2015-04-16 01:27:06 -03:00
/// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
/*
* tuning.pde - function to update various parameters in flight using the ch6 tuning knob
* This should not be confused with the AutoTune feature which can bve found in control_autotune.pde
*/
// tuning - updates parameters based on the ch6 tuning knob's position
// should be called at 3.3hz
static void tuning() {
// exit immediately if not tuning of when radio failsafe is invoked so tuning values are not set to zero
if ((g.radio_tuning <= 0) || failsafe.radio || failsafe.radio_counter != 0) {
return;
}
float tuning_value = (float)g.rc_6.control_in / 1000.0f;
g.rc_6.set_range(g.radio_tuning_low,g.radio_tuning_high);
2015-04-26 21:29:04 -03:00
Log_Write_Parameter_Tuning(g.radio_tuning, tuning_value, g.rc_6.control_in, g.radio_tuning_low, g.radio_tuning_high);
2015-04-16 01:27:06 -03:00
switch(g.radio_tuning) {
// Roll, Pitch tuning
2015-03-24 17:43:58 -03:00
case TUNING_STABILIZE_ROLL_PITCH_KP:
2015-04-16 01:27:06 -03:00
g.p_stabilize_roll.kP(tuning_value);
g.p_stabilize_pitch.kP(tuning_value);
break;
2015-03-24 17:43:58 -03:00
case TUNING_RATE_ROLL_PITCH_KP:
2015-04-16 01:27:06 -03:00
g.pid_rate_roll.kP(tuning_value);
g.pid_rate_pitch.kP(tuning_value);
break;
2015-03-24 17:43:58 -03:00
case TUNING_RATE_ROLL_PITCH_KI:
2015-04-16 01:27:06 -03:00
g.pid_rate_roll.kI(tuning_value);
g.pid_rate_pitch.kI(tuning_value);
break;
2015-03-24 17:43:58 -03:00
case TUNING_RATE_ROLL_PITCH_KD:
2015-04-16 01:27:06 -03:00
g.pid_rate_roll.kD(tuning_value);
g.pid_rate_pitch.kD(tuning_value);
break;
// Yaw tuning
2015-03-24 17:43:58 -03:00
case TUNING_STABILIZE_YAW_KP:
2015-04-16 01:27:06 -03:00
g.p_stabilize_yaw.kP(tuning_value);
break;
2015-03-24 17:43:58 -03:00
case TUNING_YAW_RATE_KP:
2015-04-16 01:27:06 -03:00
g.pid_rate_yaw.kP(tuning_value);
break;
2015-03-24 17:43:58 -03:00
case TUNING_YAW_RATE_KD:
2015-04-16 01:27:06 -03:00
g.pid_rate_yaw.kD(tuning_value);
break;
// Altitude and throttle tuning
2015-03-24 17:43:58 -03:00
case TUNING_ALTITUDE_HOLD_KP:
2015-04-16 01:27:06 -03:00
g.p_alt_hold.kP(tuning_value);
break;
2015-03-24 17:43:58 -03:00
case TUNING_THROTTLE_RATE_KP:
2015-04-16 01:27:06 -03:00
g.p_vel_z.kP(tuning_value);
break;
2015-03-24 17:43:58 -03:00
case TUNING_ACCEL_Z_KP:
2015-04-16 01:27:06 -03:00
g.pid_accel_z.kP(tuning_value);
break;
2015-03-24 17:43:58 -03:00
case TUNING_ACCEL_Z_KI:
2015-04-16 01:27:06 -03:00
g.pid_accel_z.kI(tuning_value);
break;
2015-03-24 17:43:58 -03:00
case TUNING_ACCEL_Z_KD:
2015-04-16 01:27:06 -03:00
g.pid_accel_z.kD(tuning_value);
break;
// Loiter and navigation tuning
2015-03-24 17:43:58 -03:00
case TUNING_LOITER_POSITION_KP:
2015-04-16 01:27:06 -03:00
g.p_pos_xy.kP(tuning_value);
break;
2015-03-24 17:43:58 -03:00
case TUNING_VEL_XY_KP:
2015-04-16 01:27:06 -03:00
g.pi_vel_xy.kP(tuning_value);
break;
2015-03-24 17:43:58 -03:00
case TUNING_VEL_XY_KI:
2015-04-16 01:27:06 -03:00
g.pi_vel_xy.kI(tuning_value);
break;
2015-03-24 17:43:58 -03:00
case TUNING_WP_SPEED:
2015-04-16 01:27:06 -03:00
// set waypoint navigation horizontal speed to 0 ~ 1000 cm/s
wp_nav.set_speed_xy(g.rc_6.control_in);
break;
// Acro roll pitch gain
2015-03-24 17:43:58 -03:00
case TUNING_ACRO_RP_KP:
2015-04-16 01:27:06 -03:00
g.acro_rp_p = tuning_value;
break;
// Acro yaw gain
2015-03-24 17:43:58 -03:00
case TUNING_ACRO_YAW_KP:
2015-04-16 01:27:06 -03:00
g.acro_yaw_p = tuning_value;
break;
#if FRAME_CONFIG == HELI_FRAME
2015-03-24 17:43:58 -03:00
case TUNING_HELI_EXTERNAL_GYRO:
2015-04-16 01:27:06 -03:00
motors.ext_gyro_gain(g.rc_6.control_in);
break;
2015-03-24 17:43:58 -03:00
case TUNING_RATE_PITCH_FF:
2015-04-16 01:27:06 -03:00
g.pid_rate_pitch.ff(tuning_value);
break;
2015-03-24 17:43:58 -03:00
case TUNING_RATE_ROLL_FF:
2015-04-16 01:27:06 -03:00
g.pid_rate_roll.ff(tuning_value);
break;
2015-03-24 17:43:58 -03:00
case TUNING_RATE_YAW_FF:
2015-04-16 01:27:06 -03:00
g.pid_rate_yaw.ff(tuning_value);
break;
#endif
2015-03-24 17:43:58 -03:00
case TUNING_DECLINATION:
2015-04-16 01:27:06 -03:00
// set declination to +-20degrees
compass.set_declination(ToRad((2.0f * g.rc_6.control_in - g.radio_tuning_high)/100.0f), false); // 2nd parameter is false because we do not want to save to eeprom because this would have a performance impact
break;
2015-03-24 17:43:58 -03:00
case TUNING_CIRCLE_RATE:
2015-04-16 01:27:06 -03:00
// set circle rate
circle_nav.set_rate(g.rc_6.control_in/25-20); // allow approximately 45 degree turn rate in either direction
break;
2015-03-24 17:43:58 -03:00
case TUNING_SONAR_GAIN:
2015-04-16 01:27:06 -03:00
// set sonar gain
g.sonar_gain.set(tuning_value);
break;
#if 0
// disabled for now - we need accessor functions
2015-03-24 17:43:58 -03:00
case TUNING_EKF_VERTICAL_POS:
2015-04-16 01:27:06 -03:00
// EKF's baro vs accel (higher rely on accels more, baro impact is reduced)
ahrs.get_NavEKF()._gpsVertPosNoise = tuning_value;
break;
2015-03-24 17:43:58 -03:00
case TUNING_EKF_HORIZONTAL_POS:
2015-04-16 01:27:06 -03:00
// EKF's gps vs accel (higher rely on accels more, gps impact is reduced)
ahrs.get_NavEKF()._gpsHorizPosNoise = tuning_value;
break;
2015-03-24 17:43:58 -03:00
case TUNING_EKF_ACCEL_NOISE:
2015-04-16 01:27:06 -03:00
// EKF's accel noise (lower means trust accels more, gps & baro less)
ahrs.get_NavEKF()._accNoise = tuning_value;
break;
#endif
2015-03-24 17:43:58 -03:00
case TUNING_RC_FEEL_RP:
2015-04-16 01:27:06 -03:00
// roll-pitch input smoothing
g.rc_feel_rp = g.rc_6.control_in / 10;
break;
2015-03-24 17:43:58 -03:00
case TUNING_RATE_PITCH_KP:
2015-04-16 01:27:06 -03:00
g.pid_rate_pitch.kP(tuning_value);
break;
2015-03-24 17:43:58 -03:00
case TUNING_RATE_PITCH_KI:
2015-04-16 01:27:06 -03:00
g.pid_rate_pitch.kI(tuning_value);
break;
2015-03-24 17:43:58 -03:00
case TUNING_RATE_PITCH_KD:
2015-04-16 01:27:06 -03:00
g.pid_rate_pitch.kD(tuning_value);
break;
2015-03-24 17:43:58 -03:00
case TUNING_RATE_ROLL_KP:
2015-04-16 01:27:06 -03:00
g.pid_rate_roll.kP(tuning_value);
break;
2015-03-24 17:43:58 -03:00
case TUNING_RATE_ROLL_KI:
2015-04-16 01:27:06 -03:00
g.pid_rate_roll.kI(tuning_value);
break;
2015-03-24 17:43:58 -03:00
case TUNING_RATE_ROLL_KD:
2015-04-16 01:27:06 -03:00
g.pid_rate_roll.kD(tuning_value);
break;
2015-03-24 17:43:58 -03:00
case TUNING_RATE_MOT_YAW_HEADROOM:
2015-04-16 01:27:06 -03:00
motors.set_yaw_headroom(tuning_value*1000);
break;
2015-03-24 17:43:58 -03:00
case TUNING_RATE_YAW_FILT:
2015-04-16 01:27:06 -03:00
g.pid_rate_yaw.filt_hz(tuning_value);
break;
}
}