ardupilot/libraries/AP_HAL_ChibiOS/hwdef/BeastH7/hwdef-bl.dat

49 lines
997 B
Plaintext
Raw Normal View History

# hw definition file for processing by chibios_pins.py
# for iFlight Beast H7 hardware.
# MCU class and specific type
MCU STM32H7xx STM32H743xx
# board ID for firmware load
APJ_BOARD_ID 1025
# crystal frequency, setup to use external oscillator
OSCILLATOR_HZ 8000000
FLASH_SIZE_KB 2048
# bootloader starts at zero offset
FLASH_RESERVE_START_KB 0
# reserve space for flash storage in last 2 sectors
FLASH_RESERVE_END_KB 256
# the location where the bootloader will put the firmware
# the H743 has 128k sectors
FLASH_BOOTLOADER_LOAD_KB 128
# order of UARTs (and USB). Allow bootloading on USB and telem1
SERIAL_ORDER OTG1 USART1
# USART1
PA10 USART1_RX USART1
PA9 USART1_TX USART1
# USB
PA11 OTG_FS_DM OTG1
PA12 OTG_FS_DP OTG1
PA13 JTMS-SWDIO SWD
PA14 JTCK-SWCLK SWD
PC13 LED_BOOTLOADER OUTPUT LOW
define HAL_LED_ON 0
define HAL_USE_EMPTY_STORAGE 1
define HAL_STORAGE_SIZE 16384
# Add CS pins to ensure they are high in bootloader
PA4 MPU6000_CS CS
PA15 FLASH_CS CS
PE4 AT7456E_CS CS