ardupilot/libraries/AP_HAL_AVR/UARTDriver.cpp

// -*- Mode: C++; c-basic-offset: 8; indent-tabs-mode: nil -*-
//
//      Copyright (c) 2010 Michael Smith. All rights reserved.
//
// This is free software; you can redistribute it and/or modify it under
// the terms of the GNU Lesser General Public License as published by the
// Free Software Foundation; either version 2.1 of the License, or (at
// your option) any later version.
//

#include <limits.h>
#include <stdlib.h>
#include <stdarg.h>

#include <avr/pgmspace.h>

#include <AP_HAL.h>

#include "vprintf.h"
#include "UARTDriver.h"
using namespace AP_HAL_AVR;

#define FS_MAX_PORTS 4
AVRUARTDriver::Buffer __AVRUARTDriver__rxBuffer[FS_MAX_PORTS];
AVRUARTDriver::Buffer __AVRUARTDriver__txBuffer[FS_MAX_PORTS];

AVRUARTDriver::AVRUARTDriver(
        const uint8_t portNumber, volatile uint8_t *ubrrh,
        volatile uint8_t *ubrrl, volatile uint8_t *ucsra,
        volatile uint8_t *ucsrb, const uint8_t u2x,
		const uint8_t portEnableBits, const uint8_t portTxBits) :
			_ubrrh(ubrrh),
			_ubrrl(ubrrl),
			_ucsra(ucsra),
			_ucsrb(ucsrb),
			_u2x(u2x),
			_portEnableBits(portEnableBits),
			_portTxBits(portTxBits),
			_rxBuffer(&__AVRUARTDriver__rxBuffer[portNumber]),
			_txBuffer(&__AVRUARTDriver__txBuffer[portNumber])
{
	_initialized = true;
	begin(57600);
}
/* UARTDriver method implementations */

void AVRUARTDriver::begin(long baud, unsigned int rxSpace, unsigned int txSpace) {
	uint16_t ubrr;
	bool use_u2x = true;
	bool need_allocate = true;

	// if we are currently open...
	if (_open) {
		// If the caller wants to preserve the buffer sizing, work out what
		// it currently is...
		if (0 == rxSpace)
			rxSpace = _rxBuffer->mask + 1;
		if (0 == txSpace)
			txSpace = _txBuffer->mask + 1;

		if (rxSpace == (_rxBuffer->mask + 1) && 
			txSpace == (_txBuffer->mask + 1)) {
			// avoid re-allocating the buffers if possible
			need_allocate = false;
			*_ucsrb &= ~(_portEnableBits | _portTxBits);
		} else {
			// close the port in its current configuration, clears _open
			end();
		}
	}

	if (need_allocate) {
		// allocate buffers
		if (!_allocBuffer(_rxBuffer, rxSpace ? : _default_rx_buffer_size) || !_allocBuffer(_txBuffer, txSpace ?	: _default_tx_buffer_size)) {
			end();
			return; // couldn't allocate buffers - fatal
		}
	}

	// reset buffer pointers
	_txBuffer->head = _txBuffer->tail = 0;
	_rxBuffer->head = _rxBuffer->tail = 0;

	// mark the port as open
	_open = true;

	// If the user has supplied a new baud rate, compute the new UBRR value.
	if (baud > 0) {
#if F_CPU == 16000000UL
		// hardcoded exception for compatibility with the bootloader shipped
		// with the Duemilanove and previous boards and the firmware on the 8U2
		// on the Uno and Mega 2560.
		if (baud == 57600)
			use_u2x = false;
#endif

		if (use_u2x) {
			*_ucsra = 1 << _u2x;
			ubrr = (F_CPU / 4 / baud - 1) / 2;
		} else {
			*_ucsra = 0;
			ubrr = (F_CPU / 8 / baud - 1) / 2;
		}

		*_ubrrh = ubrr >> 8;
		*_ubrrl = ubrr;
	}

	*_ucsrb |= _portEnableBits;

}

void AVRUARTDriver::end() {
	*_ucsrb &= ~(_portEnableBits | _portTxBits);

	_freeBuffer(_rxBuffer);
	_freeBuffer(_txBuffer);
	_open = false;
}

int AVRUARTDriver::available(void) {
	if (!_open)
		return (-1);
	return ((_rxBuffer->head - _rxBuffer->tail) & _rxBuffer->mask);
}



int AVRUARTDriver::txspace(void) {
	if (!_open)
		return (-1);
	return ((_txBuffer->mask+1) - ((_txBuffer->head - _txBuffer->tail) & _txBuffer->mask));
}

int AVRUARTDriver::read(void) {
	uint8_t c;

	// if the head and tail are equal, the buffer is empty
	if (!_open || (_rxBuffer->head == _rxBuffer->tail))
		return (-1);

	// pull character from tail
	c = _rxBuffer->bytes[_rxBuffer->tail];
	_rxBuffer->tail = (_rxBuffer->tail + 1) & _rxBuffer->mask;

	return (c);
}

int AVRUARTDriver::peek(void) {

	// if the head and tail are equal, the buffer is empty
	if (!_open || (_rxBuffer->head == _rxBuffer->tail))
		return (-1);

	// pull character from tail
	return (_rxBuffer->bytes[_rxBuffer->tail]);
}

void AVRUARTDriver::flush(void) {
	// don't reverse this or there may be problems if the RX interrupt
	// occurs after reading the value of _rxBuffer->head but before writing
	// the value to _rxBuffer->tail; the previous value of head
	// may be written to tail, making it appear as if the buffer
	// don't reverse this or there may be problems if the RX interrupt
	// occurs after reading the value of head but before writing
	// the value to tail; the previous value of rx_buffer_head
	// may be written to tail, making it appear as if the buffer
	// were full, not empty.
	_rxBuffer->head = _rxBuffer->tail;

	// don't reverse this or there may be problems if the TX interrupt
	// occurs after reading the value of _txBuffer->tail but before writing
	// the value to _txBuffer->head.
	_txBuffer->tail = _txBuffer->head;
}

size_t AVRUARTDriver::write(uint8_t c) {
	uint16_t i;

	if (!_open) // drop bytes if not open
		return 0;

	// wait for room in the tx buffer
	i = (_txBuffer->head + 1) & _txBuffer->mask;

	// if the port is set into non-blocking mode, then drop the byte
	// if there isn't enough room for it in the transmit buffer
	if (_nonblocking_writes && i == _txBuffer->tail) {
		return 0;
	}

	while (i == _txBuffer->tail)
		;

	// add byte to the buffer
	_txBuffer->bytes[_txBuffer->head] = c;
	_txBuffer->head = i;

	// enable the data-ready interrupt, as it may be off if the buffer is empty
	*_ucsrb |= _portTxBits;

	// return number of bytes written (always 1)
	return 1;
}

// Buffer management ///////////////////////////////////////////////////////////
static inline unsigned int min (unsigned int a, unsigned int b)  {
    return (a>b)?b:a;
}

bool AVRUARTDriver::_allocBuffer(Buffer *buffer, unsigned int size)
{
	uint16_t	mask;
	uint8_t		shift;

	// init buffer state
	buffer->head = buffer->tail = 0;

	// Compute the power of 2 greater or equal to the requested buffer size
	// and then a mask to simplify wrapping operations.  Using __builtin_clz
	// would seem to make sense, but it uses a 256(!) byte table.
	// Note that we ignore requests for more than BUFFER_MAX space.
	for (shift = 1; (1U << shift) < min(_max_buffer_size, size); shift++)
		;
	mask = (1 << shift) - 1;

	// If the descriptor already has a buffer allocated we need to take
	// care of it.
	if (buffer->bytes) {

		// If the allocated buffer is already the correct size then
		// we have nothing to do
		if (buffer->mask == mask)
			return true;

		// Dispose of the old buffer.
		free(buffer->bytes);
	}
	buffer->mask = mask;

	// allocate memory for the buffer - if this fails, we fail.
	buffer->bytes = (uint8_t *) malloc(buffer->mask + 1);

	return (buffer->bytes != NULL);
}

void AVRUARTDriver::_freeBuffer(Buffer *buffer)
{
	buffer->head = buffer->tail = 0;
	buffer->mask = 0;
	if (NULL != buffer->bytes) {
		free(buffer->bytes);
		buffer->bytes = NULL;
	}
}

// BetterStream method implementations /////////////////////////////////////////
void AVRUARTDriver::print_P(const prog_char_t *s) {
        char    c;
        while ('\0' != (c = pgm_read_byte((const prog_char *)s++)))
                write(c);
}

void AVRUARTDriver::println_P(const prog_char_t *s) {
        print_P(s);
        println();
}

void AVRUARTDriver::printf(const char *fmt, ...) {
        va_list ap;
        va_start(ap, fmt);
        vprintf((AP_HAL::Print*)this, 0, fmt, ap);
        va_end(ap);
}

void AVRUARTDriver::_printf_P(const prog_char *fmt, ...) {
        va_list ap;
        va_start(ap, fmt);
        vprintf((AP_HAL::Print*)this, 1, fmt, ap);
        va_end(ap);
}