ardupilot/libraries/AP_Motors/AP_Motors_Class.cpp

// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
/*
   This program is free software: you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation, either version 3 of the License, or
   (at your option) any later version.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

/*
 *       AP_Motors.cpp - ArduCopter motors library
 *       Code by RandyMackay. DIYDrones.com
 *
 */

#include "AP_Motors_Class.h"
#include <AP_HAL/AP_HAL.h>
extern const AP_HAL::HAL& hal;

// Constructor
AP_Motors::AP_Motors(uint16_t loop_rate, uint16_t speed_hz) :
    _loop_rate(loop_rate),
    _speed_hz(speed_hz),
    _roll_in(0.0f),
    _pitch_in(0.0f),
    _yaw_in(0.0f),
    _throttle_in(0.0f),
    _throttle_filter(),
    _batt_voltage(0.0f),
    _batt_current(0.0f),
    _air_density_ratio(1.0f),
    _motor_map_mask(0)
{
    // init other flags
    _flags.armed = false;
    _flags.stabilizing = false;
    _flags.frame_orientation = AP_MOTORS_X_FRAME;
    _flags.interlock = false;

    // setup throttle filtering
    _throttle_filter.set_cutoff_frequency(0.0f);
    _throttle_filter.reset(0.0f);

    // init limit flags
    limit.roll_pitch = true;
    limit.yaw = true;
    limit.throttle_lower = true;
    limit.throttle_upper = true;
};

void AP_Motors::armed(bool arm)
{
    _flags.armed = arm;
    AP_Notify::flags.armed = arm;
};

/*
  write to an output channel
 */
void AP_Motors::rc_write(uint8_t chan, uint16_t pwm)
{
    if (_motor_map_mask & (1U<<chan)) {
        // we have a mapped motor number for this channel
        chan = _motor_map[chan];
    }
    hal.rcout->write(chan, pwm);
}

/*
  set frequency of a set of channels
 */
void AP_Motors::rc_set_freq(uint32_t mask, uint16_t freq_hz)
{
    hal.rcout->set_freq(rc_map_mask(mask), freq_hz);
}

void AP_Motors::rc_enable_ch(uint8_t chan)
{
    if (_motor_map_mask & (1U<<chan)) {
        // we have a mapped motor number for this channel
        chan = _motor_map[chan];
    }
    hal.rcout->enable_ch(chan);
}

/*
  map an internal motor mask to real motor mask
 */
uint32_t AP_Motors::rc_map_mask(uint32_t mask) const
{
    uint32_t mask2 = 0;
    for (uint8_t i=0; i<32; i++) {
        uint32_t bit = 1UL<<i;
        if (mask & bit) {
            if (_motor_map_mask & bit) {
                // we have a mapped motor number for this channel
                mask2 |= (1UL << _motor_map[i]);
            } else {
                mask2 |= bit;
            }
        }
    }
    return mask2;
}

// convert input in -1 to +1 range to pwm output
int16_t AP_Motors::calc_pwm_output_1to1(float input, const RC_Channel& servo)
{
    int16_t ret;

    input = constrain_float(input, -1.0f, 1.0f);

    if (servo.get_reverse()) {
        input = -input;
    }

    if (input >= 0.0f) {
        ret = ((input * (servo.radio_max - servo.radio_trim)) + servo.radio_trim);
    } else {
        ret = ((input * (servo.radio_trim - servo.radio_min)) + servo.radio_trim);
    }

    return constrain_int16(ret, servo.radio_min, servo.radio_max);
}

// convert input in 0 to +1 range to pwm output
int16_t AP_Motors::calc_pwm_output_0to1(float input, const RC_Channel& servo)
{
    int16_t ret;

    input = constrain_float(input, 0.0f, 1.0f);

    if (servo.get_reverse()) {
        input = 1.0f-input;
    }

    ret = input * (servo.radio_max - servo.radio_min) + servo.radio_min;

    return constrain_int16(ret, servo.radio_min, servo.radio_max);
}