mirror of https://github.com/ArduPilot/ardupilot
94 lines
2.3 KiB
C++
94 lines
2.3 KiB
C++
|
/*
|
||
|
|
* SPI3.cpp - SPI library using UART3 for Ardupilot Mega
|
||
|
|
* Code by Randy Mackay, DIYDrones.com
|
||
|
|
* but mostly based on standard Arduino SPI class by Cristian Maglie <c.maglie@bug.st>
|
||
|
|
*
|
||
|
|
* This library is free software; you can redistribute it and/or
|
||
|
|
* modify it under the terms of the GNU Lesser General Public
|
||
|
|
* License as published by the Free Software Foundation; either
|
||
|
|
* version 2.1 of the License, or (at your option) any later version.
|
||
|
|
*
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include "pins_arduino.h"
|
||
|
|
#include "SPI3.h"
|
||
|
|
|
||
|
|
SPI3Class SPI3;
|
||
|
|
bool SPI3Class::_initialised = false;
|
||
|
|
|
||
|
|
void SPI3Class::begin() {
|
||
|
|
|
||
|
|
// check if begin has been run already
|
||
|
|
if( _initialised ) {
|
||
|
|
return;
|
||
|
|
}
|
||
|
|
|
||
|
|
// Set direction register for SCK and MOSI pin.
|
||
|
|
pinMode(SPI3_SCK, OUTPUT);
|
||
|
|
pinMode(SPI3_MOSI, OUTPUT);
|
||
|
|
pinMode(SPI3_MISO, INPUT);
|
||
|
|
|
||
|
|
// Setup Serial Port3 in SPI mode (MSPI), Mode 0, Clock: 8Mhz
|
||
|
|
UBRR3 = 0;
|
||
|
|
DDRJ |= (1<<PJ2); // SPI clock XCK3 (PJ2) as output. This enable SPI Master mode
|
||
|
|
|
||
|
|
// put UART3 into SPI master mode, default mode and LSB bit order
|
||
|
|
UCSR3C = SPI3_USART_SPI_MASTER | SPI3_DEFAULT_MODE;
|
||
|
|
|
||
|
|
// Enable receiver and transmitter.
|
||
|
|
UCSR3B = (1<<RXEN3)|(1<<TXEN3);
|
||
|
|
|
||
|
|
// Set Baud rate
|
||
|
|
UBRR3 = SPI3_DEFAULT_SPEED; // SPI running at 2Mhz by default
|
||
|
|
|
||
|
|
// initialisation complete
|
||
|
|
_initialised = true;
|
||
|
|
}
|
||
|
|
|
||
|
|
// end - switch UART3 back to asyncronous UART
|
||
|
|
// Note: this is untested
|
||
|
|
void SPI3Class::end() {
|
||
|
|
uint8_t temp = UCSR3C;
|
||
|
|
|
||
|
|
// put UART3 into ASync UART mode
|
||
|
|
temp = (temp & ~SPI3_USART_MASK) | SPI3_USART_ASYNC_UART;
|
||
|
|
UCSR3C = temp;
|
||
|
|
|
||
|
|
// reinitialisation will be required
|
||
|
|
_initialised = false;
|
||
|
|
}
|
||
|
|
|
||
|
|
uint8_t SPI3Class::transfer(uint8_t data) {
|
||
|
|
/* Wait for empty transmit buffer */
|
||
|
|
while ( !( UCSR3A & (1<<UDRE3)) ) ;
|
||
|
|
|
||
|
|
/* Put data into buffer, sends the data */
|
||
|
|
UDR3 = data;
|
||
|
|
|
||
|
|
/* Wait for data to be received */
|
||
|
|
while ( !(UCSR3A & (1<<RXC3)) ) ;
|
||
|
|
|
||
|
|
/* Get and return received data from buffer */
|
||
|
|
return UDR3;
|
||
|
|
}
|
||
|
|
|
||
|
|
void SPI3Class::setBitOrder(uint8_t bitOrder)
|
||
|
|
{
|
||
|
|
if(bitOrder == SPI3_LSBFIRST) {
|
||
|
|
UCSR3C |= _BV(2);
|
||
|
|
} else {
|
||
|
|
UCSR3C &= ~(_BV(2));
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
void SPI3Class::setDataMode(uint8_t mode)
|
||
|
|
{
|
||
|
|
UCSR3C = (UCSR3C & ~SPI3_MODE_MASK) | mode;
|
||
|
|
}
|
||
|
|
|
||
|
|
void SPI3Class::setSpeed(uint8_t rate)
|
||
|
|
{
|
||
|
|
UBRR3 = rate;
|
||
|
|
}
|
||
|
|
|