mirror of https://github.com/ArduPilot/ardupilot
44 lines
1.4 KiB
Plaintext
44 lines
1.4 KiB
Plaintext
|
# hw definition file for processing by chibios_pins.py
|
||
|
|
|
||
|
|
include ../iomcu/hwdef.dat
|
||
|
|
|
||
|
|
undef AP_FASTBOOT_ENABLED AP_BOOTLOADER_FLASHING_ENABLED
|
||
|
|
undef HAL_DSHOT_ENABLED
|
||
|
|
|
||
|
|
# PPM uses a DMA channel that is required for TIM2, and no remapping of PA8 is possible
|
||
|
|
undef PA8
|
||
|
|
undef STM32_ICU_USE_TIM1 RCIN_ICU_TIMER STM32_RCIN_DMA_STREAM HAL_USE_ICU
|
||
|
|
undef PORT_INT_REQUIRED_STACK MAIN_STACK
|
||
|
|
undef CH_CFG_ST_TIMEDELTA CH_CFG_ST_FREQUENCY
|
||
|
|
|
||
|
|
define HAL_NO_LED_THREAD 1
|
||
|
|
|
||
|
|
# TIM2_UP required for PWM1/2
|
||
|
|
define STM32_TIM_TIM2_UP_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
|
||
|
|
define STM32_TIM_TIM2_UP_DMA_CHAN 1
|
||
|
|
|
||
|
|
# TIM4_UP (PWM 3/4) cannot be used as channels used by high speed USART2 RX/TX
|
||
|
|
# It's possible that DMA sharing might make this workable
|
||
|
|
#define STM32_TIM_TIM4_UP_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
|
||
|
|
#define STM32_TIM_TIM4_UP_DMA_CHAN 1
|
||
|
|
|
||
|
|
# TIM3_UP required for PWM5-8
|
||
|
|
define STM32_TIM_TIM3_UP_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
|
||
|
|
define STM32_TIM_TIM3_UP_DMA_CHAN 1
|
||
|
|
|
||
|
|
define NO_FASTBOOT
|
||
|
|
define HAL_WITH_DSP FALSE
|
||
|
|
define HAL_DSHOT_ENABLED TRUE
|
||
|
|
define HAL_SERIALLED_ENABLED FALSE
|
||
|
|
|
||
|
|
# Tickless mode is required in order for the virtual timers used by dshot to work correctly
|
||
|
|
STM32_ST_USE_TIMER 15
|
||
|
|
define CH_CFG_ST_RESOLUTION 16
|
||
|
|
define CH_CFG_ST_TIMEDELTA 2
|
||
|
|
define CH_CFG_ST_FREQUENCY 1000000
|
||
|
|
|
||
|
|
# ChibiOS already correctly sets stack sizes and considers 64 extra as conservative
|
||
|
|
define PORT_INT_REQUIRED_STACK 64
|
||
|
|
# "main" stack is only used for exceptions and ISR, but they can be nested
|
||
|
|
MAIN_STACK 0x100
|