ardupilot/libraries/AP_Torqeedo/AP_Torqeedo.cpp

/*
   This program is free software: you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation, either version 3 of the License, or
   (at your option) any later version.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

#include "AP_Torqeedo.h"

#if HAL_TORQEEDO_ENABLED

#include <AP_Common/AP_Common.h>
#include <AP_Math/AP_Math.h>
#include <SRV_Channel/SRV_Channel.h>

#define TORQEEDO_SERIAL_BAUD        19200   // communication is always at 19200
#define TORQEEDO_PACKET_HEADER      0xAC    // communication packet header
#define TORQEEDO_PACKET_FOOTER      0xAD    // communication packer footer

extern const AP_HAL::HAL& hal;

// parameters
const AP_Param::GroupInfo AP_Torqeedo::var_info[] = {

    // @Param: ENABLE
    // @DisplayName: Torqeedo enable
    // @Description: Torqeedo enable
    // @Values: 0:Disabled, 1:Enabled
    // @User: Standard
    // @RebootRequired: True
    AP_GROUPINFO_FLAGS("ENABLE", 1, AP_Torqeedo, _enable, 0, AP_PARAM_FLAG_ENABLE),

    // @Param: ONOFF_PIN
    // @DisplayName: Torqeedo ON/Off pin
    // @Description: Pin number connected to Torqeedo's on/off pin. -1 to disable turning motor on/off from autopilot
    // @Values: -1:Disabled,50:AUX1,51:AUX2,52:AUX3,53:AUX4,54:AUX5,55:AUX6
    // @User: Standard
    // @RebootRequired: True
    AP_GROUPINFO("ONOFF_PIN", 2, AP_Torqeedo, _pin_onoff, -1),

    // @Param: DE_PIN
    // @DisplayName: Torqeedo DE pin
    // @Description: Pin number connected to RS485 to Serial converter's DE pin. -1 to disable sending commands to motor
    // @Values: -1:Disabled,50:AUX1,51:AUX2,52:AUX3,53:AUX4,54:AUX5,55:AUX6
    // @User: Standard
    // @RebootRequired: True
    AP_GROUPINFO("DE_PIN", 3, AP_Torqeedo, _pin_de, -1),

    AP_GROUPEND
};

AP_Torqeedo::AP_Torqeedo()
{
    _singleton = this;
    AP_Param::setup_object_defaults(this, var_info);
}

// initialise driver
void AP_Torqeedo::init()
{
    // only init once
    if (_initialised) {
        return;
    }

    // create background thread to process serial input and output
    if (!hal.scheduler->thread_create(FUNCTOR_BIND_MEMBER(&AP_Torqeedo::thread_main, void), "torqeedo", 2048, AP_HAL::Scheduler::PRIORITY_RCOUT, 1)) {
        return;
    }
}

// initialise serial port and gpio pins (run from background thread)
bool AP_Torqeedo::init_internals()
{
    // find serial driver and initialise
    const AP_SerialManager &serial_manager = AP::serialmanager();
    _uart = serial_manager.find_serial(AP_SerialManager::SerialProtocol_Torqeedo, 0);
    if (_uart == nullptr) {
        return false;
    }
    _uart->begin(TORQEEDO_SERIAL_BAUD);
    _uart->set_flow_control(AP_HAL::UARTDriver::FLOW_CONTROL_DISABLE);
    _uart->set_unbuffered_writes(true);

    // initialise onoff pin and set for 0.5 sec to turn on motor
    if (_pin_onoff > -1) {
        hal.gpio->pinMode(_pin_onoff, HAL_GPIO_OUTPUT);
        hal.gpio->write(_pin_onoff, 1);

        // delay 0.5 sec and then unset pin
        hal.scheduler->delay(500);
        hal.gpio->write(_pin_onoff, 0);
    }

    // initialise RS485 DE pin (when high, allows send to motor)
    if (_pin_de > -1) {
        hal.gpio->pinMode(_pin_de, HAL_GPIO_OUTPUT);
        hal.gpio->write(_pin_de, 0);
    }

    return true;
}

// consume incoming messages from motor, reply with latest motor speed
// runs in background thread
void AP_Torqeedo::thread_main()
{
    // initialisation
    if (!init_internals()) {
        return;
    }
    _initialised = true;

    while (true) {
        // 1ms loop delay
        hal.scheduler->delay_microseconds(1000);

        // check if transmit pin should be unset
        check_for_send_end();

        // parse incoming characters
        uint32_t nbytes = MIN(_uart->available(), 1024U);
        bool motor_speed_request_received = false;
        while (nbytes-- > 0) {
            int16_t b = _uart->read();
            if (b >= 0 ) {
                if (parse_byte((uint8_t)b)) {
                    // request received to send updated motor speed
                    motor_speed_request_received = true;
                }
            }
        }

        // send motor speed
        if (motor_speed_request_received) {
            send_motor_speed_cmd();
        }
    }
}

// process a single byte received on serial port
// return true if a this driver should send a set-motor-speed message
bool AP_Torqeedo::parse_byte(uint8_t b)
{
    bool motor_speed_requested = false;

    switch (_parse_state) {
    case ParseState::WAITING_FOR_HEADER:
        if (b == TORQEEDO_PACKET_HEADER) {
            _parse_state = ParseState::WAITING_FOR_FOOTER;
        }
        _received_buff_len = 0;
        break;
    case ParseState::WAITING_FOR_FOOTER:
        if (b == TORQEEDO_PACKET_FOOTER) {
            _parse_state = ParseState::WAITING_FOR_HEADER;

            // check message length
            if (_received_buff_len == 0) {
                _parse_error_count++;
                break;
            }

            // check crc
            const uint8_t crc_expected = crc8_maxim(_received_buff, _received_buff_len-1);
            if (_received_buff[_received_buff_len-1] != crc_expected) {
                _parse_error_count++;
                break;
            }
            _parse_success_count++;

            // check message id
            MsgId msg_id = (MsgId)_received_buff[0];
            if (msg_id == MsgId::REQUEST_MOTOR_SPEED) {
                motor_speed_requested = true;
            }

        } else {
            // add to buffer
            _received_buff[_received_buff_len] = b;
            _received_buff_len++;
            if (_received_buff_len > TORQEEDO_MESSAGE_LEN_MAX) {
                // message too long
                _parse_state = ParseState::WAITING_FOR_HEADER;
                _parse_error_count++;
            }
        }
        break;
    }

    return motor_speed_requested;
}

// set DE Serial CTS pin to enable sending commands to motor
void AP_Torqeedo::send_start()
{
    // set gpio pin or serial port's CTS pin
    if (_pin_de > -1) {
        hal.gpio->write(_pin_de, 1);
    } else {
        _uart->set_CTS_pin(true);
    }
}

// check for timeout after sending and unset pin if required
void AP_Torqeedo::check_for_send_end()
{
    if (_send_delay_us == 0) {
        // not sending
        return;
    }

    if (AP_HAL::micros() - _last_send_motor_us < _send_delay_us) {
        // return if delay has not yet elapsed
        return;
    }
    _send_delay_us = 0;

    // unset gpio or serial port's CTS pin
    if (_pin_de > -1) {
        hal.gpio->write(_pin_de, 0);
    } else {
        _uart->set_CTS_pin(false);
    }
}

// calculate delay require to allow bytes to be sent
uint32_t AP_Torqeedo::calc_send_delay_us(uint8_t num_bytes)
{
    // baud rate of 19200 bits/sec
    // total number of bits = 10 x num_bytes
    // convert from seconds to micros by multiplying by 1,000,000
    // plus additional 300us safety margin
    const uint32_t delay_us = 1e6 * num_bytes * 10 / TORQEEDO_SERIAL_BAUD + 300;
    return delay_us;
}

// format of motor speed command packet
//
// Data Byte    Field Definition    Example Value   Comments
// ---------------------------------------------------------------------------------
// byte 0       Header              0xAC
// byte 1       SourceId?           0x00            0 = tiller?
// byte 2       Destination ID?     0x00            0 = all?
// byte 3       Command Id?         0x05            0=Stop? 4=Don'tTurn? 5=Turn?
// byte 4       Command Id?         0x00            0x20 if byte3=4, 0x0 is byte3=5
// byte 5       Motor Speed MSB     ----            Motor Speed MSB (-1000 to +1000)
// byte 6       Motor Speed LSB     ----            Motor Speed LSB (-1000 to +1000)
// byte 7       CRC-Maxim           ----            CRC-Maxim value
// byte 8       Footer              0xAD
//
// example message when rotating forwards:  "AC 00 00 05 00 00 ED 95 AD"    (+237)
// example message when rotating backwards: "AC 00 00 05 00 FF AE 2C 0C AD" (-82)


// send a motor speed command as a value from -1000 to +1000
// value is taken directly from SRV_Channel
void AP_Torqeedo::send_motor_speed_cmd()
{
    // calculate desired motor speed
    if (!hal.util->get_soft_armed()) {
        _motor_speed = 0;
    } else {
        // convert throttle output to motor output in range -1000 to +1000
        // ToDo: convert PWM output to motor output so that SERVOx_MIN, MAX and TRIM take effect
        _motor_speed = constrain_int16(SRV_Channels::get_output_norm(SRV_Channel::Aux_servo_function_t::k_throttle) * 1000.0, -1000, 1000);
    }

    // set send pin
    send_start();

    uint8_t mot_speed_cmd_buff[] = {TORQEEDO_PACKET_HEADER, 0x0, 0x0, 0x5, 0x0, HIGHBYTE(_motor_speed), LOWBYTE(_motor_speed), 0x0, TORQEEDO_PACKET_FOOTER};
    uint8_t buff_size = ARRAY_SIZE(mot_speed_cmd_buff);

    // calculate crc and add to buffer
    const uint8_t crc = crc8_maxim(&mot_speed_cmd_buff[1], buff_size-3);
    mot_speed_cmd_buff[buff_size-2] = crc;

    // write message
    _uart->write(mot_speed_cmd_buff, buff_size);

    _last_send_motor_us = AP_HAL::micros();
    _send_delay_us = calc_send_delay_us(buff_size);
}

// get the AP_Torqeedo singleton
AP_Torqeedo *AP_Torqeedo::get_singleton()
{
    return _singleton;
}

AP_Torqeedo *AP_Torqeedo::_singleton = nullptr;

namespace AP {
AP_Torqeedo *torqeedo()
{
    return AP_Torqeedo::get_singleton();
}
};

#endif // HAL_TORQEEDO_ENABLED