ardupilot/libraries/AP_HAL/utility/ftoa_engine.cpp

231 lines
6.5 KiB
C++
Raw Normal View History

/* Copyright (c) 2005, Dmitry Xmelkov
All rights reserved.
Rewritten in C by Soren Kuula
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution.
* Neither the name of the copyright holders nor the names of
contributors may be used to endorse or promote products derived
from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE. */
#include <AP_HAL/AP_HAL.h>
#include <AP_Common/AP_Common.h>
#include "ftoa_engine.h"
#include <stdint.h>
#define PGM_INT8(addr) (int8_t)pgm_read_byte((const prog_char *)addr)
#define PGM_UINT32(addr) pgm_read_dword((const uint32_t *)addr)
/*
* 2^b ~= f * r * 10^e
* where
* i = b div 8
* r = 2^(b mod 8)
* f = factorTable[i]
* e = exponentTable[i]
*/
static const int8_t exponentTable[32] PROGMEM = {
-36, -33, -31, -29, -26, -24, -21, -19,
-17, -14, -12, -9, -7, -4, -2, 0,
3, 5, 8, 10, 12, 15, 17, 20,
22, 24, 27, 29, 32, 34, 36, 39
};
static const uint32_t factorTable[32] PROGMEM = {
2295887404UL,
587747175UL,
1504632769UL,
3851859889UL,
986076132UL,
2524354897UL,
646234854UL,
1654361225UL,
4235164736UL,
1084202172UL,
2775557562UL,
710542736UL,
1818989404UL,
465661287UL,
1192092896UL,
3051757813UL,
781250000UL,
2000000000UL,
512000000UL,
1310720000UL,
3355443200UL,
858993459UL,
2199023256UL,
562949953UL,
1441151881UL,
3689348815UL,
944473297UL,
2417851639UL,
618970020UL,
1584563250UL,
4056481921UL,
1038459372UL
};
int16_t ftoa_engine(float val, char *buf, uint8_t precision, uint8_t maxDecimals)
{
uint8_t flags;
// Bit reinterpretation hacks. This will ONLY work on little endian machines.
uint8_t *valbits = (uint8_t*)&val;
union {
float v;
uint32_t u;
} x;
x.v = val;
uint32_t frac = x.u & 0x007fffffUL;
if (precision>7) precision=7;
// Read the sign, shift the exponent in place and delete it from frac.
if (valbits[3] & (1<<7)) flags = FTOA_MINUS; else flags = 0;
uint8_t exp = valbits[3]<<1;
if(valbits[2] & (1<<7)) exp++; // TODO possible but in case of subnormal
// Test for easy cases, zero and NaN
if(exp==0 && frac==0) {
buf[0] = flags | FTOA_ZERO;
uint8_t i;
for(i=0; i<=precision; i++) {
buf[i+1] = '0';
}
return 0;
}
if(exp == 0xff) {
if(frac == 0) flags |= FTOA_INF; else flags |= FTOA_NAN;
}
// The implicit leading 1 is made explicit, except if value subnormal.
if (exp != 0) frac |= (1UL<<23);
uint8_t idx = exp>>3;
int8_t exp10 = PGM_INT8(&exponentTable[idx]);
// We COULD try making the multiplication in situ, where we make
// frac and a 64 bit int overlap in memory and select/weigh the
// upper 32 bits that way. For starters, this is less risky:
int64_t prod = (int64_t)frac * (int64_t)PGM_UINT32(&factorTable[idx]);
// The expConvFactorTable are factor are correct iff the lower 3 exponent
// bits are 1 (=7). Else we need to compensate by divding frac.
// If the lower 3 bits are 7 we are right.
// If the lower 3 bits are 6 we right-shift once
// ..
// If the lower 3 bits are 0 we right-shift 7x
prod >>= (15-(exp & 7));
// Now convert to decimal.
uint8_t hadNonzeroDigit = 0; // a flag
uint8_t outputIdx = 0;
int64_t decimal = 100000000000000ull;
do {
char digit = '0';
while(1) {// find the first nonzero digit or any of the next digits.
while ((prod -= decimal) >= 0)
digit++;
// Now we got too low. Fix it by adding again, once.
// it might appear more efficient to check before subtract, or
// to save and restore last nonnegative value - but in fact
// they take as long time and more space.
prod += decimal;
decimal /= 10;
// If already found a leading nonzero digit, accept zeros.
if (hadNonzeroDigit) break;
// Else, don't return results with a leading zero! Instead
// skip those and decrement exp10 accordingly.
if(digit == '0') {
exp10--;
continue;
}
hadNonzeroDigit = 1;
// Compute how many digits N to output.
if(maxDecimals != 0) { // If limiting decimals...
int8_t beforeDP = exp10+1; // Digits before point
if (beforeDP < 1) beforeDP = 1; // Numbers < 1 should also output at least 1 digit.
/*
* Below a simpler version of this:
int8_t afterDP = outputNum - beforeDP;
if (afterDP > maxDecimals-1)
afterDP = maxDecimals-1;
outputNum = beforeDP + afterDP;
*/
maxDecimals = maxDecimals+beforeDP-1;
if (precision > maxDecimals)
precision = maxDecimals;
} else {
precision++; // Output one more digit than the param value.
}
break;
}
// Now have a digit.
outputIdx++;
if(digit < '0' + 10) // normal case.
buf[outputIdx] = digit;
else {
// Abnormal case, write 9s and bail.
// We might as well abuse hadNonzeroDigit as counter, it will not be used again.
for(hadNonzeroDigit=outputIdx; hadNonzeroDigit>0; hadNonzeroDigit--)
buf[hadNonzeroDigit] = '9';
goto roundup; // this is ugly but it _is_ code derived from assembler :)
}
} while (outputIdx<precision);
// Rounding:
decimal *= 10;
if (prod - (decimal >> 1) >= 0) {
roundup:
// Increment digit, cascade
while(outputIdx != 0) {
if(++buf[outputIdx] == '0' + 10) {
if(outputIdx == 1) {
buf[outputIdx] = '1';
exp10++;
flags |= FTOA_CARRY;
break;
} else
buf[outputIdx--] = '0'; // and the loop continues, carrying to next digit.
}
else break;
}
}
buf[0] = flags;
return exp10;
}