Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

AP_Compass: drop MMC5xx3 sample rate to 100Hz 

this was consuming too much of the I2C bus sampling at 1kHz
This commit is contained in:
Andrew Tridgell 2023-03-06 21:20:14 +11:00 committed by Willian Galvani
parent 94ba4ece5f
commit 0a4dc4722c
1 changed files with 9 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
libraries/AP_Compass/AP_Compass_MMC5xx3.cpp
View File

@ -99,9 +99,10 @@ bool AP_Compass_MMC5XX3::init()
// 10ms minimum startup time
hal.scheduler->delay(15);
if (!dev->write_register(REG_CONTROL1, REG_CONTROL1_BW0 | REG_CONTROL1_BW1)) {
// setup for 100Hz output
if (!dev->write_register(REG_CONTROL1, 0)) {
return false;
} // // This BW config sets the sensor measurement time to 0.5ms and filter bandwidth to 800Hz
}
/* register the compass instance in the frontend */
@ -122,8 +123,8 @@ bool AP_Compass_MMC5XX3::init()
dev->set_retries(1);
// call timer() at 1kHz
dev->register_periodic_callback(1000,
// call timer() at 100Hz
dev->register_periodic_callback(10000U,
FUNCTOR_BIND_MEMBER(&AP_Compass_MMC5XX3::timer, void));
return true;
@ -132,10 +133,10 @@ bool AP_Compass_MMC5XX3::init()
void AP_Compass_MMC5XX3::timer()
{
// recalculate the offset with set/reset operation every measure_count_limit measurements
// sensor is read at about 500Hz, so about every 10 seconds
const uint16_t measure_count_limit = 5000;
const uint16_t zero_offset = 32768; // 16 bit mode
const uint16_t sensitivity = 4096; // counts per Gauss, 16 bit mode
// sensor is read at about 100Hz, so about every 10 seconds
const uint16_t measure_count_limit = 1000U;
const uint16_t zero_offset = 32768U; // 16 bit mode
const uint16_t sensitivity = 4096U; // counts per Gauss, 16 bit mode
constexpr float counts_to_milliGauss = 1.0e3f / sensitivity;
/*