ardupilot/libraries/AP_FETtecOneWire/AP_FETtecOneWire.h

/*
   This program is free software: you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation, either version 3 of the License, or
   (at your option) any later version.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

/* Initial protocol implementation was provided by FETtec */
/* Strongly modified by Amilcar Lucas, IAV GmbH */

#pragma once

#include <AP_HAL/AP_HAL.h>

#ifndef AP_FETTEC_ONEWIRE_ENABLED
#define AP_FETTEC_ONEWIRE_ENABLED !HAL_MINIMIZE_FEATURES && BOARD_FLASH_SIZE > 1024
#endif

// Support both full-duplex at 500Kbit/s as well as half-duplex at 2Mbit/s (optional feature)
#ifndef HAL_AP_FETTEC_HALF_DUPLEX
#define HAL_AP_FETTEC_HALF_DUPLEX 0
#endif

// Get static info from the ESCs (optional feature)
#ifndef HAL_AP_FETTEC_ONEWIRE_GET_STATIC_INFO
#define HAL_AP_FETTEC_ONEWIRE_GET_STATIC_INFO 0
#endif

// provide beep support (optional feature)
#ifndef HAL_AP_FETTEC_ESC_BEEP
#define HAL_AP_FETTEC_ESC_BEEP 0
#endif

// provide light support (optional feature)
#ifndef HAL_AP_FETTEC_ESC_LIGHT
#define HAL_AP_FETTEC_ESC_LIGHT 0
#endif

#if AP_FETTEC_ONEWIRE_ENABLED

#define FTW_DEBUGGING 0
#if FTW_DEBUGGING
#include <stdio.h>
#define fet_debug(fmt, args ...)  do {::fprintf(stderr,"FETtec: %s:%d: " fmt "\n", __FUNCTION__, __LINE__, ## args); } while(0)
#else
#define fet_debug(fmt, args ...)
#endif

#include <AP_ESC_Telem/AP_ESC_Telem.h>
#include <AP_Param/AP_Param.h>

#include <AP_Math/AP_Math.h>
#include <AP_Math/crc.h>

class AP_FETtecOneWire : public AP_ESC_Telem_Backend
{

public:
    AP_FETtecOneWire();

    /// Do not allow copies
    CLASS_NO_COPY(AP_FETtecOneWire);

    static const struct AP_Param::GroupInfo var_info[];

    static AP_FETtecOneWire *get_singleton() {
        return _singleton;
    }

    /// periodically called from SRV_Channels::push()
    void update();

    /// called from AP_Arming; should return false if arming should be
    /// disallowed
    bool pre_arm_check(char *failure_msg, const uint8_t failure_msg_len) const;

#if HAL_AP_FETTEC_ESC_BEEP
    /**
    makes all connected ESCs beep
    @param beep_frequency a 8 bit value from 0-255. higher make a higher beep
    */
    void beep(const uint8_t beep_frequency);
#endif

#if HAL_AP_FETTEC_ESC_LIGHT
    /**
    sets the racewire color for all ESCs
    @param r red brightness
    @param g green brightness
    @param b blue brightness
    */
    void led_color(const uint8_t r, const uint8_t g, const uint8_t b);
#endif

private:
    static AP_FETtecOneWire *_singleton;
    AP_HAL::UARTDriver *_uart;

    AP_Int32 _motor_mask_parameter;
    AP_Int32 _reverse_mask_parameter;
#if HAL_WITH_ESC_TELEM
    AP_Int8 _pole_count_parameter;
#endif

    static constexpr uint8_t FRAME_OVERHEAD = 6;          ///< OneWire message frame overhead (header+tail bytes)
    static constexpr uint8_t MAX_RECEIVE_LENGTH = 12;     ///< OneWire max receive message payload length in bytes
#if HAL_AP_FETTEC_ONEWIRE_GET_STATIC_INFO
    static constexpr uint8_t SERIAL_NUMBER_LENGTH = 12;   ///< ESC serial number length in bytes
#endif

    /**
        initialize the device driver: configure serial port, wake-up and configure ESCs
    */
    void init();

    /**
        initialize the serial port
    */
    void init_uart();

    /**
        scan the OneWire bus, configure the ESCs requested in the _motor_mask_parameter
    */
    void configure_escs();

    // states configured ESCs can be in:
    enum class ESCState : uint8_t {
        UNINITIALISED = 5,  // when we haven't tried to send anything to the ESC

        WANT_SEND_OK_TO_GET_RUNNING_SW_TYPE = 10,
        WAITING_OK_FOR_RUNNING_SW_TYPE = 11,

        WANT_SEND_START_FW = 20,
        WAITING_OK_FOR_START_FW = 21,

#if HAL_AP_FETTEC_ONEWIRE_GET_STATIC_INFO
        WANT_SEND_REQ_TYPE = 30,
        WAITING_ESC_TYPE = 31,

        WANT_SEND_REQ_SW_VER = 40,
        WAITING_SW_VER = 41,

        WANT_SEND_REQ_SN = 50,
        WAITING_SN = 51,
#endif

#if HAL_WITH_ESC_TELEM
        WANT_SEND_SET_TLM_TYPE = 60,
        WAITING_SET_TLM_TYPE_OK = 61,
#endif

        WANT_SEND_SET_FAST_COM_LENGTH = 70,
        WAITING_SET_FAST_COM_LENGTH_OK = 71,

        RUNNING = 100,
    };

    class ESC {
    public:

#if HAL_WITH_ESC_TELEM
        uint32_t last_telem_us;              ///< last time we got telemetry from this ESC
        uint16_t unexpected_telem;
        uint16_t error_count_at_throttle_count_overflow;            ///< overflow counter for error counter from the ESCs.
        bool telem_expected;                 ///< this ESC is fully configured and is now expected to send us telemetry
        bool telem_requested;                ///< this ESC is fully configured and at some point was requested to send us telemetry
#endif

        uint8_t id;         ///< FETtec ESC ID
        uint8_t servo_ofs;  ///< offset into ArduPilot servo array
        bool is_awake;
        void set_state(ESCState _state) {
            fet_debug("Moving ESC.id=%u from state=%u to state=%u", (unsigned)id, (unsigned)state, (unsigned)_state);
            state = _state;
        };
        ESCState state = ESCState::UNINITIALISED;

#if HAL_AP_FETTEC_ONEWIRE_GET_STATIC_INFO
        uint8_t serial_number[SERIAL_NUMBER_LENGTH];
        uint8_t firmware_version;
        uint8_t firmware_subversion;
        uint8_t type;
#endif
    };

    uint32_t _min_fast_throttle_period_us;  ///< minimum allowed fast-throttle command transmit period
    uint32_t _motor_mask;                    ///< an un-mutable copy of the _motor_mask_parameter taken before _init_done goes true
    uint32_t _reverse_mask;                  ///< a copy of the _reverse_mask_parameter taken while not armed
    uint32_t _running_mask;                  ///< a bitmask of the actively running ESCs
    uint32_t _last_transmit_us;             ///< last time the transmit() function sent data
    ESC *_escs;
    uint8_t _esc_count;                ///< number of allocated ESCs
    uint8_t _fast_throttle_byte_count; ///< pre-calculated number of bytes required to send an entire packed throttle message

#if HAL_AP_FETTEC_HALF_DUPLEX
    uint8_t _ignore_own_bytes; ///< bytes to ignore while receiving, because we have transmitted them ourselves
    uint8_t _last_crc;         ///< the CRC from the last sent fast-throttle command
    bool _use_hdplex;          ///< use asynchronous half-duplex serial communication
#endif

    bool _init_done;     ///< device driver is initialized; ESCs may still need to be configured
    bool _invalid_mask;  ///< true if the mask parameter is invalid

    enum class FrameSource : uint8_t {
        MASTER     = 0x01,  ///< master is always 0x01
        BOOTLOADER = 0x02,
        ESC        = 0x03,
    };

    enum class MsgType : uint8_t
    {
        OK                  = 0,
        BL_PAGE_CORRECT     = 1,  ///< Bootloader only
        NOT_OK              = 2,
        BL_START_FW         = 3,  ///< Bootloader only - exit the boot loader and start the standard firmware
        BL_PAGES_TO_FLASH   = 4,  ///< Bootloader only
#if HAL_AP_FETTEC_ONEWIRE_GET_STATIC_INFO
        REQ_TYPE            = 5,  ///< ESC type
        REQ_SN              = 6,  ///< serial number
        REQ_SW_VER          = 7,  ///< software version
#endif
#if HAL_AP_FETTEC_ESC_BEEP
        BEEP                = 13, ///< make noise
#endif
        SET_FAST_COM_LENGTH = 26, ///< configure fast-throttle command
        SET_TLM_TYPE        = 27, ///< telemetry operation mode
#if HAL_AP_FETTEC_ESC_LIGHT
        SET_LED_TMP_COLOR   = 51, ///< set ESC's LED color
#endif
    };

    /**
    a frame looks like:
    byte 1 = frame header (master is always 0x01)
    byte 2 = target ID (5bit)
    byte 3 & 4 = frame type (always 0x00, 0x00 used for bootloader. here just for compatibility)
    byte 5 = frame length over all bytes
    byte 6 - X = request type, followed by the payload
    byte X+1 = 8bit CRC
    */
    template <typename T>
    class PACKED PackedMessage {
    public:
        PackedMessage(uint8_t _esc_id, T _msg) :
            esc_id(_esc_id),
            msg(_msg)
        {
            update_checksum();
        }
        uint8_t frame_source { (uint8_t)FrameSource::MASTER };
        uint8_t esc_id;
        uint16_t frame_type { 0 };  // bootloader only, always zero
        uint8_t frame_length {sizeof(T) + FRAME_OVERHEAD};  // all bytes including frame_source and checksum
        T msg;
        uint8_t checksum;

        void update_checksum() {
            checksum = crc8_dvb_update(0, (const uint8_t*)this, frame_length-1);
        }
    };

    class PACKED OK {
    public:
        uint8_t msgid { (uint8_t)MsgType::OK };
    };

    class PACKED START_FW {
    public:
        uint8_t msgid { (uint8_t)MsgType::BL_START_FW };
    };

    class PACKED SET_FAST_COM_LENGTH {
    public:
        SET_FAST_COM_LENGTH(uint8_t _byte_count, uint8_t _min_esc_id, uint8_t _esc_count) :
            byte_count{_byte_count},
            min_esc_id{_min_esc_id},
            esc_count{_esc_count}
        { }
        uint8_t msgid { (uint8_t)MsgType::SET_FAST_COM_LENGTH };
        uint8_t byte_count;
        uint8_t min_esc_id;
        uint8_t esc_count;
    };

#if HAL_AP_FETTEC_ONEWIRE_GET_STATIC_INFO
    class PACKED REQ_TYPE {
    public:
        uint8_t msgid { (uint8_t)MsgType::REQ_TYPE };
    };

    class PACKED REQ_SW_VER {
    public:
        uint8_t msgid { (uint8_t)MsgType::REQ_SW_VER };
    };

    class PACKED REQ_SN {
    public:
        uint8_t msgid { (uint8_t)MsgType::REQ_SN };
    };

    class PACKED ESC_TYPE {
    public:
        ESC_TYPE(uint8_t _type) :
            type{_type} { }
        uint8_t type;
    };

    class PACKED SW_VER {
    public:
        SW_VER(uint8_t _version, uint8_t _subversion) :
            version{_version},
            subversion{_subversion}
            { }
        uint8_t version;
        uint8_t subversion;
    };

    class PACKED SN {
    public:
        SN(uint8_t *_sn, uint8_t snlen) {
            memcpy(sn, _sn, ARRAY_SIZE(sn));
        }
        uint8_t sn[SERIAL_NUMBER_LENGTH];
    };

#endif  // HAL_AP_FETTEC_ONEWIRE_GET_STATIC_INFO

    void pack_fast_throttle_command(const uint16_t *motor_values, uint8_t *buffer, const uint8_t length, const uint8_t esc_id_to_request_telem_from);

/*
 * Messages, methods and states for dealing with ESC telemetry
 */
#if HAL_WITH_ESC_TELEM
    void handle_message_telem(ESC &esc);

    uint16_t _fast_throttle_cmd_count;     ///< number of fast-throttle commands sent by the flight controller

    /// the ESC at this offset into _escs should be the next to send a
    /// telemetry request for:
    uint8_t _esc_ofs_to_request_telem_from;

    class PACKED SET_TLM_TYPE {
    public:
        SET_TLM_TYPE(uint8_t _tlm_type) :
            tlm_type{_tlm_type}
        { }
        uint8_t msgid { (uint8_t)MsgType::SET_TLM_TYPE };
        uint8_t tlm_type;
    };

    class PACKED TLM {
    public:
        TLM(int8_t _temp, uint16_t _voltage, uint16_t _current, int16_t _rpm, uint16_t _consumption_mah, uint16_t _tx_err_count) :
            temp{_temp},
            voltage{_voltage},
            current{_current},
            rpm{_rpm},
            consumption_mah{_consumption_mah},
            tx_err_count{_tx_err_count}
        { }
        int8_t temp;              // centi-degrees
        uint16_t voltage;         // centi-Volt
        uint16_t current;         // centi-Ampere  (signed?)
        int16_t rpm;              // centi-rpm
        uint16_t consumption_mah; // milli-Ampere.hour
        uint16_t tx_err_count;    // CRC error count, as perceived from the ESC receiving side
    };

#endif  // HAL_WITH_ESC_TELEM

#if HAL_AP_FETTEC_ESC_BEEP
    class PACKED Beep {
    public:
        Beep(uint8_t _beep_frequency) :
            beep_frequency{_beep_frequency}
        { }
        uint8_t msgid { (uint8_t)MsgType::BEEP };
        uint8_t beep_frequency;
        // add two zeros to make sure all ESCs can catch their command as we don't wait for a response here  (don't blame me --pb)
        uint16_t spacer = 0;
    };
#endif // HAL_AP_FETTEC_ESC_BEEP

#if HAL_AP_FETTEC_ESC_LIGHT
    class PACKED LEDColour {
    public:
        LEDColour(uint8_t _r, uint8_t _g, uint8_t _b) :
            r{_r},
            g{_g},
            b{_b}
          { }
        uint8_t msgid { (uint8_t)MsgType::SET_LED_TMP_COLOR };
        uint8_t r;
        uint8_t g;
        uint8_t b;
        // add two zeros to make sure all ESCs can catch their command as we don't wait for a response here  (don't blame me --pb)
        uint16_t spacer = 0;
    };
#endif  // HAL_AP_FETTEC_ESC_LIGHT

    /*
     * Methods and data for transmitting data to the ESCSs:
     */

    /**
        transmits data to ESCs
        @param bytes  bytes to transmit
        @param length number of bytes to transmit
        @return false there's no space in the UART for this message
    */
    bool transmit(const uint8_t* bytes, const uint8_t length);

    template <typename T>
    bool transmit(const PackedMessage<T> &msg) {
        return transmit((const uint8_t*)&msg, sizeof(msg));
    }

    /**
        transmits configuration request data to ESCs
        @param bytes  bytes to transmit
        @param length number of bytes to transmit
        @return false if vehicle armed or there's no space in the UART for this message
    */
    bool transmit_config_request(const uint8_t* bytes, const uint8_t length);

    template <typename T>
    bool transmit_config_request(const PackedMessage<T> &msg) {
        return transmit_config_request((const uint8_t*)&msg, sizeof(msg));
    }

    /**
        sends a single fast-throttle frame containing the throttle for all configured OneWire ESCs.
        @param motor_values a 16bit array containing the throttle values that should be sent to the motors. 0-2000 where 1001-2000 is positive rotation and 999-0 reversed rotation
    */
    void escs_set_values(const uint16_t *motor_values);

    /*
     * Methods and data for receiving data from the ESCs:
     */

    // FIXME: this should be tighter - and probably calculated.  Note
    // that we can't request telemetry faster than the loop interval,
    // which is 20ms on Plane, so that puts a constraint here.  When
    // using fast-throttle with 12 ESCs on Plane you could expect
    // 240ms between telem updates.  Why you have a Plane with 12 ESCs
    // is a bit of a puzzle.
    static const uint32_t max_telem_interval_us = 100000;

    void handle_message(ESC &esc, const uint8_t length);

    /**
        reads data from the UART, calling handle_message on any message found
    */
    void read_data_from_uart();
    union MessageUnion {
        MessageUnion() { }
        PackedMessage<OK> packed_ok;
#if HAL_AP_FETTEC_ONEWIRE_GET_STATIC_INFO
        PackedMessage<ESC_TYPE> packed_esc_type;
        PackedMessage<SW_VER> packed_sw_ver;
        PackedMessage<SN> packed_sn;
#endif
#if HAL_WITH_ESC_TELEM
        PackedMessage<TLM> packed_tlm;
#endif
        uint8_t receive_buf[FRAME_OVERHEAD + MAX_RECEIVE_LENGTH];
    } u;

    static_assert(sizeof(u.packed_ok) <= sizeof(u.receive_buf),"packed_ok does not fit in receive_buf. MAX_RECEIVE_LENGTH too small?");
#if HAL_AP_FETTEC_ONEWIRE_GET_STATIC_INFO
    static_assert(sizeof(u.packed_esc_type) <= sizeof(u.receive_buf),"packed_esc_type does not fit in receive_buf. MAX_RECEIVE_LENGTH too small?");
    static_assert(sizeof(u.packed_sw_ver) <= sizeof(u.receive_buf),"packed_sw_ver does not fit in receive_buf. MAX_RECEIVE_LENGTH too small?");
    static_assert(sizeof(u.packed_sn) <= sizeof(u.receive_buf),"packed_sn does not fit in receive_buf. MAX_RECEIVE_LENGTH too small?");
#endif
#if HAL_WITH_ESC_TELEM
    static_assert(sizeof(u.packed_tlm) <= sizeof(u.receive_buf),"packed_tlm does not fit in receive_buf. MAX_RECEIVE_LENGTH too small?");
#endif

    uint16_t _unknown_esc_message;
    uint16_t _message_invalid_in_state_count;
    uint16_t _period_too_short;
    uint16_t crc_rec_err_cnt;
    uint8_t _receive_buf_used;

    /// shifts data to start of buffer based on magic header bytes
    void move_frame_source_in_receive_buffer(const uint8_t search_start_pos = 0);

    /// cut n bytes from start of buffer
    void consume_bytes(const uint8_t n);

    /// returns true if the first message in the buffer is OK
    bool buffer_contains_ok(const uint8_t length);
};
#endif // AP_FETTEC_ONEWIRE_ENABLED