries/FastSerial/ftoa_engine.o
%% libraries/FastSerial/ultoa_invert.o
%% libraries/SPI/SPI.o
In file included from /usr/local/share/arduino/libraries/SPI/SPI.cpp:12:
/usr/local/share/arduino/libraries/SPI/SPI.h:25:1: warning: "SPI_CLOCK_DIV64" redefined
/usr/local/share/arduino/libraries/SPI/SPI.h:20:1: warning: this is the location of the previous definition
%% libraries/Wire/Wire.o
%% libraries/Wire/utility/twi.o
cc1: warning: command line option "-Wno-reorder" is valid for C++/ObjC++ but not for C
%% arduino/HardwareSerial.o
In file included from /usr/local/share/arduino/hardware/arduino/cores/arduino/wiring_private.h:30,
from /usr/local/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.cpp:28:
/usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/delay.h:36:2: warning: #warning "This file has been moved to <util/delay.h>."
%% arduino/main.o
%% arduino/Print.o
%% arduino/Tone.o
/usr/local/share/arduino/hardware/arduino/cores/arduino/Tone.cpp:93: warning: only initialized variables can be placed into program memory area
%% arduino/WMath.o
%% arduino/WString.o
In file included from /usr/local/share/arduino/hardware/arduino/cores/arduino/wiring_private.h:30,
from /usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:26:
/usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/delay.h:36:2: warning: #warning "This file has been moved to <util/delay.h>."
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:84: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:85: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:86: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:87: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:88: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:89: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:90: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:91: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:93: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:94: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:95: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:100: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:101: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:102: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:103: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:104: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:105: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:106: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:107: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:109: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:110: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:111: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:116: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:117: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:118: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:119: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:120: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:121: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:122: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:123: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:125: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:126: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:127: warning: initialization makes integer from pointer without a cast
In file included from /usr/local/share/arduino/hardware/arduino/cores/arduino/wiring_private.h:30,
from /usr/local/share/arduino/hardware/arduino/cores/arduino/WInterrupts.c:34:
/usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/delay.h:36:2: warning: #warning "This file has been moved to <util/delay.h>."
In file included from /usr/local/share/arduino/hardware/arduino/cores/arduino/wiring_private.h:30,
from /usr/local/share/arduino/hardware/arduino/cores/arduino/wiring_analog.c:27:
/usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/delay.h:36:2: warning: #warning "This file has been moved to <util/delay.h>."
In file included from /usr/local/share/arduino/hardware/arduino/cores/arduino/wiring_private.h:30,
from /usr/local/share/arduino/hardware/arduino/cores/arduino/wiring.c:25:
/usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/delay.h:36:2: warning: #warning "This file has been moved to <util/delay.h>."
In file included from /usr/local/share/arduino/hardware/arduino/cores/arduino/wiring_private.h:30,
from /usr/local/share/arduino/hardware/arduino/cores/arduino/wiring_digital.c:27:
/usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/delay.h:36:2: warning: #warning "This file has been moved to <util/delay.h>."
In file included from /usr/local/share/arduino/hardware/arduino/cores/arduino/wiring_private.h:30,
from /usr/local/share/arduino/hardware/arduino/cores/arduino/wiring_pulse.c:25:
/usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/delay.h:36:2: warning: #warning "This file has been moved to <util/delay.h>."
In file included from /usr/local/share/arduino/hardware/arduino/cores/arduino/wiring_private.h:30,
from /usr/local/share/arduino/hardware/arduino/cores/arduino/wiring_shift.c:25:
/usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/delay.h:36:2: warning: #warning "This file has been moved to <util/delay.h>."
%% arduino/core.a
%% ArduCopter.elf
%% ArduCopter.eep
%% ArduCopter.hex

View File

@ -0,0 +1,674 @@
00000001 b wp_control
00000001 b GPS_enabled
00000001 b home_is_set
00000001 b motor_armed
00000001 b motor_light
00000001 b control_mode
00000001 b gps_watchdog
00000001 b simple_timer
00000001 d yaw_tracking
00000001 b land_complete
00000001 b throttle_mode
00000001 b command_may_ID
00000001 b wp_verify_byte
00000001 d altitude_sensor
00000001 b command_must_ID
00000001 b command_yaw_dir
00000001 b new_radio_frame
00000001 b roll_pitch_mode
00000001 b counter_one_herz
00000001 b did_ground_start
00000001 b in_mavlink_delay
00000001 b invalid_throttle
00000001 b motor_auto_armed
00000001 b old_control_mode
00000001 b slow_loopCounter
00000001 b takeoff_complete
00000001 b command_may_index
00000001 b oldSwitchPosition
00000001 b command_must_index
00000001 d ground_start_count
00000001 b medium_loopCounter
00000001 b command_yaw_relative
00000001 d jump
00000001 b event_id
00000001 b led_mode
00000001 b yaw_mode
00000001 b GPS_light
00000001 b do_simple
00000001 b trim_flag
00000001 b dancing_light()::step
00000001 b read_control_switch()::switch_debouncer
00000001 d GCS_MAVLINK::handleMessage(__mavlink_message*)::mav_nav
00000001 B relay
00000002 T userhook_50Hz()
00000002 T userhook_init()
00000002 b climb_rate
00000002 b loiter_sum
00000002 b event_delay
00000002 b event_value
00000002 b event_repeat
00000002 b loiter_total
00000002 b nav_throttle
00000002 b x_rate_error
00000002 b y_rate_error
00000002 b altitude_rate
00000002 b gps_fix_count
00000002 b velocity_land
00000002 b x_actual_speed
00000002 b y_actual_speed
00000002 b loiter_time_max
00000002 b command_yaw_time
00000002 b event_undo_value
00000002 b command_yaw_speed
00000002 b auto_level_counter
00000002 b waypoint_speed_gov
00000002 b heli_manual_override
00000002 b heli_servo_out_count
00000002 b superslow_loopCounter
00000002 r comma
00000002 b g_gps
00000002 b airspeed
00000002 b sonar_alt
00000002 W AP_IMU_Shim::init_accel(void (*)(unsigned long))
00000002 W AP_IMU_Shim::init(IMU::Start_style, void (*)(unsigned long))
00000002 W AP_IMU_Shim::init_gyro(void (*)(unsigned long))
00000002 b arm_motors()::arming_counter
00000002 r setup_frame(unsigned char, Menu::arg const*)::__c
00000002 r setup_frame(unsigned char, Menu::arg const*)::__c
00000002 r setup_frame(unsigned char, Menu::arg const*)::__c
00000002 r setup_frame(unsigned char, Menu::arg const*)::__c
00000002 r test_wp(unsigned char, Menu::arg const*)::__c
00000002 V APM_PI::APM_PI(unsigned int, prog_char_t const*, float const&, float const&, int const&)::__c
00000002 V APM_PI::APM_PI(unsigned int, prog_char_t const*, float const&, float const&, int const&)::__c
00000003 r setup_gyro(unsigned char, Menu::arg const*)::__c
00000003 r select_logs(unsigned char, Menu::arg const*)::__c
00000003 r setup_sonar(unsigned char, Menu::arg const*)::__c
00000003 r print_enabled(unsigned char)::__c
00000003 r setup_compass(unsigned char, Menu::arg const*)::__c
00000004 d cos_roll_x
00000004 b land_start
00000004 b long_error
00000004 b sin_roll_y
00000004 d cos_pitch_x
00000004 b event_timer
00000004 b loiter_time
00000004 d scaleLongUp
00000004 b sin_pitch_y
00000004 b wp_distance
00000004 b current_amps
00000004 b gps_base_alt
00000004 b original_alt
00000004 b simple_cos_x
00000004 b simple_sin_y
00000004 b current_total
00000004 b nav_loopTimer
00000004 d scaleLongDown
00000004 t test_failsafe(unsigned char, Menu::arg const*)
00000004 b altitude_error
00000004 b fast_loopTimer
00000004 b perf_mon_timer
00000004 b target_bearing
00000004 d battery_voltage
00000004 b command_yaw_end
00000004 b condition_start
00000004 b condition_value
00000004 b target_altitude
00000004 d battery_voltage1
00000004 d battery_voltage2
00000004 d battery_voltage3
00000004 d battery_voltage4
00000004 b wp_totalDistance
00000004 b command_yaw_delta
00000004 b command_yaw_start
00000004 b fiftyhz_loopTimer
00000004 b old_target_bearing
00000004 b throttle_integrator
00000004 r __menu_name__log_menu
00000004 b command_yaw_start_time
00000004 b initial_simple_bearing
00000004 b original_target_bearing
00000004 d G_Dt
00000004 b dTnav
00000004 b nav_lat
00000004 b nav_lon
00000004 b nav_yaw
00000004 b old_alt
00000004 b auto_yaw
00000004 b nav_roll
00000004 d cos_yaw_x
00000004 b lat_error
00000004 b nav_pitch
00000004 b sin_yaw_y
00000004 b yaw_error
00000004 r setup_gyro(unsigned char, Menu::arg const*)::__c
00000004 r select_logs(unsigned char, Menu::arg const*)::__c
00000004 r select_logs(unsigned char, Menu::arg const*)::__c
00000004 r select_logs(unsigned char, Menu::arg const*)::__c
00000004 r select_logs(unsigned char, Menu::arg const*)::__c
00000004 r select_logs(unsigned char, Menu::arg const*)::__c
00000004 r setup_sonar(unsigned char, Menu::arg const*)::__c
00000004 r print_switch(unsigned char, unsigned char, bool)::__c
00000004 b mavlink_delay(unsigned long)::last_1hz
00000004 b mavlink_delay(unsigned long)::last_50hz
00000004 r print_enabled(unsigned char)::__c
00000004 r setup_compass(unsigned char, Menu::arg const*)::__c
00000004 r print_log_menu()::__c
00000004 r setup_batt_monitor(unsigned char, Menu::arg const*)::__c
00000004 V Parameters::Parameters()::__c
00000004 V RC_Channel::RC_Channel(unsigned int, prog_char_t const*)::__c
00000004 V RC_Channel::RC_Channel(unsigned int, prog_char_t const*)::__c
00000004 V RC_Channel::RC_Channel(unsigned int, prog_char_t const*)::__c
00000004 B tuning_value
00000005 r __menu_name__test_menu
00000005 r report_imu()::__c
00000005 r select_logs(unsigned char, Menu::arg const*)::__c
00000005 r select_logs(unsigned char, Menu::arg const*)::__c
00000005 r select_logs(unsigned char, Menu::arg const*)::__c
00000005 r Log_Read_Raw()::__c
00000005 r print_switch(unsigned char, unsigned char, bool)::__c
00000005 r Log_Read_Mode()::__c
00000005 r report_tuning()::__c
00000005 r print_log_menu()::__c
00000005 r print_log_menu()::__c
00000005 r print_log_menu()::__c
00000005 r print_log_menu()::__c
00000005 V Parameters::Parameters()::__c
00000005 V Parameters::Parameters()::__c
00000005 V Parameters::Parameters()::__c
00000005 V Parameters::Parameters()::__c
00000005 V Parameters::Parameters()::__c
00000005 V Parameters::Parameters()::__c
00000005 V Parameters::Parameters()::__c
00000005 V Parameters::Parameters()::__c
00000005 V Parameters::Parameters()::__c
00000005 V Parameters::Parameters()::__c
00000005 V Parameters::Parameters()::__c
00000005 V Parameters::Parameters()::__c
00000005 V Parameters::Parameters()::__c
00000005 V RC_Channel::RC_Channel(unsigned int, prog_char_t const*)::__c
00000005 r GCS_MAVLINK::GCS_MAVLINK(unsigned int)::__c
00000005 r GCS_MAVLINK::GCS_MAVLINK(unsigned int)::__c
00000005 V APM_PI::APM_PI(unsigned int, prog_char_t const*, float const&, float const&, int const&)::__c
00000006 r __menu_name__setup_menu
00000006 r report_gps()::__c
00000006 r report_heli()::__c
00000006 r test_eedump(unsigned char, Menu::arg const*)::__c
00000006 r test_eedump(unsigned char, Menu::arg const*)::__c
00000006 r zero_eeprom()::__c
00000006 r Log_Read_Mode()::__c
00000006 r print_log_menu()::__c
00000006 r print_log_menu()::__c
00000006 V Parameters::Parameters()::__c
00000007 b setup_menu
00000007 b planner_menu
00000007 b log_menu
00000007 b main_menu
00000007 b test_menu
00000007 r select_logs(unsigned char, Menu::arg const*)::__c
00000007 r select_logs(unsigned char, Menu::arg const*)::__c
00000007 r report_frame()::__c
00000007 r report_radio()::__c
00000007 r report_sonar()::__c
00000007 r print_enabled(unsigned char)::__c
00000007 r test_wp(unsigned char, Menu::arg const*)::__c
00000007 V Parameters::Parameters()::__c
00000007 V Parameters::Parameters()::__c
00000007 V Parameters::Parameters()::__c
00000007 V Parameters::Parameters()::__c
00000007 r GCS_MAVLINK::GCS_MAVLINK(unsigned int)::__c
00000007 r GCS_MAVLINK::GCS_MAVLINK(unsigned int)::__c
00000007 r GCS_MAVLINK::GCS_MAVLINK(unsigned int)::__c
00000008 t setup_erase(unsigned char, Menu::arg const*)
00000008 r __menu_name__planner_menu
00000008 r select_logs(unsigned char, Menu::arg const*)::__c
00000008 r report_tuning()::__c
00000008 r init_ardupilot()::__c
00000008 r print_log_menu()::__c
00000008 r report_batt_monitor()::__c
00000008 r report_batt_monitor()::__c
00000008 r test_wp(unsigned char, Menu::arg const*)::__c
00000008 V Parameters::Parameters()::__c
00000008 V Parameters::Parameters()::__c
00000008 V Parameters::Parameters()::__c
00000008 V Parameters::Parameters()::__c
00000008 V Parameters::Parameters()::__c
00000008 V Parameters::Parameters()::__c
00000008 V Parameters::Parameters()::__c
00000008 r GCS_MAVLINK::GCS_MAVLINK(unsigned int)::__c
00000009 r report_gyro()::__c
00000009 r print_switch(unsigned char, unsigned char, bool)::__c
00000009 r print_log_menu()::__c
00000009 r print_log_menu()::__c
00000009 r report_compass()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 r GCS_MAVLINK::GCS_MAVLINK(unsigned int)::__c
00000009 r GCS_MAVLINK::GCS_MAVLINK(unsigned int)::__c
00000009 r GCS_MAVLINK::GCS_MAVLINK(unsigned int)::__c
00000009 r GCS_MAVLINK::GCS_MAVLINK(unsigned int)::__c
0000000a T piezo_on()
0000000a T piezo_off()
0000000a r test_relay(unsigned char, Menu::arg const*)::__c
0000000a r start_new_log()::__c
0000000a r print_log_menu()::__c
0000000a r Log_Read_Startup()::__c
0000000a r test_wp(unsigned char, Menu::arg const*)::__c
0000000a V Parameters::Parameters()::__c
0000000a V Parameters::Parameters()::__c
0000000a V Parameters::Parameters()::__c
0000000a V Parameters::Parameters()::__c
0000000a V Parameters::Parameters()::__c
0000000a V Parameters::Parameters()::__c
0000000a T setup
0000000b r test_relay(unsigned char, Menu::arg const*)::__c
0000000b r report_batt_monitor()::__c
0000000b V Parameters::Parameters()::__c
0000000c t setup_accel(unsigned char, Menu::arg const*)
0000000c t process_logs(unsigned char, Menu::arg const*)
0000000c b heli_rollFactor
0000000c b heli_pitchFactor
0000000c b omega
0000000c t test_mode(unsigned char, Menu::arg const*)
0000000c T GCS_MAVLINK::send_text(gcs_severity, char const*)
0000000c V vtable for AP_IMU_Shim
0000000c V vtable for IMU
0000000c r print_switch(unsigned char, unsigned char, bool)::__c
0000000c r report_frame()::__c
0000000c r setup_factory(unsigned char, Menu::arg const*)::__c
0000000c V Parameters::Parameters()::__c
0000000c V Parameters::Parameters()::__c
0000000c V Parameters::Parameters()::__c
0000000c V Parameters::Parameters()::__c
0000000d r select_logs(unsigned char, Menu::arg const*)::__c
0000000d r test_tuning(unsigned char, Menu::arg const*)::__c
0000000d r test_battery(unsigned char, Menu::arg const*)::__c
0000000d r startup_ground()::__c
0000000d r test_wp(unsigned char, Menu::arg const*)::__c
0000000d V Parameters::Parameters()::__c
0000000d V Parameters::Parameters()::__c
0000000d V Parameters::Parameters()::__c
0000000d V Parameters::Parameters()::__c
0000000d V Parameters::Parameters()::__c
0000000d V Parameters::Parameters()::__c
0000000d V Parameters::Parameters()::__c
0000000d B sonar_mode_filter
0000000e t global destructors keyed to Serial
0000000e t global constructors keyed to Serial
0000000e t send_statustext(mavlink_channel_t)
0000000e V vtable for AP_Float16
0000000e V vtable for AP_VarS<Matrix3<float> >
0000000e V vtable for AP_VarS<Vector3<float> >
0000000e V vtable for AP_VarT<signed char>
0000000e V vtable for AP_VarT<float>
0000000e V vtable for AP_VarT<int>
0000000e r arm_motors()::__c
0000000e r erase_logs(unsigned char, Menu::arg const*)::__c
0000000e r setup_heli(unsigned char, Menu::arg const*)::__c
0000000e r setup_mode(unsigned char, Menu::arg const*)::__c
0000000e r test_sonar(unsigned char, Menu::arg const*)::__c
0000000e r select_logs(unsigned char, Menu::arg const*)::__c
0000000e r print_log_menu()::__c
0000000e r print_radio_values()::__c
0000000e r print_radio_values()::__c
0000000e r print_radio_values()::__c
0000000e r print_radio_values()::__c
0000000e r print_radio_values()::__c
0000000e r print_radio_values()::__c
0000000e r print_radio_values()::__c
0000000e r report_batt_monitor()::__c
0000000e r report_flight_modes()::__c
0000000e r dump_log(unsigned char, Menu::arg const*)::__c
0000000e V Parameters::Parameters()::__c
0000000e V Parameters::Parameters()::__c
0000000e V Parameters::Parameters()::__c
0000000e V Parameters::Parameters()::__c
0000000e V Parameters::Parameters()::__c
0000000e V Parameters::Parameters()::__c
0000000e V Parameters::Parameters()::__c
0000000e V Parameters::Parameters()::__c
0000000e V Parameters::Parameters()::__c
0000000f b current_loc
0000000f b next_command
0000000f b home
0000000f b next_WP
0000000f b prev_WP
0000000f b guided_WP
0000000f b target_WP
0000000f r report_heli()::__c
0000000f r print_log_menu()::__c
0000000f r print_log_menu()::__c
0000000f r report_version()::__c
0000000f r report_batt_monitor()::__c
0000000f r test_imu(unsigned char, Menu::arg const*)::__c
00000010 b heli_servo_out
00000010 r planner_menu_commands
00000010 b motor_out
00000010 T GCS_MAVLINK::send_message(ap_message)
00000010 W AP_VarT<float>::cast_to_float() const
00000010 r test_sonar(unsigned char, Menu::arg const*)::__c
00000010 r report_gyro()::__c
00000010 r report_heli()::__c
00000010 r report_compass()::__c
00000011 r arm_motors()::__c
00000011 r erase_logs(unsigned char, Menu::arg const*)::__c
00000011 r setup_heli(unsigned char, Menu::arg const*)::__c
00000011 r zero_eeprom()::__c
00000011 r update_commands()::__c
00000012 B Serial
00000012 B Serial1
00000012 B Serial3
00000012 t gcs_update()
00000012 t startup_ground()
00000012 r flight_mode_strings
00000012 W AP_Float16::~AP_Float16()
00000012 W AP_VarS<Matrix3<float> >::~AP_VarS()
00000012 W AP_VarS<Vector3<float> >::~AP_VarS()
00000012 W AP_VarT<signed char>::~AP_VarT()
00000012 W AP_VarT<float>::~AP_VarT()
00000012 W AP_VarT<int>::~AP_VarT()
00000012 W AP_VarT<signed char>::serialize(void*, unsigned int) const
00000012 r print_done()::__c
00000012 r setup_heli(unsigned char, Menu::arg const*)::__c
00000012 r select_logs(unsigned char, Menu::arg const*)::__c
00000012 r setup_frame(unsigned char, Menu::arg const*)::__c
00000012 r GCS_MAVLINK::handleMessage(__mavlink_message*)::__c
00000013 r setup_heli(unsigned char, Menu::arg const*)::__c
00000013 r setup_heli(unsigned char, Menu::arg const*)::__c
00000013 r setup_heli(unsigned char, Menu::arg const*)::__c
00000013 r report_heli()::__c
00000013 r report_heli()::__c
00000013 r report_heli()::__c
00000013 r report_heli()::__c
00000013 r report_heli()::__c
00000013 r setup_compass(unsigned char, Menu::arg const*)::__c
00000013 r change_command(unsigned char)::__c
00000013 r setup_batt_monitor(unsigned char, Menu::arg const*)::__c
00000014 W AP_VarT<signed char>::unserialize(void*, unsigned int)
00000014 W AP_VarT<signed char>::cast_to_float() const
00000014 W AP_VarT<int>::cast_to_float() const
00000014 r setup_heli(unsigned char, Menu::arg const*)::__c
00000014 r setup_sonar(unsigned char, Menu::arg const*)::__c
00000014 r test_tri(unsigned char, Menu::arg const*)::__c
00000015 r setup_heli(unsigned char, Menu::arg const*)::__c
00000015 r init_ardupilot()::__c
00000015 r Log_Read_Motors()::__c
00000015 r print_hit_enter()::__c
00000015 r GCS_MAVLINK::handleMessage(__mavlink_message*)::__c
00000016 T piezo_beep()
00000016 r setup_heli(unsigned char, Menu::arg const*)::__c
00000016 B adc
00000016 B sonar
00000018 t setup_tune(unsigned char, Menu::arg const*)
00000018 r __menu_name__main_menu
00000018 W AP_VarT<int>::serialize(void*, unsigned int) const
00000019 r setup_gyro(unsigned char, Menu::arg const*)::__c
0000001a r print_log_menu()::__c
0000001a r Log_Read_Nav_Tuning()::__c
0000001b r setup_heli(unsigned char, Menu::arg const*)::__c
0000001b r report_heli()::__c
0000001c W AP_VarS<Matrix3<float> >::unserialize(void*, unsigned int)
0000001c W AP_VarS<Vector3<float> >::unserialize(void*, unsigned int)
0000001c W AP_VarT<int>::unserialize(void*, unsigned int)
0000001c W AP_VarS<Matrix3<float> >::serialize(void*, unsigned int) const
0000001c W AP_VarS<Vector3<float> >::serialize(void*, unsigned int) const
0000001d r Log_Read_Attitude()::__c
0000001e r report_heli()::__c
0000001e r Log_Read_Optflow()::__c
00000020 t gcs_send_message(ap_message)
00000020 r test_current(unsigned char, Menu::arg const*)::__c
00000020 t byte_swap_4
00000021 r setup_heli(unsigned char, Menu::arg const*)::__c
00000021 r print_log_menu()::__c
00000021 r report_compass()::__c
00000021 r Log_Read_Current()::__c
00000021 r Log_Read_Performance()::__c
00000022 t clear_leds()
00000022 t print_blanks(int)
00000022 t reset_hold_I()
00000022 W AP_Float16::~AP_Float16()
00000022 W AP_VarS<Matrix3<float> >::~AP_VarS()
00000022 W AP_VarS<Vector3<float> >::~AP_VarS()
00000022 W AP_VarT<signed char>::~AP_VarT()
00000022 W AP_VarT<float>::~AP_VarT()
00000022 W AP_VarT<int>::~AP_VarT()
00000023 r setup_heli(unsigned char, Menu::arg const*)::__c
00000023 r setup_mode(unsigned char, Menu::arg const*)::__c
00000023 r print_gyro_offsets()::__c
00000024 r setup_heli(unsigned char, Menu::arg const*)::__c
00000024 r init_ardupilot()::__c
00000024 r print_accel_offsets()::__c
00000026 t print_done()
00000026 t print_hit_enter()
00000026 t Log_Read_Startup()
00000026 r Log_Read_Control_Tuning()::__c
00000028 t test_battery(unsigned char, Menu::arg const*)
00000028 t main_menu_help(unsigned char, Menu::arg const*)
00000028 t help_log(unsigned char, Menu::arg const*)
00000028 W AP_VarT<float>::unserialize(void*, unsigned int)
00000028 W AP_VarT<float>::serialize(void*, unsigned int) const
00000028 r Log_Read_Cmd()::__c
00000029 r setup_heli(unsigned char, Menu::arg const*)::__c
00000029 r setup_mode(unsigned char, Menu::arg const*)::__c
00000029 r test_gps(unsigned char, Menu::arg const*)::__c
0000002a t setup_declination(unsigned char, Menu::arg const*)
0000002b r planner_mode(unsigned char, Menu::arg const*)::__c
0000002e t setup_motors(unsigned char, Menu::arg const*)
0000002e t print_divider()
0000002e t gcs_send_text_P(gcs_severity, prog_char_t const*)
0000002e t gcs_data_stream_send(unsigned int, unsigned int)
0000002e W AP_Var_group::AP_Var_group(unsigned int, prog_char_t const*, unsigned char)
0000002f r test_radio(unsigned char, Menu::arg const*)::__c
0000002f r init_ardupilot()::__c
00000030 t planner_mode(unsigned char, Menu::arg const*)
00000030 t send_heartbeat(mavlink_channel_t)
00000030 B imu
00000031 r setup_heli(unsigned char, Menu::arg const*)::__c
00000032 T GCS_MAVLINK::init(FastSerial*)
00000032 W APM_PI::~APM_PI()
00000032 r setup_heli(unsigned char, Menu::arg const*)::__c
00000032 r Log_Read_GPS()::__c
00000033 b pending_status
00000034 t _MAV_RETURN_float
00000034 t heli_get_servo(int)
00000034 W AP_Float16::serialize(void*, unsigned int) const
00000034 t _mav_put_int8_t_array
00000034 t mavlink_msg_statustext_send
00000035 r test_radio_pwm(unsigned char, Menu::arg const*)::__c
00000036 t report_radio()
00000037 r print_wp(Location*, unsigned char)::__c
00000038 t init_throttle_cruise()
00000038 t send_current_waypoint(mavlink_channel_t)
00000038 r setup_radio(unsigned char, Menu::arg const*)::__c
00000038 r setup_factory(unsigned char, Menu::arg const*)::__c
0000003a t report_gps()
0000003a t report_imu()
0000003a B g_gps_driver
0000003c W RC_Channel::~RC_Channel()
0000003e T GCS_MAVLINK::send_text(gcs_severity, prog_char_t const*)
0000003e W AP_VarT<signed char>::AP_VarT(signed char, unsigned int, prog_char_t const*, unsigned char)
00000040 W AP_Float16::unserialize(void*, unsigned int)
00000040 t byte_swap_8
00000042 T output_min()
00000042 t report_sonar()
00000042 r setup_heli(unsigned char, Menu::arg const*)::__c
00000044 W AP_VarT<int>::AP_VarT(int, unsigned int, prog_char_t const*, unsigned char)
00000048 t change_command(unsigned char)
00000048 t update_motor_leds()
00000049 r setup_flightmodes(unsigned char, Menu::arg const*)::__c
0000004a t send_meminfo(mavlink_channel_t)
0000004a W AP_VarT<int>::AP_VarT(AP_Var_group*, unsigned int, int, prog_char_t const*, unsigned char)
0000004c t setup_show(unsigned char, Menu::arg const*)
0000004c t update_auto_yaw()
00000050 b mavlink_queue
00000050 r log_menu_commands
00000050 r main_menu_commands
00000050 T GCS_MAVLINK::_find_parameter(unsigned int)
00000052 t report_version()
00000052 W AP_IMU_Shim::update()
00000054 t print_enabled(unsigned char)
00000055 r main_menu_help(unsigned char, Menu::arg const*)::__c
00000056 t readSwitch()
00000056 t dancing_light()
00000056 T GCS_MAVLINK::queued_waypoint_send()
00000057 r help_log(unsigned char, Menu::arg const*)::__c
00000057 B dcm
0000005a t report_frame()
0000005a W AP_VarT<float>::AP_VarT(float, unsigned int, prog_char_t const*, unsigned char)
0000005c t get_num_logs()
0000005c t setup_esc(unsigned char, Menu::arg const*)
0000005e t update_GPS_light()
0000005e T GCS_MAVLINK::_count_parameters()
0000005f r setup_heli(unsigned char, Menu::arg const*)::__c
00000064 t print_gyro_offsets()
00000064 t print_accel_offsets()
00000064 t mavlink_msg_param_value_send
00000068 t zero_eeprom()
00000068 t find_last_log_page(int)
0000006a T mavlink_send_text(mavlink_channel_t, gcs_severity, char const*)
0000006a t read_num_from_serial()
0000006a W GCS_MAVLINK::~GCS_MAVLINK()
0000006c t setup_sonar(unsigned char, Menu::arg const*)
00000074 t output_motors_armed()
00000078 t setup_batt_monitor(unsigned char, Menu::arg const*)
00000078 t do_RTL()
0000007a t setup_factory(unsigned char, Menu::arg const*)
0000007a t read_control_switch()
0000007a t report_flight_modes()
0000007c t send_gps_status(mavlink_channel_t)
0000007e t test_rawgps(unsigned char, Menu::arg const*)
00000080 T __vector_25
00000080 T __vector_36
00000080 T __vector_54
00000088 t Log_Read_Raw()
0000008c t setup_frame(unsigned char, Menu::arg const*)
00000090 t init_compass()
00000090 t dump_log(unsigned char, Menu::arg const*)
00000092 t report_gyro()
00000092 t test_tuning(unsigned char, Menu::arg const*)
00000092 t report_tuning()
00000092 T GCS_MAVLINK::queued_param_send()
00000096 t print_wp(Location*, unsigned char)
0000009a t planner_gcs(unsigned char, Menu::arg const*)
0000009a t Log_Read_Motors()
0000009b B gcs0
0000009b B gcs3
0000009e t setup_mode(unsigned char, Menu::arg const*)
0000009e t Log_Write_Cmd(unsigned char, Location*)
000000a0 t Log_Read_Mode()
000000a4 T __vector_26
000000a4 T __vector_37
000000a4 T __vector_55
000000a6 t send_servo_out(mavlink_channel_t)
000000aa t test_sonar(unsigned char, Menu::arg const*)
000000aa t Log_Read_Nav_Tuning()
000000ab B compass
000000b0 t test_relay(unsigned char, Menu::arg const*)
000000b2 t erase_logs(unsigned char, Menu::arg const*)
000000b4 t read_radio()
000000b6 t get_log_boundaries(unsigned char, int&, int&)
000000be t update_events()
000000c2 t setup_compass(unsigned char, Menu::arg const*)
000000c2 t send_radio_out(mavlink_channel_t)
000000c2 t Log_Read_Attitude()
000000c4 t get_distance(Location*, Location*)
000000c4 r setup_esc(unsigned char, Menu::arg const*)::__c
000000c6 t test_eedump(unsigned char, Menu::arg const*)
000000c6 t send_radio_in(mavlink_channel_t)
000000c6 t Log_Read_Performance()
000000c6 t test_tri(unsigned char, Menu::arg const*)
000000d0 t get_bearing(Location*, Location*)
000000d2 t print_switch(unsigned char, unsigned char, bool)
000000d4 t get_stabilize_roll(long)
000000d4 t get_stabilize_pitch(long)
000000d4 t Log_Read(int, int)
000000d8 t test_radio(unsigned char, Menu::arg const*)
000000e0 r test_menu_commands
000000e4 t test_radio_pwm(unsigned char, Menu::arg const*)
000000e4 t Log_Read_Optflow()
000000e4 W APM_PI::APM_PI(unsigned int, prog_char_t const*, float const&, float const&, int const&)
000000e8 t Log_Read_Current()
000000ea t Log_Read_Control_Tuning()
000000ee t report_batt_monitor()
000000f6 t Log_Read_Cmd()
00000100 r setup_menu_commands
00000106 t setup_gyro(unsigned char, Menu::arg const*)
0000010a t mavlink_delay(unsigned long)
0000010a t test_gps(unsigned char, Menu::arg const*)
0000010c t test_current(unsigned char, Menu::arg const*)
0000010e W RC_Channel::RC_Channel(unsigned int, prog_char_t const*)
00000112 t set_next_WP(Location*)
00000112 t send_extended_status1(mavlink_channel_t, unsigned int)
00000112 T GCS_MAVLINK::GCS_MAVLINK(unsigned int)
00000112 T GCS_MAVLINK::GCS_MAVLINK(unsigned int)
00000118 t set_command_with_index(Location, int)
0000011c t get_command_with_index(int)
0000012c t calc_loiter_pitch_roll()
0000012e t arm_motors()
00000130 t report_compass()
00000148 t Log_Read_GPS()
00000156 t update_commands()
0000015c t update_trig()
00000160 t send_location(mavlink_channel_t)
00000160 t send_nav_controller_output(mavlink_channel_t)
00000166 t select_logs(unsigned char, Menu::arg const*)
00000166 t send_vfr_hud(mavlink_channel_t)
00000168 T GCS_MAVLINK::update()
0000016e t send_attitude(mavlink_channel_t)
00000174 t mavlink_send_message(mavlink_channel_t, ap_message, unsigned int)
00000178 t mavlink_try_send_message(mavlink_channel_t, ap_message, unsigned int)
00000184 t test_imu(unsigned char, Menu::arg const*)
00000188 T GCS_MAVLINK::data_stream_send(unsigned int, unsigned int)
000001a8 t print_radio_values()
000001cc t start_new_log()
000001e4 t setup_flightmodes(unsigned char, Menu::arg const*)
000001e6 t verify_nav_wp()
000001ea t init_home()
00000216 t set_mode(unsigned char)
00000220 t test_wp(unsigned char, Menu::arg const*)
00000228 t setup_radio(unsigned char, Menu::arg const*)
0000022a t send_gps_raw(mavlink_channel_t)
00000242 t calc_loiter(int, int)
0000030c t heli_init_swash()
00000312 W Parameters::~Parameters()
0000032a t report_heli()
00000330 t tuning()
00000384 t print_log_menu()
0000039a T update_throttle_mode()
0000039c t __static_initialization_and_destruction_0(int, int)
000003a0 t read_battery()
0000045c T update_yaw_mode()
0000046e T update_roll_pitch_mode()
0000052e t heli_move_swash(int, int, int, int)
00000622 t init_ardupilot()
0000071a t update_nav_wp()
000007ec t setup_heli(unsigned char, Menu::arg const*)
00000870 t process_next_command()
000009b4 W Parameters::Parameters()
00000a1f b g
00000ffc T loop
00001604 T GCS_MAVLINK::handleMessage(__mavlink_message*)

View File

@ -0,0 +1,190 @@
%% ArduCopter.cpp
%% ArduCopter.o
In file included from /root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:55:
/usr/local/share/arduino/libraries/SPI/SPI.h:25:1: warning: "SPI_CLOCK_DIV64" redefined
/usr/local/share/arduino/libraries/SPI/SPI.h:20:1: warning: this is the location of the previous definition
In file included from /root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:77:
/root/apm/ardupilot-mega/ArduCopter/Parameters.h: In constructor 'Parameters::Parameters()':
/root/apm/ardupilot-mega/ArduCopter/Parameters.h:399: warning: overflow in implicit constant conversion
/root/apm/ardupilot-mega/ArduCopter/GCS_Mavlink.pde: In function 'bool mavlink_try_send_message(mavlink_channel_t, ap_message, uint16_t)':
/root/apm/ardupilot-mega/ArduCopter/GCS_Mavlink.pde:296: warning: enumeration value 'MSG_RAW_IMU1' not handled in switch
/root/apm/ardupilot-mega/ArduCopter/GCS_Mavlink.pde:296: warning: enumeration value 'MSG_RAW_IMU2' not handled in switch
/root/apm/ardupilot-mega/ArduCopter/GCS_Mavlink.pde:296: warning: enumeration value 'MSG_RAW_IMU3' not handled in switch
/root/apm/ardupilot-mega/ArduCopter/heli.pde: In function 'void heli_init_swash()':
/root/apm/ardupilot-mega/ArduCopter/heli.pde:60: warning: comparisons like X<=Y<=Z do not have their mathematical meaning
/root/apm/ardupilot-mega/ArduCopter/setup.pde: In function 'int8_t setup_heli(uint8_t, const Menu::arg*)':
/root/apm/ardupilot-mega/ArduCopter/setup.pde:467: warning: 'max_tail' may be used uninitialized in this function
/root/apm/ardupilot-mega/ArduCopter/setup.pde:467: warning: 'min_tail' may be used uninitialized in this function
/root/apm/ardupilot-mega/ArduCopter/setup.pde:467: warning: 'max_coll' may be used uninitialized in this function
/root/apm/ardupilot-mega/ArduCopter/setup.pde:467: warning: 'min_coll' may be used uninitialized in this function
/root/apm/ardupilot-mega/ArduCopter/setup.pde:467: warning: 'max_pitch' may be used uninitialized in this function
/root/apm/ardupilot-mega/ArduCopter/setup.pde:467: warning: 'max_roll' may be used uninitialized in this function
autogenerated: At global scope:
autogenerated:51: warning: 'void send_raw_imu1(mavlink_channel_t)' declared 'static' but never defined
autogenerated:52: warning: 'void send_raw_imu2(mavlink_channel_t)' declared 'static' but never defined
autogenerated:53: warning: 'void send_raw_imu3(mavlink_channel_t)' declared 'static' but never defined
autogenerated:105: warning: 'void Log_Write_Raw()' declared 'static' but never defined
autogenerated:109: warning: 'void Log_Write_Optflow()' declared 'static' but never defined
autogenerated:111: warning: 'void Log_Write_Control_Tuning()' declared 'static' but never defined
autogenerated:90: warning: 'void Log_Write_Attitude2()' declared 'static' but never defined
autogenerated:91: warning: 'void Log_Read_Attitude2()' declared 'static' but never defined
/root/apm/ardupilot-mega/ArduCopter/Log.pde:776: warning: 'void Log_Write_Attitude()' defined but not used
autogenerated:121: warning: 'void decrement_WP_index()' declared 'static' but never defined
/root/apm/ardupilot-mega/ArduCopter/commands.pde:132: warning: 'Location get_LOITER_home_wp()' defined but not used
/root/apm/ardupilot-mega/ArduCopter/commands_logic.pde:432: warning: 'bool verify_loiter_unlim()' defined but not used
/root/apm/ardupilot-mega/ArduCopter/events.pde:46: warning: 'void low_battery_event()' defined but not used
autogenerated:213: warning: 'void debug_motors()' declared 'static' but never defined
/root/apm/ardupilot-mega/ArduCopter/navigation.pde:183: warning: 'int get_loiter_angle()' defined but not used
autogenerated:234: warning: 'long int get_crosstrack_correction()' declared 'static' but never defined
autogenerated:235: warning: 'long int cross_track_test()' declared 'static' but never defined
autogenerated:236: warning: 'void reset_crosstrack()' declared 'static' but never defined
autogenerated:238: warning: 'long int get_alt_distance(Location*, Location*)' declared 'static' but never defined
/root/apm/ardupilot-mega/ArduCopter/radio.pde:130: warning: 'void throttle_failsafe(uint16_t)' defined but not used
autogenerated:246: warning: 'void ReadSCP1000()' declared 'static' but never defined
autogenerated:247: warning: 'void init_barometer()' declared 'static' but never defined
autogenerated:248: warning: 'long int read_baro_filtered()' declared 'static' but never defined
autogenerated:249: warning: 'long int read_barometer()' declared 'static' but never defined
autogenerated:250: warning: 'void read_airspeed()' declared 'static' but never defined
autogenerated:251: warning: 'void zero_airspeed()' declared 'static' but never defined
/root/apm/ardupilot-mega/ArduCopter/system.pde:434: warning: 'void set_failsafe(boolean)' defined but not used
autogenerated:285: warning: 'void init_optflow()' declared 'static' but never defined
autogenerated:292: warning: 'void fake_out_gps()' declared 'static' but never defined
/root/apm/ardupilot-mega/ArduCopter/test.pde:1028: warning: 'void print_motor_out()' defined but not used
/root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:277: warning: 'heli_servo_min' defined but not used
/root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:277: warning: 'heli_servo_max' defined but not used
/root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:344: warning: 'old_altitude' defined but not used
/root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:362: warning: 'abs_pressure' defined but not used
/root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:363: warning: 'ground_pressure' defined but not used
/root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:364: warning: 'ground_temperature' defined but not used
/root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:369: warning: 'baro_alt' defined but not used
/root/apm/ardupilot-mega/ArduCopter/GCS_Mavlink.pde:1706: warning: 'void gcs_send_text_fmt(const prog_char_t*, ...)' defined but not used
/root/apm/ardupilot-mega/ArduCopter/test.pde:13: warning: 'int8_t test_adc(uint8_t, const Menu::arg*)' declared 'static' but never defined
/root/apm/ardupilot-mega/ArduCopter/test.pde:26: warning: 'int8_t test_baro(uint8_t, const Menu::arg*)' declared 'static' but never defined
%% libraries/APM_BMP085/APM_BMP085.o
%% libraries/APM_BMP085/APM_BMP085_hil.o
%% libraries/APM_PI/APM_PI.o
%% libraries/APM_RC/APM_RC.o
%% libraries/AP_ADC/AP_ADC_ADS7844.o
%% libraries/AP_ADC/AP_ADC.o
%% libraries/AP_ADC/AP_ADC_HIL.o
%% libraries/AP_Common/AP_Common.o
%% libraries/AP_Common/AP_Loop.o
%% libraries/AP_Common/AP_MetaClass.o
%% libraries/AP_Common/AP_Var.o
%% libraries/AP_Common/AP_Var_menufuncs.o
%% libraries/AP_Common/c++.o
%% libraries/AP_Common/menu.o
%% libraries/AP_Compass/AP_Compass_HIL.o
%% libraries/AP_Compass/AP_Compass_HMC5843.o
%% libraries/AP_Compass/Compass.o
%% libraries/AP_DCM/AP_DCM.o
%% libraries/AP_DCM/AP_DCM_HIL.o
%% libraries/AP_GPS/AP_GPS_406.o
%% libraries/AP_GPS/AP_GPS_Auto.o
%% libraries/AP_GPS/AP_GPS_HIL.o
%% libraries/AP_GPS/AP_GPS_IMU.o
%% libraries/AP_GPS/AP_GPS_MTK16.o
%% libraries/AP_GPS/AP_GPS_MTK.o
%% libraries/AP_GPS/AP_GPS_NMEA.o
%% libraries/AP_GPS/AP_GPS_SIRF.o
%% libraries/AP_GPS/AP_GPS_UBLOX.o
%% libraries/AP_GPS/GPS.o
%% libraries/AP_IMU/AP_IMU_Oilpan.o
%% libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.o
In file included from /root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp:28:
/usr/local/share/arduino/libraries/SPI/SPI.h:25:1: warning: "SPI_CLOCK_DIV64" redefined
/usr/local/share/arduino/libraries/SPI/SPI.h:20:1: warning: this is the location of the previous definition
%% libraries/AP_OpticalFlow/AP_OpticalFlow.o
%% libraries/AP_RangeFinder/AP_RangeFinder_MaxsonarXL.o
%% libraries/AP_RangeFinder/AP_RangeFinder_SharpGP2Y.o
%% libraries/AP_RangeFinder/RangeFinder.o
%% libraries/AP_Relay/AP_Relay.o
%% libraries/DataFlash/DataFlash.o
In file included from /root/apm/ardupilot-mega/libraries/DataFlash/DataFlash.cpp:35:
/usr/local/share/arduino/libraries/SPI/SPI.h:25:1: warning: "SPI_CLOCK_DIV64" redefined
/usr/local/share/arduino/libraries/SPI/SPI.h:20:1: warning: this is the location of the previous definition
%% libraries/FastSerial/BetterStream.o
%% libraries/FastSerial/FastSerial.o
%% libraries/FastSerial/vprintf.o
%% libraries/GCS_MAVLink/GCS_MAVLink.o
%% libraries/ModeFilter/ModeFilter.o
%% libraries/RC_Channel/RC_Channel_aux.o
%% libraries/RC_Channel/RC_Channel.o
%% libraries/memcheck/memcheck.o
%% libraries/FastSerial/ftoa_engine.o
%% libraries/FastSerial/ultoa_invert.o
%% libraries/SPI/SPI.o
In file included from /usr/local/share/arduino/libraries/SPI/SPI.cpp:12:
/usr/local/share/arduino/libraries/SPI/SPI.h:25:1: warning: "SPI_CLOCK_DIV64" redefined
/usr/local/share/arduino/libraries/SPI/SPI.h:20:1: warning: this is the location of the previous definition
%% libraries/Wire/Wire.o
%% libraries/Wire/utility/twi.o
cc1: warning: command line option "-Wno-reorder" is valid for C++/ObjC++ but not for C
%% arduino/HardwareSerial.o
In file included from /usr/local/share/arduino/hardware/arduino/cores/arduino/wiring_private.h:30,
from /usr/local/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.cpp:28:
/usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/delay.h:36:2: warning: #warning "This file has been moved to <util/delay.h>."
%% arduino/main.o
%% arduino/Print.o
%% arduino/Tone.o
/usr/local/share/arduino/hardware/arduino/cores/arduino/Tone.cpp:93: warning: only initialized variables can be placed into program memory area
%% arduino/WMath.o
%% arduino/WString.o
In file included from /usr/local/share/arduino/hardware/arduino/cores/arduino/wiring_private.h:30,
from /usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:26:
/usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/delay.h:36:2: warning: #warning "This file has been moved to <util/delay.h>."
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:84: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:85: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:86: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:87: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:88: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:89: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:90: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:91: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:93: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:94: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:95: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:100: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:101: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:102: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:103: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:104: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:105: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:106: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:107: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:109: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:110: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:111: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:116: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:117: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:118: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:119: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:120: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:121: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:122: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:123: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:125: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:126: warning: initialization makes integer from pointer without a cast
/usr/local/share/arduino/hardware/arduino/cores/arduino/pins_arduino.c:127: warning: initialization makes integer from pointer without a cast
In file included from /usr/local/share/arduino/hardware/arduino/cores/arduino/wiring_private.h:30,
from /usr/local/share/arduino/hardware/arduino/cores/arduino/WInterrupts.c:34:
/usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/delay.h:36:2: warning: #warning "This file has been moved to <util/delay.h>."
In file included from /usr/local/share/arduino/hardware/arduino/cores/arduino/wiring_private.h:30,
from /usr/local/share/arduino/hardware/arduino/cores/arduino/wiring_analog.c:27:
/usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/delay.h:36:2: warning: #warning "This file has been moved to <util/delay.h>."
In file included from /usr/local/share/arduino/hardware/arduino/cores/arduino/wiring_private.h:30,
from /usr/local/share/arduino/hardware/arduino/cores/arduino/wiring.c:25:
/usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/delay.h:36:2: warning: #warning "This file has been moved to <util/delay.h>."
In file included from /usr/local/share/arduino/hardware/arduino/cores/arduino/wiring_private.h:30,
from /usr/local/share/arduino/hardware/arduino/cores/arduino/wiring_digital.c:27:
/usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/delay.h:36:2: warning: #warning "This file has been moved to <util/delay.h>."
In file included from /usr/local/share/arduino/hardware/arduino/cores/arduino/wiring_private.h:30,
from /usr/local/share/arduino/hardware/arduino/cores/arduino/wiring_pulse.c:25:
/usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/delay.h:36:2: warning: #warning "This file has been moved to <util/delay.h>."
In file included from /usr/local/share/arduino/hardware/arduino/cores/arduino/wiring_private.h:30,
from /usr/local/share/arduino/hardware/arduino/cores/arduino/wiring_shift.c:25:
/usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/delay.h:36:2: warning: #warning "This file has been moved to <util/delay.h>."
%% arduino/core.a
%% ArduCopter.elf
%% ArduCopter.eep
%% ArduCopter.hex

View File

@ -0,0 +1,674 @@
00000001 b wp_control
00000001 b GPS_enabled
00000001 b home_is_set
00000001 b motor_armed
00000001 b motor_light
00000001 b control_mode
00000001 b gps_watchdog
00000001 b simple_timer
00000001 d yaw_tracking
00000001 b land_complete
00000001 b throttle_mode
00000001 b command_may_ID
00000001 b wp_verify_byte
00000001 d altitude_sensor
00000001 b command_must_ID
00000001 b command_yaw_dir
00000001 b new_radio_frame
00000001 b roll_pitch_mode
00000001 b counter_one_herz
00000001 b did_ground_start
00000001 b in_mavlink_delay
00000001 b invalid_throttle
00000001 b motor_auto_armed
00000001 b old_control_mode
00000001 b slow_loopCounter
00000001 b takeoff_complete
00000001 b command_may_index
00000001 b oldSwitchPosition
00000001 b command_must_index
00000001 d ground_start_count
00000001 b medium_loopCounter
00000001 b command_yaw_relative
00000001 d jump
00000001 b event_id
00000001 b led_mode
00000001 b yaw_mode
00000001 b GPS_light
00000001 b do_simple
00000001 b trim_flag
00000001 b dancing_light()::step
00000001 b read_control_switch()::switch_debouncer
00000001 d GCS_MAVLINK::handleMessage(__mavlink_message*)::mav_nav
00000001 B relay
00000002 T userhook_50Hz()
00000002 T userhook_init()
00000002 b climb_rate
00000002 b loiter_sum
00000002 b event_delay
00000002 b event_value
00000002 b event_repeat
00000002 b loiter_total
00000002 b nav_throttle
00000002 b x_rate_error
00000002 b y_rate_error
00000002 b altitude_rate
00000002 b gps_fix_count
00000002 b velocity_land
00000002 b x_actual_speed
00000002 b y_actual_speed
00000002 b loiter_time_max
00000002 b command_yaw_time
00000002 b event_undo_value
00000002 b command_yaw_speed
00000002 b auto_level_counter
00000002 b waypoint_speed_gov
00000002 b heli_manual_override
00000002 b heli_servo_out_count
00000002 b superslow_loopCounter
00000002 r comma
00000002 b g_gps
00000002 b airspeed
00000002 b sonar_alt
00000002 W AP_IMU_Shim::init_accel(void (*)(unsigned long))
00000002 W AP_IMU_Shim::init(IMU::Start_style, void (*)(unsigned long))
00000002 W AP_IMU_Shim::init_gyro(void (*)(unsigned long))
00000002 b arm_motors()::arming_counter
00000002 r setup_frame(unsigned char, Menu::arg const*)::__c
00000002 r setup_frame(unsigned char, Menu::arg const*)::__c
00000002 r setup_frame(unsigned char, Menu::arg const*)::__c
00000002 r setup_frame(unsigned char, Menu::arg const*)::__c
00000002 r test_wp(unsigned char, Menu::arg const*)::__c
00000002 V APM_PI::APM_PI(unsigned int, prog_char_t const*, float const&, float const&, int const&)::__c
00000002 V APM_PI::APM_PI(unsigned int, prog_char_t const*, float const&, float const&, int const&)::__c
00000003 r setup_gyro(unsigned char, Menu::arg const*)::__c
00000003 r select_logs(unsigned char, Menu::arg const*)::__c
00000003 r setup_sonar(unsigned char, Menu::arg const*)::__c
00000003 r print_enabled(unsigned char)::__c
00000003 r setup_compass(unsigned char, Menu::arg const*)::__c
00000004 d cos_roll_x
00000004 b land_start
00000004 b long_error
00000004 b sin_roll_y
00000004 d cos_pitch_x
00000004 b event_timer
00000004 b loiter_time
00000004 d scaleLongUp
00000004 b sin_pitch_y
00000004 b wp_distance
00000004 b current_amps
00000004 b gps_base_alt
00000004 b original_alt
00000004 b simple_cos_x
00000004 b simple_sin_y
00000004 b current_total
00000004 b nav_loopTimer
00000004 d scaleLongDown
00000004 t test_failsafe(unsigned char, Menu::arg const*)
00000004 b altitude_error
00000004 b fast_loopTimer
00000004 b perf_mon_timer
00000004 b target_bearing
00000004 d battery_voltage
00000004 b command_yaw_end
00000004 b condition_start
00000004 b condition_value
00000004 b target_altitude
00000004 d battery_voltage1
00000004 d battery_voltage2
00000004 d battery_voltage3
00000004 d battery_voltage4
00000004 b wp_totalDistance
00000004 b command_yaw_delta
00000004 b command_yaw_start
00000004 b fiftyhz_loopTimer
00000004 b old_target_bearing
00000004 b throttle_integrator
00000004 r __menu_name__log_menu
00000004 b command_yaw_start_time
00000004 b initial_simple_bearing
00000004 b original_target_bearing
00000004 d G_Dt
00000004 b dTnav
00000004 b nav_lat
00000004 b nav_lon
00000004 b nav_yaw
00000004 b old_alt
00000004 b auto_yaw
00000004 b nav_roll
00000004 d cos_yaw_x
00000004 b lat_error
00000004 b nav_pitch
00000004 b sin_yaw_y
00000004 b yaw_error
00000004 r setup_gyro(unsigned char, Menu::arg const*)::__c
00000004 r select_logs(unsigned char, Menu::arg const*)::__c
00000004 r select_logs(unsigned char, Menu::arg const*)::__c
00000004 r select_logs(unsigned char, Menu::arg const*)::__c
00000004 r select_logs(unsigned char, Menu::arg const*)::__c
00000004 r select_logs(unsigned char, Menu::arg const*)::__c
00000004 r setup_sonar(unsigned char, Menu::arg const*)::__c
00000004 r print_switch(unsigned char, unsigned char, bool)::__c
00000004 b mavlink_delay(unsigned long)::last_1hz
00000004 b mavlink_delay(unsigned long)::last_50hz
00000004 r print_enabled(unsigned char)::__c
00000004 r setup_compass(unsigned char, Menu::arg const*)::__c
00000004 r print_log_menu()::__c
00000004 r setup_batt_monitor(unsigned char, Menu::arg const*)::__c
00000004 V Parameters::Parameters()::__c
00000004 V RC_Channel::RC_Channel(unsigned int, prog_char_t const*)::__c
00000004 V RC_Channel::RC_Channel(unsigned int, prog_char_t const*)::__c
00000004 V RC_Channel::RC_Channel(unsigned int, prog_char_t const*)::__c
00000004 B tuning_value
00000005 r __menu_name__test_menu
00000005 r report_imu()::__c
00000005 r select_logs(unsigned char, Menu::arg const*)::__c
00000005 r select_logs(unsigned char, Menu::arg const*)::__c
00000005 r select_logs(unsigned char, Menu::arg const*)::__c
00000005 r Log_Read_Raw()::__c
00000005 r print_switch(unsigned char, unsigned char, bool)::__c
00000005 r Log_Read_Mode()::__c
00000005 r report_tuning()::__c
00000005 r print_log_menu()::__c
00000005 r print_log_menu()::__c
00000005 r print_log_menu()::__c
00000005 r print_log_menu()::__c
00000005 V Parameters::Parameters()::__c
00000005 V Parameters::Parameters()::__c
00000005 V Parameters::Parameters()::__c
00000005 V Parameters::Parameters()::__c
00000005 V Parameters::Parameters()::__c
00000005 V Parameters::Parameters()::__c
00000005 V Parameters::Parameters()::__c
00000005 V Parameters::Parameters()::__c
00000005 V Parameters::Parameters()::__c
00000005 V Parameters::Parameters()::__c
00000005 V Parameters::Parameters()::__c
00000005 V Parameters::Parameters()::__c
00000005 V Parameters::Parameters()::__c
00000005 V RC_Channel::RC_Channel(unsigned int, prog_char_t const*)::__c
00000005 r GCS_MAVLINK::GCS_MAVLINK(unsigned int)::__c
00000005 r GCS_MAVLINK::GCS_MAVLINK(unsigned int)::__c
00000005 V APM_PI::APM_PI(unsigned int, prog_char_t const*, float const&, float const&, int const&)::__c
00000006 r __menu_name__setup_menu
00000006 r report_gps()::__c
00000006 r report_heli()::__c
00000006 r test_eedump(unsigned char, Menu::arg const*)::__c
00000006 r test_eedump(unsigned char, Menu::arg const*)::__c
00000006 r zero_eeprom()::__c
00000006 r Log_Read_Mode()::__c
00000006 r print_log_menu()::__c
00000006 r print_log_menu()::__c
00000006 V Parameters::Parameters()::__c
00000007 b setup_menu
00000007 b planner_menu
00000007 b log_menu
00000007 b main_menu
00000007 b test_menu
00000007 r select_logs(unsigned char, Menu::arg const*)::__c
00000007 r select_logs(unsigned char, Menu::arg const*)::__c
00000007 r report_frame()::__c
00000007 r report_radio()::__c
00000007 r report_sonar()::__c
00000007 r print_enabled(unsigned char)::__c
00000007 r test_wp(unsigned char, Menu::arg const*)::__c
00000007 V Parameters::Parameters()::__c
00000007 V Parameters::Parameters()::__c
00000007 V Parameters::Parameters()::__c
00000007 V Parameters::Parameters()::__c
00000007 r GCS_MAVLINK::GCS_MAVLINK(unsigned int)::__c
00000007 r GCS_MAVLINK::GCS_MAVLINK(unsigned int)::__c
00000007 r GCS_MAVLINK::GCS_MAVLINK(unsigned int)::__c
00000008 t setup_erase(unsigned char, Menu::arg const*)
00000008 r __menu_name__planner_menu
00000008 r select_logs(unsigned char, Menu::arg const*)::__c
00000008 r report_tuning()::__c
00000008 r init_ardupilot()::__c
00000008 r print_log_menu()::__c
00000008 r report_batt_monitor()::__c
00000008 r report_batt_monitor()::__c
00000008 r test_wp(unsigned char, Menu::arg const*)::__c
00000008 V Parameters::Parameters()::__c
00000008 V Parameters::Parameters()::__c
00000008 V Parameters::Parameters()::__c
00000008 V Parameters::Parameters()::__c
00000008 V Parameters::Parameters()::__c
00000008 V Parameters::Parameters()::__c
00000008 V Parameters::Parameters()::__c
00000008 r GCS_MAVLINK::GCS_MAVLINK(unsigned int)::__c
00000009 r report_gyro()::__c
00000009 r print_switch(unsigned char, unsigned char, bool)::__c
00000009 r print_log_menu()::__c
00000009 r print_log_menu()::__c
00000009 r report_compass()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 r GCS_MAVLINK::GCS_MAVLINK(unsigned int)::__c
00000009 r GCS_MAVLINK::GCS_MAVLINK(unsigned int)::__c
00000009 r GCS_MAVLINK::GCS_MAVLINK(unsigned int)::__c
00000009 r GCS_MAVLINK::GCS_MAVLINK(unsigned int)::__c
0000000a T piezo_on()
0000000a T piezo_off()
0000000a r test_relay(unsigned char, Menu::arg const*)::__c
0000000a r start_new_log()::__c
0000000a r print_log_menu()::__c
0000000a r Log_Read_Startup()::__c
0000000a r test_wp(unsigned char, Menu::arg const*)::__c
0000000a V Parameters::Parameters()::__c
0000000a V Parameters::Parameters()::__c
0000000a V Parameters::Parameters()::__c
0000000a V Parameters::Parameters()::__c
0000000a V Parameters::Parameters()::__c
0000000a V Parameters::Parameters()::__c
0000000a T setup
0000000b r test_relay(unsigned char, Menu::arg const*)::__c
0000000b r report_batt_monitor()::__c
0000000b V Parameters::Parameters()::__c
0000000c t setup_accel(unsigned char, Menu::arg const*)
0000000c t process_logs(unsigned char, Menu::arg const*)
0000000c b heli_rollFactor
0000000c b heli_pitchFactor
0000000c b omega
0000000c t test_mode(unsigned char, Menu::arg const*)
0000000c T GCS_MAVLINK::send_text(gcs_severity, char const*)
0000000c V vtable for AP_IMU_Shim
0000000c V vtable for IMU
0000000c r print_switch(unsigned char, unsigned char, bool)::__c
0000000c r report_frame()::__c
0000000c r setup_factory(unsigned char, Menu::arg const*)::__c
0000000c V Parameters::Parameters()::__c
0000000c V Parameters::Parameters()::__c
0000000c V Parameters::Parameters()::__c
0000000c V Parameters::Parameters()::__c
0000000d r select_logs(unsigned char, Menu::arg const*)::__c
0000000d r test_tuning(unsigned char, Menu::arg const*)::__c
0000000d r test_battery(unsigned char, Menu::arg const*)::__c
0000000d r startup_ground()::__c
0000000d r test_wp(unsigned char, Menu::arg const*)::__c
0000000d V Parameters::Parameters()::__c
0000000d V Parameters::Parameters()::__c
0000000d V Parameters::Parameters()::__c
0000000d V Parameters::Parameters()::__c
0000000d V Parameters::Parameters()::__c
0000000d V Parameters::Parameters()::__c
0000000d V Parameters::Parameters()::__c
0000000d B sonar_mode_filter
0000000e t global destructors keyed to Serial
0000000e t global constructors keyed to Serial
0000000e t send_statustext(mavlink_channel_t)
0000000e V vtable for AP_Float16
0000000e V vtable for AP_VarS<Matrix3<float> >
0000000e V vtable for AP_VarS<Vector3<float> >
0000000e V vtable for AP_VarT<signed char>
0000000e V vtable for AP_VarT<float>
0000000e V vtable for AP_VarT<int>
0000000e r arm_motors()::__c
0000000e r erase_logs(unsigned char, Menu::arg const*)::__c
0000000e r setup_heli(unsigned char, Menu::arg const*)::__c
0000000e r setup_mode(unsigned char, Menu::arg const*)::__c
0000000e r test_sonar(unsigned char, Menu::arg const*)::__c
0000000e r select_logs(unsigned char, Menu::arg const*)::__c
0000000e r print_log_menu()::__c
0000000e r print_radio_values()::__c
0000000e r print_radio_values()::__c
0000000e r print_radio_values()::__c
0000000e r print_radio_values()::__c
0000000e r print_radio_values()::__c
0000000e r print_radio_values()::__c
0000000e r print_radio_values()::__c
0000000e r report_batt_monitor()::__c
0000000e r report_flight_modes()::__c
0000000e r dump_log(unsigned char, Menu::arg const*)::__c
0000000e V Parameters::Parameters()::__c
0000000e V Parameters::Parameters()::__c
0000000e V Parameters::Parameters()::__c
0000000e V Parameters::Parameters()::__c
0000000e V Parameters::Parameters()::__c
0000000e V Parameters::Parameters()::__c
0000000e V Parameters::Parameters()::__c
0000000e V Parameters::Parameters()::__c
0000000e V Parameters::Parameters()::__c
0000000f b current_loc
0000000f b next_command
0000000f b home
0000000f b next_WP
0000000f b prev_WP
0000000f b guided_WP
0000000f b target_WP
0000000f r report_heli()::__c
0000000f r print_log_menu()::__c
0000000f r print_log_menu()::__c
0000000f r report_version()::__c
0000000f r report_batt_monitor()::__c
0000000f r test_imu(unsigned char, Menu::arg const*)::__c
00000010 b heli_servo_out
00000010 r planner_menu_commands
00000010 b motor_out
00000010 T GCS_MAVLINK::send_message(ap_message)
00000010 W AP_VarT<float>::cast_to_float() const
00000010 r test_sonar(unsigned char, Menu::arg const*)::__c
00000010 r report_gyro()::__c
00000010 r report_heli()::__c
00000010 r report_compass()::__c
00000011 r arm_motors()::__c
00000011 r erase_logs(unsigned char, Menu::arg const*)::__c
00000011 r setup_heli(unsigned char, Menu::arg const*)::__c
00000011 r zero_eeprom()::__c
00000011 r update_commands()::__c
00000012 B Serial
00000012 B Serial1
00000012 B Serial3
00000012 t gcs_update()
00000012 t startup_ground()
00000012 r flight_mode_strings
00000012 W AP_Float16::~AP_Float16()
00000012 W AP_VarS<Matrix3<float> >::~AP_VarS()
00000012 W AP_VarS<Vector3<float> >::~AP_VarS()
00000012 W AP_VarT<signed char>::~AP_VarT()
00000012 W AP_VarT<float>::~AP_VarT()
00000012 W AP_VarT<int>::~AP_VarT()
00000012 W AP_VarT<signed char>::serialize(void*, unsigned int) const
00000012 r print_done()::__c
00000012 r setup_heli(unsigned char, Menu::arg const*)::__c
00000012 r select_logs(unsigned char, Menu::arg const*)::__c
00000012 r setup_frame(unsigned char, Menu::arg const*)::__c
00000012 r GCS_MAVLINK::handleMessage(__mavlink_message*)::__c
00000013 r setup_heli(unsigned char, Menu::arg const*)::__c
00000013 r setup_heli(unsigned char, Menu::arg const*)::__c
00000013 r setup_heli(unsigned char, Menu::arg const*)::__c
00000013 r report_heli()::__c
00000013 r report_heli()::__c
00000013 r report_heli()::__c
00000013 r report_heli()::__c
00000013 r report_heli()::__c
00000013 r setup_compass(unsigned char, Menu::arg const*)::__c
00000013 r change_command(unsigned char)::__c
00000013 r setup_batt_monitor(unsigned char, Menu::arg const*)::__c
00000014 W AP_VarT<signed char>::unserialize(void*, unsigned int)
00000014 W AP_VarT<signed char>::cast_to_float() const
00000014 W AP_VarT<int>::cast_to_float() const
00000014 r setup_heli(unsigned char, Menu::arg const*)::__c
00000014 r setup_sonar(unsigned char, Menu::arg const*)::__c
00000014 r test_tri(unsigned char, Menu::arg const*)::__c
00000015 r setup_heli(unsigned char, Menu::arg const*)::__c
00000015 r init_ardupilot()::__c
00000015 r Log_Read_Motors()::__c
00000015 r print_hit_enter()::__c
00000015 r GCS_MAVLINK::handleMessage(__mavlink_message*)::__c
00000016 T piezo_beep()
00000016 r setup_heli(unsigned char, Menu::arg const*)::__c
00000016 B adc
00000016 B sonar
00000018 t setup_tune(unsigned char, Menu::arg const*)
00000018 r __menu_name__main_menu
00000018 W AP_VarT<int>::serialize(void*, unsigned int) const
00000019 r setup_gyro(unsigned char, Menu::arg const*)::__c
0000001a r print_log_menu()::__c
0000001a r Log_Read_Nav_Tuning()::__c
0000001b r setup_heli(unsigned char, Menu::arg const*)::__c
0000001b r report_heli()::__c
0000001c W AP_VarS<Matrix3<float> >::unserialize(void*, unsigned int)
0000001c W AP_VarS<Vector3<float> >::unserialize(void*, unsigned int)
0000001c W AP_VarT<int>::unserialize(void*, unsigned int)
0000001c W AP_VarS<Matrix3<float> >::serialize(void*, unsigned int) const
0000001c W AP_VarS<Vector3<float> >::serialize(void*, unsigned int) const
0000001d r Log_Read_Attitude()::__c
0000001e r report_heli()::__c
0000001e r Log_Read_Optflow()::__c
00000020 t gcs_send_message(ap_message)
00000020 r test_current(unsigned char, Menu::arg const*)::__c
00000020 t byte_swap_4
00000021 r setup_heli(unsigned char, Menu::arg const*)::__c
00000021 r print_log_menu()::__c
00000021 r report_compass()::__c
00000021 r Log_Read_Current()::__c
00000021 r Log_Read_Performance()::__c
00000022 t clear_leds()
00000022 t print_blanks(int)
00000022 t reset_hold_I()
00000022 W AP_Float16::~AP_Float16()
00000022 W AP_VarS<Matrix3<float> >::~AP_VarS()
00000022 W AP_VarS<Vector3<float> >::~AP_VarS()
00000022 W AP_VarT<signed char>::~AP_VarT()
00000022 W AP_VarT<float>::~AP_VarT()
00000022 W AP_VarT<int>::~AP_VarT()
00000023 r setup_heli(unsigned char, Menu::arg const*)::__c
00000023 r setup_mode(unsigned char, Menu::arg const*)::__c
00000023 r print_gyro_offsets()::__c
00000024 r setup_heli(unsigned char, Menu::arg const*)::__c
00000024 r init_ardupilot()::__c
00000024 r print_accel_offsets()::__c
00000026 t print_done()
00000026 t print_hit_enter()
00000026 t Log_Read_Startup()
00000026 r Log_Read_Control_Tuning()::__c
00000028 t test_battery(unsigned char, Menu::arg const*)
00000028 t main_menu_help(unsigned char, Menu::arg const*)
00000028 t help_log(unsigned char, Menu::arg const*)
00000028 W AP_VarT<float>::unserialize(void*, unsigned int)
00000028 W AP_VarT<float>::serialize(void*, unsigned int) const
00000028 r Log_Read_Cmd()::__c
00000029 r setup_heli(unsigned char, Menu::arg const*)::__c
00000029 r setup_mode(unsigned char, Menu::arg const*)::__c
00000029 r test_gps(unsigned char, Menu::arg const*)::__c
0000002a t setup_declination(unsigned char, Menu::arg const*)
0000002b r planner_mode(unsigned char, Menu::arg const*)::__c
0000002e t setup_motors(unsigned char, Menu::arg const*)
0000002e t print_divider()
0000002e t gcs_send_text_P(gcs_severity, prog_char_t const*)
0000002e t gcs_data_stream_send(unsigned int, unsigned int)
0000002e W AP_Var_group::AP_Var_group(unsigned int, prog_char_t const*, unsigned char)
0000002f r test_radio(unsigned char, Menu::arg const*)::__c
0000002f r init_ardupilot()::__c
00000030 t planner_mode(unsigned char, Menu::arg const*)
00000030 t send_heartbeat(mavlink_channel_t)
00000030 B imu
00000031 r setup_heli(unsigned char, Menu::arg const*)::__c
00000032 T GCS_MAVLINK::init(FastSerial*)
00000032 W APM_PI::~APM_PI()
00000032 r setup_heli(unsigned char, Menu::arg const*)::__c
00000032 r Log_Read_GPS()::__c
00000033 b pending_status
00000034 t _MAV_RETURN_float
00000034 t heli_get_servo(int)
00000034 W AP_Float16::serialize(void*, unsigned int) const
00000034 t _mav_put_int8_t_array
00000034 t mavlink_msg_statustext_send
00000035 r test_radio_pwm(unsigned char, Menu::arg const*)::__c
00000036 t report_radio()
00000037 r print_wp(Location*, unsigned char)::__c
00000038 t init_throttle_cruise()
00000038 t send_current_waypoint(mavlink_channel_t)
00000038 r setup_radio(unsigned char, Menu::arg const*)::__c
00000038 r setup_factory(unsigned char, Menu::arg const*)::__c
0000003a t report_gps()
0000003a t report_imu()
0000003a B g_gps_driver
0000003c W RC_Channel::~RC_Channel()
0000003e T GCS_MAVLINK::send_text(gcs_severity, prog_char_t const*)
0000003e W AP_VarT<signed char>::AP_VarT(signed char, unsigned int, prog_char_t const*, unsigned char)
00000040 W AP_Float16::unserialize(void*, unsigned int)
00000040 t byte_swap_8
00000042 T output_min()
00000042 t report_sonar()
00000042 r setup_heli(unsigned char, Menu::arg const*)::__c
00000044 W AP_VarT<int>::AP_VarT(int, unsigned int, prog_char_t const*, unsigned char)
00000048 t change_command(unsigned char)
00000048 t update_motor_leds()
00000049 r setup_flightmodes(unsigned char, Menu::arg const*)::__c
0000004a t send_meminfo(mavlink_channel_t)
0000004a W AP_VarT<int>::AP_VarT(AP_Var_group*, unsigned int, int, prog_char_t const*, unsigned char)
0000004c t setup_show(unsigned char, Menu::arg const*)
0000004c t update_auto_yaw()
00000050 b mavlink_queue
00000050 t report_version()
00000050 r log_menu_commands
00000050 r main_menu_commands
00000050 T GCS_MAVLINK::_find_parameter(unsigned int)
00000052 W AP_IMU_Shim::update()
00000054 t print_enabled(unsigned char)
00000055 r main_menu_help(unsigned char, Menu::arg const*)::__c
00000056 t readSwitch()
00000056 t dancing_light()
00000056 T GCS_MAVLINK::queued_waypoint_send()
00000057 r help_log(unsigned char, Menu::arg const*)::__c
00000057 B dcm
0000005a t report_frame()
0000005a W AP_VarT<float>::AP_VarT(float, unsigned int, prog_char_t const*, unsigned char)
0000005c t get_num_logs()
0000005c t setup_esc(unsigned char, Menu::arg const*)
0000005e t update_GPS_light()
0000005e T GCS_MAVLINK::_count_parameters()
0000005f r setup_heli(unsigned char, Menu::arg const*)::__c
00000064 t print_gyro_offsets()
00000064 t print_accel_offsets()
00000064 t mavlink_msg_param_value_send
00000068 t zero_eeprom()
00000068 t find_last_log_page(int)
0000006a T mavlink_send_text(mavlink_channel_t, gcs_severity, char const*)
0000006a t read_num_from_serial()
0000006a W GCS_MAVLINK::~GCS_MAVLINK()
0000006c t setup_sonar(unsigned char, Menu::arg const*)
00000074 t output_motors_armed()
00000078 t setup_batt_monitor(unsigned char, Menu::arg const*)
00000078 t do_RTL()
0000007a t setup_factory(unsigned char, Menu::arg const*)
0000007a t read_control_switch()
0000007a t report_flight_modes()
0000007c t send_gps_status(mavlink_channel_t)
0000007e t test_rawgps(unsigned char, Menu::arg const*)
00000080 T __vector_25
00000080 T __vector_36
00000080 T __vector_54
00000088 t Log_Read_Raw()
0000008c t setup_frame(unsigned char, Menu::arg const*)
0000008e t dump_log(unsigned char, Menu::arg const*)
00000090 t report_gyro()
00000090 t init_compass()
00000090 t report_tuning()
00000092 t test_tuning(unsigned char, Menu::arg const*)
00000092 T GCS_MAVLINK::queued_param_send()
00000096 t print_wp(Location*, unsigned char)
0000009a t planner_gcs(unsigned char, Menu::arg const*)
0000009a t Log_Read_Motors()
0000009b B gcs0
0000009b B gcs3
0000009e t setup_mode(unsigned char, Menu::arg const*)
0000009e t Log_Read_Mode()
0000009e t Log_Write_Cmd(unsigned char, Location*)
000000a4 T __vector_26
000000a4 T __vector_37
000000a4 T __vector_55
000000a6 t send_servo_out(mavlink_channel_t)
000000a8 t test_sonar(unsigned char, Menu::arg const*)
000000aa t Log_Read_Nav_Tuning()
000000ab B compass
000000b0 t test_relay(unsigned char, Menu::arg const*)
000000b2 t erase_logs(unsigned char, Menu::arg const*)
000000b4 t read_radio()
000000b6 t get_log_boundaries(unsigned char, int&, int&)
000000be t update_events()
000000c2 t test_eedump(unsigned char, Menu::arg const*)
000000c2 t setup_compass(unsigned char, Menu::arg const*)
000000c2 t send_radio_out(mavlink_channel_t)
000000c2 t Log_Read_Attitude()
000000c4 t get_distance(Location*, Location*)
000000c4 r setup_esc(unsigned char, Menu::arg const*)::__c
000000c6 t send_radio_in(mavlink_channel_t)
000000c6 t Log_Read_Performance()
000000c6 t test_tri(unsigned char, Menu::arg const*)
000000d0 t get_bearing(Location*, Location*)
000000d0 t print_switch(unsigned char, unsigned char, bool)
000000d4 t get_stabilize_roll(long)
000000d4 t get_stabilize_pitch(long)
000000d4 t Log_Read(int, int)
000000d8 t test_radio(unsigned char, Menu::arg const*)
000000e0 r test_menu_commands
000000e4 t test_radio_pwm(unsigned char, Menu::arg const*)
000000e4 t Log_Read_Optflow()
000000e4 W APM_PI::APM_PI(unsigned int, prog_char_t const*, float const&, float const&, int const&)
000000e8 t Log_Read_Current()
000000ea t Log_Read_Control_Tuning()
000000ee t report_batt_monitor()
000000f6 t Log_Read_Cmd()
00000100 r setup_menu_commands
00000108 t setup_gyro(unsigned char, Menu::arg const*)
0000010a t mavlink_delay(unsigned long)
0000010a t test_gps(unsigned char, Menu::arg const*)
0000010c t test_current(unsigned char, Menu::arg const*)
0000010e W RC_Channel::RC_Channel(unsigned int, prog_char_t const*)
00000112 t set_next_WP(Location*)
00000112 t send_extended_status1(mavlink_channel_t, unsigned int)
00000112 T GCS_MAVLINK::GCS_MAVLINK(unsigned int)
00000112 T GCS_MAVLINK::GCS_MAVLINK(unsigned int)
00000118 t set_command_with_index(Location, int)
0000011c t get_command_with_index(int)
0000012c t calc_loiter_pitch_roll()
0000012e t arm_motors()
00000130 t report_compass()
00000148 t Log_Read_GPS()
00000156 t update_commands()
0000015c t update_trig()
00000160 t send_location(mavlink_channel_t)
00000160 t send_nav_controller_output(mavlink_channel_t)
00000166 t select_logs(unsigned char, Menu::arg const*)
00000166 t send_vfr_hud(mavlink_channel_t)
00000168 T GCS_MAVLINK::update()
0000016e t send_attitude(mavlink_channel_t)
00000174 t mavlink_send_message(mavlink_channel_t, ap_message, unsigned int)
00000178 t mavlink_try_send_message(mavlink_channel_t, ap_message, unsigned int)
00000184 t test_imu(unsigned char, Menu::arg const*)
00000188 T GCS_MAVLINK::data_stream_send(unsigned int, unsigned int)
000001a8 t print_radio_values()
000001cc t start_new_log()
000001e4 t verify_nav_wp()
000001e4 t setup_flightmodes(unsigned char, Menu::arg const*)
000001ea t init_home()
00000216 t set_mode(unsigned char)
0000021c t test_wp(unsigned char, Menu::arg const*)
00000228 t setup_radio(unsigned char, Menu::arg const*)
0000022a t send_gps_raw(mavlink_channel_t)
00000242 t calc_loiter(int, int)
0000030c t heli_init_swash()
00000312 W Parameters::~Parameters()
00000328 t report_heli()
00000330 t tuning()
00000382 t print_log_menu()
0000039a T update_throttle_mode()
0000039c t __static_initialization_and_destruction_0(int, int)
000003a0 t read_battery()
0000045c T update_yaw_mode()
0000046e T update_roll_pitch_mode()
0000052e t heli_move_swash(int, int, int, int)
00000620 t init_ardupilot()
0000071a t update_nav_wp()
000007e8 t setup_heli(unsigned char, Menu::arg const*)
00000870 t process_next_command()
000009b4 W Parameters::Parameters()
00000a1f b g
00000ffc T loop
00001604 T GCS_MAVLINK::handleMessage(__mavlink_message*)

View File

@ -1,63 +1,48 @@
%% ArduCopter.cpp
%% ArduCopter.o
In file included from /root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:53:
In file included from /root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:55:
/usr/local/share/arduino/libraries/SPI/SPI.h:25:1: warning: "SPI_CLOCK_DIV64" redefined
/usr/local/share/arduino/libraries/SPI/SPI.h:20:1: warning: this is the location of the previous definition
In file included from /root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:77:
/root/apm/ardupilot-mega/ArduCopter/Parameters.h: In constructor 'Parameters::Parameters()':
/root/apm/ardupilot-mega/ArduCopter/Parameters.h:399: warning: overflow in implicit constant conversion
/root/apm/ardupilot-mega/ArduCopter/heli.pde: In function 'void heli_init_swash()':
/root/apm/ardupilot-mega/ArduCopter/heli.pde:60: warning: comparisons like X<=Y<=Z do not have their mathematical meaning
/root/apm/ardupilot-mega/ArduCopter/setup.pde: In function 'int8_t setup_heli(uint8_t, const Menu::arg*)':
/root/apm/ardupilot-mega/ArduCopter/setup.pde:446: warning: 'max_tail' may be used uninitialized in this function
/root/apm/ardupilot-mega/ArduCopter/setup.pde:446: warning: 'min_tail' may be used uninitialized in this function
/root/apm/ardupilot-mega/ArduCopter/setup.pde:446: warning: 'max_coll' may be used uninitialized in this function
/root/apm/ardupilot-mega/ArduCopter/setup.pde:446: warning: 'min_coll' may be used uninitialized in this function
/root/apm/ardupilot-mega/ArduCopter/setup.pde:446: warning: 'max_pitch' may be used uninitialized in this function
/root/apm/ardupilot-mega/ArduCopter/setup.pde:446: warning: 'max_roll' may be used uninitialized in this function
/root/apm/ardupilot-mega/ArduCopter/setup.pde:444: warning: 'temp' may be used uninitialized in this function
/root/apm/ardupilot-mega/ArduCopter/setup.pde:467: warning: 'min_coll' may be used uninitialized in this function
/root/apm/ardupilot-mega/ArduCopter/setup.pde:467: warning: 'max_tail' may be used uninitialized in this function
/root/apm/ardupilot-mega/ArduCopter/setup.pde:467: warning: 'min_tail' may be used uninitialized in this function
/root/apm/ardupilot-mega/ArduCopter/setup.pde:467: warning: 'max_coll' may be used uninitialized in this function
/root/apm/ardupilot-mega/ArduCopter/setup.pde:467: warning: 'max_pitch' may be used uninitialized in this function
/root/apm/ardupilot-mega/ArduCopter/setup.pde:467: warning: 'max_roll' may be used uninitialized in this function
autogenerated: At global scope:
autogenerated:34: warning: 'int alt_hold_velocity()' declared 'static' but never defined
autogenerated:86: warning: 'void acknowledge(byte, byte, byte)' declared 'static' but never defined
autogenerated:87: warning: 'void send_message(byte)' declared 'static' but never defined
autogenerated:88: warning: 'void send_message(byte, long int)' declared 'static' but never defined
autogenerated:82: warning: 'void send_message(byte, const char*)' declared 'static' but never defined
autogenerated:91: warning: 'void print_current_waypoints()' declared 'static' but never defined
autogenerated:94: warning: 'void print_attitude()' declared 'static' but never defined
autogenerated:90: warning: 'void print_control_mode()' declared 'static' but never defined
autogenerated:92: warning: 'void print_position()' declared 'static' but never defined
autogenerated:96: warning: 'void print_waypoint(Location*, byte)' declared 'static' but never defined
autogenerated:97: warning: 'void print_waypoints()' declared 'static' but never defined
autogenerated:70: warning: 'long int convert_to_dec(float)' declared 'static' but never defined
autogenerated:139: warning: 'void Log_Write_Optflow()' declared 'static' but never defined
autogenerated:150: warning: 'void decrement_WP_index()' declared 'static' but never defined
/root/apm/ardupilot-mega/ArduCopter/commands.pde:149: warning: 'Location get_LOITER_home_wp()' defined but not used
/root/apm/ardupilot-mega/ArduCopter/commands_logic.pde:301: warning: 'void do_loiter_turns()' defined but not used
/root/apm/ardupilot-mega/ArduCopter/commands_logic.pde:427: warning: 'bool verify_loiter_unlim()' defined but not used
autogenerated:109: warning: 'void Log_Write_Optflow()' declared 'static' but never defined
autogenerated:90: warning: 'void Log_Write_Attitude2()' declared 'static' but never defined
autogenerated:91: warning: 'void Log_Read_Attitude2()' declared 'static' but never defined
autogenerated:121: warning: 'void decrement_WP_index()' declared 'static' but never defined
/root/apm/ardupilot-mega/ArduCopter/commands.pde:132: warning: 'Location get_LOITER_home_wp()' defined but not used
/root/apm/ardupilot-mega/ArduCopter/commands_logic.pde:432: warning: 'bool verify_loiter_unlim()' defined but not used
/root/apm/ardupilot-mega/ArduCopter/events.pde:46: warning: 'void low_battery_event()' defined but not used
autogenerated:235: warning: 'void debug_motors()' declared 'static' but never defined
autogenerated:250: warning: 'void calc_altitude_smoothing_error()' declared 'static' but never defined
/root/apm/ardupilot-mega/ArduCopter/navigation.pde:159: warning: 'int get_loiter_angle()' defined but not used
/root/apm/ardupilot-mega/ArduCopter/navigation.pde:217: warning: 'void reset_crosstrack()' defined but not used
/root/apm/ardupilot-mega/ArduCopter/navigation.pde:222: warning: 'long int get_altitude_above_home()' defined but not used
/root/apm/ardupilot-mega/ArduCopter/navigation.pde:243: warning: 'long int get_alt_distance(Location*, Location*)' defined but not used
/root/apm/ardupilot-mega/ArduCopter/radio.pde:131: warning: 'void throttle_failsafe(uint16_t)' defined but not used
/root/apm/ardupilot-mega/ArduCopter/radio.pde:188: warning: 'void trim_yaw()' defined but not used
autogenerated:268: warning: 'void readCommands()' declared 'static' but never defined
autogenerated:269: warning: 'void parseCommand(char*)' declared 'static' but never defined
autogenerated:213: warning: 'void debug_motors()' declared 'static' but never defined
/root/apm/ardupilot-mega/ArduCopter/navigation.pde:183: warning: 'int get_loiter_angle()' defined but not used
autogenerated:234: warning: 'long int get_crosstrack_correction()' declared 'static' but never defined
autogenerated:235: warning: 'long int cross_track_test()' declared 'static' but never defined
autogenerated:236: warning: 'void reset_crosstrack()' declared 'static' but never defined
autogenerated:238: warning: 'long int get_alt_distance(Location*, Location*)' declared 'static' but never defined
/root/apm/ardupilot-mega/ArduCopter/radio.pde:130: warning: 'void throttle_failsafe(uint16_t)' defined but not used
/root/apm/ardupilot-mega/ArduCopter/sensors.pde:6: warning: 'void ReadSCP1000()' defined but not used
autogenerated:272: warning: 'long int read_baro_filtered()' declared 'static' but never defined
autogenerated:248: warning: 'long int read_baro_filtered()' declared 'static' but never defined
/root/apm/ardupilot-mega/ArduCopter/sensors.pde:95: warning: 'void read_airspeed()' defined but not used
/root/apm/ardupilot-mega/ArduCopter/sensors.pde:100: warning: 'void zero_airspeed()' defined but not used
/root/apm/ardupilot-mega/ArduCopter/system.pde:465: warning: 'void set_failsafe(boolean)' defined but not used
autogenerated:311: warning: 'void init_optflow()' declared 'static' but never defined
autogenerated:319: warning: 'void fake_out_gps()' declared 'static' but never defined
/root/apm/ardupilot-mega/ArduCopter/test.pde:991: warning: 'void print_motor_out()' defined but not used
/root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:283: warning: 'heli_servo_min' defined but not used
/root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:283: warning: 'heli_servo_max' defined but not used
/root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:284: warning: 'heli_servo_out' defined but not used
/root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:443: warning: 'undo_event' defined but not used
/root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:449: warning: 'condition_rate' defined but not used
/root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:463: warning: 'simple_WP' defined but not used
/root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:468: warning: 'optflow_offset' defined but not used
/root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:469: warning: 'new_location' defined but not used
/root/apm/ardupilot-mega/ArduCopter/heli.pde:6: warning: 'rollPitch_impact_on_collective' defined but not used
/root/apm/ardupilot-mega/ArduCopter/system.pde:434: warning: 'void set_failsafe(boolean)' defined but not used
autogenerated:285: warning: 'void init_optflow()' declared 'static' but never defined
autogenerated:292: warning: 'void fake_out_gps()' declared 'static' but never defined
/root/apm/ardupilot-mega/ArduCopter/test.pde:1028: warning: 'void print_motor_out()' defined but not used
/root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:277: warning: 'heli_servo_min' defined but not used
/root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:277: warning: 'heli_servo_max' defined but not used
/root/apm/ardupilot-mega/ArduCopter/GCS_Mavlink.pde:1706: warning: 'void gcs_send_text_fmt(const prog_char_t*, ...)' defined but not used
%% libraries/APM_BMP085/APM_BMP085.o
%% libraries/APM_BMP085/APM_BMP085_hil.o
%% libraries/APM_PI/APM_PI.o
%% libraries/APM_RC/APM_RC.o
%% libraries/AP_ADC/AP_ADC_ADS7844.o
@ -88,38 +73,13 @@ autogenerated:319: warning: 'void fake_out_gps()' declared 'static' but never de
%% libraries/AP_IMU/AP_IMU_Oilpan.o
%% libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.o
In file included from /root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp:28:
/usr/local/share/arduino/libraries/SPI/../SPI/SPI.h:25:1: warning: "SPI_CLOCK_DIV64" redefined
/usr/local/share/arduino/libraries/SPI/../SPI/SPI.h:20:1: warning: this is the location of the previous definition
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp: In member function 'void AP_OpticalFlow_ADNS3080::set_led_always_on(bool)':
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp:221: warning: suggest parentheses around arithmetic in operand of |
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp: In member function 'bool AP_OpticalFlow_ADNS3080::get_frame_rate_auto()':
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp:257: warning: suggest parentheses around comparison in operand of &
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp: In member function 'void AP_OpticalFlow_ADNS3080::set_shutter_speed_auto(bool)':
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp:361: warning: suggest parentheses around arithmetic in operand of |
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp: In member function 'unsigned int AP_OpticalFlow_ADNS3080::set_shutter_speed(unsigned int)':
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp:408: warning: no return statement in function returning non-void
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp: In member function 'int AP_OpticalFlow_ADNS3080::print_pixel_data(Stream*)':
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp:441: warning: suggest parentheses around comparison in operand of &
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp:456: warning: no return statement in function returning non-void
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp:456: warning: control reaches end of non-void function
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp: In member function 'unsigned int AP_OpticalFlow_ADNS3080::set_shutter_speed(unsigned int)':
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp:408: warning: control reaches end of non-void function
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp: In member function 'virtual bool AP_OpticalFlow_ADNS3080::init(bool)':
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp:80: warning: control reaches end of non-void function
/usr/local/share/arduino/libraries/SPI/SPI.h:25:1: warning: "SPI_CLOCK_DIV64" redefined
/usr/local/share/arduino/libraries/SPI/SPI.h:20:1: warning: this is the location of the previous definition
%% libraries/AP_OpticalFlow/AP_OpticalFlow.o
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow.cpp: In member function 'virtual int AP_OpticalFlow::read()':
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow.cpp:38: warning: no return statement in function returning non-void
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow.cpp: In member function 'virtual byte AP_OpticalFlow::read_register(byte)':
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow.cpp:44: warning: no return statement in function returning non-void
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow.cpp: In member function 'virtual void AP_OpticalFlow::get_position(float, float, float, float)':
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow.cpp:88: warning: unused variable 'i'
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow.cpp: In member function 'virtual byte AP_OpticalFlow::read_register(byte)':
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow.cpp:44: warning: control reaches end of non-void function
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow.cpp: In member function 'virtual int AP_OpticalFlow::read()':
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow.cpp:38: warning: control reaches end of non-void function
%% libraries/AP_RangeFinder/AP_RangeFinder_MaxsonarXL.o
%% libraries/AP_RangeFinder/AP_RangeFinder_SharpGP2Y.o
%% libraries/AP_RangeFinder/RangeFinder.o
%% libraries/AP_Relay/AP_Relay.o
%% libraries/DataFlash/DataFlash.o
In file included from /root/apm/ardupilot-mega/libraries/DataFlash/DataFlash.cpp:35:
/usr/local/share/arduino/libraries/SPI/SPI.h:25:1: warning: "SPI_CLOCK_DIV64" redefined
@ -129,6 +89,7 @@ In file included from /root/apm/ardupilot-mega/libraries/DataFlash/DataFlash.cpp
%% libraries/FastSerial/vprintf.o
%% libraries/GCS_MAVLink/GCS_MAVLink.o
%% libraries/ModeFilter/ModeFilter.o
%% libraries/RC_Channel/RC_Channel_aux.o
%% libraries/RC_Channel/RC_Channel.o
%% libraries/memcheck/memcheck.o
%% libraries/FastSerial/ftoa_engine.o

View File

@ -4,19 +4,19 @@
00000001 b motor_armed
00000001 b motor_light
00000001 b control_mode
00000001 b gps_watchdog
00000001 b simple_timer
00000001 d yaw_tracking
00000001 b land_complete
00000001 b throttle_mode
00000001 b command_may_ID
00000001 b wp_verify_byte
00000001 b xtrack_enabled
00000001 d altitude_sensor
00000001 b command_must_ID
00000001 b command_yaw_dir
00000001 b new_radio_frame
00000001 b roll_pitch_mode
00000001 b counter_one_herz
00000001 b delta_ms_fiftyhz
00000001 b did_ground_start
00000001 b in_mavlink_delay
00000001 b invalid_throttle
@ -27,48 +27,51 @@
00000001 b command_may_index
00000001 b oldSwitchPosition
00000001 b command_must_index
00000001 b delta_ms_fast_loop
00000001 d ground_start_count
00000001 b medium_loopCounter
00000001 b command_yaw_relative
00000001 b delta_ms_medium_loop
00000001 d jump
00000001 b event_id
00000001 b led_mode
00000001 b yaw_mode
00000001 b GPS_light
00000001 b alt_timer
00000001 b loop_step
00000001 b do_simple
00000001 b trim_flag
00000001 b dancing_light()::step
00000001 b update_motor_leds()::blink
00000001 b radio_input_switch()::bouncer
00000001 b read_control_switch()::switch_debouncer
00000001 d GCS_MAVLINK::handleMessage(__mavlink_message*)::mav_nav
00000001 B mavdelay
00000002 T mavlink_acknowledge(mavlink_channel_t, unsigned char, unsigned char, unsigned char)
00000001 B relay
00000002 T userhook_50Hz()
00000002 T userhook_init()
00000002 b climb_rate
00000002 b loiter_sum
00000002 b event_delay
00000002 b event_value
00000002 b event_repeat
00000002 b loiter_total
00000002 b nav_throttle
00000002 b x_rate_error
00000002 b y_rate_error
00000002 b altitude_rate
00000002 b gps_fix_count
00000002 b velocity_land
00000002 b mainLoop_count
00000002 b x_actual_speed
00000002 b y_actual_speed
00000002 b loiter_time_max
00000002 b command_yaw_time
00000002 b event_undo_value
00000002 b command_yaw_speed
00000002 b auto_level_counter
00000002 b ground_temperature
00000002 b waypoint_speed_gov
00000002 b heli_manual_override
00000002 b heli_servo_out_count
00000002 b superslow_loopCounter
00000002 r comma
00000002 b g_gps
00000002 b G_Dt_max
00000002 b airspeed
00000002 b baro_alt
00000002 b sonar_alt
00000002 T GCS_MAVLINK::acknowledge(unsigned char, unsigned char, unsigned char)
00000002 b arm_motors()::arming_counter
00000002 r setup_frame(unsigned char, Menu::arg const*)::__c
00000002 r setup_frame(unsigned char, Menu::arg const*)::__c
@ -77,11 +80,6 @@
00000002 r test_wp(unsigned char, Menu::arg const*)::__c
00000002 V APM_PI::APM_PI(unsigned int, prog_char_t const*, float const&, float const&, int const&)::__c
00000002 V APM_PI::APM_PI(unsigned int, prog_char_t const*, float const&, float const&, int const&)::__c
00000002 B adc
00000002 B x_actual_speed
00000002 B x_rate_error
00000002 B y_actual_speed
00000002 B y_rate_error
00000003 r setup_gyro(unsigned char, Menu::arg const*)::__c
00000003 r select_logs(unsigned char, Menu::arg const*)::__c
00000003 r setup_sonar(unsigned char, Menu::arg const*)::__c
@ -94,16 +92,15 @@
00000004 d cos_pitch_x
00000004 b event_timer
00000004 b loiter_time
00000004 b nav_bearing
00000004 d scaleLongUp
00000004 b sin_pitch_y
00000004 b wp_distance
00000004 b abs_pressure
00000004 b circle_angle
00000004 b current_amps
00000004 b old_altitude
00000004 b original_alt
00000004 b bearing_error
00000004 b simple_cos_x
00000004 b simple_sin_y
00000004 b current_total
00000004 b nav_loopTimer
00000004 d scaleLongDown
@ -117,24 +114,21 @@
00000004 b condition_start
00000004 b condition_value
00000004 b ground_pressure
00000004 b loiter_time_max
00000004 b target_altitude
00000004 d battery_voltage1
00000004 d battery_voltage2
00000004 d battery_voltage3
00000004 d battery_voltage4
00000004 b medium_loopTimer
00000004 b wp_totalDistance
00000004 b command_yaw_delta
00000004 b command_yaw_start
00000004 b fiftyhz_loopTimer
00000004 b crosstrack_bearing
00000004 b fast_loopTimeStamp
00000004 b old_target_bearing
00000004 b throttle_integrator
00000004 b saved_target_bearing
00000004 r __menu_name__log_menu
00000004 b command_yaw_start_time
00000004 b initial_simple_bearing
00000004 b original_target_bearing
00000004 d G_Dt
00000004 b dTnav
00000004 b nav_lat
@ -155,9 +149,8 @@
00000004 r select_logs(unsigned char, Menu::arg const*)::__c
00000004 r select_logs(unsigned char, Menu::arg const*)::__c
00000004 r setup_sonar(unsigned char, Menu::arg const*)::__c
00000004 r print_switch(unsigned char, unsigned char, bool)::__c
00000004 b mavlink_delay(unsigned long)::last_1hz
00000004 b mavlink_delay(unsigned long)::last_3hz
00000004 b mavlink_delay(unsigned long)::last_10hz
00000004 b mavlink_delay(unsigned long)::last_50hz
00000004 r print_enabled(unsigned char)::__c
00000004 r setup_compass(unsigned char, Menu::arg const*)::__c
@ -175,6 +168,7 @@
00000005 r select_logs(unsigned char, Menu::arg const*)::__c
00000005 r select_logs(unsigned char, Menu::arg const*)::__c
00000005 r Log_Read_Raw()::__c
00000005 r print_switch(unsigned char, unsigned char, bool)::__c
00000005 r Log_Read_Mode()::__c
00000005 r report_tuning()::__c
00000005 r print_log_menu()::__c
@ -223,6 +217,8 @@
00000007 r test_wp(unsigned char, Menu::arg const*)::__c
00000007 V Parameters::Parameters()::__c
00000007 V Parameters::Parameters()::__c
00000007 V Parameters::Parameters()::__c
00000007 V Parameters::Parameters()::__c
00000007 r GCS_MAVLINK::GCS_MAVLINK(unsigned int)::__c
00000007 r GCS_MAVLINK::GCS_MAVLINK(unsigned int)::__c
00000007 r GCS_MAVLINK::GCS_MAVLINK(unsigned int)::__c
@ -230,6 +226,7 @@
00000008 r __menu_name__planner_menu
00000008 r select_logs(unsigned char, Menu::arg const*)::__c
00000008 r report_tuning()::__c
00000008 r init_ardupilot()::__c
00000008 r print_log_menu()::__c
00000008 r report_batt_monitor()::__c
00000008 r report_batt_monitor()::__c
@ -239,9 +236,11 @@
00000008 V Parameters::Parameters()::__c
00000008 V Parameters::Parameters()::__c
00000008 V Parameters::Parameters()::__c
00000008 V Parameters::Parameters()::__c
00000008 V Parameters::Parameters()::__c
00000008 r GCS_MAVLINK::GCS_MAVLINK(unsigned int)::__c
00000009 r report_gyro()::__c
00000009 r print_switch(unsigned char, unsigned char)::__c
00000009 r print_switch(unsigned char, unsigned char, bool)::__c
00000009 r print_log_menu()::__c
00000009 r print_log_menu()::__c
00000009 r report_compass()::__c
@ -269,17 +268,19 @@
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 r GCS_MAVLINK::GCS_MAVLINK(unsigned int)::__c
00000009 r GCS_MAVLINK::GCS_MAVLINK(unsigned int)::__c
00000009 r GCS_MAVLINK::GCS_MAVLINK(unsigned int)::__c
00000009 r GCS_MAVLINK::GCS_MAVLINK(unsigned int)::__c
0000000a T piezo_on()
0000000a T piezo_off()
0000000a r test_relay(unsigned char, Menu::arg const*)::__c
0000000a r start_new_log()::__c
0000000a r print_log_menu()::__c
0000000a r Log_Read_Startup()::__c
0000000a r test_wp(unsigned char, Menu::arg const*)::__c
0000000a r test_mag(unsigned char, Menu::arg const*)::__c
0000000a V Parameters::Parameters()::__c
0000000a V Parameters::Parameters()::__c
0000000a V Parameters::Parameters()::__c
0000000a V Parameters::Parameters()::__c
@ -295,15 +296,16 @@
0000000c b heli_pitchFactor
0000000c b omega
0000000c t test_mode(unsigned char, Menu::arg const*)
0000000c T GCS_MAVLINK::send_text(unsigned char, char const*)
0000000c T GCS_MAVLINK::send_text(gcs_severity, char const*)
0000000c V vtable for IMU
0000000c r print_switch(unsigned char, unsigned char, bool)::__c
0000000c r report_frame()::__c
0000000c r setup_factory(unsigned char, Menu::arg const*)::__c
0000000c r test_baro(unsigned char, Menu::arg const*)::__c
0000000c V Parameters::Parameters()::__c
0000000c V Parameters::Parameters()::__c
0000000c V Parameters::Parameters()::__c
0000000c V Parameters::Parameters()::__c
0000000d r verify_RTL()::__c
0000000d r select_logs(unsigned char, Menu::arg const*)::__c
0000000d r test_tuning(unsigned char, Menu::arg const*)::__c
0000000d r test_battery(unsigned char, Menu::arg const*)::__c
@ -319,6 +321,7 @@
0000000d B sonar_mode_filter
0000000e t global destructors keyed to Serial
0000000e t global constructors keyed to Serial
0000000e t send_statustext(mavlink_channel_t)
0000000e V vtable for AP_Float16
0000000e V vtable for AP_VarA<float, (unsigned char)6>
0000000e V vtable for AP_VarS<Matrix3<float> >
@ -365,22 +368,23 @@
0000000f r report_batt_monitor()::__c
0000000f r test_imu(unsigned char, Menu::arg const*)::__c
0000000f V AP_IMU_Oilpan::AP_IMU_Oilpan(AP_ADC*, unsigned int)::__c
00000010 b heli_servo_out
00000010 r planner_menu_commands
00000010 b motor_out
00000010 T GCS_MAVLINK::send_message(ap_message)
00000010 W AP_VarT<float>::cast_to_float() const
00000010 r test_sonar(unsigned char, Menu::arg const*)::__c
00000010 r report_gyro()::__c
00000010 r report_heli()::__c
00000010 r report_compass()::__c
00000010 t mavlink_get_channel_status
00000011 r erase_logs(unsigned char, Menu::arg const*)::__c
00000011 r setup_heli(unsigned char, Menu::arg const*)::__c
00000011 r zero_eeprom()::__c
00000011 r update_commands()::__c
00000011 r Log_Read_Attitude()::__c
00000012 B Serial
00000012 B Serial1
00000012 B Serial3
00000012 t gcs_update()
00000012 r flight_mode_strings
00000012 W AP_Float16::~AP_Float16()
00000012 W AP_VarA<float, (unsigned char)6>::~AP_VarA()
@ -397,6 +401,8 @@
00000012 r GCS_MAVLINK::handleMessage(__mavlink_message*)::__c
00000013 r setup_heli(unsigned char, Menu::arg const*)::__c
00000013 r setup_heli(unsigned char, Menu::arg const*)::__c
00000013 r setup_heli(unsigned char, Menu::arg const*)::__c
00000013 r report_heli()::__c
00000013 r report_heli()::__c
00000013 r report_heli()::__c
00000013 r report_heli()::__c
@ -410,23 +416,21 @@
00000014 r setup_heli(unsigned char, Menu::arg const*)::__c
00000014 r setup_sonar(unsigned char, Menu::arg const*)::__c
00000014 r test_tri(unsigned char, Menu::arg const*)::__c
00000015 r map_baudrate(signed char, unsigned long)::__c
00000015 r setup_heli(unsigned char, Menu::arg const*)::__c
00000015 r init_ardupilot()::__c
00000015 r Log_Read_Motors()::__c
00000015 r print_hit_enter()::__c
00000015 r GCS_MAVLINK::handleMessage(__mavlink_message*)::__c
00000016 T piezo_beep()
00000016 r setup_heli(unsigned char, Menu::arg const*)::__c
00000016 r init_ardupilot()::__c
00000016 r GCS_MAVLINK::update()::__c
00000016 B sonar
00000017 r __menu_name__main_menu
00000018 t setup_tune(unsigned char, Menu::arg const*)
00000018 t setup_accel(unsigned char, Menu::arg const*)
00000018 r __menu_name__main_menu
00000018 W AP_VarT<int>::serialize(void*, unsigned int) const
00000018 b mavlink_get_channel_status::m_mavlink_status
00000019 r setup_gyro(unsigned char, Menu::arg const*)::__c
00000019 r GCS_MAVLINK::update()::__c
0000001a r print_log_menu()::__c
0000001a r Log_Read_Nav_Tuning()::__c
0000001b r setup_heli(unsigned char, Menu::arg const*)::__c
0000001b r report_heli()::__c
0000001c W AP_VarA<float, (unsigned char)6>::unserialize(void*, unsigned int)
@ -436,19 +440,21 @@
0000001c W AP_VarA<float, (unsigned char)6>::serialize(void*, unsigned int) const
0000001c W AP_VarS<Matrix3<float> >::serialize(void*, unsigned int) const
0000001c W AP_VarS<Vector3<float> >::serialize(void*, unsigned int) const
0000001d r Log_Read_Attitude()::__c
0000001e r report_heli()::__c
0000001e r Log_Read_Optflow()::__c
0000001e r Log_Read_Nav_Tuning()::__c
0000001f r test_mag(unsigned char, Menu::arg const*)::__c
00000020 t gcs_send_message(ap_message)
00000020 r test_current(unsigned char, Menu::arg const*)::__c
00000020 t byte_swap_4
00000021 r setup_heli(unsigned char, Menu::arg const*)::__c
00000021 r print_log_menu()::__c
00000021 r report_compass()::__c
00000021 r Log_Read_Current()::__c
00000021 r Log_Read_Performance()::__c
00000022 t clear_leds()
00000022 t print_blanks(int)
00000022 t reset_hold_I()
00000022 t startup_ground()
00000022 W AP_Float16::~AP_Float16()
00000022 W AP_VarA<float, (unsigned char)6>::~AP_VarA()
00000022 W AP_VarS<Matrix3<float> >::~AP_VarS()
@ -459,16 +465,13 @@
00000023 r setup_heli(unsigned char, Menu::arg const*)::__c
00000023 r setup_mode(unsigned char, Menu::arg const*)::__c
00000023 r print_gyro_offsets()::__c
00000024 t startup_ground()
00000024 r setup_heli(unsigned char, Menu::arg const*)::__c
00000024 r init_ardupilot()::__c
00000024 r print_accel_offsets()::__c
00000025 r setup_factory(unsigned char, Menu::arg const*)::__c
00000026 t print_done()
00000026 b mavlink_queue
00000026 t print_hit_enter()
00000026 t Log_Read_Startup()
00000027 r test_xbee(unsigned char, Menu::arg const*)::__c
00000026 r Log_Read_Control_Tuning()::__c
00000028 t test_battery(unsigned char, Menu::arg const*)
00000028 t main_menu_help(unsigned char, Menu::arg const*)
00000028 t help_log(unsigned char, Menu::arg const*)
@ -479,90 +482,94 @@
00000029 r setup_mode(unsigned char, Menu::arg const*)::__c
00000029 r test_gps(unsigned char, Menu::arg const*)::__c
0000002a t setup_declination(unsigned char, Menu::arg const*)
0000002a r Log_Read_Control_Tuning()::__c
0000002b r planner_mode(unsigned char, Menu::arg const*)::__c
0000002e t setup_motors(unsigned char, Menu::arg const*)
0000002e t print_divider()
0000002e t send_rate(unsigned int, unsigned int)
0000002e t gcs_send_text_P(gcs_severity, prog_char_t const*)
0000002e t gcs_data_stream_send(unsigned int, unsigned int)
0000002e W AP_Var_group::AP_Var_group(unsigned int, prog_char_t const*, unsigned char)
0000002e r Log_Read_Performance()::__c
0000002f r test_radio(unsigned char, Menu::arg const*)::__c
0000002f r init_ardupilot()::__c
00000030 t planner_mode(unsigned char, Menu::arg const*)
00000032 T GCS_MAVLINK::init(BetterStream*)
00000030 t send_heartbeat(mavlink_channel_t)
00000031 r setup_heli(unsigned char, Menu::arg const*)::__c
00000032 T GCS_MAVLINK::init(FastSerial*)
00000032 W APM_PI::~APM_PI()
00000032 r setup_heli(unsigned char, Menu::arg const*)::__c
00000032 r Log_Read_GPS()::__c
00000033 b pending_status
00000034 t heli_get_servo(int)
00000034 W AP_Float16::serialize(void*, unsigned int) const
00000034 t _mav_put_int8_t_array
00000034 t mavlink_msg_statustext_send
00000035 r test_radio_pwm(unsigned char, Menu::arg const*)::__c
00000036 t report_radio()
00000036 r Log_Read_GPS()::__c
00000037 r print_wp(Location*, unsigned char)::__c
00000038 t init_throttle_cruise()
00000038 t send_current_waypoint(mavlink_channel_t)
00000038 r setup_radio(unsigned char, Menu::arg const*)::__c
00000038 r setup_factory(unsigned char, Menu::arg const*)::__c
0000003a t report_gps()
0000003a t report_imu()
0000003c W RC_Channel::~RC_Channel()
0000003d B g_gps_driver
0000003e t verify_RTL()
0000003e T GCS_MAVLINK::send_text(unsigned char, prog_char_t const*)
0000003e T GCS_MAVLINK::send_text(gcs_severity, prog_char_t const*)
0000003e W AP_VarT<signed char>::AP_VarT(signed char, unsigned int, prog_char_t const*, unsigned char)
00000040 t read_AHRS()
00000040 W AP_Float16::unserialize(void*, unsigned int)
00000040 B adc
00000040 t byte_swap_8
00000040 t crc_accumulate
00000042 T output_min()
00000042 t report_sonar()
00000042 r setup_heli(unsigned char, Menu::arg const*)::__c
00000044 W AP_VarT<int>::AP_VarT(int, unsigned int, prog_char_t const*, unsigned char)
00000048 t change_command(unsigned char)
00000048 t update_motor_leds()
00000049 r setup_flightmodes(unsigned char, Menu::arg const*)::__c
0000004a t send_meminfo(mavlink_channel_t)
0000004a W AP_VarT<int>::AP_VarT(AP_Var_group*, unsigned int, int, prog_char_t const*, unsigned char)
0000004c t setup_show(unsigned char, Menu::arg const*)
0000004c t update_auto_yaw()
0000004c B imu
0000004e T mavlink_send_text(mavlink_channel_t, unsigned char, char const*)
00000050 b mavlink_queue
00000050 r log_menu_commands
00000050 r main_menu_commands
00000050 t read_AHRS()
00000050 T GCS_MAVLINK::_find_parameter(unsigned int)
00000052 t change_command(unsigned char)
00000050 B imu
00000052 t report_version()
00000054 t print_enabled(unsigned char)
00000054 t update_motor_leds()
00000054 t report_flight_modes()
00000055 r main_menu_help(unsigned char, Menu::arg const*)::__c
00000055 r setup_flightmodes(unsigned char, Menu::arg const*)::__c
00000056 t readSwitch()
00000056 t dancing_light()
00000056 T GCS_MAVLINK::queued_waypoint_send()
00000057 r help_log(unsigned char, Menu::arg const*)::__c
00000058 t Log_Write_Attitude()
0000005a t report_frame()
0000005a t read_control_switch()
0000005a W AP_VarT<float>::AP_VarT(float, unsigned int, prog_char_t const*, unsigned char)
0000005c t get_num_logs()
0000005c t setup_esc(unsigned char, Menu::arg const*)
0000005e t update_GPS_light()
0000005e t radio_input_switch()
0000005e T GCS_MAVLINK::_count_parameters()
0000005f r setup_heli(unsigned char, Menu::arg const*)::__c
00000060 t _mavlink_send_uart
00000060 B barometer
00000062 t print_switch(unsigned char, unsigned char)
00000064 t test_xbee(unsigned char, Menu::arg const*)
00000064 B barometer
00000064 t mavlink_msg_param_value_send
00000068 t zero_eeprom()
00000068 t find_last_log_page(int)
0000006a T mavlink_send_text(mavlink_channel_t, gcs_severity, char const*)
0000006a t read_num_from_serial()
0000006a W GCS_MAVLINK::~GCS_MAVLINK()
0000006c t setup_sonar(unsigned char, Menu::arg const*)
00000074 t output_motors_armed()
00000078 t setup_batt_monitor(unsigned char, Menu::arg const*)
00000078 t do_RTL()
0000007a t setup_factory(unsigned char, Menu::arg const*)
0000007a t read_control_switch()
0000007a t report_flight_modes()
0000007c t send_gps_status(mavlink_channel_t)
0000007c t test_baro(unsigned char, Menu::arg const*)
0000007e t test_rawgps(unsigned char, Menu::arg const*)
00000080 T __vector_25
00000080 T __vector_36
00000080 T __vector_54
00000082 t do_RTL()
00000086 t Log_Read_Attitude()
00000082 t Log_Write_Attitude()
00000088 t Log_Read_Raw()
0000008c t setup_frame(unsigned char, Menu::arg const*)
0000008c t print_gyro_offsets()
@ -571,100 +578,112 @@
00000092 t report_gyro()
00000092 t test_tuning(unsigned char, Menu::arg const*)
00000092 t report_tuning()
00000095 r init_ardupilot()::__c
00000096 t map_baudrate(signed char, unsigned long)
00000092 T GCS_MAVLINK::queued_param_send()
00000096 t print_wp(Location*, unsigned char)
0000009a t planner_gcs(unsigned char, Menu::arg const*)
0000009a t init_compass()
0000009a t Log_Read_Motors()
0000009d B gcs
0000009d B hil
0000009b B gcs0
0000009b B gcs3
0000009e t setup_mode(unsigned char, Menu::arg const*)
0000009e t Log_Write_Cmd(unsigned char, Location*)
000000a0 t Log_Read_Mode()
000000a4 T __vector_26
000000a4 T __vector_37
000000a4 T __vector_55
000000a6 t send_servo_out(mavlink_channel_t)
000000aa t test_sonar(unsigned char, Menu::arg const*)
000000b0 t read_radio()
000000aa t Log_Read_Nav_Tuning()
000000b0 t test_relay(unsigned char, Menu::arg const*)
000000b2 t erase_logs(unsigned char, Menu::arg const*)
000000b4 t test_relay(unsigned char, Menu::arg const*)
000000b4 t planner_gcs(unsigned char, Menu::arg const*)
000000b4 t read_radio()
000000b6 t get_log_boundaries(unsigned char, int&, int&)
000000b7 B compass
000000be t Log_Read_Nav_Tuning()
000000be t update_events()
000000c2 t setup_compass(unsigned char, Menu::arg const*)
000000c2 t send_radio_out(mavlink_channel_t)
000000c2 t Log_Read_Attitude()
000000c4 t get_distance(Location*, Location*)
000000c4 t update_events()
000000c4 r setup_esc(unsigned char, Menu::arg const*)::__c
000000c6 t test_eedump(unsigned char, Menu::arg const*)
000000c6 t Log_Read(int, int)
000000c6 t send_radio_in(mavlink_channel_t)
000000c6 t Log_Read_Performance()
000000c6 t test_tri(unsigned char, Menu::arg const*)
000000c7 B dcm
000000ca t init_barometer()
000000d0 t get_bearing(Location*, Location*)
000000d2 t print_switch(unsigned char, unsigned char, bool)
000000d4 t get_stabilize_roll(long)
000000d4 t get_stabilize_pitch(long)
000000d4 t Log_Read(int, int)
000000d8 t test_radio(unsigned char, Menu::arg const*)
000000d8 t read_barometer()
000000de t Log_Read_Performance()
000000de t Log_Read_Control_Tuning()
000000de t test_adc(unsigned char, Menu::arg const*)
000000e0 b mavlink_parse_char::m_mavlink_message
000000e4 t test_radio_pwm(unsigned char, Menu::arg const*)
000000e4 t Log_Read_Optflow()
000000e4 W APM_PI::APM_PI(unsigned int, prog_char_t const*, float const&, float const&, int const&)
000000e6 t setup_flightmodes(unsigned char, Menu::arg const*)
000000e8 t Log_Read_Current()
000000ea t Log_Read_Control_Tuning()
000000ee t report_batt_monitor()
000000f4 t _mav_finalize_message_chan_send
000000f6 t Log_Read_Cmd()
000000fa t calc_nav_pitch_roll()
00000100 r test_menu_commands
00000100 r setup_menu_commands
00000106 t setup_gyro(unsigned char, Menu::arg const*)
0000010a t mavlink_delay(unsigned long)
0000010a t send_raw_imu2(mavlink_channel_t)
0000010a t test_gps(unsigned char, Menu::arg const*)
0000010c W RC_Channel::RC_Channel(unsigned int, prog_char_t const*)
00000112 t test_current(unsigned char, Menu::arg const*)
0000010c t test_current(unsigned char, Menu::arg const*)
0000010e W RC_Channel::RC_Channel(unsigned int, prog_char_t const*)
00000112 t set_next_WP(Location*)
00000112 t send_extended_status1(mavlink_channel_t, unsigned int)
00000112 T GCS_MAVLINK::GCS_MAVLINK(unsigned int)
00000112 T GCS_MAVLINK::GCS_MAVLINK(unsigned int)
00000118 t set_command_with_index(Location, int)
00000118 T GCS_MAVLINK::_queued_send()
00000120 r test_menu_commands
00000128 t get_command_with_index(int)
0000011c t get_command_with_index(int)
0000012c t calc_loiter_pitch_roll()
00000130 t report_compass()
00000134 T GCS_MAVLINK::send_message(unsigned char, unsigned long)
0000014e T GCS_MAVLINK::update()
00000150 t update_trig()
00000152 t set_next_WP(Location*)
00000156 t Log_Read_GPS()
00000148 t Log_Read_GPS()
00000156 t update_commands()
0000015c t update_trig()
00000160 t send_location(mavlink_channel_t)
00000160 t send_nav_controller_output(mavlink_channel_t)
00000162 T GCS_MAVLINK::data_stream_send(unsigned int, unsigned int)
00000166 t select_logs(unsigned char, Menu::arg const*)
0000016c t update_commands()
00000170 t test_mag(unsigned char, Menu::arg const*)
00000172 t update_nav_wp()
000001a0 t init_home()
00000166 t send_vfr_hud(mavlink_channel_t)
00000168 T GCS_MAVLINK::update()
0000016c t test_imu(unsigned char, Menu::arg const*)
0000016e t send_attitude(mavlink_channel_t)
00000174 t mavlink_send_message(mavlink_channel_t, ap_message, unsigned int)
000001a2 t mavlink_try_send_message(mavlink_channel_t, ap_message, unsigned int)
000001a8 t print_radio_values()
000001b8 t test_imu(unsigned char, Menu::arg const*)
000001be T GCS_MAVLINK::data_stream_send(unsigned int, unsigned int)
000001ca t arm_motors()
000001ca t mavlink_delay(unsigned long)
000001ce t start_new_log()
00000202 t set_mode(unsigned char)
000001be t arm_motors()
000001cc t start_new_log()
000001e4 t setup_flightmodes(unsigned char, Menu::arg const*)
000001e6 t verify_nav_wp()
000001ea t init_home()
00000216 t set_mode(unsigned char)
0000021a t send_raw_imu1(mavlink_channel_t)
00000220 t test_wp(unsigned char, Menu::arg const*)
00000228 t setup_radio(unsigned char, Menu::arg const*)
000002b8 t heli_init_swash()
000002d0 t report_heli()
000002ea t tuning()
00000330 t calc_nav_rate(int, int, int, int)
00000358 T update_throttle_mode()
00000368 t heli_move_swash(int, int, int, int)
0000022a t send_gps_raw(mavlink_channel_t)
00000242 t calc_loiter(int, int)
00000268 t send_raw_imu3(mavlink_channel_t)
0000030c t heli_init_swash()
00000312 W Parameters::~Parameters()
0000032a t report_heli()
00000330 t tuning()
00000384 t print_log_menu()
000003be t read_battery()
0000042a T update_yaw_mode()
000004b2 t mavlink_parse_char
00000556 T update_roll_pitch_mode()
00000632 t init_ardupilot()
0000071a t setup_heli(unsigned char, Menu::arg const*)
00000818 t __static_initialization_and_destruction_0(int, int)
000008e4 t process_next_command()
0000097a W Parameters::Parameters()
000009ad b g
000011d8 T GCS_MAVLINK::handleMessage(__mavlink_message*)
000017ac t mavlink_try_send_message(mavlink_channel_t, unsigned char, unsigned int)
00001af6 T loop
0000039a T update_throttle_mode()
000003a0 t read_battery()
0000045c T update_yaw_mode()
0000046e T update_roll_pitch_mode()
0000052e t heli_move_swash(int, int, int, int)
000005cc t __static_initialization_and_destruction_0(int, int)
00000640 t init_ardupilot()
0000071a t update_nav_wp()
000007ec t setup_heli(unsigned char, Menu::arg const*)
00000870 t process_next_command()
000009b4 W Parameters::Parameters()
00000a1f b g
000012ec T GCS_MAVLINK::handleMessage(__mavlink_message*)
0000158a T loop

View File

@ -1,63 +1,48 @@
%% ArduCopter.cpp
%% ArduCopter.o
In file included from /root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:53:
In file included from /root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:55:
/usr/local/share/arduino/libraries/SPI/SPI.h:25:1: warning: "SPI_CLOCK_DIV64" redefined
/usr/local/share/arduino/libraries/SPI/SPI.h:20:1: warning: this is the location of the previous definition
In file included from /root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:77:
/root/apm/ardupilot-mega/ArduCopter/Parameters.h: In constructor 'Parameters::Parameters()':
/root/apm/ardupilot-mega/ArduCopter/Parameters.h:399: warning: overflow in implicit constant conversion
/root/apm/ardupilot-mega/ArduCopter/heli.pde: In function 'void heli_init_swash()':
/root/apm/ardupilot-mega/ArduCopter/heli.pde:60: warning: comparisons like X<=Y<=Z do not have their mathematical meaning
/root/apm/ardupilot-mega/ArduCopter/setup.pde: In function 'int8_t setup_heli(uint8_t, const Menu::arg*)':
/root/apm/ardupilot-mega/ArduCopter/setup.pde:446: warning: 'max_tail' may be used uninitialized in this function
/root/apm/ardupilot-mega/ArduCopter/setup.pde:446: warning: 'min_tail' may be used uninitialized in this function
/root/apm/ardupilot-mega/ArduCopter/setup.pde:446: warning: 'max_coll' may be used uninitialized in this function
/root/apm/ardupilot-mega/ArduCopter/setup.pde:446: warning: 'min_coll' may be used uninitialized in this function
/root/apm/ardupilot-mega/ArduCopter/setup.pde:446: warning: 'max_pitch' may be used uninitialized in this function
/root/apm/ardupilot-mega/ArduCopter/setup.pde:446: warning: 'max_roll' may be used uninitialized in this function
/root/apm/ardupilot-mega/ArduCopter/setup.pde:444: warning: 'temp' may be used uninitialized in this function
/root/apm/ardupilot-mega/ArduCopter/setup.pde:467: warning: 'min_coll' may be used uninitialized in this function
/root/apm/ardupilot-mega/ArduCopter/setup.pde:467: warning: 'max_tail' may be used uninitialized in this function
/root/apm/ardupilot-mega/ArduCopter/setup.pde:467: warning: 'min_tail' may be used uninitialized in this function
/root/apm/ardupilot-mega/ArduCopter/setup.pde:467: warning: 'max_coll' may be used uninitialized in this function
/root/apm/ardupilot-mega/ArduCopter/setup.pde:467: warning: 'max_pitch' may be used uninitialized in this function
/root/apm/ardupilot-mega/ArduCopter/setup.pde:467: warning: 'max_roll' may be used uninitialized in this function
autogenerated: At global scope:
autogenerated:34: warning: 'int alt_hold_velocity()' declared 'static' but never defined
autogenerated:86: warning: 'void acknowledge(byte, byte, byte)' declared 'static' but never defined
autogenerated:87: warning: 'void send_message(byte)' declared 'static' but never defined
autogenerated:88: warning: 'void send_message(byte, long int)' declared 'static' but never defined
autogenerated:82: warning: 'void send_message(byte, const char*)' declared 'static' but never defined
autogenerated:91: warning: 'void print_current_waypoints()' declared 'static' but never defined
autogenerated:94: warning: 'void print_attitude()' declared 'static' but never defined
autogenerated:90: warning: 'void print_control_mode()' declared 'static' but never defined
autogenerated:92: warning: 'void print_position()' declared 'static' but never defined
autogenerated:96: warning: 'void print_waypoint(Location*, byte)' declared 'static' but never defined
autogenerated:97: warning: 'void print_waypoints()' declared 'static' but never defined
autogenerated:70: warning: 'long int convert_to_dec(float)' declared 'static' but never defined
autogenerated:139: warning: 'void Log_Write_Optflow()' declared 'static' but never defined
autogenerated:150: warning: 'void decrement_WP_index()' declared 'static' but never defined
/root/apm/ardupilot-mega/ArduCopter/commands.pde:149: warning: 'Location get_LOITER_home_wp()' defined but not used
/root/apm/ardupilot-mega/ArduCopter/commands_logic.pde:301: warning: 'void do_loiter_turns()' defined but not used
/root/apm/ardupilot-mega/ArduCopter/commands_logic.pde:427: warning: 'bool verify_loiter_unlim()' defined but not used
autogenerated:109: warning: 'void Log_Write_Optflow()' declared 'static' but never defined
autogenerated:90: warning: 'void Log_Write_Attitude2()' declared 'static' but never defined
autogenerated:91: warning: 'void Log_Read_Attitude2()' declared 'static' but never defined
autogenerated:121: warning: 'void decrement_WP_index()' declared 'static' but never defined
/root/apm/ardupilot-mega/ArduCopter/commands.pde:132: warning: 'Location get_LOITER_home_wp()' defined but not used
/root/apm/ardupilot-mega/ArduCopter/commands_logic.pde:432: warning: 'bool verify_loiter_unlim()' defined but not used
/root/apm/ardupilot-mega/ArduCopter/events.pde:46: warning: 'void low_battery_event()' defined but not used
autogenerated:235: warning: 'void debug_motors()' declared 'static' but never defined
autogenerated:250: warning: 'void calc_altitude_smoothing_error()' declared 'static' but never defined
/root/apm/ardupilot-mega/ArduCopter/navigation.pde:159: warning: 'int get_loiter_angle()' defined but not used
/root/apm/ardupilot-mega/ArduCopter/navigation.pde:217: warning: 'void reset_crosstrack()' defined but not used
/root/apm/ardupilot-mega/ArduCopter/navigation.pde:222: warning: 'long int get_altitude_above_home()' defined but not used
/root/apm/ardupilot-mega/ArduCopter/navigation.pde:243: warning: 'long int get_alt_distance(Location*, Location*)' defined but not used
/root/apm/ardupilot-mega/ArduCopter/radio.pde:131: warning: 'void throttle_failsafe(uint16_t)' defined but not used
/root/apm/ardupilot-mega/ArduCopter/radio.pde:188: warning: 'void trim_yaw()' defined but not used
autogenerated:268: warning: 'void readCommands()' declared 'static' but never defined
autogenerated:269: warning: 'void parseCommand(char*)' declared 'static' but never defined
autogenerated:213: warning: 'void debug_motors()' declared 'static' but never defined
/root/apm/ardupilot-mega/ArduCopter/navigation.pde:183: warning: 'int get_loiter_angle()' defined but not used
autogenerated:234: warning: 'long int get_crosstrack_correction()' declared 'static' but never defined
autogenerated:235: warning: 'long int cross_track_test()' declared 'static' but never defined
autogenerated:236: warning: 'void reset_crosstrack()' declared 'static' but never defined
autogenerated:238: warning: 'long int get_alt_distance(Location*, Location*)' declared 'static' but never defined
/root/apm/ardupilot-mega/ArduCopter/radio.pde:130: warning: 'void throttle_failsafe(uint16_t)' defined but not used
/root/apm/ardupilot-mega/ArduCopter/sensors.pde:6: warning: 'void ReadSCP1000()' defined but not used
autogenerated:272: warning: 'long int read_baro_filtered()' declared 'static' but never defined
autogenerated:248: warning: 'long int read_baro_filtered()' declared 'static' but never defined
/root/apm/ardupilot-mega/ArduCopter/sensors.pde:95: warning: 'void read_airspeed()' defined but not used
/root/apm/ardupilot-mega/ArduCopter/sensors.pde:100: warning: 'void zero_airspeed()' defined but not used
/root/apm/ardupilot-mega/ArduCopter/system.pde:465: warning: 'void set_failsafe(boolean)' defined but not used
autogenerated:311: warning: 'void init_optflow()' declared 'static' but never defined
autogenerated:319: warning: 'void fake_out_gps()' declared 'static' but never defined
/root/apm/ardupilot-mega/ArduCopter/test.pde:991: warning: 'void print_motor_out()' defined but not used
/root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:283: warning: 'heli_servo_min' defined but not used
/root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:283: warning: 'heli_servo_max' defined but not used
/root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:284: warning: 'heli_servo_out' defined but not used
/root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:443: warning: 'undo_event' defined but not used
/root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:449: warning: 'condition_rate' defined but not used
/root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:463: warning: 'simple_WP' defined but not used
/root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:468: warning: 'optflow_offset' defined but not used
/root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:469: warning: 'new_location' defined but not used
/root/apm/ardupilot-mega/ArduCopter/heli.pde:6: warning: 'rollPitch_impact_on_collective' defined but not used
/root/apm/ardupilot-mega/ArduCopter/system.pde:434: warning: 'void set_failsafe(boolean)' defined but not used
autogenerated:285: warning: 'void init_optflow()' declared 'static' but never defined
autogenerated:292: warning: 'void fake_out_gps()' declared 'static' but never defined
/root/apm/ardupilot-mega/ArduCopter/test.pde:1028: warning: 'void print_motor_out()' defined but not used
/root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:277: warning: 'heli_servo_min' defined but not used
/root/apm/ardupilot-mega/ArduCopter/ArduCopter.pde:277: warning: 'heli_servo_max' defined but not used
/root/apm/ardupilot-mega/ArduCopter/GCS_Mavlink.pde:1706: warning: 'void gcs_send_text_fmt(const prog_char_t*, ...)' defined but not used
%% libraries/APM_BMP085/APM_BMP085.o
%% libraries/APM_BMP085/APM_BMP085_hil.o
%% libraries/APM_PI/APM_PI.o
%% libraries/APM_RC/APM_RC.o
%% libraries/AP_ADC/AP_ADC_ADS7844.o
@ -88,38 +73,13 @@ autogenerated:319: warning: 'void fake_out_gps()' declared 'static' but never de
%% libraries/AP_IMU/AP_IMU_Oilpan.o
%% libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.o
In file included from /root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp:28:
/usr/local/share/arduino/libraries/SPI/../SPI/SPI.h:25:1: warning: "SPI_CLOCK_DIV64" redefined
/usr/local/share/arduino/libraries/SPI/../SPI/SPI.h:20:1: warning: this is the location of the previous definition
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp: In member function 'void AP_OpticalFlow_ADNS3080::set_led_always_on(bool)':
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp:221: warning: suggest parentheses around arithmetic in operand of |
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp: In member function 'bool AP_OpticalFlow_ADNS3080::get_frame_rate_auto()':
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp:257: warning: suggest parentheses around comparison in operand of &
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp: In member function 'void AP_OpticalFlow_ADNS3080::set_shutter_speed_auto(bool)':
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp:361: warning: suggest parentheses around arithmetic in operand of |
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp: In member function 'unsigned int AP_OpticalFlow_ADNS3080::set_shutter_speed(unsigned int)':
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp:408: warning: no return statement in function returning non-void
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp: In member function 'int AP_OpticalFlow_ADNS3080::print_pixel_data(Stream*)':
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp:441: warning: suggest parentheses around comparison in operand of &
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp:456: warning: no return statement in function returning non-void
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp:456: warning: control reaches end of non-void function
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp: In member function 'unsigned int AP_OpticalFlow_ADNS3080::set_shutter_speed(unsigned int)':
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp:408: warning: control reaches end of non-void function
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp: In member function 'virtual bool AP_OpticalFlow_ADNS3080::init(bool)':
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp:80: warning: control reaches end of non-void function
/usr/local/share/arduino/libraries/SPI/SPI.h:25:1: warning: "SPI_CLOCK_DIV64" redefined
/usr/local/share/arduino/libraries/SPI/SPI.h:20:1: warning: this is the location of the previous definition
%% libraries/AP_OpticalFlow/AP_OpticalFlow.o
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow.cpp: In member function 'virtual int AP_OpticalFlow::read()':
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow.cpp:38: warning: no return statement in function returning non-void
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow.cpp: In member function 'virtual byte AP_OpticalFlow::read_register(byte)':
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow.cpp:44: warning: no return statement in function returning non-void
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow.cpp: In member function 'virtual void AP_OpticalFlow::get_position(float, float, float, float)':
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow.cpp:88: warning: unused variable 'i'
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow.cpp: In member function 'virtual byte AP_OpticalFlow::read_register(byte)':
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow.cpp:44: warning: control reaches end of non-void function
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow.cpp: In member function 'virtual int AP_OpticalFlow::read()':
/root/apm/ardupilot-mega/libraries/AP_OpticalFlow/AP_OpticalFlow.cpp:38: warning: control reaches end of non-void function
%% libraries/AP_RangeFinder/AP_RangeFinder_MaxsonarXL.o
%% libraries/AP_RangeFinder/AP_RangeFinder_SharpGP2Y.o
%% libraries/AP_RangeFinder/RangeFinder.o
%% libraries/AP_Relay/AP_Relay.o
%% libraries/DataFlash/DataFlash.o
In file included from /root/apm/ardupilot-mega/libraries/DataFlash/DataFlash.cpp:35:
/usr/local/share/arduino/libraries/SPI/SPI.h:25:1: warning: "SPI_CLOCK_DIV64" redefined
@ -129,6 +89,7 @@ In file included from /root/apm/ardupilot-mega/libraries/DataFlash/DataFlash.cpp
%% libraries/FastSerial/vprintf.o
%% libraries/GCS_MAVLink/GCS_MAVLink.o
%% libraries/ModeFilter/ModeFilter.o
%% libraries/RC_Channel/RC_Channel_aux.o
%% libraries/RC_Channel/RC_Channel.o
%% libraries/memcheck/memcheck.o
%% libraries/FastSerial/ftoa_engine.o

View File

@ -4,19 +4,19 @@
00000001 b motor_armed
00000001 b motor_light
00000001 b control_mode
00000001 b gps_watchdog
00000001 b simple_timer
00000001 d yaw_tracking
00000001 b land_complete
00000001 b throttle_mode
00000001 b command_may_ID
00000001 b wp_verify_byte
00000001 b xtrack_enabled
00000001 d altitude_sensor
00000001 b command_must_ID
00000001 b command_yaw_dir
00000001 b new_radio_frame
00000001 b roll_pitch_mode
00000001 b counter_one_herz
00000001 b delta_ms_fiftyhz
00000001 b did_ground_start
00000001 b in_mavlink_delay
00000001 b invalid_throttle
@ -27,48 +27,51 @@
00000001 b command_may_index
00000001 b oldSwitchPosition
00000001 b command_must_index
00000001 b delta_ms_fast_loop
00000001 d ground_start_count
00000001 b medium_loopCounter
00000001 b command_yaw_relative
00000001 b delta_ms_medium_loop
00000001 d jump
00000001 b event_id
00000001 b led_mode
00000001 b yaw_mode
00000001 b GPS_light
00000001 b alt_timer
00000001 b loop_step
00000001 b do_simple
00000001 b trim_flag
00000001 b dancing_light()::step
00000001 b update_motor_leds()::blink
00000001 b radio_input_switch()::bouncer
00000001 b read_control_switch()::switch_debouncer
00000001 d GCS_MAVLINK::handleMessage(__mavlink_message*)::mav_nav
00000001 B mavdelay
00000002 T mavlink_acknowledge(mavlink_channel_t, unsigned char, unsigned char, unsigned char)
00000001 B relay
00000002 T userhook_50Hz()
00000002 T userhook_init()
00000002 b climb_rate
00000002 b loiter_sum
00000002 b event_delay
00000002 b event_value
00000002 b event_repeat
00000002 b loiter_total
00000002 b nav_throttle
00000002 b x_rate_error
00000002 b y_rate_error
00000002 b altitude_rate
00000002 b gps_fix_count
00000002 b velocity_land
00000002 b mainLoop_count
00000002 b x_actual_speed
00000002 b y_actual_speed
00000002 b loiter_time_max
00000002 b command_yaw_time
00000002 b event_undo_value
00000002 b command_yaw_speed
00000002 b auto_level_counter
00000002 b ground_temperature
00000002 b waypoint_speed_gov
00000002 b heli_manual_override
00000002 b heli_servo_out_count
00000002 b superslow_loopCounter
00000002 r comma
00000002 b g_gps
00000002 b G_Dt_max
00000002 b airspeed
00000002 b baro_alt
00000002 b sonar_alt
00000002 T GCS_MAVLINK::acknowledge(unsigned char, unsigned char, unsigned char)
00000002 b arm_motors()::arming_counter
00000002 r setup_frame(unsigned char, Menu::arg const*)::__c
00000002 r setup_frame(unsigned char, Menu::arg const*)::__c
@ -77,11 +80,6 @@
00000002 r test_wp(unsigned char, Menu::arg const*)::__c
00000002 V APM_PI::APM_PI(unsigned int, prog_char_t const*, float const&, float const&, int const&)::__c
00000002 V APM_PI::APM_PI(unsigned int, prog_char_t const*, float const&, float const&, int const&)::__c
00000002 B adc
00000002 B x_actual_speed
00000002 B x_rate_error
00000002 B y_actual_speed
00000002 B y_rate_error
00000003 r setup_gyro(unsigned char, Menu::arg const*)::__c
00000003 r select_logs(unsigned char, Menu::arg const*)::__c
00000003 r setup_sonar(unsigned char, Menu::arg const*)::__c
@ -94,16 +92,15 @@
00000004 d cos_pitch_x
00000004 b event_timer
00000004 b loiter_time
00000004 b nav_bearing
00000004 d scaleLongUp
00000004 b sin_pitch_y
00000004 b wp_distance
00000004 b abs_pressure
00000004 b circle_angle
00000004 b current_amps
00000004 b old_altitude
00000004 b original_alt
00000004 b bearing_error
00000004 b simple_cos_x
00000004 b simple_sin_y
00000004 b current_total
00000004 b nav_loopTimer
00000004 d scaleLongDown
@ -117,24 +114,21 @@
00000004 b condition_start
00000004 b condition_value
00000004 b ground_pressure
00000004 b loiter_time_max
00000004 b target_altitude
00000004 d battery_voltage1
00000004 d battery_voltage2
00000004 d battery_voltage3
00000004 d battery_voltage4
00000004 b medium_loopTimer
00000004 b wp_totalDistance
00000004 b command_yaw_delta
00000004 b command_yaw_start
00000004 b fiftyhz_loopTimer
00000004 b crosstrack_bearing
00000004 b fast_loopTimeStamp
00000004 b old_target_bearing
00000004 b throttle_integrator
00000004 b saved_target_bearing
00000004 r __menu_name__log_menu
00000004 b command_yaw_start_time
00000004 b initial_simple_bearing
00000004 b original_target_bearing
00000004 d G_Dt
00000004 b dTnav
00000004 b nav_lat
@ -155,9 +149,8 @@
00000004 r select_logs(unsigned char, Menu::arg const*)::__c
00000004 r select_logs(unsigned char, Menu::arg const*)::__c
00000004 r setup_sonar(unsigned char, Menu::arg const*)::__c
00000004 r print_switch(unsigned char, unsigned char, bool)::__c
00000004 b mavlink_delay(unsigned long)::last_1hz
00000004 b mavlink_delay(unsigned long)::last_3hz
00000004 b mavlink_delay(unsigned long)::last_10hz
00000004 b mavlink_delay(unsigned long)::last_50hz
00000004 r print_enabled(unsigned char)::__c
00000004 r setup_compass(unsigned char, Menu::arg const*)::__c
@ -175,6 +168,7 @@
00000005 r select_logs(unsigned char, Menu::arg const*)::__c
00000005 r select_logs(unsigned char, Menu::arg const*)::__c
00000005 r Log_Read_Raw()::__c
00000005 r print_switch(unsigned char, unsigned char, bool)::__c
00000005 r Log_Read_Mode()::__c
00000005 r report_tuning()::__c
00000005 r print_log_menu()::__c
@ -223,6 +217,8 @@
00000007 r test_wp(unsigned char, Menu::arg const*)::__c
00000007 V Parameters::Parameters()::__c
00000007 V Parameters::Parameters()::__c
00000007 V Parameters::Parameters()::__c
00000007 V Parameters::Parameters()::__c
00000007 r GCS_MAVLINK::GCS_MAVLINK(unsigned int)::__c
00000007 r GCS_MAVLINK::GCS_MAVLINK(unsigned int)::__c
00000007 r GCS_MAVLINK::GCS_MAVLINK(unsigned int)::__c
@ -230,6 +226,7 @@
00000008 r __menu_name__planner_menu
00000008 r select_logs(unsigned char, Menu::arg const*)::__c
00000008 r report_tuning()::__c
00000008 r init_ardupilot()::__c
00000008 r print_log_menu()::__c
00000008 r report_batt_monitor()::__c
00000008 r report_batt_monitor()::__c
@ -239,9 +236,11 @@
00000008 V Parameters::Parameters()::__c
00000008 V Parameters::Parameters()::__c
00000008 V Parameters::Parameters()::__c
00000008 V Parameters::Parameters()::__c
00000008 V Parameters::Parameters()::__c
00000008 r GCS_MAVLINK::GCS_MAVLINK(unsigned int)::__c
00000009 r report_gyro()::__c
00000009 r print_switch(unsigned char, unsigned char)::__c
00000009 r print_switch(unsigned char, unsigned char, bool)::__c
00000009 r print_log_menu()::__c
00000009 r print_log_menu()::__c
00000009 r report_compass()::__c
@ -269,17 +268,19 @@
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 V Parameters::Parameters()::__c
00000009 r GCS_MAVLINK::GCS_MAVLINK(unsigned int)::__c
00000009 r GCS_MAVLINK::GCS_MAVLINK(unsigned int)::__c
00000009 r GCS_MAVLINK::GCS_MAVLINK(unsigned int)::__c
00000009 r GCS_MAVLINK::GCS_MAVLINK(unsigned int)::__c
0000000a T piezo_on()
0000000a T piezo_off()
0000000a r test_relay(unsigned char, Menu::arg const*)::__c
0000000a r start_new_log()::__c
0000000a r print_log_menu()::__c
0000000a r Log_Read_Startup()::__c
0000000a r test_wp(unsigned char, Menu::arg const*)::__c
0000000a r test_mag(unsigned char, Menu::arg const*)::__c
0000000a V Parameters::Parameters()::__c
0000000a V Parameters::Parameters()::__c
0000000a V Parameters::Parameters()::__c
0000000a V Parameters::Parameters()::__c
@ -295,15 +296,16 @@
0000000c b heli_pitchFactor
0000000c b omega
0000000c t test_mode(unsigned char, Menu::arg const*)
0000000c T GCS_MAVLINK::send_text(unsigned char, char const*)
0000000c T GCS_MAVLINK::send_text(gcs_severity, char const*)
0000000c V vtable for IMU
0000000c r print_switch(unsigned char, unsigned char, bool)::__c
0000000c r report_frame()::__c
0000000c r setup_factory(unsigned char, Menu::arg const*)::__c
0000000c r test_baro(unsigned char, Menu::arg const*)::__c
0000000c V Parameters::Parameters()::__c
0000000c V Parameters::Parameters()::__c
0000000c V Parameters::Parameters()::__c
0000000c V Parameters::Parameters()::__c
0000000d r verify_RTL()::__c
0000000d r select_logs(unsigned char, Menu::arg const*)::__c
0000000d r test_tuning(unsigned char, Menu::arg const*)::__c
0000000d r test_battery(unsigned char, Menu::arg const*)::__c
@ -319,6 +321,7 @@
0000000d B sonar_mode_filter
0000000e t global destructors keyed to Serial
0000000e t global constructors keyed to Serial
0000000e t send_statustext(mavlink_channel_t)
0000000e V vtable for AP_Float16
0000000e V vtable for AP_VarA<float, (unsigned char)6>
0000000e V vtable for AP_VarS<Matrix3<float> >
@ -365,22 +368,23 @@
0000000f r report_batt_monitor()::__c
0000000f r test_imu(unsigned char, Menu::arg const*)::__c
0000000f V AP_IMU_Oilpan::AP_IMU_Oilpan(AP_ADC*, unsigned int)::__c
00000010 b heli_servo_out
00000010 r planner_menu_commands
00000010 b motor_out
00000010 T GCS_MAVLINK::send_message(ap_message)
00000010 W AP_VarT<float>::cast_to_float() const
00000010 r test_sonar(unsigned char, Menu::arg const*)::__c
00000010 r report_gyro()::__c
00000010 r report_heli()::__c
00000010 r report_compass()::__c
00000010 t mavlink_get_channel_status
00000011 r erase_logs(unsigned char, Menu::arg const*)::__c
00000011 r setup_heli(unsigned char, Menu::arg const*)::__c
00000011 r zero_eeprom()::__c
00000011 r update_commands()::__c
00000011 r Log_Read_Attitude()::__c
00000012 B Serial
00000012 B Serial1
00000012 B Serial3
00000012 t gcs_update()
00000012 r flight_mode_strings
00000012 W AP_Float16::~AP_Float16()
00000012 W AP_VarA<float, (unsigned char)6>::~AP_VarA()
@ -397,6 +401,8 @@
00000012 r GCS_MAVLINK::handleMessage(__mavlink_message*)::__c
00000013 r setup_heli(unsigned char, Menu::arg const*)::__c
00000013 r setup_heli(unsigned char, Menu::arg const*)::__c
00000013 r setup_heli(unsigned char, Menu::arg const*)::__c
00000013 r report_heli()::__c
00000013 r report_heli()::__c
00000013 r report_heli()::__c
00000013 r report_heli()::__c
@ -410,23 +416,21 @@
00000014 r setup_heli(unsigned char, Menu::arg const*)::__c
00000014 r setup_sonar(unsigned char, Menu::arg const*)::__c
00000014 r test_tri(unsigned char, Menu::arg const*)::__c
00000015 r map_baudrate(signed char, unsigned long)::__c
00000015 r setup_heli(unsigned char, Menu::arg const*)::__c
00000015 r init_ardupilot()::__c
00000015 r Log_Read_Motors()::__c
00000015 r print_hit_enter()::__c
00000015 r GCS_MAVLINK::handleMessage(__mavlink_message*)::__c
00000016 T piezo_beep()
00000016 r setup_heli(unsigned char, Menu::arg const*)::__c
00000016 r init_ardupilot()::__c
00000016 r GCS_MAVLINK::update()::__c
00000016 B sonar
00000017 r __menu_name__main_menu
00000018 t setup_tune(unsigned char, Menu::arg const*)
00000018 t setup_accel(unsigned char, Menu::arg const*)
00000018 r __menu_name__main_menu
00000018 W AP_VarT<int>::serialize(void*, unsigned int) const
00000018 b mavlink_get_channel_status::m_mavlink_status
00000019 r setup_gyro(unsigned char, Menu::arg const*)::__c
00000019 r GCS_MAVLINK::update()::__c
0000001a r print_log_menu()::__c
0000001a r Log_Read_Nav_Tuning()::__c
0000001b r setup_heli(unsigned char, Menu::arg const*)::__c
0000001b r report_heli()::__c
0000001c W AP_VarA<float, (unsigned char)6>::unserialize(void*, unsigned int)
@ -436,19 +440,21 @@
0000001c W AP_VarA<float, (unsigned char)6>::serialize(void*, unsigned int) const
0000001c W AP_VarS<Matrix3<float> >::serialize(void*, unsigned int) const
0000001c W AP_VarS<Vector3<float> >::serialize(void*, unsigned int) const
0000001d r Log_Read_Attitude()::__c
0000001e r report_heli()::__c
0000001e r Log_Read_Optflow()::__c
0000001e r Log_Read_Nav_Tuning()::__c
0000001f r test_mag(unsigned char, Menu::arg const*)::__c
00000020 t gcs_send_message(ap_message)
00000020 r test_current(unsigned char, Menu::arg const*)::__c
00000020 t byte_swap_4
00000021 r setup_heli(unsigned char, Menu::arg const*)::__c
00000021 r print_log_menu()::__c
00000021 r report_compass()::__c
00000021 r Log_Read_Current()::__c
00000021 r Log_Read_Performance()::__c
00000022 t clear_leds()
00000022 t print_blanks(int)
00000022 t reset_hold_I()
00000022 t startup_ground()
00000022 W AP_Float16::~AP_Float16()
00000022 W AP_VarA<float, (unsigned char)6>::~AP_VarA()
00000022 W AP_VarS<Matrix3<float> >::~AP_VarS()
@ -459,16 +465,13 @@
00000023 r setup_heli(unsigned char, Menu::arg const*)::__c
00000023 r setup_mode(unsigned char, Menu::arg const*)::__c
00000023 r print_gyro_offsets()::__c
00000024 t startup_ground()
00000024 r setup_heli(unsigned char, Menu::arg const*)::__c
00000024 r init_ardupilot()::__c
00000024 r print_accel_offsets()::__c
00000025 r setup_factory(unsigned char, Menu::arg const*)::__c
00000026 t print_done()
00000026 b mavlink_queue
00000026 t print_hit_enter()
00000026 t Log_Read_Startup()
00000027 r test_xbee(unsigned char, Menu::arg const*)::__c
00000026 r Log_Read_Control_Tuning()::__c
00000028 t test_battery(unsigned char, Menu::arg const*)
00000028 t main_menu_help(unsigned char, Menu::arg const*)
00000028 t help_log(unsigned char, Menu::arg const*)
@ -479,90 +482,94 @@
00000029 r setup_mode(unsigned char, Menu::arg const*)::__c
00000029 r test_gps(unsigned char, Menu::arg const*)::__c
0000002a t setup_declination(unsigned char, Menu::arg const*)
0000002a r Log_Read_Control_Tuning()::__c
0000002b r planner_mode(unsigned char, Menu::arg const*)::__c
0000002e t setup_motors(unsigned char, Menu::arg const*)
0000002e t print_divider()
0000002e t send_rate(unsigned int, unsigned int)
0000002e t gcs_send_text_P(gcs_severity, prog_char_t const*)
0000002e t gcs_data_stream_send(unsigned int, unsigned int)
0000002e W AP_Var_group::AP_Var_group(unsigned int, prog_char_t const*, unsigned char)
0000002e r Log_Read_Performance()::__c
0000002f r test_radio(unsigned char, Menu::arg const*)::__c
0000002f r init_ardupilot()::__c
00000030 t planner_mode(unsigned char, Menu::arg const*)
00000032 T GCS_MAVLINK::init(BetterStream*)
00000030 t send_heartbeat(mavlink_channel_t)
00000031 r setup_heli(unsigned char, Menu::arg const*)::__c
00000032 T GCS_MAVLINK::init(FastSerial*)
00000032 W APM_PI::~APM_PI()
00000032 r setup_heli(unsigned char, Menu::arg const*)::__c
00000032 r Log_Read_GPS()::__c
00000033 b pending_status
00000034 t heli_get_servo(int)
00000034 W AP_Float16::serialize(void*, unsigned int) const
00000034 t _mav_put_int8_t_array
00000034 t mavlink_msg_statustext_send
00000035 r test_radio_pwm(unsigned char, Menu::arg const*)::__c
00000036 t report_radio()
00000036 r Log_Read_GPS()::__c
00000037 r print_wp(Location*, unsigned char)::__c
00000038 t init_throttle_cruise()
00000038 t send_current_waypoint(mavlink_channel_t)
00000038 r setup_radio(unsigned char, Menu::arg const*)::__c
00000038 r setup_factory(unsigned char, Menu::arg const*)::__c
0000003a t report_gps()
0000003a t report_imu()
0000003c W RC_Channel::~RC_Channel()
0000003d B g_gps_driver
0000003e t verify_RTL()
0000003e T GCS_MAVLINK::send_text(unsigned char, prog_char_t const*)
0000003e T GCS_MAVLINK::send_text(gcs_severity, prog_char_t const*)
0000003e W AP_VarT<signed char>::AP_VarT(signed char, unsigned int, prog_char_t const*, unsigned char)
00000040 t read_AHRS()
00000040 W AP_Float16::unserialize(void*, unsigned int)
00000040 B adc
00000040 t byte_swap_8
00000040 t crc_accumulate
00000042 T output_min()
00000042 t report_sonar()
00000042 r setup_heli(unsigned char, Menu::arg const*)::__c
00000044 W AP_VarT<int>::AP_VarT(int, unsigned int, prog_char_t const*, unsigned char)
00000048 t change_command(unsigned char)
00000048 t update_motor_leds()
00000049 r setup_flightmodes(unsigned char, Menu::arg const*)::__c
0000004a t send_meminfo(mavlink_channel_t)
0000004a W AP_VarT<int>::AP_VarT(AP_Var_group*, unsigned int, int, prog_char_t const*, unsigned char)
0000004c t setup_show(unsigned char, Menu::arg const*)
0000004c t update_auto_yaw()
0000004c B imu
0000004e T mavlink_send_text(mavlink_channel_t, unsigned char, char const*)
00000050 b mavlink_queue
00000050 t report_version()
00000050 r log_menu_commands
00000050 r main_menu_commands
00000050 t read_AHRS()
00000050 T GCS_MAVLINK::_find_parameter(unsigned int)
00000052 t change_command(unsigned char)
00000050 B imu
00000054 t print_enabled(unsigned char)
00000054 t update_motor_leds()
00000054 t report_flight_modes()
00000055 r main_menu_help(unsigned char, Menu::arg const*)::__c
00000055 r setup_flightmodes(unsigned char, Menu::arg const*)::__c
00000056 t readSwitch()
00000056 t dancing_light()
00000056 T GCS_MAVLINK::queued_waypoint_send()
00000057 r help_log(unsigned char, Menu::arg const*)::__c
00000058 t Log_Write_Attitude()
0000005a t report_frame()
0000005a t read_control_switch()
0000005a W AP_VarT<float>::AP_VarT(float, unsigned int, prog_char_t const*, unsigned char)
0000005c t get_num_logs()
0000005c t setup_esc(unsigned char, Menu::arg const*)
0000005e t update_GPS_light()
0000005e t radio_input_switch()
0000005e T GCS_MAVLINK::_count_parameters()
0000005f r setup_heli(unsigned char, Menu::arg const*)::__c
00000060 t print_switch(unsigned char, unsigned char)
00000060 t _mavlink_send_uart
00000060 B barometer
00000064 t test_xbee(unsigned char, Menu::arg const*)
00000064 B barometer
00000064 t mavlink_msg_param_value_send
00000068 t zero_eeprom()
00000068 t find_last_log_page(int)
0000006a T mavlink_send_text(mavlink_channel_t, gcs_severity, char const*)
0000006a t read_num_from_serial()
0000006a W GCS_MAVLINK::~GCS_MAVLINK()
0000006c t setup_sonar(unsigned char, Menu::arg const*)
00000074 t output_motors_armed()
00000078 t setup_batt_monitor(unsigned char, Menu::arg const*)
00000078 t do_RTL()
0000007a t setup_factory(unsigned char, Menu::arg const*)
0000007a t read_control_switch()
0000007a t report_flight_modes()
0000007a t test_baro(unsigned char, Menu::arg const*)
0000007c t send_gps_status(mavlink_channel_t)
0000007e t test_rawgps(unsigned char, Menu::arg const*)
00000080 T __vector_25
00000080 T __vector_36
00000080 T __vector_54
00000082 t do_RTL()
00000086 t Log_Read_Attitude()
00000082 t Log_Write_Attitude()
00000088 t Log_Read_Raw()
0000008c t setup_frame(unsigned char, Menu::arg const*)
0000008c t print_gyro_offsets()
@ -571,100 +578,112 @@
00000090 t report_gyro()
00000090 t report_tuning()
00000092 t test_tuning(unsigned char, Menu::arg const*)
00000095 r init_ardupilot()::__c
00000096 t map_baudrate(signed char, unsigned long)
00000092 T GCS_MAVLINK::queued_param_send()
00000096 t print_wp(Location*, unsigned char)
0000009a t planner_gcs(unsigned char, Menu::arg const*)
0000009a t init_compass()
0000009a t Log_Read_Motors()
0000009d B gcs
0000009d B hil
0000009b B gcs0
0000009b B gcs3
0000009e t setup_mode(unsigned char, Menu::arg const*)
0000009e t Log_Read_Mode()
0000009e t Log_Write_Cmd(unsigned char, Location*)
000000a4 T __vector_26
000000a4 T __vector_37
000000a4 T __vector_55
000000a6 t send_servo_out(mavlink_channel_t)
000000a8 t test_sonar(unsigned char, Menu::arg const*)
000000b0 t read_radio()
000000aa t Log_Read_Nav_Tuning()
000000b0 t test_relay(unsigned char, Menu::arg const*)
000000b2 t erase_logs(unsigned char, Menu::arg const*)
000000b4 t test_relay(unsigned char, Menu::arg const*)
000000b4 t planner_gcs(unsigned char, Menu::arg const*)
000000b4 t read_radio()
000000b6 t get_log_boundaries(unsigned char, int&, int&)
000000b7 B compass
000000be t Log_Read_Nav_Tuning()
000000be t update_events()
000000c2 t test_eedump(unsigned char, Menu::arg const*)
000000c2 t setup_compass(unsigned char, Menu::arg const*)
000000c2 t send_radio_out(mavlink_channel_t)
000000c2 t Log_Read_Attitude()
000000c4 t get_distance(Location*, Location*)
000000c4 t update_events()
000000c4 r setup_esc(unsigned char, Menu::arg const*)::__c
000000c6 t Log_Read(int, int)
000000c6 t send_radio_in(mavlink_channel_t)
000000c6 t Log_Read_Performance()
000000c6 t test_tri(unsigned char, Menu::arg const*)
000000c7 B dcm
000000ca t init_barometer()
000000d0 t get_bearing(Location*, Location*)
000000d0 t print_switch(unsigned char, unsigned char, bool)
000000d4 t get_stabilize_roll(long)
000000d4 t get_stabilize_pitch(long)
000000d4 t Log_Read(int, int)
000000d8 t test_radio(unsigned char, Menu::arg const*)
000000d8 t read_barometer()
000000dc t test_adc(unsigned char, Menu::arg const*)
000000de t Log_Read_Performance()
000000de t Log_Read_Control_Tuning()
000000e0 b mavlink_parse_char::m_mavlink_message
000000e4 t test_radio_pwm(unsigned char, Menu::arg const*)
000000e4 t Log_Read_Optflow()
000000e4 W APM_PI::APM_PI(unsigned int, prog_char_t const*, float const&, float const&, int const&)
000000e6 t setup_flightmodes(unsigned char, Menu::arg const*)
000000e8 t Log_Read_Current()
000000ea t Log_Read_Control_Tuning()
000000ee t report_batt_monitor()
000000f4 t _mav_finalize_message_chan_send
000000f6 t Log_Read_Cmd()
000000fa t calc_nav_pitch_roll()
00000100 r test_menu_commands
00000100 r setup_menu_commands
00000108 t setup_gyro(unsigned char, Menu::arg const*)
0000010a t mavlink_delay(unsigned long)
0000010a t send_raw_imu2(mavlink_channel_t)
0000010a t test_gps(unsigned char, Menu::arg const*)
0000010c W RC_Channel::RC_Channel(unsigned int, prog_char_t const*)
00000112 t test_current(unsigned char, Menu::arg const*)
0000010c t test_current(unsigned char, Menu::arg const*)
0000010e W RC_Channel::RC_Channel(unsigned int, prog_char_t const*)
00000112 t set_next_WP(Location*)
00000112 t send_extended_status1(mavlink_channel_t, unsigned int)
00000112 T GCS_MAVLINK::GCS_MAVLINK(unsigned int)
00000112 T GCS_MAVLINK::GCS_MAVLINK(unsigned int)
00000118 t set_command_with_index(Location, int)
00000118 T GCS_MAVLINK::_queued_send()
00000120 r test_menu_commands
00000128 t get_command_with_index(int)
0000011c t get_command_with_index(int)
0000012c t calc_loiter_pitch_roll()
00000130 t report_compass()
00000134 T GCS_MAVLINK::send_message(unsigned char, unsigned long)
0000014e T GCS_MAVLINK::update()
00000150 t update_trig()
00000152 t set_next_WP(Location*)
00000156 t Log_Read_GPS()
00000148 t Log_Read_GPS()
00000156 t update_commands()
0000015c t update_trig()
00000160 t send_location(mavlink_channel_t)
00000160 t send_nav_controller_output(mavlink_channel_t)
00000162 T GCS_MAVLINK::data_stream_send(unsigned int, unsigned int)
00000166 t select_logs(unsigned char, Menu::arg const*)
0000016c t update_commands()
00000170 t test_mag(unsigned char, Menu::arg const*)
00000172 t update_nav_wp()
000001a0 t init_home()
00000166 t send_vfr_hud(mavlink_channel_t)
00000168 T GCS_MAVLINK::update()
0000016c t test_imu(unsigned char, Menu::arg const*)
0000016e t send_attitude(mavlink_channel_t)
00000174 t mavlink_send_message(mavlink_channel_t, ap_message, unsigned int)
000001a2 t mavlink_try_send_message(mavlink_channel_t, ap_message, unsigned int)
000001a8 t print_radio_values()
000001b8 t test_imu(unsigned char, Menu::arg const*)
000001be T GCS_MAVLINK::data_stream_send(unsigned int, unsigned int)
000001ca t arm_motors()
000001ca t mavlink_delay(unsigned long)
000001ce t start_new_log()
00000202 t set_mode(unsigned char)
000001be t arm_motors()
000001cc t start_new_log()
000001e4 t verify_nav_wp()
000001e4 t setup_flightmodes(unsigned char, Menu::arg const*)
000001ea t init_home()
00000216 t set_mode(unsigned char)
0000021a t send_raw_imu1(mavlink_channel_t)
0000021c t test_wp(unsigned char, Menu::arg const*)
00000228 t setup_radio(unsigned char, Menu::arg const*)
000002b8 t heli_init_swash()
000002d0 t report_heli()
000002ea t tuning()
00000330 t calc_nav_rate(int, int, int, int)
00000358 T update_throttle_mode()
00000368 t heli_move_swash(int, int, int, int)
0000022a t send_gps_raw(mavlink_channel_t)
00000242 t calc_loiter(int, int)
00000268 t send_raw_imu3(mavlink_channel_t)
0000030c t heli_init_swash()
00000312 W Parameters::~Parameters()
00000328 t report_heli()
00000330 t tuning()
00000382 t print_log_menu()
000003be t read_battery()
0000042a T update_yaw_mode()
000004b2 t mavlink_parse_char
00000556 T update_roll_pitch_mode()
00000632 t init_ardupilot()
00000718 t setup_heli(unsigned char, Menu::arg const*)
00000818 t __static_initialization_and_destruction_0(int, int)
000008e4 t process_next_command()
0000097a W Parameters::Parameters()
000009ad b g
000011d8 T GCS_MAVLINK::handleMessage(__mavlink_message*)
000017ac t mavlink_try_send_message(mavlink_channel_t, unsigned char, unsigned int)
00001af4 T loop
0000039a T update_throttle_mode()
000003a0 t read_battery()
0000045c T update_yaw_mode()
0000046e T update_roll_pitch_mode()
0000052e t heli_move_swash(int, int, int, int)
000005cc t __static_initialization_and_destruction_0(int, int)
0000063e t init_ardupilot()
0000071a t update_nav_wp()
000007e8 t setup_heli(unsigned char, Menu::arg const*)
00000870 t process_next_command()
000009b4 W Parameters::Parameters()
00000a1f b g
000012ec T GCS_MAVLINK::handleMessage(__mavlink_message*)
0000158a T loop

View File

@ -1,12 +1,5 @@
<?xml version="1.0" encoding="utf-8" ?>
<options>
<Firmware>
<url>http://ardupilot-mega.googlecode.com/git/Tools/ArdupilotMegaPlanner/Firmware/crap-1280.hex</url>
<url2560>http://ardupilot-mega.googlecode.com/git/Tools/ArdupilotMegaPlanner/Firmware/crap-2560.hex</url2560>
<name>Please Update</name>
<desc></desc>
<format_version>0</format_version>
</Firmware>
<Firmware>
<url>http://ardupilot-mega.googlecode.com/git/Tools/ArdupilotMegaPlanner/Firmware/AP-1280.hex</url>
<url2560>http://ardupilot-mega.googlecode.com/git/Tools/ArdupilotMegaPlanner/Firmware/AP-2560.hex</url2560>
@ -102,7 +95,7 @@
<Firmware>
<url>http://ardupilot-mega.googlecode.com/git/Tools/ArdupilotMegaPlanner/Firmware/AC2-Heli-1280.hex</url>
<url2560>http://ardupilot-mega.googlecode.com/git/Tools/ArdupilotMegaPlanner/Firmware/AC2-Heli-2560.hex</url2560>
<name>ArduCopter V2.0.43 Beta Heli (2560 only)</name>
<name>ArduCopter V2.0.49 Beta Heli (2560 only)</name>
<desc>
#define AUTO_RESET_LOITER 0
#define FRAME_CONFIG HELI_FRAME
@ -143,7 +136,7 @@
#define NAV_LOITER_IMAX 10
</desc>
<format_version>108</format_version>
<format_version>111</format_version>
</Firmware>
<Firmware>
<url>http://ardupilot-mega.googlecode.com/git/Tools/ArdupilotMegaPlanner/Firmware/AC2-QUADHIL-1280.hex</url>
@ -161,9 +154,9 @@
<format_version>110</format_version>
</Firmware>
<Firmware>
<url>http://ardupilot-mega.googlecode.com/git/Tools/ArdupilotMegaPlanner/Firmware/AC2-HELIHIL-1280.hex</url>
<url2560>http://ardupilot-mega.googlecode.com/git/Tools/ArdupilotMegaPlanner/Firmware/AC2-HELIHIL-2560.hex</url2560>
<name>Please Update</name>
<url>http://ardupilot-mega.googlecode.com/git/Tools/ArdupilotMegaPlanner/Firmware/AC2-HELHIL-1280.hex</url>
<url2560>http://ardupilot-mega.googlecode.com/git/Tools/ArdupilotMegaPlanner/Firmware/AC2-HELHIL-2560.hex</url2560>
<name>ArduCopter V2.0.49 Beta Heli Hil</name>
<desc>
#define HIL_MODE HIL_MODE_ATTITUDE
@ -209,6 +202,6 @@
</desc>
<format_version>0</format_version>
<format_version>111</format_version>
</Firmware>
</options>

View File

@ -1 +1,26 @@
Already up-to-date.
From https://code.google.com/p/ardupilot-mega
6a8104d..b4f49d1 APM_Camera -> origin/APM_Camera
d5ab678..7f6c49b master -> origin/master
Updating d5ab678..7f6c49b
Fast-forward
ArduCopter/APM_Config.h | 19 ++++++
ArduCopter/ArduCopter.pde | 48 +++++++++++++--
ArduCopter/Camera.pde | 11 ++-
ArduCopter/Parameters.h | 15 ++++-
ArduCopter/UserCode.pde | 15 +++++
ArduCopter/UserVariables.h | 13 ++++
ArduCopter/config.h | 14 ++++-
ArduCopter/control_modes.pde | 19 ++++---
ArduCopter/heli.pde | 49 ++++++++++------
ArduCopter/navigation.pde | 26 ++++++--
ArduCopter/radio.pde | 8 ---
ArduCopter/read_commands.pde | 112 ------------------------------------
ArduCopter/setup.pde | 6 +-
ArduCopter/system.pde | 11 +---
ArduCopter/test.pde | 2 +-
libraries/Desktop/Desktop.mk | 18 +++---
libraries/Desktop/Makefile.desktop | 5 +-
17 files changed, 198 insertions(+), 193 deletions(-)
create mode 100644 ArduCopter/UserCode.pde
create mode 100644 ArduCopter/UserVariables.h
delete mode 100644 ArduCopter/read_commands.pde

View File

@ -171,7 +171,7 @@ else
endif
# these are library objects we don't want in the desktop build (maybe we'll add them later)
NODESKTOP := FastSerial/FastSerial.cpp AP_Compass/AP_Compass_HMC5843.cpp APM_BMP085/APM_BMP085.cpp AP_IMU/AP_IMU_Oilpan.cpp AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp
NODESKTOP := FastSerial/FastSerial.cpp AP_Compass/AP_Compass_HMC5843.cpp APM_BMP085/APM_BMP085.cpp AP_IMU/AP_IMU_Oilpan.cpp AP_OpticalFlow/AP_OpticalFlow_ADNS3080.cpp RC_Channel/RC_Channel_aux.cpp
#
# Find sketchbook libraries referenced by the sketch.

View File

@ -22,3 +22,6 @@ hilnocli:
heli:
make -f $(DESKTOP)/Makefile.desktop EXTRAFLAGS="-DFRAME_CONFIG=HELI_FRAME"
helihil:
make -f $(DESKTOP)/Makefile.desktop EXTRAFLAGS="-DFRAME_CONFIG=HELI_FRAME -DHIL_MODE=HIL_MODE_ATTITUDE -DCLI_ENABLED=DISABLED -DLOGGING_ENABLED=DISABLED"