ardupilot/Rover/mode_loiter.cpp

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

81 lines
3.1 KiB
C++
Raw Normal View History

2018-04-28 03:31:31 -03:00
#include "Rover.h"
bool ModeLoiter::_enter()
{
// set _destination to reasonable stopping point
if (!g2.wp_nav.get_stopping_location(_destination)) {
return false;
}
2018-04-28 03:31:31 -03:00
// initialise desired speed to current speed
if (!attitude_control.get_forward_speed(_desired_speed)) {
_desired_speed = 0.0f;
}
// initialise heading to current heading
_desired_yaw_cd = ahrs.yaw_sensor;
return true;
}
void ModeLoiter::update()
{
// get distance (in meters) to destination
_distance_to_destination = rover.current_loc.get_distance(_destination);
2018-04-28 03:31:31 -03:00
2024-05-03 07:02:37 -03:00
const float loiter_radius = g2.sailboat.tack_enabled() ? g2.sailboat.get_loiter_radius() : g2.loit_radius;
2018-09-27 21:11:09 -03:00
// if within loiter radius slew desired speed towards zero and use existing desired heading
if (_distance_to_destination <= loiter_radius) {
2019-05-25 15:42:18 -03:00
// sailboats should not stop unless motoring
2024-05-03 07:02:37 -03:00
const float desired_speed_within_radius = g2.sailboat.tack_enabled() ? 0.1f : 0.0f;
2018-09-25 10:09:47 -03:00
_desired_speed = attitude_control.get_desired_speed_accel_limited(desired_speed_within_radius, rover.G_Dt);
// if we have a sail but not trying to use it then point into the wind
2024-05-03 07:02:37 -03:00
if (!g2.sailboat.tack_enabled() && g2.sailboat.sail_enabled()) {
_desired_yaw_cd = degrees(g2.windvane.get_true_wind_direction_rad()) * 100.0f;
}
2018-04-28 03:31:31 -03:00
} else {
// P controller with hard-coded gain to convert distance to desired speed
_desired_speed = MIN((_distance_to_destination - loiter_radius) * g2.loiter_speed_gain, g2.wp_nav.get_default_speed());
// calculate bearing to destination
_desired_yaw_cd = rover.current_loc.get_bearing_to(_destination);
float yaw_error_cd = wrap_180_cd(_desired_yaw_cd - ahrs.yaw_sensor);
2018-04-28 03:31:31 -03:00
// if destination is behind vehicle, reverse towards it
if ((fabsf(yaw_error_cd) > 9000 && g2.loit_type == 0) || g2.loit_type == 2) {
2018-04-28 03:31:31 -03:00
_desired_yaw_cd = wrap_180_cd(_desired_yaw_cd + 18000);
yaw_error_cd = wrap_180_cd(_desired_yaw_cd - ahrs.yaw_sensor);
2018-04-28 03:31:31 -03:00
_desired_speed = -_desired_speed;
}
// reduce desired speed if yaw_error is large
// 45deg of error reduces speed to 75%, 90deg of error reduces speed to 50%
float yaw_error_ratio = 1.0f - constrain_float(fabsf(yaw_error_cd / 9000.0f), 0.0f, 1.0f) * 0.5f;
2018-04-28 03:31:31 -03:00
_desired_speed *= yaw_error_ratio;
}
// 0 turn rate is no limit
float turn_rate = 0.0;
// make sure sailboats don't try and sail directly into the wind
if (g2.sailboat.use_indirect_route(_desired_yaw_cd)) {
_desired_yaw_cd = g2.sailboat.calc_heading(_desired_yaw_cd);
if (g2.sailboat.tacking()) {
// use pivot turn rate for tacks
turn_rate = g2.wp_nav.get_pivot_rate();
}
}
2018-04-28 03:31:31 -03:00
// run steering and throttle controllers
calc_steering_to_heading(_desired_yaw_cd, turn_rate);
calc_throttle(_desired_speed, true);
2018-04-28 03:31:31 -03:00
}
2019-05-17 03:55:31 -03:00
// get desired location
bool ModeLoiter::get_desired_location(Location& destination) const
{
destination = _destination;
return true;
}