ardupilot/libraries/AP_HAL_PX4/Storage.cpp

310 lines
8.7 KiB
C++
Raw Normal View History

#include <AP_HAL/AP_HAL.h>
#if CONFIG_HAL_BOARD == HAL_BOARD_PX4
#include <assert.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
#include <errno.h>
#include <stdio.h>
#include <ctype.h>
#include "Storage.h"
using namespace PX4;
/*
This stores eeprom data in the PX4 MTD interface with a 4k size, and
a in-memory buffer. This keeps the latency and devices IOs down.
*/
// name the storage file after the sketch so you can use the same sd
// card for ArduCopter and ArduPlane
#define STORAGE_DIR "/fs/microsd/APM"
#define OLD_STORAGE_FILE STORAGE_DIR "/" SKETCHNAME ".stg"
#define OLD_STORAGE_FILE_BAK STORAGE_DIR "/" SKETCHNAME ".bak"
//#define SAVE_STORAGE_FILE STORAGE_DIR "/" SKETCHNAME ".sav"
#define MTD_PARAMS_FILE "/fs/mtd"
#define MTD_SIGNATURE 0x14012014
#define MTD_SIGNATURE_OFFSET (8192-4)
#define STORAGE_RENAME_OLD_FILE 0
extern const AP_HAL::HAL& hal;
PX4Storage::PX4Storage(void) :
_fd(-1),
_dirty_mask(0),
_perf_storage(perf_alloc(PC_ELAPSED, "APM_storage")),
_perf_errors(perf_alloc(PC_COUNT, "APM_storage_errors"))
{
}
/*
get signature from bytes at offset MTD_SIGNATURE_OFFSET
*/
uint32_t PX4Storage::_mtd_signature(void)
{
int mtd_fd = open(MTD_PARAMS_FILE, O_RDONLY);
if (mtd_fd == -1) {
AP_HAL::panic("Failed to open " MTD_PARAMS_FILE);
}
uint32_t v;
if (lseek(mtd_fd, MTD_SIGNATURE_OFFSET, SEEK_SET) != MTD_SIGNATURE_OFFSET) {
AP_HAL::panic("Failed to seek in " MTD_PARAMS_FILE);
}
bus_lock(true);
if (read(mtd_fd, &v, sizeof(v)) != sizeof(v)) {
AP_HAL::panic("Failed to read signature from " MTD_PARAMS_FILE);
}
bus_lock(false);
close(mtd_fd);
return v;
}
/*
put signature bytes at offset MTD_SIGNATURE_OFFSET
*/
void PX4Storage::_mtd_write_signature(void)
{
int mtd_fd = open(MTD_PARAMS_FILE, O_WRONLY);
if (mtd_fd == -1) {
AP_HAL::panic("Failed to open " MTD_PARAMS_FILE);
}
uint32_t v = MTD_SIGNATURE;
if (lseek(mtd_fd, MTD_SIGNATURE_OFFSET, SEEK_SET) != MTD_SIGNATURE_OFFSET) {
AP_HAL::panic("Failed to seek in " MTD_PARAMS_FILE);
}
bus_lock(true);
if (write(mtd_fd, &v, sizeof(v)) != sizeof(v)) {
AP_HAL::panic("Failed to write signature in " MTD_PARAMS_FILE);
}
bus_lock(false);
close(mtd_fd);
}
/*
upgrade from microSD to MTD (FRAM)
*/
void PX4Storage::_upgrade_to_mtd(void)
{
// the MTD is completely uninitialised - try to get a
// copy from OLD_STORAGE_FILE
int old_fd = open(OLD_STORAGE_FILE, O_RDONLY);
if (old_fd == -1) {
::printf("Failed to open %s\n", OLD_STORAGE_FILE);
return;
}
int mtd_fd = open(MTD_PARAMS_FILE, O_WRONLY);
if (mtd_fd == -1) {
AP_HAL::panic("Unable to open MTD for upgrade");
}
if (::read(old_fd, _buffer, sizeof(_buffer)) != sizeof(_buffer)) {
close(old_fd);
close(mtd_fd);
::printf("Failed to read %s\n", OLD_STORAGE_FILE);
return;
}
close(old_fd);
ssize_t ret;
bus_lock(true);
if ((ret=::write(mtd_fd, _buffer, sizeof(_buffer))) != sizeof(_buffer)) {
::printf("mtd write of %u bytes returned %d errno=%d\n", sizeof(_buffer), ret, errno);
AP_HAL::panic("Unable to write MTD for upgrade");
}
bus_lock(false);
close(mtd_fd);
#if STORAGE_RENAME_OLD_FILE
rename(OLD_STORAGE_FILE, OLD_STORAGE_FILE_BAK);
#endif
::printf("Upgraded MTD from %s\n", OLD_STORAGE_FILE);
}
void PX4Storage::_storage_open(void)
{
if (_initialised) {
return;
}
struct stat st;
_have_mtd = (stat(MTD_PARAMS_FILE, &st) == 0);
// PX4 should always have /fs/mtd_params
if (!_have_mtd) {
AP_HAL::panic("Failed to find " MTD_PARAMS_FILE);
}
/*
cope with upgrading from OLD_STORAGE_FILE to MTD
*/
bool good_signature = (_mtd_signature() == MTD_SIGNATURE);
if (stat(OLD_STORAGE_FILE, &st) == 0) {
if (good_signature) {
#if STORAGE_RENAME_OLD_FILE
rename(OLD_STORAGE_FILE, OLD_STORAGE_FILE_BAK);
#endif
} else {
_upgrade_to_mtd();
}
}
// we write the signature every time, even if it already is
// good, as this gives us a way to detect if the MTD device is
// functional. It is better to panic now than to fail to save
// parameters in flight
_mtd_write_signature();
_dirty_mask = 0;
int fd = open(MTD_PARAMS_FILE, O_RDONLY);
if (fd == -1) {
AP_HAL::panic("Failed to open " MTD_PARAMS_FILE);
}
const uint16_t chunk_size = 128;
for (uint16_t ofs=0; ofs<sizeof(_buffer); ofs += chunk_size) {
bus_lock(true);
ssize_t ret = read(fd, &_buffer[ofs], chunk_size);
bus_lock(false);
if (ret != chunk_size) {
::printf("storage read of %u bytes at %u to %p failed - got %d errno=%d\n",
(unsigned)sizeof(_buffer), (unsigned)ofs, &_buffer[ofs], (int)ret, (int)errno);
AP_HAL::panic("Failed to read " MTD_PARAMS_FILE);
}
}
close(fd);
#ifdef SAVE_STORAGE_FILE
fd = open(SAVE_STORAGE_FILE, O_WRONLY|O_CREAT|O_TRUNC, 0644);
if (fd != -1) {
write(fd, _buffer, sizeof(_buffer));
close(fd);
::printf("Saved storage file %s\n", SAVE_STORAGE_FILE);
}
#endif
_initialised = true;
}
/*
mark some lines as dirty. Note that there is no attempt to avoid
the race condition between this code and the _timer_tick() code
below, which both update _dirty_mask. If we lose the race then the
result is that a line is written more than once, but it won't result
in a line not being written.
*/
void PX4Storage::_mark_dirty(uint16_t loc, uint16_t length)
{
uint16_t end = loc + length;
for (uint8_t line=loc>>PX4_STORAGE_LINE_SHIFT;
line <= end>>PX4_STORAGE_LINE_SHIFT;
line++) {
_dirty_mask |= 1U << line;
}
}
void PX4Storage::read_block(void *dst, uint16_t loc, size_t n)
{
if (loc >= sizeof(_buffer)-(n-1)) {
return;
}
_storage_open();
memcpy(dst, &_buffer[loc], n);
}
void PX4Storage::write_block(uint16_t loc, const void *src, size_t n)
{
if (loc >= sizeof(_buffer)-(n-1)) {
return;
}
if (memcmp(src, &_buffer[loc], n) != 0) {
_storage_open();
memcpy(&_buffer[loc], src, n);
_mark_dirty(loc, n);
}
}
void PX4Storage::bus_lock(bool lock)
{
#if defined (CONFIG_ARCH_BOARD_PX4FMU_V4)
/*
this is needed on Pixracer where the ms5611 may be on the same
bus as FRAM, and the NuttX ramtron driver does not go via the
PX4 spi bus abstraction. The ramtron driver relies on
SPI_LOCK(). We need to prevent the ms5611 reads which happen in
interrupt context from interfering with the FRAM operations. As
the px4 spi bus abstraction just uses interrupt blocking as the
locking mechanism we need to block interrupts here as well.
*/
if (lock) {
irq_state = irqsave();
} else {
irqrestore(irq_state);
}
#endif
}
void PX4Storage::_timer_tick(void)
{
if (!_initialised || _dirty_mask == 0) {
return;
}
perf_begin(_perf_storage);
if (_fd == -1) {
_fd = open(MTD_PARAMS_FILE, O_WRONLY);
if (_fd == -1) {
perf_end(_perf_storage);
perf_count(_perf_errors);
return;
}
}
// write out the first dirty set of lines. We don't write more
// than one to keep the latency of this call to a minimum
uint8_t i, n;
for (i=0; i<PX4_STORAGE_NUM_LINES; i++) {
if (_dirty_mask & (1<<i)) {
break;
}
}
if (i == PX4_STORAGE_NUM_LINES) {
// this shouldn't be possible
perf_end(_perf_storage);
perf_count(_perf_errors);
return;
}
uint32_t write_mask = (1U<<i);
// see how many lines to write
for (n=1; (i+n) < PX4_STORAGE_NUM_LINES &&
2013-01-27 00:04:47 -04:00
n < (PX4_STORAGE_MAX_WRITE>>PX4_STORAGE_LINE_SHIFT); n++) {
if (!(_dirty_mask & (1<<(n+i)))) {
break;
}
// mark that line clean
write_mask |= (1<<(n+i));
}
/*
write the lines. This also updates _dirty_mask. Note that
because this is a SCHED_FIFO thread it will not be preempted
by the main task except during blocking calls. This means we
don't need a semaphore around the _dirty_mask updates.
*/
if (lseek(_fd, i<<PX4_STORAGE_LINE_SHIFT, SEEK_SET) == (i<<PX4_STORAGE_LINE_SHIFT)) {
_dirty_mask &= ~write_mask;
bus_lock(true);
ssize_t ret = write(_fd, &_buffer[i<<PX4_STORAGE_LINE_SHIFT], n<<PX4_STORAGE_LINE_SHIFT);
bus_lock(false);
if (ret != n<<PX4_STORAGE_LINE_SHIFT) {
// write error - likely EINTR
_dirty_mask |= write_mask;
close(_fd);
_fd = -1;
perf_count(_perf_errors);
}
}
perf_end(_perf_storage);
}
#endif // CONFIG_HAL_BOARD