ardupilot/ArduCopter/mode_smart_rtl.cpp

199 lines
6.7 KiB
C++
Raw Normal View History

2017-07-26 14:14:40 -03:00
#include "Copter.h"
#if MODE_SMARTRTL_ENABLED == ENABLED
2017-07-26 14:14:40 -03:00
/*
2017-09-08 23:45:31 -03:00
* Init and run calls for Smart_RTL flight mode
2017-07-26 14:14:40 -03:00
*
* This code uses the SmartRTL path that is already in memory, and feeds it into WPNav, one point at a time.
2017-07-26 14:14:40 -03:00
* Once the copter is close to home, it will run a standard land controller.
*/
bool ModeSmartRTL::init(bool ignore_checks)
2017-07-26 14:14:40 -03:00
{
2019-02-27 23:56:36 -04:00
if (g2.smart_rtl.is_active()) {
2017-07-26 14:14:40 -03:00
// initialise waypoint and spline controller
wp_nav->wp_and_spline_init();
// set current target to a reasonable stopping point
Vector3f stopping_point;
pos_control->get_stopping_point_xy(stopping_point);
pos_control->get_stopping_point_z(stopping_point);
wp_nav->set_wp_destination(stopping_point);
// initialise yaw to obey user parameter
auto_yaw.set_mode_to_default(true);
2017-07-26 14:14:40 -03:00
// wait for cleanup of return path
smart_rtl_state = SmartRTL_WaitForPathCleanup;
2017-07-26 14:14:40 -03:00
return true;
}
return false;
2017-07-26 14:14:40 -03:00
}
2017-09-08 23:45:31 -03:00
// perform cleanup required when leaving smart_rtl
void ModeSmartRTL::exit()
2017-07-26 14:14:40 -03:00
{
2017-09-08 23:45:31 -03:00
g2.smart_rtl.cancel_request_for_thorough_cleanup();
2017-07-26 14:14:40 -03:00
}
void ModeSmartRTL::run()
2017-07-26 14:14:40 -03:00
{
2017-09-08 23:45:31 -03:00
switch (smart_rtl_state) {
case SmartRTL_WaitForPathCleanup:
wait_cleanup_run();
2017-07-26 14:14:40 -03:00
break;
case SmartRTL_PathFollow:
path_follow_run();
2017-07-26 14:14:40 -03:00
break;
case SmartRTL_PreLandPosition:
pre_land_position_run();
2017-07-26 14:14:40 -03:00
break;
case SmartRTL_Descend:
descent_run(); // Re-using the descend method from normal rtl mode.
2017-07-26 14:14:40 -03:00
break;
case SmartRTL_Land:
land_run(true); // Re-using the land method from normal rtl mode.
2017-07-26 14:14:40 -03:00
break;
}
}
bool ModeSmartRTL::is_landing() const
{
return smart_rtl_state == SmartRTL_Land;
}
void ModeSmartRTL::wait_cleanup_run()
2017-07-26 14:14:40 -03:00
{
// hover at current target position
motors->set_desired_spool_state(AP_Motors::DesiredSpoolState::THROTTLE_UNLIMITED);
2017-07-26 14:14:40 -03:00
wp_nav->update_wpnav();
pos_control->update_z_controller();
attitude_control->input_euler_angle_roll_pitch_yaw(wp_nav->get_roll(), wp_nav->get_pitch(), auto_yaw.yaw(),true);
2017-07-26 14:14:40 -03:00
// check if return path is computed and if yes, begin journey home
2017-09-08 23:45:31 -03:00
if (g2.smart_rtl.request_thorough_cleanup()) {
path_follow_last_pop_fail_ms = 0;
smart_rtl_state = SmartRTL_PathFollow;
2017-07-26 14:14:40 -03:00
}
}
void ModeSmartRTL::path_follow_run()
2017-07-26 14:14:40 -03:00
{
2018-04-29 17:48:43 -03:00
float target_yaw_rate = 0.0f;
if (!copter.failsafe.radio) {
// get pilot's desired yaw rate
target_yaw_rate = get_pilot_desired_yaw_rate(channel_yaw->get_control_in());
if (!is_zero(target_yaw_rate)) {
auto_yaw.set_mode(AUTO_YAW_HOLD);
}
}
2017-07-26 14:14:40 -03:00
// if we are close to current target point, switch the next point to be our target.
if (wp_nav->reached_wp_destination()) {
Vector3f next_point;
// this pop_point can fail if the IO task currently has the
// path semaphore.
2017-09-08 23:45:31 -03:00
if (g2.smart_rtl.pop_point(next_point)) {
path_follow_last_pop_fail_ms = 0;
bool fast_waypoint = true;
2017-09-08 23:45:31 -03:00
if (g2.smart_rtl.get_num_points() == 0) {
// this is the very last point, add 2m to the target alt and move to pre-land state
2017-07-26 14:14:40 -03:00
next_point.z -= 2.0f;
smart_rtl_state = SmartRTL_PreLandPosition;
fast_waypoint = false;
2017-07-26 14:14:40 -03:00
}
// send target to waypoint controller
wp_nav->set_wp_destination_NED(next_point);
wp_nav->set_fast_waypoint(fast_waypoint);
} else if (g2.smart_rtl.get_num_points() == 0) {
// We should never get here; should always have at least
// two points and the "zero points left" is handled above.
INTERNAL_ERROR(AP_InternalError::error_t::flow_of_control);
smart_rtl_state = SmartRTL_PreLandPosition;
} else if (path_follow_last_pop_fail_ms == 0) {
// first time we've failed to pop off (ever, or after a success)
path_follow_last_pop_fail_ms = AP_HAL::millis();
} else if (AP_HAL::millis() - path_follow_last_pop_fail_ms > 10000) {
// we failed to pop a point off for 10 seconds. This is
// almost certainly a bug.
INTERNAL_ERROR(AP_InternalError::error_t::flow_of_control);
smart_rtl_state = SmartRTL_PreLandPosition;
2017-07-26 14:14:40 -03:00
}
}
// update controllers
motors->set_desired_spool_state(AP_Motors::DesiredSpoolState::THROTTLE_UNLIMITED);
2017-07-26 14:14:40 -03:00
wp_nav->update_wpnav();
pos_control->update_z_controller();
// call attitude controller
if (auto_yaw.mode() == AUTO_YAW_HOLD) {
2017-07-26 14:14:40 -03:00
// roll & pitch from waypoint controller, yaw rate from pilot
2018-04-29 17:48:43 -03:00
attitude_control->input_euler_angle_roll_pitch_euler_rate_yaw(wp_nav->get_roll(), wp_nav->get_pitch(), target_yaw_rate);
2017-07-26 14:14:40 -03:00
} else {
// roll, pitch from waypoint controller, yaw heading from auto_heading()
attitude_control->input_euler_angle_roll_pitch_yaw(wp_nav->get_roll(), wp_nav->get_pitch(), auto_yaw.yaw(), true);
2017-07-26 14:14:40 -03:00
}
}
void ModeSmartRTL::pre_land_position_run()
2017-07-26 14:14:40 -03:00
{
// if we are close to 2m above start point, we are ready to land.
if (wp_nav->reached_wp_destination()) {
// choose descend and hold, or land based on user parameter rtl_alt_final
if (g.rtl_alt_final <= 0 || copter.failsafe.radio) {
land_start();
smart_rtl_state = SmartRTL_Land;
2017-07-26 14:14:40 -03:00
} else {
set_descent_target_alt(copter.g.rtl_alt_final);
descent_start();
smart_rtl_state = SmartRTL_Descend;
2017-07-26 14:14:40 -03:00
}
}
// update controllers
motors->set_desired_spool_state(AP_Motors::DesiredSpoolState::THROTTLE_UNLIMITED);
2017-07-26 14:14:40 -03:00
wp_nav->update_wpnav();
pos_control->update_z_controller();
attitude_control->input_euler_angle_roll_pitch_yaw(wp_nav->get_roll(), wp_nav->get_pitch(), auto_yaw.yaw(), true);
2017-07-26 14:14:40 -03:00
}
2017-09-08 23:45:31 -03:00
// save current position for use by the smart_rtl flight mode
void ModeSmartRTL::save_position()
2017-07-26 14:14:40 -03:00
{
const bool should_save_position = motors->armed() && (copter.control_mode != Mode::Number::SMART_RTL);
2017-07-26 14:14:40 -03:00
copter.g2.smart_rtl.update(copter.position_ok(), should_save_position);
2017-07-26 14:14:40 -03:00
}
2019-06-05 07:47:32 -03:00
bool ModeSmartRTL::get_wp(Location& destination)
{
// provide target in states which use wp_nav
switch (smart_rtl_state) {
case SmartRTL_WaitForPathCleanup:
case SmartRTL_PathFollow:
case SmartRTL_PreLandPosition:
case SmartRTL_Descend:
return wp_nav->get_wp_destination(destination);
case SmartRTL_Land:
return false;
}
// we should never get here but just in case
return false;
}
uint32_t ModeSmartRTL::wp_distance() const
{
return wp_nav->get_wp_distance_to_destination();
}
int32_t ModeSmartRTL::wp_bearing() const
{
return wp_nav->get_wp_bearing_to_destination();
}
#endif