ardupilot/libraries/AP_HAL_ChibiOS/hwdef/sparky2/hwdef.dat

76 lines
1.3 KiB
Plaintext
Raw Normal View History

# hw definition file for processing by chibios_pins.py
# for Sparky2 hardware
# MCU class and specific type
MCU STM32F4xx STM32F405xx
define CONFIG_HAL_BOARD_SUBTYPE HAL_BOARD_SUBTYPE_CHIBIOS_SPARKY2
# board ID for firmware load
APJ_BOARD_ID 11
# crystal frequency
OSCILLATOR_HZ 8000000
STM32_PLLM_VALUE 8
FLASH_SIZE_KB 1024
# board voltage
STM32_VDD 330U
# serial port for stdout via flexi-port (conn3)
STDOUT_SERIAL SD1
STDOUT_BAUDRATE 115200
# only one I2C bus
I2C_ORDER I2C1
# order of UARTs (and USB)
UART_ORDER OTG1 USART1
PA4 VDD_5V_SENS ADC1
# spi bus for IMU
PA5 SPI1_SCK SPI1
PA6 SPI1_MISO SPI1
PA7 SPI1_MOSI SPI1
PA9 USART1_TX USART1
PA10 USART1_RX USART1
# PA10 IO-debug-console
PA11 OTG_FS_DM OTG1
PA12 OTG_FS_DP OTG1
PA13 JTMS-SWDIO SWD
PA14 JTCK-SWCLK SWD
PB8 I2C1_SCL I2C1
PB9 I2C1_SDA I2C1
PC4 MPU_CS CS
PC6 TIM8_CH1 TIM8 PWM(1)
PC7 TIM8_CH2 TIM8 PWM(2)
PC8 TIM8_CH3 TIM8 PWM(3)
PC9 TIM8_CH4 TIM8 PWM(4)
define HAL_STORAGE_SIZE 16384
define STORAGE_FLASH_PAGE 1
FLASH_SIZE_KB 1024
# reserve 16k for bootloader and 32k for flash storage
FLASH_RESERVE_START_KB 48
define HAL_INS_DEFAULT HAL_INS_MPU60XX_SPI
define HAL_COMPASS_DEFAULT HAL_COMPASS_HMC5843
define HAL_COMPASS_HMC5843_I2C_BUS 1
define HAL_COMPASS_HMC5843_I2C_ADDR 0x1E
# SPI devices
SPIDEV mpu6000 SPI1 DEVID1 MPU_CS MODE3 1*MHZ 8*MHZ