ardupilot/libraries/AP_NavEKF3/AP_NavEKF3_AirDataFusion.cpp

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

748 lines
47 KiB
C++
Raw Normal View History

AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
#include <AP_HAL/AP_HAL.h>
#include "AP_NavEKF3.h"
#include "AP_NavEKF3_core.h"
#include <AP_DAL/AP_DAL.h>
AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
/********************************************************
* RESET FUNCTIONS *
********************************************************/
/********************************************************
* FUSE MEASURED_DATA *
********************************************************/
/*
* Fuse true airspeed measurements using explicit algebraic equations generated with Matlab symbolic toolbox.
* The script file used to generate these and other equations in this filter can be found here:
* https://github.com/PX4/ecl/blob/master/matlab/scripts/Inertial%20Nav%20EKF/GenerateNavFilterEquations.m
AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
*/
void NavEKF3_core::FuseAirspeed()
{
// declarations
2021-05-04 08:12:23 -03:00
ftype SH_TAS[3];
ftype SK_TAS[2];
AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
Vector24 H_TAS = {};
// copy required states to local variable names
const ftype vn = stateStruct.velocity.x;
const ftype ve = stateStruct.velocity.y;
const ftype vd = stateStruct.velocity.z;
const ftype vwn = stateStruct.wind_vel.x;
const ftype vwe = stateStruct.wind_vel.y;
AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
// calculate the predicted airspeed
const ftype VtasPred = norm((ve - vwe) , (vn - vwn) , vd);
AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
// perform fusion of True Airspeed measurement
if (VtasPred > 1.0f)
{
// calculate observation innovation and variance
innovVtas = VtasPred - tasDataDelayed.tas;
AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
// calculate observation jacobians
SH_TAS[0] = 1.0f/VtasPred;
SH_TAS[1] = (SH_TAS[0]*(2.0f*ve - 2.0f*vwe))*0.5f;
SH_TAS[2] = (SH_TAS[0]*(2.0f*vn - 2.0f*vwn))*0.5f;
H_TAS[4] = SH_TAS[2];
H_TAS[5] = SH_TAS[1];
H_TAS[6] = vd*SH_TAS[0];
H_TAS[22] = -SH_TAS[2];
H_TAS[23] = -SH_TAS[1];
// calculate Kalman gains
ftype temp = (tasDataDelayed.tasVariance + SH_TAS[2]*(P[4][4]*SH_TAS[2] + P[5][4]*SH_TAS[1] - P[22][4]*SH_TAS[2] - P[23][4]*SH_TAS[1] + P[6][4]*vd*SH_TAS[0]) + SH_TAS[1]*(P[4][5]*SH_TAS[2] + P[5][5]*SH_TAS[1] - P[22][5]*SH_TAS[2] - P[23][5]*SH_TAS[1] + P[6][5]*vd*SH_TAS[0]) - SH_TAS[2]*(P[4][22]*SH_TAS[2] + P[5][22]*SH_TAS[1] - P[22][22]*SH_TAS[2] - P[23][22]*SH_TAS[1] + P[6][22]*vd*SH_TAS[0]) - SH_TAS[1]*(P[4][23]*SH_TAS[2] + P[5][23]*SH_TAS[1] - P[22][23]*SH_TAS[2] - P[23][23]*SH_TAS[1] + P[6][23]*vd*SH_TAS[0]) + vd*SH_TAS[0]*(P[4][6]*SH_TAS[2] + P[5][6]*SH_TAS[1] - P[22][6]*SH_TAS[2] - P[23][6]*SH_TAS[1] + P[6][6]*vd*SH_TAS[0]));
if (temp >= tasDataDelayed.tasVariance) {
AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
SK_TAS[0] = 1.0f / temp;
faultStatus.bad_airspeed = false;
} else {
// the calculation is badly conditioned, so we cannot perform fusion on this step
// we reset the covariance matrix and try again next measurement
CovarianceInit();
faultStatus.bad_airspeed = true;
return;
}
SK_TAS[1] = SH_TAS[1];
if (tasDataDelayed.allowFusion && !airDataFusionWindOnly) {
Kfusion[0] = SK_TAS[0]*(P[0][4]*SH_TAS[2] - P[0][22]*SH_TAS[2] + P[0][5]*SK_TAS[1] - P[0][23]*SK_TAS[1] + P[0][6]*vd*SH_TAS[0]);
Kfusion[1] = SK_TAS[0]*(P[1][4]*SH_TAS[2] - P[1][22]*SH_TAS[2] + P[1][5]*SK_TAS[1] - P[1][23]*SK_TAS[1] + P[1][6]*vd*SH_TAS[0]);
Kfusion[2] = SK_TAS[0]*(P[2][4]*SH_TAS[2] - P[2][22]*SH_TAS[2] + P[2][5]*SK_TAS[1] - P[2][23]*SK_TAS[1] + P[2][6]*vd*SH_TAS[0]);
Kfusion[3] = SK_TAS[0]*(P[3][4]*SH_TAS[2] - P[3][22]*SH_TAS[2] + P[3][5]*SK_TAS[1] - P[3][23]*SK_TAS[1] + P[3][6]*vd*SH_TAS[0]);
Kfusion[4] = SK_TAS[0]*(P[4][4]*SH_TAS[2] - P[4][22]*SH_TAS[2] + P[4][5]*SK_TAS[1] - P[4][23]*SK_TAS[1] + P[4][6]*vd*SH_TAS[0]);
Kfusion[5] = SK_TAS[0]*(P[5][4]*SH_TAS[2] - P[5][22]*SH_TAS[2] + P[5][5]*SK_TAS[1] - P[5][23]*SK_TAS[1] + P[5][6]*vd*SH_TAS[0]);
Kfusion[6] = SK_TAS[0]*(P[6][4]*SH_TAS[2] - P[6][22]*SH_TAS[2] + P[6][5]*SK_TAS[1] - P[6][23]*SK_TAS[1] + P[6][6]*vd*SH_TAS[0]);
Kfusion[7] = SK_TAS[0]*(P[7][4]*SH_TAS[2] - P[7][22]*SH_TAS[2] + P[7][5]*SK_TAS[1] - P[7][23]*SK_TAS[1] + P[7][6]*vd*SH_TAS[0]);
Kfusion[8] = SK_TAS[0]*(P[8][4]*SH_TAS[2] - P[8][22]*SH_TAS[2] + P[8][5]*SK_TAS[1] - P[8][23]*SK_TAS[1] + P[8][6]*vd*SH_TAS[0]);
Kfusion[9] = SK_TAS[0]*(P[9][4]*SH_TAS[2] - P[9][22]*SH_TAS[2] + P[9][5]*SK_TAS[1] - P[9][23]*SK_TAS[1] + P[9][6]*vd*SH_TAS[0]);
} else {
2021-05-04 08:12:23 -03:00
// zero indexes 0 to 9
zero_range(&Kfusion[0], 0, 9);
}
if (tasDataDelayed.allowFusion && !inhibitDelAngBiasStates && !airDataFusionWindOnly) {
Kfusion[10] = SK_TAS[0]*(P[10][4]*SH_TAS[2] - P[10][22]*SH_TAS[2] + P[10][5]*SK_TAS[1] - P[10][23]*SK_TAS[1] + P[10][6]*vd*SH_TAS[0]);
Kfusion[11] = SK_TAS[0]*(P[11][4]*SH_TAS[2] - P[11][22]*SH_TAS[2] + P[11][5]*SK_TAS[1] - P[11][23]*SK_TAS[1] + P[11][6]*vd*SH_TAS[0]);
Kfusion[12] = SK_TAS[0]*(P[12][4]*SH_TAS[2] - P[12][22]*SH_TAS[2] + P[12][5]*SK_TAS[1] - P[12][23]*SK_TAS[1] + P[12][6]*vd*SH_TAS[0]);
} else {
2021-05-04 08:12:23 -03:00
// zero indexes 10 to 12
zero_range(&Kfusion[0], 10, 12);
}
if (tasDataDelayed.allowFusion && !inhibitDelVelBiasStates && !airDataFusionWindOnly) {
for (uint8_t index = 0; index < 3; index++) {
const uint8_t stateIndex = index + 13;
if (!dvelBiasAxisInhibit[index]) {
Kfusion[stateIndex] = SK_TAS[0]*(P[stateIndex][4]*SH_TAS[2] - P[stateIndex][22]*SH_TAS[2] + P[stateIndex][5]*SK_TAS[1] - P[stateIndex][23]*SK_TAS[1] + P[stateIndex][6]*vd*SH_TAS[0]);
} else {
Kfusion[stateIndex] = 0.0f;
}
}
} else {
2021-05-04 08:12:23 -03:00
// zero indexes 13 to 15
zero_range(&Kfusion[0], 13, 15);
}
AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
// zero Kalman gains to inhibit magnetic field state estimation
if (tasDataDelayed.allowFusion && !inhibitMagStates && !airDataFusionWindOnly) {
AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
Kfusion[16] = SK_TAS[0]*(P[16][4]*SH_TAS[2] - P[16][22]*SH_TAS[2] + P[16][5]*SK_TAS[1] - P[16][23]*SK_TAS[1] + P[16][6]*vd*SH_TAS[0]);
Kfusion[17] = SK_TAS[0]*(P[17][4]*SH_TAS[2] - P[17][22]*SH_TAS[2] + P[17][5]*SK_TAS[1] - P[17][23]*SK_TAS[1] + P[17][6]*vd*SH_TAS[0]);
Kfusion[18] = SK_TAS[0]*(P[18][4]*SH_TAS[2] - P[18][22]*SH_TAS[2] + P[18][5]*SK_TAS[1] - P[18][23]*SK_TAS[1] + P[18][6]*vd*SH_TAS[0]);
Kfusion[19] = SK_TAS[0]*(P[19][4]*SH_TAS[2] - P[19][22]*SH_TAS[2] + P[19][5]*SK_TAS[1] - P[19][23]*SK_TAS[1] + P[19][6]*vd*SH_TAS[0]);
Kfusion[20] = SK_TAS[0]*(P[20][4]*SH_TAS[2] - P[20][22]*SH_TAS[2] + P[20][5]*SK_TAS[1] - P[20][23]*SK_TAS[1] + P[20][6]*vd*SH_TAS[0]);
Kfusion[21] = SK_TAS[0]*(P[21][4]*SH_TAS[2] - P[21][22]*SH_TAS[2] + P[21][5]*SK_TAS[1] - P[21][23]*SK_TAS[1] + P[21][6]*vd*SH_TAS[0]);
} else {
2021-05-04 08:12:23 -03:00
// zero indexes 16 to 21
zero_range(&Kfusion[0], 16, 21);
}
if (tasDataDelayed.allowFusion && !inhibitWindStates && !treatWindStatesAsTruth) {
Kfusion[22] = SK_TAS[0]*(P[22][4]*SH_TAS[2] - P[22][22]*SH_TAS[2] + P[22][5]*SK_TAS[1] - P[22][23]*SK_TAS[1] + P[22][6]*vd*SH_TAS[0]);
Kfusion[23] = SK_TAS[0]*(P[23][4]*SH_TAS[2] - P[23][22]*SH_TAS[2] + P[23][5]*SK_TAS[1] - P[23][23]*SK_TAS[1] + P[23][6]*vd*SH_TAS[0]);
} else {
2021-05-04 08:12:23 -03:00
// zero indexes 22 to 23 = 2
zero_range(&Kfusion[0], 22, 23);
AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
}
// calculate measurement innovation variance
varInnovVtas = 1.0f/SK_TAS[0];
// calculate the innovation consistency test ratio
2021-05-04 08:12:23 -03:00
tasTestRatio = sq(innovVtas) / (sq(MAX(0.01f * (ftype)frontend->_tasInnovGate, 1.0f)) * varInnovVtas);
AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
// fail if the ratio is > 1, but don't fail if bad IMU data
const bool isConsistent = (tasTestRatio < 1.0f) || badIMUdata;
AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
tasTimeout = (imuSampleTime_ms - lastTasPassTime_ms) > frontend->tasRetryTime_ms;
if (!isConsistent) {
lastTasFailTime_ms = imuSampleTime_ms;
} else {
lastTasFailTime_ms = 0;
}
AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
// test the ratio before fusing data, forcing fusion if airspeed and position are timed out as we have no choice but to try and use airspeed to constrain error growth
if (tasDataDelayed.allowFusion && (isConsistent || (tasTimeout && posTimeout))) {
AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
// restart the counter
lastTasPassTime_ms = imuSampleTime_ms;
// correct the state vector
for (uint8_t j= 0; j<=stateIndexLim; j++) {
statesArray[j] = statesArray[j] - Kfusion[j] * innovVtas;
}
stateStruct.quat.normalize();
// correct the covariance P = (I - K*H)*P
// take advantage of the empty columns in KH to reduce the
// number of operations
for (unsigned i = 0; i<=stateIndexLim; i++) {
for (unsigned j = 0; j<=3; j++) {
KH[i][j] = 0.0f;
}
for (unsigned j = 4; j<=6; j++) {
KH[i][j] = Kfusion[i] * H_TAS[j];
}
for (unsigned j = 7; j<=21; j++) {
KH[i][j] = 0.0f;
}
for (unsigned j = 22; j<=23; j++) {
KH[i][j] = Kfusion[i] * H_TAS[j];
}
}
for (unsigned j = 0; j<=stateIndexLim; j++) {
for (unsigned i = 0; i<=stateIndexLim; i++) {
ftype res = 0;
res += KH[i][4] * P[4][j];
res += KH[i][5] * P[5][j];
res += KH[i][6] * P[6][j];
res += KH[i][22] * P[22][j];
res += KH[i][23] * P[23][j];
KHP[i][j] = res;
}
}
for (unsigned i = 0; i<=stateIndexLim; i++) {
for (unsigned j = 0; j<=stateIndexLim; j++) {
P[i][j] = P[i][j] - KHP[i][j];
}
}
}
// force the covariance matrix to be symmetrical and limit the variances to prevent ill-conditioning.
ForceSymmetry();
ConstrainVariances();
AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
}
}
// select fusion of true airspeed measurements
void NavEKF3_core::SelectTasFusion()
{
// Check if the magnetometer has been fused on that time step and the filter is running at faster than 200 Hz
// If so, don't fuse measurements on this time step to reduce frame over-runs
// Only allow one time slip to prevent high rate magnetometer data locking out fusion of other measurements
if (magFusePerformed && dtIMUavg < 0.005f && !airSpdFusionDelayed) {
airSpdFusionDelayed = true;
return;
} else {
airSpdFusionDelayed = false;
}
// get true airspeed measurement
readAirSpdData();
// if the filter is initialised, wind states are not inhibited and we have data to fuse, then perform TAS fusion
AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
if (tasDataToFuse && statesInitialised && !inhibitWindStates) {
FuseAirspeed();
tasDataToFuse = false;
AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
prevTasStep_ms = imuSampleTime_ms;
}
}
// select fusion of synthetic sideslip measurements or body frame drag
AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
// synthetic sidelip fusion only works for fixed wing aircraft and relies on the average sideslip being close to zero
// body frame drag only works for bluff body multi rotor vehices with thrust forces aligned with the Z axis
// it requires a stable wind for best results and should not be used for aerobatic flight
void NavEKF3_core::SelectBetaDragFusion()
AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
{
// Check if the magnetometer has been fused on that time step and the filter is running at faster than 200 Hz
// If so, don't fuse measurements on this time step to reduce frame over-runs
// Only allow one time slip to prevent high rate magnetometer data preventing fusion of other measurements
if (magFusePerformed && dtIMUavg < 0.005f && !sideSlipFusionDelayed) {
sideSlipFusionDelayed = true;
return;
} else {
sideSlipFusionDelayed = false;
}
// set true when the fusion time interval has triggered
bool f_timeTrigger = ((imuSampleTime_ms - prevBetaDragStep_ms) >= frontend->betaAvg_ms);
// use of air data to constrain drift is necessary if we have limited sensor data or are doing inertial dead reckoning
bool is_dead_reckoning = ((imuSampleTime_ms - lastGpsPosPassTime_ms) > frontend->deadReckonDeclare_ms) &&
((imuSampleTime_ms - lastVelPassTime_ms) > frontend->deadReckonDeclare_ms);
const bool noYawSensor = !use_compass() && !using_noncompass_for_yaw();
const bool f_required = (noYawSensor && (frontend->_betaMask & (1<<1))) || is_dead_reckoning;
AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
// set true when sideslip fusion is feasible (requires zero sideslip assumption to be valid and use of wind states)
const bool f_beta_feasible = (assume_zero_sideslip() && !inhibitWindStates);
AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
// use synthetic sideslip fusion if feasible, required and enough time has lapsed since the last fusion
if (f_beta_feasible && f_timeTrigger) {
// unless air data is required to constrain drift, it is only used to update wind state estimates
if (f_required || (frontend->_betaMask & (1<<0))) {
// we are required to correct all states
airDataFusionWindOnly = false;
} else {
2022-04-25 05:22:07 -03:00
// we are required to correct only wind states
airDataFusionWindOnly = true;
}
AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
FuseSideslip();
prevBetaDragStep_ms = imuSampleTime_ms;
}
2021-01-19 00:36:39 -04:00
#if EK3_FEATURE_DRAG_FUSION
// fusion of XY body frame aero specific forces is done at a slower rate and only if alternative methods of wind estimation are not available
if (!inhibitWindStates && storedDrag.recall(dragSampleDelayed,imuDataDelayed.time_ms)) {
FuseDragForces();
AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
}
dragTimeout = (imuSampleTime_ms - lastDragPassTime_ms) > frontend->dragFailTimeLimit_ms;
2021-01-19 00:36:39 -04:00
#endif
AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
}
/*
* Fuse sythetic sideslip measurement of zero using explicit algebraic equations generated with Matlab symbolic toolbox.
* The script file used to generate these and other equations in this filter can be found here:
* https://github.com/PX4/ecl/blob/master/matlab/scripts/Inertial%20Nav%20EKF/GenerateNavFilterEquations.m
AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
*/
void NavEKF3_core::FuseSideslip()
{
// declarations
2021-05-04 08:12:23 -03:00
const ftype R_BETA = 0.03f; // assume a sideslip angle RMS of ~10 deg
AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
Vector13 SH_BETA;
Vector8 SK_BETA;
2021-05-04 08:12:23 -03:00
Vector3F vel_rel_wind;
AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
Vector24 H_BETA;
// copy required states to local variable names
const ftype q0 = stateStruct.quat[0];
const ftype q1 = stateStruct.quat[1];
const ftype q2 = stateStruct.quat[2];
const ftype q3 = stateStruct.quat[3];
const ftype vn = stateStruct.velocity.x;
const ftype ve = stateStruct.velocity.y;
const ftype vd = stateStruct.velocity.z;
const ftype vwn = stateStruct.wind_vel.x;
const ftype vwe = stateStruct.wind_vel.y;
AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
// calculate predicted wind relative velocity in NED
vel_rel_wind.x = vn - vwn;
vel_rel_wind.y = ve - vwe;
vel_rel_wind.z = vd;
// rotate into body axes
vel_rel_wind = prevTnb * vel_rel_wind;
// perform fusion of assumed sideslip = 0
if (vel_rel_wind.x > 5.0f)
{
// Calculate observation jacobians
SH_BETA[0] = (vn - vwn)*(sq(q0) + sq(q1) - sq(q2) - sq(q3)) - vd*(2*q0*q2 - 2*q1*q3) + (ve - vwe)*(2*q0*q3 + 2*q1*q2);
2021-05-04 08:12:23 -03:00
if (fabsF(SH_BETA[0]) <= 1e-9f) {
AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
faultStatus.bad_sideslip = true;
return;
} else {
faultStatus.bad_sideslip = false;
}
SH_BETA[1] = (ve - vwe)*(sq(q0) - sq(q1) + sq(q2) - sq(q3)) + vd*(2*q0*q1 + 2*q2*q3) - (vn - vwn)*(2*q0*q3 - 2*q1*q2);
SH_BETA[2] = vn - vwn;
SH_BETA[3] = ve - vwe;
SH_BETA[4] = 1/sq(SH_BETA[0]);
SH_BETA[5] = 1/SH_BETA[0];
SH_BETA[6] = SH_BETA[5]*(sq(q0) - sq(q1) + sq(q2) - sq(q3));
SH_BETA[7] = sq(q0) + sq(q1) - sq(q2) - sq(q3);
SH_BETA[8] = 2*q0*SH_BETA[3] - 2*q3*SH_BETA[2] + 2*q1*vd;
SH_BETA[9] = 2*q0*SH_BETA[2] + 2*q3*SH_BETA[3] - 2*q2*vd;
SH_BETA[10] = 2*q2*SH_BETA[2] - 2*q1*SH_BETA[3] + 2*q0*vd;
SH_BETA[11] = 2*q1*SH_BETA[2] + 2*q2*SH_BETA[3] + 2*q3*vd;
SH_BETA[12] = 2*q0*q3;
H_BETA[0] = SH_BETA[5]*SH_BETA[8] - SH_BETA[1]*SH_BETA[4]*SH_BETA[9];
H_BETA[1] = SH_BETA[5]*SH_BETA[10] - SH_BETA[1]*SH_BETA[4]*SH_BETA[11];
H_BETA[2] = SH_BETA[5]*SH_BETA[11] + SH_BETA[1]*SH_BETA[4]*SH_BETA[10];
H_BETA[3] = - SH_BETA[5]*SH_BETA[9] - SH_BETA[1]*SH_BETA[4]*SH_BETA[8];
H_BETA[4] = - SH_BETA[5]*(SH_BETA[12] - 2*q1*q2) - SH_BETA[1]*SH_BETA[4]*SH_BETA[7];
H_BETA[5] = SH_BETA[6] - SH_BETA[1]*SH_BETA[4]*(SH_BETA[12] + 2*q1*q2);
H_BETA[6] = SH_BETA[5]*(2*q0*q1 + 2*q2*q3) + SH_BETA[1]*SH_BETA[4]*(2*q0*q2 - 2*q1*q3);
for (uint8_t i=7; i<=21; i++) {
H_BETA[i] = 0.0f;
}
H_BETA[22] = SH_BETA[5]*(SH_BETA[12] - 2*q1*q2) + SH_BETA[1]*SH_BETA[4]*SH_BETA[7];
H_BETA[23] = SH_BETA[1]*SH_BETA[4]*(SH_BETA[12] + 2*q1*q2) - SH_BETA[6];
// Calculate Kalman gains
2021-05-04 08:12:23 -03:00
ftype temp = (R_BETA - (SH_BETA[5]*(SH_BETA[12] - 2*q1*q2) + SH_BETA[1]*SH_BETA[4]*SH_BETA[7])*(P[22][4]*(SH_BETA[5]*(SH_BETA[12] - 2*q1*q2) + SH_BETA[1]*SH_BETA[4]*SH_BETA[7]) - P[4][4]*(SH_BETA[5]*(SH_BETA[12] - 2*q1*q2) + SH_BETA[1]*SH_BETA[4]*SH_BETA[7]) + P[5][4]*(SH_BETA[6] - SH_BETA[1]*SH_BETA[4]*(SH_BETA[12] + 2*q1*q2)) - P[23][4]*(SH_BETA[6] - SH_BETA[1]*SH_BETA[4]*(SH_BETA[12] + 2*q1*q2)) + P[0][4]*(SH_BETA[5]*SH_BETA[8] - SH_BETA[1]*SH_BETA[4]*SH_BETA[9]) + P[1][4]*(SH_BETA[5]*SH_BETA[10] - SH_BETA[1]*SH_BETA[4]*SH_BETA[11]) + P[2][4]*(SH_BETA[5]*SH_BETA[11] + SH_BETA[1]*SH_BETA[4]*SH_BETA[10]) - P[3][4]*(SH_BETA[5]*SH_BETA[9] + SH_BETA[1]*SH_BETA[4]*SH_BETA[8]) + P[6][4]*(SH_BETA[5]*(2*q0*q1 + 2*q2*q3) + SH_BETA[1]*SH_BETA[4]*(2*q0*q2 - 2*q1*q3))) + (SH_BETA[5]*(SH_BETA[12] - 2*q1*q2) + SH_BETA[1]*SH_BETA[4]*SH_BETA[7])*(P[22][22]*(SH_BETA[5]*(SH_BETA[12] - 2*q1*q2) + SH_BETA[1]*SH_BETA[4]*SH_BETA[7]) - P[4][22]*(SH_BETA[5]*(SH_BETA[12] - 2*q1*q2) + SH_BETA[1]*SH_BETA[4]*SH_BETA[7]) + P[5][22]*(SH_BETA[6] - SH_BETA[1]*SH_BETA[4]*(SH_BETA[12] + 2*q1*q2)) - P[23][22]*(SH_BETA[6] - SH_BETA[1]*SH_BETA[4]*(SH_BETA[12] + 2*q1*q2)) + P[0][22]*(SH_BETA[5]*SH_BETA[8] - SH_BETA[1]*SH_BETA[4]*SH_BETA[9]) + P[1][22]*(SH_BETA[5]*SH_BETA[10] - SH_BETA[1]*SH_BETA[4]*SH_BETA[11]) + P[2][22]*(SH_BETA[5]*SH_BETA[11] + SH_BETA[1]*SH_BETA[4]*SH_BETA[10]) - P[3][22]*(SH_BETA[5]*SH_BETA[9] + SH_BETA[1]*SH_BETA[4]*SH_BETA[8]) + P[6][22]*(SH_BETA[5]*(2*q0*q1 + 2*q2*q3) + SH_BETA[1]*SH_BETA[4]*(2*q0*q2 - 2*q1*q3))) + (SH_BETA[6] - SH_BETA[1]*SH_BETA[4]*(SH_BETA[12] + 2*q1*q2))*(P[22][5]*(SH_BETA[5]*(SH_BETA[12] - 2*q1*q2) + SH_BETA[1]*SH_BETA[4]*SH_BETA[7]) - P[4][5]*(SH_BETA[5]*(SH_BETA[12] - 2*q1*q2) + SH_BETA[1]*SH_BETA[4]*SH_BETA[7]) + P[5][5]*(SH_BETA[6] - SH_BETA[1]*SH_BETA[4]*(SH_BETA[12] + 2*q1*q2)) - P[23][5]*(SH_BETA[6] - SH_BETA[1]*SH_BETA[4]*(SH_BETA[12] + 2*q1*q2)) + P[0][5]*(SH_BETA[5]*SH_BETA[8] - SH_BETA[1]*SH_BETA[4]*SH_BETA[9]) + P[1][5]*(SH_BETA[5]*SH_BETA[10] - SH_BETA[1]*SH_BETA[4]*SH_BETA[11]) + P[2][5]*(SH_BETA[5]*SH_BETA[11] + SH_BETA[1]*SH_BETA[4]*SH_BETA[10]) - P[3][5]*(SH_BETA[5]*SH_BETA[9] + SH_BETA[1]*SH_BETA[4]*SH_BETA[8]) + P[6][5]*(SH_BETA[5]*(2*q0*q1 + 2*q2*q3) + SH_BETA[1]*SH_BETA[4]*(2*q0*q2 - 2*q1*q3))) - (SH_BETA[6] - SH_BETA[1]*SH_BETA[4]*(SH_BETA[12] + 2*q1*q2))*(P[22][23]*(SH_BETA[5]*(SH_BETA[12] - 2*q1*q2) + SH_BETA[1]*SH_BETA[4]*SH_BETA[7]) - P[4][23]*(SH_BETA[5]*(SH_BETA[12] - 2*q1*q2) + SH_BETA[1]*SH_BETA[4]*SH_BETA[7]) + P[5][23]*(SH_BETA[6] - SH_BETA[1]*SH_BETA[4]*(SH_BETA[12] + 2*q1*q2)) - P[23][23]*(SH_BETA[6] - SH_BETA[1]*SH_BETA[4]*(SH_BETA[12] + 2*q1*q2)) + P[0][23]*(SH_BETA[5]*SH_BETA[8] - SH_BETA[1]*SH_BETA[4]*SH_BETA[9]) + P[1][23]*(SH_BETA[5]*SH_BETA[10] - SH_BETA[1]*SH_BETA[4]*SH_BETA[11]) + P[2][23]*(SH_BETA[5]*SH_BETA[11] + SH_BETA[1]*SH_BETA[4]*SH_BETA[10]) - P[3][23]*(SH_BETA[5]*SH_BETA[9] + SH_BETA[1]*SH_BETA[4]*SH_BETA[8]) + P[6][23]*(SH_BETA[5]*(2*q0*q1 + 2*q2*q3) + SH_BETA[1]*SH_BETA[4]*(2*q0*q2 - 2*q1*q3))) + (SH_BETA[5]*SH_BETA[8] - SH_BETA[1]*SH_BETA[4]*SH_BETA[9])*(P[22][0]*(SH_BETA[5]*(SH_BETA[12] - 2*q1*q2) + SH_BETA[1]*SH_BETA[4]*SH_BETA[7]) - P[4][0]*(SH_BETA[5]*(SH_BETA[12] - 2*q1*q2) + SH_BETA[1]*SH_BETA[4]*SH_BETA[7]) + P[5][0]*(SH_BETA[6] - SH_BETA[1]*SH_BETA[4]*(SH_BETA[12] + 2*q1*q2)) - P[23][0]*(SH_BETA[6] - SH_BETA[1]*SH_BETA[4]*(SH_BETA[12] + 2*q1*q2)) + P[0][0]*(SH_BETA[5]*SH_BETA[8] - SH_BETA[1]*SH_BETA[4]*SH_BETA[9]) + P[1][0]*(SH_BETA[5]*SH_BETA[10] - SH_BETA[1]*SH_BETA[4]*SH_BETA[11]) + P[2][0]*(SH_BETA[5]*SH_BETA[11] + SH_BETA[1]*SH_BETA[4]*SH_BETA[10]) - P[3][0]*(SH_BETA[5]*SH_BETA[9] + SH_BETA[1]*SH_BETA[4]*SH_BETA[8]) + P[6][0]*(SH_BETA[5]*(2*q0*q1 + 2*q2*q3) + SH_BETA[1]*SH_BETA[4]*(2*q0*q2 - 2*q1*q3))) + (SH_BETA[5]*SH_BETA[10] - SH_BETA[1]*SH_BETA[4]*SH_BETA[11])*(P[22][1]*(SH_BETA[5]*(SH_BETA[12] - 2*q1*q2) + SH_BETA[1]*SH_BETA[4]*SH_BETA[7]) - P[4][1]*(SH_BETA[5]*(SH_BETA[12] - 2*q1*q2) + SH_BETA[1]*SH_BETA[4]*SH_BETA[7]) + P[5][1]*(SH_BETA[6] - SH_BETA[1]*SH_BETA[4]*(SH_BETA[12] + 2*q1*q2)) - P[23][1]*(SH_BETA[6] - SH_BETA[1]*SH_B
AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
if (temp >= R_BETA) {
SK_BETA[0] = 1.0f / temp;
faultStatus.bad_sideslip = false;
} else {
// the calculation is badly conditioned, so we cannot perform fusion on this step
// we reset the covariance matrix and try again next measurement
CovarianceInit();
faultStatus.bad_sideslip = true;
return;
}
SK_BETA[1] = SH_BETA[5]*(SH_BETA[12] - 2*q1*q2) + SH_BETA[1]*SH_BETA[4]*SH_BETA[7];
SK_BETA[2] = SH_BETA[6] - SH_BETA[1]*SH_BETA[4]*(SH_BETA[12] + 2*q1*q2);
SK_BETA[3] = SH_BETA[5]*(2*q0*q1 + 2*q2*q3) + SH_BETA[1]*SH_BETA[4]*(2*q0*q2 - 2*q1*q3);
SK_BETA[4] = SH_BETA[5]*SH_BETA[10] - SH_BETA[1]*SH_BETA[4]*SH_BETA[11];
SK_BETA[5] = SH_BETA[5]*SH_BETA[8] - SH_BETA[1]*SH_BETA[4]*SH_BETA[9];
SK_BETA[6] = SH_BETA[5]*SH_BETA[11] + SH_BETA[1]*SH_BETA[4]*SH_BETA[10];
SK_BETA[7] = SH_BETA[5]*SH_BETA[9] + SH_BETA[1]*SH_BETA[4]*SH_BETA[8];
if (!airDataFusionWindOnly) {
Kfusion[0] = SK_BETA[0]*(P[0][0]*SK_BETA[5] + P[0][1]*SK_BETA[4] - P[0][4]*SK_BETA[1] + P[0][5]*SK_BETA[2] + P[0][2]*SK_BETA[6] + P[0][6]*SK_BETA[3] - P[0][3]*SK_BETA[7] + P[0][22]*SK_BETA[1] - P[0][23]*SK_BETA[2]);
Kfusion[1] = SK_BETA[0]*(P[1][0]*SK_BETA[5] + P[1][1]*SK_BETA[4] - P[1][4]*SK_BETA[1] + P[1][5]*SK_BETA[2] + P[1][2]*SK_BETA[6] + P[1][6]*SK_BETA[3] - P[1][3]*SK_BETA[7] + P[1][22]*SK_BETA[1] - P[1][23]*SK_BETA[2]);
Kfusion[2] = SK_BETA[0]*(P[2][0]*SK_BETA[5] + P[2][1]*SK_BETA[4] - P[2][4]*SK_BETA[1] + P[2][5]*SK_BETA[2] + P[2][2]*SK_BETA[6] + P[2][6]*SK_BETA[3] - P[2][3]*SK_BETA[7] + P[2][22]*SK_BETA[1] - P[2][23]*SK_BETA[2]);
Kfusion[3] = SK_BETA[0]*(P[3][0]*SK_BETA[5] + P[3][1]*SK_BETA[4] - P[3][4]*SK_BETA[1] + P[3][5]*SK_BETA[2] + P[3][2]*SK_BETA[6] + P[3][6]*SK_BETA[3] - P[3][3]*SK_BETA[7] + P[3][22]*SK_BETA[1] - P[3][23]*SK_BETA[2]);
Kfusion[4] = SK_BETA[0]*(P[4][0]*SK_BETA[5] + P[4][1]*SK_BETA[4] - P[4][4]*SK_BETA[1] + P[4][5]*SK_BETA[2] + P[4][2]*SK_BETA[6] + P[4][6]*SK_BETA[3] - P[4][3]*SK_BETA[7] + P[4][22]*SK_BETA[1] - P[4][23]*SK_BETA[2]);
Kfusion[5] = SK_BETA[0]*(P[5][0]*SK_BETA[5] + P[5][1]*SK_BETA[4] - P[5][4]*SK_BETA[1] + P[5][5]*SK_BETA[2] + P[5][2]*SK_BETA[6] + P[5][6]*SK_BETA[3] - P[5][3]*SK_BETA[7] + P[5][22]*SK_BETA[1] - P[5][23]*SK_BETA[2]);
Kfusion[6] = SK_BETA[0]*(P[6][0]*SK_BETA[5] + P[6][1]*SK_BETA[4] - P[6][4]*SK_BETA[1] + P[6][5]*SK_BETA[2] + P[6][2]*SK_BETA[6] + P[6][6]*SK_BETA[3] - P[6][3]*SK_BETA[7] + P[6][22]*SK_BETA[1] - P[6][23]*SK_BETA[2]);
Kfusion[7] = SK_BETA[0]*(P[7][0]*SK_BETA[5] + P[7][1]*SK_BETA[4] - P[7][4]*SK_BETA[1] + P[7][5]*SK_BETA[2] + P[7][2]*SK_BETA[6] + P[7][6]*SK_BETA[3] - P[7][3]*SK_BETA[7] + P[7][22]*SK_BETA[1] - P[7][23]*SK_BETA[2]);
Kfusion[8] = SK_BETA[0]*(P[8][0]*SK_BETA[5] + P[8][1]*SK_BETA[4] - P[8][4]*SK_BETA[1] + P[8][5]*SK_BETA[2] + P[8][2]*SK_BETA[6] + P[8][6]*SK_BETA[3] - P[8][3]*SK_BETA[7] + P[8][22]*SK_BETA[1] - P[8][23]*SK_BETA[2]);
Kfusion[9] = SK_BETA[0]*(P[9][0]*SK_BETA[5] + P[9][1]*SK_BETA[4] - P[9][4]*SK_BETA[1] + P[9][5]*SK_BETA[2] + P[9][2]*SK_BETA[6] + P[9][6]*SK_BETA[3] - P[9][3]*SK_BETA[7] + P[9][22]*SK_BETA[1] - P[9][23]*SK_BETA[2]);
} else {
2021-05-04 08:12:23 -03:00
// zero indexes 0 to 9
zero_range(&Kfusion[0], 0, 9);
}
if (!inhibitDelAngBiasStates && !airDataFusionWindOnly) {
Kfusion[10] = SK_BETA[0]*(P[10][0]*SK_BETA[5] + P[10][1]*SK_BETA[4] - P[10][4]*SK_BETA[1] + P[10][5]*SK_BETA[2] + P[10][2]*SK_BETA[6] + P[10][6]*SK_BETA[3] - P[10][3]*SK_BETA[7] + P[10][22]*SK_BETA[1] - P[10][23]*SK_BETA[2]);
Kfusion[11] = SK_BETA[0]*(P[11][0]*SK_BETA[5] + P[11][1]*SK_BETA[4] - P[11][4]*SK_BETA[1] + P[11][5]*SK_BETA[2] + P[11][2]*SK_BETA[6] + P[11][6]*SK_BETA[3] - P[11][3]*SK_BETA[7] + P[11][22]*SK_BETA[1] - P[11][23]*SK_BETA[2]);
Kfusion[12] = SK_BETA[0]*(P[12][0]*SK_BETA[5] + P[12][1]*SK_BETA[4] - P[12][4]*SK_BETA[1] + P[12][5]*SK_BETA[2] + P[12][2]*SK_BETA[6] + P[12][6]*SK_BETA[3] - P[12][3]*SK_BETA[7] + P[12][22]*SK_BETA[1] - P[12][23]*SK_BETA[2]);
} else {
2021-05-04 08:12:23 -03:00
// zero indexes 10 to 12 = 3
zero_range(&Kfusion[0], 10, 12);
}
if (!inhibitDelVelBiasStates && !airDataFusionWindOnly) {
for (uint8_t index = 0; index < 3; index++) {
const uint8_t stateIndex = index + 13;
if (!dvelBiasAxisInhibit[index]) {
Kfusion[stateIndex] = SK_BETA[0]*(P[stateIndex][0]*SK_BETA[5] + P[stateIndex][1]*SK_BETA[4] - P[stateIndex][4]*SK_BETA[1] + P[stateIndex][5]*SK_BETA[2] + P[stateIndex][2]*SK_BETA[6] + P[stateIndex][6]*SK_BETA[3] - P[stateIndex][3]*SK_BETA[7] + P[stateIndex][22]*SK_BETA[1] - P[stateIndex][23]*SK_BETA[2]);
} else {
Kfusion[stateIndex] = 0.0f;
}
}
} else {
2021-05-04 08:12:23 -03:00
// zero indexes 13 to 15
zero_range(&Kfusion[0], 13, 15);
}
AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
// zero Kalman gains to inhibit magnetic field state estimation
if (!inhibitMagStates && !airDataFusionWindOnly) {
AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
Kfusion[16] = SK_BETA[0]*(P[16][0]*SK_BETA[5] + P[16][1]*SK_BETA[4] - P[16][4]*SK_BETA[1] + P[16][5]*SK_BETA[2] + P[16][2]*SK_BETA[6] + P[16][6]*SK_BETA[3] - P[16][3]*SK_BETA[7] + P[16][22]*SK_BETA[1] - P[16][23]*SK_BETA[2]);
Kfusion[17] = SK_BETA[0]*(P[17][0]*SK_BETA[5] + P[17][1]*SK_BETA[4] - P[17][4]*SK_BETA[1] + P[17][5]*SK_BETA[2] + P[17][2]*SK_BETA[6] + P[17][6]*SK_BETA[3] - P[17][3]*SK_BETA[7] + P[17][22]*SK_BETA[1] - P[17][23]*SK_BETA[2]);
Kfusion[18] = SK_BETA[0]*(P[18][0]*SK_BETA[5] + P[18][1]*SK_BETA[4] - P[18][4]*SK_BETA[1] + P[18][5]*SK_BETA[2] + P[18][2]*SK_BETA[6] + P[18][6]*SK_BETA[3] - P[18][3]*SK_BETA[7] + P[18][22]*SK_BETA[1] - P[18][23]*SK_BETA[2]);
Kfusion[19] = SK_BETA[0]*(P[19][0]*SK_BETA[5] + P[19][1]*SK_BETA[4] - P[19][4]*SK_BETA[1] + P[19][5]*SK_BETA[2] + P[19][2]*SK_BETA[6] + P[19][6]*SK_BETA[3] - P[19][3]*SK_BETA[7] + P[19][22]*SK_BETA[1] - P[19][23]*SK_BETA[2]);
Kfusion[20] = SK_BETA[0]*(P[20][0]*SK_BETA[5] + P[20][1]*SK_BETA[4] - P[20][4]*SK_BETA[1] + P[20][5]*SK_BETA[2] + P[20][2]*SK_BETA[6] + P[20][6]*SK_BETA[3] - P[20][3]*SK_BETA[7] + P[20][22]*SK_BETA[1] - P[20][23]*SK_BETA[2]);
Kfusion[21] = SK_BETA[0]*(P[21][0]*SK_BETA[5] + P[21][1]*SK_BETA[4] - P[21][4]*SK_BETA[1] + P[21][5]*SK_BETA[2] + P[21][2]*SK_BETA[6] + P[21][6]*SK_BETA[3] - P[21][3]*SK_BETA[7] + P[21][22]*SK_BETA[1] - P[21][23]*SK_BETA[2]);
} else {
2021-05-04 08:12:23 -03:00
// zero indexes 16 to 21
zero_range(&Kfusion[0], 16, 21);
}
if (!inhibitWindStates && !treatWindStatesAsTruth) {
Kfusion[22] = SK_BETA[0]*(P[22][0]*SK_BETA[5] + P[22][1]*SK_BETA[4] - P[22][4]*SK_BETA[1] + P[22][5]*SK_BETA[2] + P[22][2]*SK_BETA[6] + P[22][6]*SK_BETA[3] - P[22][3]*SK_BETA[7] + P[22][22]*SK_BETA[1] - P[22][23]*SK_BETA[2]);
Kfusion[23] = SK_BETA[0]*(P[23][0]*SK_BETA[5] + P[23][1]*SK_BETA[4] - P[23][4]*SK_BETA[1] + P[23][5]*SK_BETA[2] + P[23][2]*SK_BETA[6] + P[23][6]*SK_BETA[3] - P[23][3]*SK_BETA[7] + P[23][22]*SK_BETA[1] - P[23][23]*SK_BETA[2]);
} else {
2021-05-04 08:12:23 -03:00
// zero indexes 22 to 23
zero_range(&Kfusion[0], 22, 23);
AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
}
// calculate predicted sideslip angle and innovation using small angle approximation
innovBeta = constrain_ftype(vel_rel_wind.y / vel_rel_wind.x, -0.5f, 0.5f);
AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
// correct the state vector
for (uint8_t j= 0; j<=stateIndexLim; j++) {
statesArray[j] = statesArray[j] - Kfusion[j] * innovBeta;
}
stateStruct.quat.normalize();
// correct the covariance P = (I - K*H)*P
// take advantage of the empty columns in KH to reduce the
// number of operations
for (unsigned i = 0; i<=stateIndexLim; i++) {
for (unsigned j = 0; j<=6; j++) {
KH[i][j] = Kfusion[i] * H_BETA[j];
}
for (unsigned j = 7; j<=21; j++) {
KH[i][j] = 0.0f;
}
for (unsigned j = 22; j<=23; j++) {
KH[i][j] = Kfusion[i] * H_BETA[j];
}
}
for (unsigned j = 0; j<=stateIndexLim; j++) {
for (unsigned i = 0; i<=stateIndexLim; i++) {
ftype res = 0;
res += KH[i][0] * P[0][j];
res += KH[i][1] * P[1][j];
res += KH[i][2] * P[2][j];
res += KH[i][3] * P[3][j];
res += KH[i][4] * P[4][j];
res += KH[i][5] * P[5][j];
res += KH[i][6] * P[6][j];
res += KH[i][22] * P[22][j];
res += KH[i][23] * P[23][j];
KHP[i][j] = res;
}
}
for (unsigned i = 0; i<=stateIndexLim; i++) {
for (unsigned j = 0; j<=stateIndexLim; j++) {
P[i][j] = P[i][j] - KHP[i][j];
}
}
}
2019-02-22 19:35:24 -04:00
// force the covariance matrix to be symmetrical and limit the variances to prevent ill-conditioning.
AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
ForceSymmetry();
ConstrainVariances();
}
2021-01-19 00:36:39 -04:00
#if EK3_FEATURE_DRAG_FUSION
/*
* Fuse X and Y body axis specific forces using explicit algebraic equations generated with SymPy.
* See derivation/generate_2.py for derivation
* Output for change reference: derivation/generated/acc_bf_generated.cpp
*/
void NavEKF3_core::FuseDragForces()
{
// drag model parameters
2021-05-04 08:12:23 -03:00
const ftype bcoef_x = frontend->_ballisticCoef_x;
const ftype bcoef_y = frontend->_ballisticCoef_y;
const ftype mcoef = frontend->_momentumDragCoef.get();
const bool using_bcoef_x = bcoef_x > 1.0f;
const bool using_bcoef_y = bcoef_y > 1.0f;
const bool using_mcoef = mcoef > 0.001f;
2021-05-04 08:12:23 -03:00
ZERO_FARRAY(Kfusion);
Vector24 Hfusion; // Observation Jacobians
2021-05-04 08:12:23 -03:00
const ftype R_ACC = sq(fmaxF(frontend->_dragObsNoise, 0.5f));
const ftype density_ratio = sqrtF(dal.get_EAS2TAS());
const ftype rho = fmaxF(1.225f * density_ratio, 0.1f); // air density
// get latest estimated orientation
2021-05-04 08:12:23 -03:00
const ftype &q0 = stateStruct.quat[0];
const ftype &q1 = stateStruct.quat[1];
const ftype &q2 = stateStruct.quat[2];
const ftype &q3 = stateStruct.quat[3];
// get latest velocity in earth frame
2021-05-04 08:12:23 -03:00
const ftype &vn = stateStruct.velocity.x;
const ftype &ve = stateStruct.velocity.y;
const ftype &vd = stateStruct.velocity.z;
// get latest wind velocity in earth frame
2021-05-04 08:12:23 -03:00
const ftype &vwn = stateStruct.wind_vel.x;
const ftype &vwe = stateStruct.wind_vel.y;
// predicted specific forces
// calculate relative wind velocity in earth frame and rotate into body frame
2021-05-04 08:12:23 -03:00
const Vector3F rel_wind_earth(vn - vwn, ve - vwe, vd);
const Vector3F rel_wind_body = prevTnb * rel_wind_earth;
// perform sequential fusion of XY specific forces
for (uint8_t axis_index = 0; axis_index < 2; axis_index++) {
// correct accel data for bias
2021-05-04 08:12:23 -03:00
const ftype mea_acc = dragSampleDelayed.accelXY[axis_index] - stateStruct.accel_bias[axis_index] / dtEkfAvg;
2022-04-25 05:22:07 -03:00
// Acceleration in m/s/s predicted using vehicle and wind velocity estimates
// Initialised to measured value and updated later using available drag model
2021-05-04 08:12:23 -03:00
ftype predAccel = mea_acc;
// predicted sign of drag force
2021-05-04 08:12:23 -03:00
const ftype dragForceSign = is_positive(rel_wind_body[axis_index]) ? -1.0f : 1.0f;
if (axis_index == 0) {
// drag can be modelled as an arbitrary combination of bluff body drag that proportional to
// speed squared, and rotor momentum drag that is proportional to speed.
ftype Kaccx; // Derivative of specific force wrt airspeed
if (using_mcoef && using_bcoef_x) {
// mixed bluff body and propeller momentum drag
2021-05-04 08:12:23 -03:00
const ftype airSpd = (bcoef_x / rho) * (- mcoef + sqrtF(sq(mcoef) + 2.0f * (rho / bcoef_x) * fabsF(mea_acc)));
Kaccx = fmaxF(1e-1f, (rho / bcoef_x) * airSpd + mcoef * density_ratio);
predAccel = (0.5f / bcoef_x) * rho * sq(rel_wind_body[0]) * dragForceSign - rel_wind_body[0] * mcoef * density_ratio;
} else if (using_mcoef) {
// propeller momentum drag only
Kaccx = fmaxF(1e-1f, mcoef * density_ratio);
predAccel = - rel_wind_body[0] * mcoef * density_ratio;
} else if (using_bcoef_x) {
// bluff body drag only
2021-05-04 08:12:23 -03:00
const ftype airSpd = sqrtF((2.0f * bcoef_x * fabsF(mea_acc)) / rho);
Kaccx = fmaxF(1e-1f, (rho / bcoef_x) * airSpd);
predAccel = (0.5f / bcoef_x) * rho * sq(rel_wind_body[0]) * dragForceSign;
2020-11-22 04:29:31 -04:00
} else {
// skip this axis
continue;
}
// intermediate variables
2021-05-04 08:12:23 -03:00
const ftype HK0 = vn - vwn;
const ftype HK1 = ve - vwe;
const ftype HK2 = HK0*q0 + HK1*q3 - q2*vd;
const ftype HK3 = 2*Kaccx;
2021-05-04 08:12:23 -03:00
const ftype HK4 = HK0*q1 + HK1*q2 + q3*vd;
const ftype HK5 = HK0*q2 - HK1*q1 + q0*vd;
const ftype HK6 = -HK0*q3 + HK1*q0 + q1*vd;
const ftype HK7 = sq(q0) + sq(q1) - sq(q2) - sq(q3);
const ftype HK8 = HK7*Kaccx;
2021-05-04 08:12:23 -03:00
const ftype HK9 = q0*q3 + q1*q2;
const ftype HK10 = HK3*HK9;
const ftype HK11 = q0*q2 - q1*q3;
const ftype HK12 = 2*HK9;
const ftype HK13 = 2*HK11;
const ftype HK14 = 2*HK4;
const ftype HK15 = 2*HK2;
const ftype HK16 = 2*HK5;
const ftype HK17 = 2*HK6;
const ftype HK18 = -HK12*P[0][23] + HK12*P[0][5] - HK13*P[0][6] + HK14*P[0][1] + HK15*P[0][0] - HK16*P[0][2] + HK17*P[0][3] - HK7*P[0][22] + HK7*P[0][4];
const ftype HK19 = HK12*P[5][23];
const ftype HK20 = -HK12*P[23][23] - HK13*P[6][23] + HK14*P[1][23] + HK15*P[0][23] - HK16*P[2][23] + HK17*P[3][23] + HK19 - HK7*P[22][23] + HK7*P[4][23];
const ftype HK21 = sq(Kaccx);
2021-05-04 08:12:23 -03:00
const ftype HK22 = HK12*HK21;
const ftype HK23 = HK12*P[5][5] - HK13*P[5][6] + HK14*P[1][5] + HK15*P[0][5] - HK16*P[2][5] + HK17*P[3][5] - HK19 + HK7*P[4][5] - HK7*P[5][22];
const ftype HK24 = HK12*P[5][6] - HK12*P[6][23] - HK13*P[6][6] + HK14*P[1][6] + HK15*P[0][6] - HK16*P[2][6] + HK17*P[3][6] + HK7*P[4][6] - HK7*P[6][22];
const ftype HK25 = HK7*P[4][22];
const ftype HK26 = -HK12*P[4][23] + HK12*P[4][5] - HK13*P[4][6] + HK14*P[1][4] + HK15*P[0][4] - HK16*P[2][4] + HK17*P[3][4] - HK25 + HK7*P[4][4];
const ftype HK27 = HK21*HK7;
const ftype HK28 = -HK12*P[22][23] + HK12*P[5][22] - HK13*P[6][22] + HK14*P[1][22] + HK15*P[0][22] - HK16*P[2][22] + HK17*P[3][22] + HK25 - HK7*P[22][22];
const ftype HK29 = -HK12*P[1][23] + HK12*P[1][5] - HK13*P[1][6] + HK14*P[1][1] + HK15*P[0][1] - HK16*P[1][2] + HK17*P[1][3] - HK7*P[1][22] + HK7*P[1][4];
const ftype HK30 = -HK12*P[2][23] + HK12*P[2][5] - HK13*P[2][6] + HK14*P[1][2] + HK15*P[0][2] - HK16*P[2][2] + HK17*P[2][3] - HK7*P[2][22] + HK7*P[2][4];
const ftype HK31 = -HK12*P[3][23] + HK12*P[3][5] - HK13*P[3][6] + HK14*P[1][3] + HK15*P[0][3] - HK16*P[2][3] + HK17*P[3][3] - HK7*P[3][22] + HK7*P[3][4];
// const ftype HK32 = Kaccx/(-HK13*HK21*HK24 + HK14*HK21*HK29 + HK15*HK18*HK21 - HK16*HK21*HK30 + HK17*HK21*HK31 - HK20*HK22 + HK22*HK23 + HK26*HK27 - HK27*HK28 + R_ACC);
// calculate innovation variance and exit if badly conditioned
innovDragVar.x = (-HK13*HK21*HK24 + HK14*HK21*HK29 + HK15*HK18*HK21 - HK16*HK21*HK30 + HK17*HK21*HK31 - HK20*HK22 + HK22*HK23 + HK26*HK27 - HK27*HK28 + R_ACC);
if (innovDragVar.x < R_ACC) {
return;
}
const ftype HK32 = Kaccx / innovDragVar.x;
// Observation Jacobians
Hfusion[0] = -HK2*HK3;
Hfusion[1] = -HK3*HK4;
Hfusion[2] = HK3*HK5;
Hfusion[3] = -HK3*HK6;
Hfusion[4] = -HK8;
Hfusion[5] = -HK10;
Hfusion[6] = HK11*HK3;
Hfusion[22] = HK8;
Hfusion[23] = HK10;
// Kalman gains
// Don't allow modification of any states other than wind velocity - we only need a wind estimate.
// See derivation/generated/acc_bf_generated.cpp for un-implemented Kalman gain equations.
Kfusion[22] = -HK28*HK32;
Kfusion[23] = -HK20*HK32;
} else if (axis_index == 1) {
2022-04-25 05:22:07 -03:00
// drag can be modelled as an arbitrary combination of bluff body drag that proportional to
// speed squared, and rotor momentum drag that is proportional to speed.
ftype Kaccy; // Derivative of specific force wrt airspeed
if (using_mcoef && using_bcoef_y) {
// mixed bluff body and propeller momentum drag
2021-05-04 08:12:23 -03:00
const ftype airSpd = (bcoef_y / rho) * (- mcoef + sqrtF(sq(mcoef) + 2.0f * (rho / bcoef_y) * fabsF(mea_acc)));
Kaccy = fmaxF(1e-1f, (rho / bcoef_y) * airSpd + mcoef * density_ratio);
predAccel = (0.5f / bcoef_y) * rho * sq(rel_wind_body[1]) * dragForceSign - rel_wind_body[1] * mcoef * density_ratio;
} else if (using_mcoef) {
// propeller momentum drag only
Kaccy = fmaxF(1e-1f, mcoef * density_ratio);
predAccel = - rel_wind_body[1] * mcoef * density_ratio;
} else if (using_bcoef_y) {
// bluff body drag only
2021-05-04 08:12:23 -03:00
const ftype airSpd = sqrtF((2.0f * bcoef_y * fabsF(mea_acc)) / rho);
Kaccy = fmaxF(1e-1f, (rho / bcoef_y) * airSpd);
predAccel = (0.5f / bcoef_y) * rho * sq(rel_wind_body[1]) * dragForceSign;
2020-11-22 04:29:31 -04:00
} else {
// nothing more to do
return;
}
// intermediate variables
2021-05-04 08:12:23 -03:00
const ftype HK0 = ve - vwe;
const ftype HK1 = vn - vwn;
const ftype HK2 = HK0*q0 - HK1*q3 + q1*vd;
const ftype HK3 = 2*Kaccy;
2021-05-04 08:12:23 -03:00
const ftype HK4 = -HK0*q1 + HK1*q2 + q0*vd;
const ftype HK5 = HK0*q2 + HK1*q1 + q3*vd;
const ftype HK6 = HK0*q3 + HK1*q0 - q2*vd;
const ftype HK7 = q0*q3 - q1*q2;
const ftype HK8 = HK3*HK7;
const ftype HK9 = sq(q0) - sq(q1) + sq(q2) - sq(q3);
const ftype HK10 = HK9*Kaccy;
2021-05-04 08:12:23 -03:00
const ftype HK11 = q0*q1 + q2*q3;
const ftype HK12 = 2*HK11;
const ftype HK13 = 2*HK7;
const ftype HK14 = 2*HK5;
const ftype HK15 = 2*HK2;
const ftype HK16 = 2*HK4;
const ftype HK17 = 2*HK6;
const ftype HK18 = HK12*P[0][6] + HK13*P[0][22] - HK13*P[0][4] + HK14*P[0][2] + HK15*P[0][0] + HK16*P[0][1] - HK17*P[0][3] - HK9*P[0][23] + HK9*P[0][5];
const ftype HK19 = sq(Kaccy);
2021-05-04 08:12:23 -03:00
const ftype HK20 = HK12*P[6][6] - HK13*P[4][6] + HK13*P[6][22] + HK14*P[2][6] + HK15*P[0][6] + HK16*P[1][6] - HK17*P[3][6] + HK9*P[5][6] - HK9*P[6][23];
const ftype HK21 = HK13*P[4][22];
const ftype HK22 = HK12*P[6][22] + HK13*P[22][22] + HK14*P[2][22] + HK15*P[0][22] + HK16*P[1][22] - HK17*P[3][22] - HK21 - HK9*P[22][23] + HK9*P[5][22];
const ftype HK23 = HK13*HK19;
const ftype HK24 = HK12*P[4][6] - HK13*P[4][4] + HK14*P[2][4] + HK15*P[0][4] + HK16*P[1][4] - HK17*P[3][4] + HK21 - HK9*P[4][23] + HK9*P[4][5];
const ftype HK25 = HK9*P[5][23];
const ftype HK26 = HK12*P[5][6] - HK13*P[4][5] + HK13*P[5][22] + HK14*P[2][5] + HK15*P[0][5] + HK16*P[1][5] - HK17*P[3][5] - HK25 + HK9*P[5][5];
const ftype HK27 = HK19*HK9;
const ftype HK28 = HK12*P[6][23] + HK13*P[22][23] - HK13*P[4][23] + HK14*P[2][23] + HK15*P[0][23] + HK16*P[1][23] - HK17*P[3][23] + HK25 - HK9*P[23][23];
const ftype HK29 = HK12*P[2][6] + HK13*P[2][22] - HK13*P[2][4] + HK14*P[2][2] + HK15*P[0][2] + HK16*P[1][2] - HK17*P[2][3] - HK9*P[2][23] + HK9*P[2][5];
const ftype HK30 = HK12*P[1][6] + HK13*P[1][22] - HK13*P[1][4] + HK14*P[1][2] + HK15*P[0][1] + HK16*P[1][1] - HK17*P[1][3] - HK9*P[1][23] + HK9*P[1][5];
const ftype HK31 = HK12*P[3][6] + HK13*P[3][22] - HK13*P[3][4] + HK14*P[2][3] + HK15*P[0][3] + HK16*P[1][3] - HK17*P[3][3] - HK9*P[3][23] + HK9*P[3][5];
// const ftype HK32 = Kaccy/(HK12*HK19*HK20 + HK14*HK19*HK29 + HK15*HK18*HK19 + HK16*HK19*HK30 - HK17*HK19*HK31 + HK22*HK23 - HK23*HK24 + HK26*HK27 - HK27*HK28 + R_ACC);
innovDragVar.y = (HK12*HK19*HK20 + HK14*HK19*HK29 + HK15*HK18*HK19 + HK16*HK19*HK30 - HK17*HK19*HK31 + HK22*HK23 - HK23*HK24 + HK26*HK27 - HK27*HK28 + R_ACC);
if (innovDragVar.y < R_ACC) {
// calculation is badly conditioned
return;
}
const ftype HK32 = Kaccy / innovDragVar.y;
// Observation Jacobians
Hfusion[0] = -HK2*HK3;
Hfusion[1] = -HK3*HK4;
Hfusion[2] = -HK3*HK5;
Hfusion[3] = HK3*HK6;
Hfusion[4] = HK8;
Hfusion[5] = -HK10;
Hfusion[6] = -HK11*HK3;
Hfusion[22] = -HK8;
Hfusion[23] = HK10;
// Kalman gains
// Don't allow modification of any states other than wind velocity at this stage of development - we only need a wind estimate.
// See derivation/generated/acc_bf_generated.cpp for un-implemented Kalman gain equations.
Kfusion[22] = -HK22*HK32;
Kfusion[23] = -HK28*HK32;
}
innovDrag[axis_index] = predAccel - mea_acc;
dragTestRatio[axis_index] = sq(innovDrag[axis_index]) / (25.0f * innovDragVar[axis_index]);
// if the innovation consistency check fails then don't fuse the sample
if (dragTestRatio[axis_index] > 1.0f) {
return;
}
// correct the state vector
for (uint8_t j= 0; j<=stateIndexLim; j++) {
statesArray[j] = statesArray[j] - Kfusion[j] * innovDrag[axis_index];
}
stateStruct.quat.normalize();
// correct the covariance P = (I - K*H)*P
// take advantage of the empty columns in KH to reduce the
// number of operations
for (unsigned i = 0; i<=stateIndexLim; i++) {
for (unsigned j = 0; j<=6; j++) {
KH[i][j] = Kfusion[i] * Hfusion[j];
}
for (unsigned j = 7; j<=21; j++) {
KH[i][j] = 0.0f;
}
for (unsigned j = 22; j<=23; j++) {
KH[i][j] = Kfusion[i] * Hfusion[j];
}
}
for (unsigned j = 0; j<=stateIndexLim; j++) {
for (unsigned i = 0; i<=stateIndexLim; i++) {
ftype res = 0;
res += KH[i][0] * P[0][j];
res += KH[i][1] * P[1][j];
res += KH[i][2] * P[2][j];
res += KH[i][3] * P[3][j];
res += KH[i][4] * P[4][j];
res += KH[i][5] * P[5][j];
res += KH[i][6] * P[6][j];
res += KH[i][22] * P[22][j];
res += KH[i][23] * P[23][j];
KHP[i][j] = res;
}
}
for (unsigned i = 0; i<=stateIndexLim; i++) {
for (unsigned j = 0; j<=stateIndexLim; j++) {
P[i][j] = P[i][j] - KHP[i][j];
}
}
}
// record time of successful fusion
lastDragPassTime_ms = imuSampleTime_ms;
}
2021-01-19 00:36:39 -04:00
#endif // EK3_FEATURE_DRAG_FUSION
AP_NavEKF3: added EKF3 for EKF experimentation AP_NavEKF3: Implement same maths as PX4/ecl EKF Replace attitude vector states with quaternions Remove gyro scale factor states Add XY accel delta velocity bias estimation Initial tuning Add GPS body frame offset compensation AP_NavEKF3: Fix bugs and consolidate aiding switch logic Switching in and out of aiding modes was being performed in more than one place and was using two variables. The reversion out of GPS mode due to prolonged loss of GPS was not working. This consolidates the logic and ensures that PV_AidingMode is only changed by the setAidingMode function. AP_NavEKF3: prevent multiple fusion mode changes per filter update AP_NavEKF3: Update tuning defaults AP_NavEKF3: Fix bug causing switching in and out of aiding If the GPS receiver was disconnected and no data received, then then the gpsGoodToAlign check did not get a chance to run and becasue it was previously true the EKF would switch back into aiding. This prevents this by ensuring that gpsGoodToAlign defaults to false when the check is not being performed. An additional check has also been dded to ensure that there is GPS data to fuse before we declare ready to use GPS. AP_NavEKF3: Fix bug preventing planes recovering from bad magnetometers This bug created a race condition whereby if the EKF had to reset the yaw to the GPS ground course to recover from a bad magnetometer, the new heading could be over-written by the bad magnetic heading when the plane reached the height for the scheduled reset. AP_NavEKF3: Improve switch-over to backup magnetometer When switching over to a back up magnetometer, ensure that the earth field estimate are reset. Otherwise mag earth field estimates due to the previous failed mag could cause data from the new mag to be rejected. AP_NavEKF3: enable automatic use of range finder height AP_NavEKF3: Fix bug in handling of invalid range data AP_NavEKF3: Fix height drift on ground using range finder without GPSAP_NavEKF3: AP_NavEKF3: Handle yaw jumps due to core switches AP_NavEKF3: Enable simultaneous GPS and optical flow use AP_NavEKF3: fix console status reporting AP_NavEKF3: send messages to mavlink instead of console This allows the GCS to better handle the display of messages to the user. AP_NavEKF3: replace deprecated function call AP_NavEKF3: Compensate for sensor body frame offsets AP_NavEKF3: Fix bug in median filter code AP_NavEKF3: save some memory in the position offsets in EKF3 We don't need to copy that vector3f for every sample. A uint8_t does the job AP_NavEKF3: Add fusion of range beacon data AP_NavEKF3: Bring up to date with EKF2 AP_NavEKF3: Misc range beacon updates AP_NavEKF3: Add mising accessors AP_NavEKF3: remove duplicate include AP_NavEKF3: Prevent NaN's when accessing range beacon debug data AP_NavEKF3: Update range beacon naming AP_NavEKF3: updates AP_NavEKF3: miscellaneous changes AP_NavEKF3: misc updates AP_NavEKF3: misc range beacons updates AP_NavEKF3: add missing rover default param
2016-07-14 02:08:43 -03:00
/********************************************************
* MISC FUNCTIONS *
********************************************************/