RC_Channel: add AUX switch to pause logging of streamed entries

This commit is contained in:
Henry Wurzburg 2022-07-26 18:41:04 -05:00 committed by Andrew Tridgell
parent a395b3d2a8
commit 022987e4d3
2 changed files with 24 additions and 4 deletions

View File

@ -98,10 +98,10 @@ const AP_Param::GroupInfo RC_Channel::var_info[] = {
// @Param: OPTION // @Param: OPTION
// @DisplayName: RC input option // @DisplayName: RC input option
// @Description: Function assigned to this RC channel // @Description: Function assigned to this RC channel
// @Values{Copter}: 0:Do Nothing, 2:Flip, 3:Simple Mode, 4:RTL, 5:Save Trim, 7:Save WP, 9:Camera Trigger, 10:RangeFinder, 11:Fence, 13:Super Simple Mode, 14:Acro Trainer, 15:Sprayer, 16:Auto, 17:AutoTune, 18:Land, 19:Gripper, 21:Parachute Enable, 22:Parachute Release, 23:Parachute 3pos, 24:Auto Mission Reset, 25:AttCon Feed Forward, 26:AttCon Accel Limits, 27:Retract Mount, 28:Relay On/Off, 29:Landing Gear, 30:Lost Copter Sound, 31:Motor Emergency Stop, 32:Motor Interlock, 33:Brake, 34:Relay2 On/Off, 35:Relay3 On/Off, 36:Relay4 On/Off, 37:Throw, 38:ADSB Avoidance En, 39:PrecLoiter, 40:Proximity Avoidance, 41:ArmDisarm (4.1 and lower), 42:SmartRTL, 43:InvertedFlight, 46:RC Override Enable, 47:User Function 1, 48:User Function 2, 49:User Function 3, 52:Acro, 55:Guided, 56:Loiter, 57:Follow, 58:Clear Waypoints, 60:ZigZag, 61:ZigZag SaveWP, 62:Compass Learn, 65:GPS Disable, 66:Relay5 On/Off, 67:Relay6 On/Off, 68:Stabilize, 69:PosHold, 70:AltHold, 71:FlowHold, 72:Circle, 73:Drift, 75:SurfaceTrackingUpDown, 76:Standby Mode, 78:RunCam Control, 79:RunCam OSD Control, 80:VisOdom Align, 81:Disarm, 83:ZigZag Auto, 84:Air Mode, 85:Generator, 90:EKF Pos Source, 94:VTX Power, 99:AUTO RTL, 100:KillIMU1, 101:KillIMU2, 102:Camera Mode Toggle, 105:GPS Disable Yaw, 151:Turtle, 152:simple heading reset, 153:ArmDisarm (4.2 and higher), 154:ArmDisarm with AirMode (4.2 and higher), 158:Optflow Calibration, 159:Force Flying, 161:Turbine Start(heli), 162:FFT Tune, 163:Mount Lock, 300:Scripting1, 301:Scripting2, 302:Scripting3, 303:Scripting4, 304:Scripting5, 305:Scripting6, 306:Scripting7, 307:Scripting8 // @Values{Copter}: 0:Do Nothing, 2:Flip, 3:Simple Mode, 4:RTL, 5:Save Trim, 7:Save WP, 9:Camera Trigger, 10:RangeFinder, 11:Fence, 13:Super Simple Mode, 14:Acro Trainer, 15:Sprayer, 16:Auto, 17:AutoTune, 18:Land, 19:Gripper, 21:Parachute Enable, 22:Parachute Release, 23:Parachute 3pos, 24:Auto Mission Reset, 25:AttCon Feed Forward, 26:AttCon Accel Limits, 27:Retract Mount, 28:Relay On/Off, 29:Landing Gear, 30:Lost Copter Sound, 31:Motor Emergency Stop, 32:Motor Interlock, 33:Brake, 34:Relay2 On/Off, 35:Relay3 On/Off, 36:Relay4 On/Off, 37:Throw, 38:ADSB Avoidance En, 39:PrecLoiter, 40:Proximity Avoidance, 41:ArmDisarm (4.1 and lower), 42:SmartRTL, 43:InvertedFlight, 46:RC Override Enable, 47:User Function 1, 48:User Function 2, 49:User Function 3, 52:Acro, 55:Guided, 56:Loiter, 57:Follow, 58:Clear Waypoints, 60:ZigZag, 61:ZigZag SaveWP, 62:Compass Learn, 65:GPS Disable, 66:Relay5 On/Off, 67:Relay6 On/Off, 68:Stabilize, 69:PosHold, 70:AltHold, 71:FlowHold, 72:Circle, 73:Drift, 75:SurfaceTrackingUpDown, 76:Standby Mode, 78:RunCam Control, 79:RunCam OSD Control, 80:VisOdom Align, 81:Disarm, 83:ZigZag Auto, 84:Air Mode, 85:Generator, 90:EKF Pos Source, 94:VTX Power, 99:AUTO RTL, 100:KillIMU1, 101:KillIMU2, 102:Camera Mode Toggle, 105:GPS Disable Yaw, 151:Turtle, 152:simple heading reset, 153:ArmDisarm (4.2 and higher), 154:ArmDisarm with AirMode (4.2 and higher), 158:Optflow Calibration, 159:Force Flying, 161:Turbine Start(heli), 162:FFT Tune, 163:Mount Lock, 164:Pause Stream Logging, 300:Scripting1, 301:Scripting2, 302:Scripting3, 303:Scripting4, 304:Scripting5, 305:Scripting6, 306:Scripting7, 307:Scripting8
// @Values{Rover}: 0:Do Nothing, 4:RTL, 5:Save Trim (4.1 and lower), 7:Save WP, 9:Camera Trigger, 11:Fence, 16:Auto, 19:Gripper, 24:Auto Mission Reset, 27:Retract Mount, 28:Relay On/Off, 30:Lost Rover Sound, 31:Motor Emergency Stop, 34:Relay2 On/Off, 35:Relay3 On/Off, 36:Relay4 On/Off, 40:Proximity Avoidance, 41:ArmDisarm (4.1 and lower), 42:SmartRTL, 46:RC Override Enable, 50:LearnCruise, 51:Manual, 52:Acro, 53:Steering, 54:Hold, 55:Guided, 56:Loiter, 57:Follow, 58:Clear Waypoints, 59:Simple Mode, 62:Compass Learn, 63:Sailboat Tack, 65:GPS Disable, 66:Relay5 On/Off, 67:Relay6 On/Off, 74:Sailboat motoring 3pos, 78:RunCam Control, 79:RunCam OSD Control, 80:Viso Align, 81:Disarm, 90:EKF Pos Source, 94:VTX Power, 97:Windvane home heading direction offset, 100:KillIMU1, 101:KillIMU2, 102:Camera Mode Toggle, 105:GPS Disable Yaw, 106:Disable Airspeed Use, 153:ArmDisarm (4.2 and higher), 155: set steering trim to current servo and RC, 156:Torqeedo Clear Err, 162:FFT Tune, 163:Mount Lock, 201:Roll, 202:Pitch, 207:MainSail, 208:Flap, 211:Walking Height, 300:Scripting1, 301:Scripting2, 302:Scripting3, 303:Scripting4, 304:Scripting5, 305:Scripting6, 306:Scripting7, 307:Scripting8 // @Values{Rover}: 0:Do Nothing, 4:RTL, 5:Save Trim (4.1 and lower), 7:Save WP, 9:Camera Trigger, 11:Fence, 16:Auto, 19:Gripper, 24:Auto Mission Reset, 27:Retract Mount, 28:Relay On/Off, 30:Lost Rover Sound, 31:Motor Emergency Stop, 34:Relay2 On/Off, 35:Relay3 On/Off, 36:Relay4 On/Off, 40:Proximity Avoidance, 41:ArmDisarm (4.1 and lower), 42:SmartRTL, 46:RC Override Enable, 50:LearnCruise, 51:Manual, 52:Acro, 53:Steering, 54:Hold, 55:Guided, 56:Loiter, 57:Follow, 58:Clear Waypoints, 59:Simple Mode, 62:Compass Learn, 63:Sailboat Tack, 65:GPS Disable, 66:Relay5 On/Off, 67:Relay6 On/Off, 74:Sailboat motoring 3pos, 78:RunCam Control, 79:RunCam OSD Control, 80:Viso Align, 81:Disarm, 90:EKF Pos Source, 94:VTX Power, 97:Windvane home heading direction offset, 100:KillIMU1, 101:KillIMU2, 102:Camera Mode Toggle, 105:GPS Disable Yaw, 106:Disable Airspeed Use, 153:ArmDisarm (4.2 and higher), 155: set steering trim to current servo and RC, 156:Torqeedo Clear Err, 162:FFT Tune, 163:Mount Lock, 164:Pause Stream Logging, 201:Roll, 202:Pitch, 207:MainSail, 208:Flap, 211:Walking Height, 300:Scripting1, 301:Scripting2, 302:Scripting3, 303:Scripting4, 304:Scripting5, 305:Scripting6, 306:Scripting7, 307:Scripting8
// @Values{Plane}: 0:Do Nothing, 4:ModeRTL, 9:Camera Trigger, 11:Fence, 16:ModeAuto, 22:Parachute Release, 24:Auto Mission Reset, 27:Retract Mount, 28:Relay On/Off, 29:Landing Gear, 30:Lost Plane Sound, 31:Motor Emergency Stop, 34:Relay2 On/Off, 35:Relay3 On/Off, 36:Relay4 On/Off, 38:ADSB Avoidance En, 41:ArmDisarm (4.1 and lower), 43:InvertedFlight, 46:RC Override Enable, 51:ModeManual, 52: ModeACRO, 55:ModeGuided, 56:ModeLoiter, 58:Clear Waypoints, 62:Compass Learn, 64:Reverse Throttle, 65:GPS Disable, 66:Relay5 On/Off, 67:Relay6 On/Off, 72:ModeCircle, 77:ModeTakeoff, 78:RunCam Control, 79:RunCam OSD Control, 81:Disarm, 82:QAssist 3pos, 84:Air Mode, 85:Generator, 86: Non Auto Terrain Follow Disable, 87:Crow Select, 88:Soaring Enable, 89:Landing Flare, 90:EKF Pos Source, 91:Airspeed Ratio Calibration, 92:FBWA, 94:VTX Power, 95:FBWA taildragger takeoff mode, 96:trigger re-reading of mode switch, 98: ModeTraining, 100:KillIMU1, 101:KillIMU2, 102:Camera Mode Toggle, 105:GPS Disable Yaw, 106:Disable Airspeed Use, 107: EnableFixedWingAutotune, 108: ModeQRTL, 150: CRUISE, 153:ArmDisarm (4.2 and higher), 154:ArmDisarm with Quadplane AirMode (4.2 and higher), 155: set roll pitch and yaw trim to current servo and RC, 157: Force FS Action to FBWA, 158:Optflow Calibration, 160:Weathervane Enable, 162:FFT Tune, 163:Mount Lock, 208:Flap, 209: Forward Throttle, 300:Scripting1, 301:Scripting2, 302:Scripting3, 303:Scripting4, 304:Scripting5, 305:Scripting6, 306:Scripting7, 307:Scripting8 // @Values{Plane}: 0:Do Nothing, 4:ModeRTL, 9:Camera Trigger, 11:Fence, 16:ModeAuto, 22:Parachute Release, 24:Auto Mission Reset, 27:Retract Mount, 28:Relay On/Off, 29:Landing Gear, 30:Lost Plane Sound, 31:Motor Emergency Stop, 34:Relay2 On/Off, 35:Relay3 On/Off, 36:Relay4 On/Off, 38:ADSB Avoidance En, 41:ArmDisarm (4.1 and lower), 43:InvertedFlight, 46:RC Override Enable, 51:ModeManual, 52: ModeACRO, 55:ModeGuided, 56:ModeLoiter, 58:Clear Waypoints, 62:Compass Learn, 64:Reverse Throttle, 65:GPS Disable, 66:Relay5 On/Off, 67:Relay6 On/Off, 72:ModeCircle, 77:ModeTakeoff, 78:RunCam Control, 79:RunCam OSD Control, 81:Disarm, 82:QAssist 3pos, 84:Air Mode, 85:Generator, 86: Non Auto Terrain Follow Disable, 87:Crow Select, 88:Soaring Enable, 89:Landing Flare, 90:EKF Pos Source, 91:Airspeed Ratio Calibration, 92:FBWA, 94:VTX Power, 95:FBWA taildragger takeoff mode, 96:trigger re-reading of mode switch, 98: ModeTraining, 100:KillIMU1, 101:KillIMU2, 102:Camera Mode Toggle, 105:GPS Disable Yaw, 106:Disable Airspeed Use, 107: EnableFixedWingAutotune, 108: ModeQRTL, 150: CRUISE, 153:ArmDisarm (4.2 and higher), 154:ArmDisarm with Quadplane AirMode (4.2 and higher), 155: set roll pitch and yaw trim to current servo and RC, 157: Force FS Action to FBWA, 158:Optflow Calibration, 160:Weathervane Enable, 162:FFT Tune, 163:Mount Lock, 164:Pause Stream Logging, 208:Flap, 209: Forward Throttle, 300:Scripting1, 301:Scripting2, 302:Scripting3, 303:Scripting4, 304:Scripting5, 305:Scripting6, 306:Scripting7, 307:Scripting8
// @Values{Blimp}: 0:Do Nothing, 18:Land, 46:RC Override Enable, 65:GPS Disable, 81:Disarm, 90:EKF Pos Source, 100:KillIMU1, 101:KillIMU2, 153:ArmDisarm // @Values{Blimp}: 0:Do Nothing, 18:Land, 46:RC Override Enable, 65:GPS Disable, 81:Disarm, 90:EKF Pos Source, 100:KillIMU1, 101:KillIMU2, 153:ArmDisarm, 164:Pause Stream Logging
// @User: Standard // @User: Standard
AP_GROUPINFO_FRAME("OPTION", 6, RC_Channel, option, 0, AP_PARAM_FRAME_COPTER|AP_PARAM_FRAME_ROVER|AP_PARAM_FRAME_PLANE|AP_PARAM_FRAME_BLIMP), AP_GROUPINFO_FRAME("OPTION", 6, RC_Channel, option, 0, AP_PARAM_FRAME_COPTER|AP_PARAM_FRAME_ROVER|AP_PARAM_FRAME_PLANE|AP_PARAM_FRAME_BLIMP),
@ -524,6 +524,8 @@ void RC_Channel::init_aux_function(const aux_func_t ch_option, const AuxSwitchPo
case AUX_FUNC::RETRACT_MOUNT: case AUX_FUNC::RETRACT_MOUNT:
case AUX_FUNC::MOUNT_LOCK: case AUX_FUNC::MOUNT_LOCK:
#endif #endif
case AUX_FUNC::LOG_PAUSE:
run_aux_function(ch_option, ch_flag, AuxFuncTriggerSource::INIT); run_aux_function(ch_option, ch_flag, AuxFuncTriggerSource::INIT);
break; break;
default: default:
@ -584,6 +586,7 @@ const RC_Channel::LookupTable RC_Channel::lookuptable[] = {
{ AUX_FUNC::TURBINE_START, "Turbine Start"}, { AUX_FUNC::TURBINE_START, "Turbine Start"},
{ AUX_FUNC::FFT_NOTCH_TUNE, "FFT Notch Tuning"}, { AUX_FUNC::FFT_NOTCH_TUNE, "FFT Notch Tuning"},
{ AUX_FUNC::MOUNT_LOCK, "MountLock"}, { AUX_FUNC::MOUNT_LOCK, "MountLock"},
{ AUX_FUNC::LOG_PAUSE, "Pause Stream Logging"},
}; };
/* lookup the announcement for switch change */ /* lookup the announcement for switch change */
@ -1231,6 +1234,22 @@ bool RC_Channel::do_aux_function(const aux_func_t ch_option, const AuxSwitchPos
break; break;
} }
case AUX_FUNC::LOG_PAUSE: {
AP_Logger *logger = AP_Logger::get_singleton();
switch (ch_flag) {
case AuxSwitchPos::LOW:
logger->log_pause(false);
break;
case AuxSwitchPos::MIDDLE:
// nothing
break;
case AuxSwitchPos::HIGH:
logger->log_pause(true);
break;
}
break;
}
case AUX_FUNC::EKF_LANE_SWITCH: case AUX_FUNC::EKF_LANE_SWITCH:
// used to test emergency lane switch // used to test emergency lane switch
AP::ahrs().check_lane_switch(); AP::ahrs().check_lane_switch();

View File

@ -227,6 +227,7 @@ public:
TURBINE_START = 161, // initialize turbine start sequence TURBINE_START = 161, // initialize turbine start sequence
FFT_NOTCH_TUNE = 162, // FFT notch tuning function FFT_NOTCH_TUNE = 162, // FFT notch tuning function
MOUNT_LOCK = 163, // Mount yaw lock vs follow MOUNT_LOCK = 163, // Mount yaw lock vs follow
LOG_PAUSE = 164, // Pauses logging if under logging rate control
// inputs from 200 will eventually used to replace RCMAP // inputs from 200 will eventually used to replace RCMAP
ROLL = 201, // roll input ROLL = 201, // roll input