Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
ardupilot/ArduPlane/Parameters.h

494 lines
20 KiB
C
Raw Normal View History

Small issue with newline formatting
2011-12-26 19:48:26 -04:00
// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
#ifndef PARAMETERS_H
#define PARAMETERS_H
#include <AP_Common.h>
// Global parameter class.
//
class Parameters {
public:
// The version of the layout as described by the parameter enum.
//
// When changing the parameter enum in an incompatible fashion, this
// value should be incremented by one.
//
// The increment will prevent old parameters from being used incorrectly
// by newer code.
//
static const uint16_t k_format_version = 12;
// The parameter software_type is set up solely for ground station use
// and identifies the software type (eg ArduPilotMega versus ArduCopterMega)
// GCS will interpret values 0-9 as ArduPilotMega. Developers may use
// values within that range to identify different branches.
//
static const uint16_t k_software_type = 0; // 0 for APM trunk
//
// Parameter identities.
//
// The enumeration defined here is used to ensure that every parameter
// or parameter group has a unique ID number. This number is used by
// AP_Var to store and locate parameters in EEPROM.
//
// Note that entries without a number are assigned the next number after
// the entry preceding them. When adding new entries, ensure that they
// don't overlap.
//
// Try to group related variables together, and assign them a set
// range in the enumeration. Place these groups in numerical order
// at the end of the enumeration.
//
// WARNING: Care should be taken when editing this enumeration as the
// AP_Var load/save code depends on the values here to identify
// variables saved in EEPROM.
//
//
enum {
// Layout version number, always key zero.
//
k_param_format_version = 0,
k_param_software_type,
// Misc
//
k_param_auto_trim,
k_param_switch_enable,
k_param_log_bitmask,
k_param_pitch_trim,
k_param_mix_mode,
k_param_reverse_elevons,
k_param_reverse_ch1_elevon,
k_param_reverse_ch2_elevon,
k_param_flap_1_percent,
k_param_flap_1_speed,
k_param_flap_2_percent,
k_param_flap_2_speed,
k_param_num_resets,
k_param_log_last_filenumber, // *** Deprecated - remove with next eeprom number change
k_param_reset_switch_chan,
// 110: Telemetry control
//
k_param_streamrates_port0 = 110,
k_param_streamrates_port3,
k_param_sysid_this_mav,
k_param_sysid_my_gcs,
k_param_serial3_baud,
// 120: Fly-by-wire control
//
k_param_flybywire_airspeed_min = 120,
k_param_flybywire_airspeed_max,
Tweak to FBW min altitude Patch from Yury
2011-12-31 18:44:40 -04:00
k_param_FBWB_min_altitude, // 0=disabled, minimum value for altitude in cm (for first time try 30 meters = 3000 cm)
Small issue with newline formatting
2011-12-26 19:48:26 -04:00
//
// 130: Sensor parameters
//
k_param_IMU_calibration = 130,
k_param_altitude_mix,
k_param_airspeed_ratio,
k_param_ground_temperature,
k_param_ground_pressure,
k_param_compass_enabled,
k_param_compass,
k_param_battery_monitoring,
k_param_volt_div_ratio,
k_param_curr_amp_per_volt,
k_param_input_voltage,
k_param_pack_capacity,
k_param_airspeed_offset,
k_param_sonar_enabled,
k_param_airspeed_enabled,
//
// 150: Navigation parameters
//
k_param_crosstrack_gain = 150,
k_param_crosstrack_entry_angle,
k_param_roll_limit,
k_param_pitch_limit_max,
k_param_pitch_limit_min,
k_param_airspeed_cruise,
k_param_RTL_altitude,
k_param_inverted_flight_ch,
k_param_min_gndspeed,
//
// 170: Radio settings
//
k_param_channel_roll = 170,
k_param_channel_pitch,
k_param_channel_throttle,
k_param_channel_yaw,
k_param_rc_5,
k_param_rc_6,
k_param_rc_7,
k_param_rc_8,
k_param_throttle_min,
k_param_throttle_max,
k_param_throttle_fs_enabled,
k_param_throttle_fs_value,
k_param_throttle_cruise,
k_param_short_fs_action,
k_param_long_fs_action,
k_param_gcs_heartbeat_fs_enabled,
k_param_throttle_slewrate,
//
// 200: Feed-forward gains
//
k_param_kff_pitch_compensation = 200,
k_param_kff_rudder_mix,
k_param_kff_pitch_to_throttle,
k_param_kff_throttle_to_pitch,
//
// 210: flight modes
//
k_param_flight_mode_channel = 210,
k_param_flight_mode1,
k_param_flight_mode2,
k_param_flight_mode3,
k_param_flight_mode4,
k_param_flight_mode5,
k_param_flight_mode6,
//
// 220: Waypoint data
//
k_param_waypoint_mode = 220,
k_param_command_total,
k_param_command_index,
k_param_waypoint_radius,
k_param_loiter_radius,
geofence: added geo-fencing control parameters
2011-12-15 03:08:58 -04:00
k_param_fence_action,
k_param_fence_total,
k_param_fence_channel,
k_param_fence_minalt,
k_param_fence_maxalt,
Small issue with newline formatting
2011-12-26 19:48:26 -04:00
//
// 240: PID Controllers
//
// Heading-to-roll PID:
// heading error from command to roll command deviation from trim
// (bank to turn strategy)
//
k_param_heading_to_roll_PID = 240,
// Roll-to-servo PID:
// roll error from command to roll servo deviation from trim
// (tracks commanded bank angle)
//
k_param_roll_to_servo_PID,
//
// Pitch control
//
// Pitch-to-servo PID:
// pitch error from command to pitch servo deviation from trim
// (front-side strategy)
//
k_param_pitch_to_servo_PID,
// Airspeed-to-pitch PID:
// airspeed error from command to pitch servo deviation from trim
// (back-side strategy)
//
k_param_airspeed_to_pitch_PID,
//
// Yaw control
//
// Yaw-to-servo PID:
// yaw rate error from command to yaw servo deviation from trim
// (stabilizes dutch roll)
//
k_param_yaw_to_servo_PID,
//
// Throttle control
//
// Energy-to-throttle PID:
// total energy error from command to throttle servo deviation from trim
// (throttle back-side strategy alternative)
//
k_param_energy_to_throttle_PID,
// Altitude-to-pitch PID:
// altitude error from command to pitch servo deviation from trim
// (throttle front-side strategy alternative)
//
k_param_altitude_to_pitch_PID,
// 254,255: reserved
};
AP_Int16 format_version;
AP_Int8 software_type;
// Telemetry control
//
AP_Int16 sysid_this_mav;
AP_Int16 sysid_my_gcs;
AP_Int8 serial3_baud;
// Feed-forward gains
//
AP_Float kff_pitch_compensation;
AP_Float kff_rudder_mix;
AP_Float kff_pitch_to_throttle;
AP_Float kff_throttle_to_pitch;
// Crosstrack navigation
//
AP_Float crosstrack_gain;
AP_Int16 crosstrack_entry_angle;
// Estimation
//
AP_Float altitude_mix;
AP_Float airspeed_ratio;
AP_Int16 airspeed_offset;
// Waypoints
//
AP_Int8 waypoint_mode;
AP_Int8 command_total;
geofence: main geo-fence code this implements the primary logic of geo-fencing
2011-12-15 03:09:29 -04:00
AP_Int8 command_index;
AP_Int8 waypoint_radius;
AP_Int8 loiter_radius;
#if GEOFENCE_ENABLED == ENABLED
geofence: added geo-fencing control parameters
2011-12-15 03:08:58 -04:00
AP_Int8 fence_action;
AP_Int8 fence_total;
AP_Int8 fence_channel;
AP_Int16 fence_minalt; // meters
AP_Int16 fence_maxalt; // meters
geofence: main geo-fence code this implements the primary logic of geo-fencing
2011-12-15 03:09:29 -04:00
#endif
// Fly-by-wire
//
Small issue with newline formatting
2011-12-26 19:48:26 -04:00
AP_Int8 flybywire_airspeed_min;
AP_Int8 flybywire_airspeed_max;
AP_Int16 FBWB_min_altitude;
// Throttle
//
AP_Int8 throttle_min;
AP_Int8 throttle_max;
AP_Int8 throttle_slewrate;
AP_Int8 throttle_fs_enabled;
AP_Int16 throttle_fs_value;
AP_Int8 throttle_cruise;
// Failsafe
AP_Int8 short_fs_action;
AP_Int8 long_fs_action;
AP_Int8 gcs_heartbeat_fs_enabled;
// Flight modes
//
AP_Int8 flight_mode_channel;
AP_Int8 flight_mode1;
AP_Int8 flight_mode2;
AP_Int8 flight_mode3;
AP_Int8 flight_mode4;
AP_Int8 flight_mode5;
AP_Int8 flight_mode6;
// Navigational maneuvering limits
//
AP_Int16 roll_limit;
AP_Int16 pitch_limit_max;
AP_Int16 pitch_limit_min;
// Misc
//
AP_Int8 auto_trim;
AP_Int8 switch_enable;
AP_Int8 mix_mode;
AP_Int8 reverse_elevons;
AP_Int8 reverse_ch1_elevon;
AP_Int8 reverse_ch2_elevon;
AP_Int16 num_resets;
AP_Int16 log_bitmask;
AP_Int16 log_last_filenumber; // *** Deprecated - remove with next eeprom number change
AP_Int8 reset_switch_chan;
AP_Int16 airspeed_cruise;
AP_Int16 min_gndspeed;
AP_Int16 pitch_trim;
AP_Int16 RTL_altitude;
AP_Int16 ground_temperature;
AP_Int32 ground_pressure;
AP_Int8 compass_enabled;
AP_Int16 angle_of_attack;
AP_Int8 battery_monitoring; // 0=disabled, 1=3 cell lipo, 2=4 cell lipo, 3=total voltage only, 4=total voltage and current
AP_Float volt_div_ratio;
AP_Float curr_amp_per_volt;
AP_Float input_voltage;
AP_Int16 pack_capacity; // Battery pack capacity less reserve
AP_Int8 inverted_flight_ch; // 0=disabled, 1-8 is channel for inverted flight trigger
AP_Int8 sonar_enabled;
AP_Int8 airspeed_enabled;
AP_Int8 flap_1_percent;
AP_Int8 flap_1_speed;
AP_Int8 flap_2_percent;
AP_Int8 flap_2_speed;
// RC channels
RC_Channel channel_roll;
RC_Channel channel_pitch;
RC_Channel channel_throttle;
RC_Channel channel_rudder;
RC_Channel_aux rc_5;
RC_Channel_aux rc_6;
RC_Channel_aux rc_7;
RC_Channel_aux rc_8;
// PID controllers
//
PID pidNavRoll;
PID pidServoRoll;
PID pidServoPitch;
PID pidNavPitchAirspeed;
PID pidServoRudder;
PID pidTeThrottle;
PID pidNavPitchAltitude;
uint8_t junk;
// Note: keep initializers here in the same order as they are declared above.
Parameters() :
// variable default key name
//-------------------------------------------------------------------------------------------------------
format_version (k_format_version, k_param_format_version, PSTR("SYSID_SW_MREV")),
software_type (k_software_type, k_param_software_type, PSTR("SYSID_SW_TYPE")),
sysid_this_mav (MAV_SYSTEM_ID, k_param_sysid_this_mav, PSTR("SYSID_THISMAV")),
sysid_my_gcs (255, k_param_sysid_my_gcs, PSTR("SYSID_MYGCS")),
serial3_baud (SERIAL3_BAUD/1000, k_param_serial3_baud, PSTR("SERIAL3_BAUD")),
kff_pitch_compensation (PITCH_COMP, k_param_kff_pitch_compensation, PSTR("KFF_PTCHCOMP")),
kff_rudder_mix (RUDDER_MIX, k_param_kff_rudder_mix, PSTR("KFF_RDDRMIX")),
kff_pitch_to_throttle (P_TO_T, k_param_kff_pitch_to_throttle, PSTR("KFF_PTCH2THR")),
kff_throttle_to_pitch (T_TO_P, k_param_kff_throttle_to_pitch, PSTR("KFF_THR2PTCH")),
crosstrack_gain (XTRACK_GAIN_SCALED, k_param_crosstrack_gain, PSTR("XTRK_GAIN_SC")),
crosstrack_entry_angle (XTRACK_ENTRY_ANGLE_CENTIDEGREE,k_param_crosstrack_entry_angle, PSTR("XTRK_ANGLE_CD")),
altitude_mix (ALTITUDE_MIX, k_param_altitude_mix, PSTR("ALT_MIX")),
airspeed_ratio (AIRSPEED_RATIO, k_param_airspeed_ratio, PSTR("ARSPD_RATIO")),
airspeed_offset (0, k_param_airspeed_offset, PSTR("ARSPD_OFFSET")),
/* XXX waypoint_mode missing here */
command_total (0, k_param_command_total, PSTR("CMD_TOTAL")),
geofence: main geo-fence code this implements the primary logic of geo-fencing
2011-12-15 03:09:29 -04:00
command_index (0, k_param_command_index, PSTR("CMD_INDEX")),
waypoint_radius (WP_RADIUS_DEFAULT, k_param_waypoint_radius, PSTR("WP_RADIUS")),
loiter_radius (LOITER_RADIUS_DEFAULT, k_param_loiter_radius, PSTR("WP_LOITER_RAD")),
#if GEOFENCE_ENABLED == ENABLED
geofence: added geo-fencing control parameters
2011-12-15 03:08:58 -04:00
fence_action (0, k_param_fence_action, PSTR("FENCE_ACTION")),
fence_total (0, k_param_fence_total, PSTR("FENCE_TOTAL")),
fence_channel (0, k_param_fence_channel, PSTR("FENCE_CHANNEL")),
fence_minalt (0, k_param_fence_minalt, PSTR("FENCE_MINALT")),
fence_maxalt (0, k_param_fence_maxalt, PSTR("FENCE_MAXALT")),
geofence: main geo-fence code this implements the primary logic of geo-fencing
2011-12-15 03:09:29 -04:00
#endif
flybywire_airspeed_min (AIRSPEED_FBW_MIN, k_param_flybywire_airspeed_min, PSTR("ARSPD_FBW_MIN")),
flybywire_airspeed_max (AIRSPEED_FBW_MAX, k_param_flybywire_airspeed_max, PSTR("ARSPD_FBW_MAX")),
Small issue with newline formatting
2011-12-26 19:48:26 -04:00
throttle_min (THROTTLE_MIN, k_param_throttle_min, PSTR("THR_MIN")),
throttle_max (THROTTLE_MAX, k_param_throttle_max, PSTR("THR_MAX")),
throttle_slewrate (THROTTLE_SLEW_LIMIT, k_param_throttle_slewrate, PSTR("THR_SLEWRATE")),
throttle_fs_enabled (THROTTLE_FAILSAFE, k_param_throttle_fs_enabled, PSTR("THR_FAILSAFE")),
throttle_fs_value (THROTTLE_FS_VALUE, k_param_throttle_fs_value, PSTR("THR_FS_VALUE")),
throttle_cruise (THROTTLE_CRUISE, k_param_throttle_cruise, PSTR("TRIM_THROTTLE")),
short_fs_action (SHORT_FAILSAFE_ACTION, k_param_short_fs_action, PSTR("FS_SHORT_ACTN")),
long_fs_action (LONG_FAILSAFE_ACTION, k_param_long_fs_action, PSTR("FS_LONG_ACTN")),
gcs_heartbeat_fs_enabled(GCS_HEARTBEAT_FAILSAFE, k_param_gcs_heartbeat_fs_enabled, PSTR("FS_GCS_ENABL")),
flight_mode_channel (FLIGHT_MODE_CHANNEL, k_param_flight_mode_channel, PSTR("FLTMODE_CH")),
flight_mode1 (FLIGHT_MODE_1, k_param_flight_mode1, PSTR("FLTMODE1")),
flight_mode2 (FLIGHT_MODE_2, k_param_flight_mode2, PSTR("FLTMODE2")),
flight_mode3 (FLIGHT_MODE_3, k_param_flight_mode3, PSTR("FLTMODE3")),
flight_mode4 (FLIGHT_MODE_4, k_param_flight_mode4, PSTR("FLTMODE4")),
flight_mode5 (FLIGHT_MODE_5, k_param_flight_mode5, PSTR("FLTMODE5")),
flight_mode6 (FLIGHT_MODE_6, k_param_flight_mode6, PSTR("FLTMODE6")),
roll_limit (HEAD_MAX_CENTIDEGREE, k_param_roll_limit, PSTR("LIM_ROLL_CD")),
pitch_limit_max (PITCH_MAX_CENTIDEGREE, k_param_pitch_limit_max, PSTR("LIM_PITCH_MAX")),
pitch_limit_min (PITCH_MIN_CENTIDEGREE, k_param_pitch_limit_min, PSTR("LIM_PITCH_MIN")),
auto_trim (AUTO_TRIM, k_param_auto_trim, PSTR("TRIM_AUTO")),
switch_enable (REVERSE_SWITCH, k_param_switch_enable, PSTR("SWITCH_ENABLE")),
mix_mode (ELEVON_MIXING, k_param_mix_mode, PSTR("ELEVON_MIXING")),
reverse_elevons (ELEVON_REVERSE, k_param_reverse_elevons, PSTR("ELEVON_REVERSE")),
reverse_ch1_elevon (ELEVON_CH1_REVERSE, k_param_reverse_ch1_elevon, PSTR("ELEVON_CH1_REV")),
reverse_ch2_elevon (ELEVON_CH2_REVERSE, k_param_reverse_ch2_elevon, PSTR("ELEVON_CH2_REV")),
num_resets (0, k_param_num_resets, PSTR("SYS_NUM_RESETS")),
log_bitmask (DEFAULT_LOG_BITMASK, k_param_log_bitmask, PSTR("LOG_BITMASK")),
log_last_filenumber (0, k_param_log_last_filenumber, PSTR("LOG_LASTFILE")),
reset_switch_chan (0, k_param_reset_switch_chan, PSTR("RST_SWITCH_CH")),
airspeed_cruise (AIRSPEED_CRUISE_CM, k_param_airspeed_cruise, PSTR("TRIM_ARSPD_CM")),
min_gndspeed (MIN_GNDSPEED_CM, k_param_min_gndspeed, PSTR("MIN_GNDSPD_CM")),
pitch_trim (0, k_param_pitch_trim, PSTR("TRIM_PITCH_CD")),
RTL_altitude (ALT_HOLD_HOME_CM, k_param_RTL_altitude, PSTR("ALT_HOLD_RTL")),
FBWB_min_altitude (ALT_HOLD_FBW_CM, k_param_FBWB_min_altitude, PSTR("ALT_HOLD_FBWCM")),
ground_temperature (0, k_param_ground_temperature, PSTR("GND_TEMP")),
ground_pressure (0, k_param_ground_pressure, PSTR("GND_ABS_PRESS")),
compass_enabled (MAGNETOMETER, k_param_compass_enabled, PSTR("MAG_ENABLE")),
flap_1_percent (FLAP_1_PERCENT, k_param_flap_1_percent, PSTR("FLAP_1_PERCNT")),
flap_1_speed (FLAP_1_SPEED, k_param_flap_1_speed, PSTR("FLAP_1_SPEED")),
flap_2_percent (FLAP_2_PERCENT, k_param_flap_2_percent, PSTR("FLAP_2_PERCNT")),
flap_2_speed (FLAP_2_SPEED, k_param_flap_2_speed, PSTR("FLAP_2_SPEED")),
battery_monitoring (DISABLED, k_param_battery_monitoring, PSTR("BATT_MONITOR")),
volt_div_ratio (VOLT_DIV_RATIO, k_param_volt_div_ratio, PSTR("VOLT_DIVIDER")),
curr_amp_per_volt (CURR_AMP_PER_VOLT, k_param_curr_amp_per_volt, PSTR("AMP_PER_VOLT")),
input_voltage (INPUT_VOLTAGE, k_param_input_voltage, PSTR("INPUT_VOLTS")),
pack_capacity (HIGH_DISCHARGE, k_param_pack_capacity, PSTR("BATT_CAPACITY")),
inverted_flight_ch (0, k_param_inverted_flight_ch, PSTR("INVERTEDFLT_CH")),
sonar_enabled (SONAR_ENABLED, k_param_sonar_enabled, PSTR("SONAR_ENABLE")),
airspeed_enabled (AIRSPEED_SENSOR, k_param_airspeed_enabled, PSTR("ARSPD_ENABLE")),
// Note - total parameter name length must be less than 14 characters for MAVLink compatibility!
// RC channel group key name
//----------------------------------------------------------------------
channel_roll (k_param_channel_roll, PSTR("RC1_")),
channel_pitch (k_param_channel_pitch, PSTR("RC2_")),
channel_throttle (k_param_channel_throttle, PSTR("RC3_")),
channel_rudder (k_param_channel_yaw, PSTR("RC4_")),
rc_5 (k_param_rc_5, PSTR("RC5_")),
rc_6 (k_param_rc_6, PSTR("RC6_")),
rc_7 (k_param_rc_7, PSTR("RC7_")),
rc_8 (k_param_rc_8, PSTR("RC8_")),
// PID controller group key name initial P initial I initial D initial imax
//---------------------------------------------------------------------------------------------------------------------------------------
pidNavRoll (k_param_heading_to_roll_PID, PSTR("HDNG2RLL_"), NAV_ROLL_P, NAV_ROLL_I, NAV_ROLL_D, NAV_ROLL_INT_MAX_CENTIDEGREE),
pidServoRoll (k_param_roll_to_servo_PID, PSTR("RLL2SRV_"), SERVO_ROLL_P, SERVO_ROLL_I, SERVO_ROLL_D, SERVO_ROLL_INT_MAX_CENTIDEGREE),
pidServoPitch (k_param_pitch_to_servo_PID, PSTR("PTCH2SRV_"), SERVO_PITCH_P, SERVO_PITCH_I, SERVO_PITCH_D, SERVO_PITCH_INT_MAX_CENTIDEGREE),
pidNavPitchAirspeed (k_param_airspeed_to_pitch_PID, PSTR("ARSP2PTCH_"), NAV_PITCH_ASP_P, NAV_PITCH_ASP_I, NAV_PITCH_ASP_D, NAV_PITCH_ASP_INT_MAX_CMSEC),
pidServoRudder (k_param_yaw_to_servo_PID, PSTR("YW2SRV_"), SERVO_YAW_P, SERVO_YAW_I, SERVO_YAW_D, SERVO_YAW_INT_MAX),
pidTeThrottle (k_param_energy_to_throttle_PID, PSTR("ENRGY2THR_"), THROTTLE_TE_P, THROTTLE_TE_I, THROTTLE_TE_D, THROTTLE_TE_INT_MAX),
pidNavPitchAltitude (k_param_altitude_to_pitch_PID, PSTR("ALT2PTCH_"), NAV_PITCH_ALT_P, NAV_PITCH_ALT_I, NAV_PITCH_ALT_D, NAV_PITCH_ALT_INT_MAX_CM),
junk(0) // XXX just so that we can add things without worrying about the trailing comma
{
}
};
#endif // PARAMETERS_H