ardupilot/libraries/AP_HAL_F4Light/Config.h

59 lines
1.5 KiB
C
Raw Normal View History

// no includes from here! only defines in one place
#pragma once
#define DEBUG_BUILD 1
#define USART_SAFE_INSERT // ignore received bytes if buffer overflows
#define USE_WFE
#define F4Light_RC_INPUT_MIN_CHANNELS 4
#define F4Light_RC_INPUT_NUM_CHANNELS 20
#define USE_MPU // guard page in process stack
//#define DEBUG_LOOP_TIME for AP_Scheduler
#ifdef DEBUG_BUILD
// profiling
//#define ISR_PERF - now all time-consuming calculations moved out from ISR to io_completion level
//#define SEM_PROF - now semaphores are part of scheduler
#define SHED_PROF
#define MTASK_PROF
//#define SHED_DEBUG
//#define SEM_DEBUG
//#define MPU_DEBUG
//#define I2C_DEBUG
//#define DEBUG_SPI
#endif
/*
interrupts priorities:
*/
#define PWM_INT_PRIORITY 0 // PWM input (10uS between interrupts)
#define SOFT_UART_INT_PRIORITY 1 // soft_uart
#define I2C_INT_PRIORITY 2 // i2c
#define TIMER_I2C_INT_PRIORITY 3 // timer_i2C (2uS between interrupts)
#define MICROS_INT_PRIORITY 4 // micros() Timer5
#define SYSTICK_INT_PRIORITY 5 // SysTick
#define UART_INT_PRIORITY 6 // uart
#define DMA_IOC_INT_PRIORITY 7 // dma IO complete
#define GPIO_INT_PRIORITY 8 // gpio pin
#define MPU_INT_PRIORITY 9 // MPU6000 DataReady
#define VSI_INT_PRIORITY 10 // OSD VSI
#define USB_INT_PRIORITY 11 // usb
#define IOC_INT_PRIORITY 12 // driver's io_completion
// 13
#define SVC_INT_PRIORITY 14 // scheduler - Timer7, tail timer, svc
#define PENDSV_INT_PRIORITY 15 // Pend_Sw
#define SPI_INT_PRIORITY I2C_INT_PRIORITY