ardupilot/libraries/AP_Proximity/AP_Proximity_RPLidarA2.h

127 lines
4.1 KiB
C
Raw Normal View History

/*
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
* ArduPilot device driver for SLAMTEC RPLIDAR A2 (16m range version)
*
* ALL INFORMATION REGARDING PROTOCOL WAS DERIVED FROM RPLIDAR DATASHEET:
*
* https://www.slamtec.com/en/Lidar
* http://bucket.download.slamtec.com/63ac3f0d8c859d3a10e51c6b3285fcce25a47357/LR001_SLAMTEC_rplidar_protocol_v1.0_en.pdf
*
* Author: Steven Josefs, IAV GmbH
* Based on the LightWare SF40C ArduPilot device driver from Randy Mackay
*
*/
#pragma once
#include "AP_Proximity_config.h"
#if AP_PROXIMITY_RPLIDARA2_ENABLED
#include "AP_Proximity_Backend_Serial.h"
class AP_Proximity_RPLidarA2 : public AP_Proximity_Backend_Serial
{
public:
using AP_Proximity_Backend_Serial::AP_Proximity_Backend_Serial;
// update state
void update(void) override;
// get maximum and minimum distances (in meters) of sensor
float distance_max() const override;
float distance_min() const override;
private:
enum rp_state {
rp_unknown = 0,
rp_resetted,
rp_responding,
rp_measurements,
rp_health
};
enum ResponseType {
ResponseType_Descriptor = 0,
ResponseType_SCAN,
ResponseType_EXPRESS,
ResponseType_Health
};
// initialise sensor (returns true if sensor is successfully initialised)
bool initialise();
void set_scan_mode();
// send request for something from sensor
void send_request_for_health();
void parse_response_data();
void parse_response_descriptor();
void get_readings();
void reset_rplidar();
// reply related variables
uint8_t _descriptor[7];
char _rp_systeminfo[63];
bool _descriptor_data;
bool _information_data;
bool _resetted;
bool _initialised;
uint8_t _payload_length;
uint8_t _cnt;
uint8_t _sync_error ;
uint16_t _byte_count;
// request related variables
enum ResponseType _response_type; ///< response from the lidar
enum rp_state _rp_state;
uint32_t _last_request_ms; ///< system time of last request
uint32_t _last_distance_received_ms; ///< system time of last distance measurement received from sensor
uint32_t _last_reset_ms;
// face related variables
AP_Proximity_Boundary_3D::Face _last_face;///< last face requested
float _last_angle_deg; ///< yaw angle (in degrees) of _last_distance_m
float _last_distance_m; ///< shortest distance for _last_face
bool _last_distance_valid; ///< true if _last_distance_m is valid
struct PACKED _sensor_scan {
uint8_t startbit : 1; ///< on the first revolution 1 else 0
uint8_t not_startbit : 1; ///< complementary to startbit
uint8_t quality : 6; ///< Related the reflected laser pulse strength
uint8_t checkbit : 1; ///< always set to 1
uint16_t angle_q6 : 15; ///< Actual heading = angle_q6/64.0 Degree
uint16_t distance_q2 : 16; ///< Actual Distance = distance_q2/4.0 mm
};
struct PACKED _sensor_health {
uint8_t status; ///< status definition: 0 good, 1 warning, 2 error
uint16_t error_code; ///< the related error code
};
union PACKED {
DEFINE_BYTE_ARRAY_METHODS
_sensor_scan sensor_scan;
_sensor_health sensor_health;
} payload;
};
#endif // AP_PROXIMITY_RPLIDARA2_ENABLED