ardupilot/libraries/AP_InertialNav/AP_InertialNav_NavEKF.cpp

/// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-

#include <AP_HAL/AP_HAL.h>
#include "AP_InertialNav.h"

#if AP_AHRS_NAVEKF_AVAILABLE

/*
  A wrapper around the AP_InertialNav class which uses the NavEKF
  filter if available, and falls back to the AP_InertialNav filter
  when EKF is not available
 */

/**
   update internal state
*/
void AP_InertialNav_NavEKF::update(float dt)
{
    // get the position relative to the local earth frame origin
    _ahrs_ekf.get_relative_position_NED(_relpos_cm);
    _relpos_cm *= 100; // convert to cm

    // get the absolute WGS-84 position
    _haveabspos = _ahrs_ekf.get_position(_abspos);

    // get the velocity relative to the local earth frame
    _ahrs_ekf.get_velocity_NED(_velocity_cm);
    _velocity_cm *= 100; // convert to cm/s

    // Get a derivative of the vertical position which is kinematically consistent with the vertical position is required by some control loops.
    // This is different to the vertical velocity from the EKF which is not always consistent with the verical position due to the various errors that are being corrected for.
    _ahrs_ekf.get_vert_pos_rate(_pos_z_rate);
    _pos_z_rate *= 100; // convert to cm/s

    // InertialNav is NEU
    _relpos_cm.z = - _relpos_cm.z;
    _velocity_cm.z = -_velocity_cm.z;
    _pos_z_rate = - _pos_z_rate;
}

/**
 * get_filter_status : returns filter status as a series of flags
 */
nav_filter_status AP_InertialNav_NavEKF::get_filter_status() const
{
    nav_filter_status status;
    _ahrs_ekf.get_filter_status(status);
    return status;
}

/**
 * get_origin - returns the inertial navigation origin in lat/lon/alt
 */
struct Location AP_InertialNav_NavEKF::get_origin() const
{
    struct Location ret;
     if (!_ahrs_ekf.get_origin(ret)) {
         // initialise location to all zeros if EKF1 origin not yet set
         memset(&ret, 0, sizeof(ret));
     }
    return ret;
}

/**
 * get_position - returns the current position relative to the home location in cm.
 *
 * @return
 */
const Vector3f &AP_InertialNav_NavEKF::get_position(void) const 
{
    return _relpos_cm;
}

/**
 * get_location - updates the provided location with the latest calculated location
 *  returns true on success (i.e. the EKF knows it's latest position), false on failure
 */
bool AP_InertialNav_NavEKF::get_location(struct Location &loc) const
{
    return _ahrs_ekf.get_location(loc);
}

/**
 * get_latitude - returns the latitude of the current position estimation in 100 nano degrees (i.e. degree value multiplied by 10,000,000)
 */
int32_t AP_InertialNav_NavEKF::get_latitude() const
{
    return _abspos.lat;
}

/**
 * get_longitude - returns the longitude of the current position estimation in 100 nano degrees (i.e. degree value multiplied by 10,000,000)
 * @return
 */
int32_t AP_InertialNav_NavEKF::get_longitude() const
{
    return _abspos.lng;
}

/**
 * get_velocity - returns the current velocity in cm/s
 *
 * @return velocity vector:
 *      		.x : latitude  velocity in cm/s
 * 				.y : longitude velocity in cm/s
 * 				.z : vertical  velocity in cm/s
 */
const Vector3f &AP_InertialNav_NavEKF::get_velocity() const
{
    return _velocity_cm;
}

/**
 * get_velocity_xy - returns the current horizontal velocity in cm/s
 *
 * @returns the current horizontal velocity in cm/s
 */
float AP_InertialNav_NavEKF::get_velocity_xy() const
{
    return pythagorous2(_velocity_cm.x, _velocity_cm.y);
}

/**
 * get_pos_z_derivative - returns the derivative of the z position in cm/s
*/
float AP_InertialNav_NavEKF::get_pos_z_derivative() const
{
    return _pos_z_rate;
}

/**
 * get_altitude - get latest altitude estimate in cm
 * @return
 */
float AP_InertialNav_NavEKF::get_altitude() const
{
    return _relpos_cm.z;
}

/**
 * getHgtAboveGnd - get latest height above ground level estimate in cm and a validity flag
 *
 * @return
 */
bool AP_InertialNav_NavEKF::get_hagl(float &height) const
{
    // true when estimate is valid
    bool valid = _ahrs_ekf.get_hagl(height);
    // convert height from m to cm
    height *= 100.0f;
    return valid;
}

/**
 * get_hgt_ctrl_limit - get maximum height to be observed by the control loops in cm and a validity flag
 * this is used to limit height during optical flow navigation
 * it will return invalid when no limiting is required
 * @return
 */
bool AP_InertialNav_NavEKF::get_hgt_ctrl_limit(float& limit) const
{
    // true when estimate is valid
    if (_ahrs_ekf.get_hgt_ctrl_limit(limit)) {
        // convert height from m to cm
        limit *= 100.0f;
        return true;
    }
    return false;
}

/**
 * get_velocity_z - returns the current climbrate.
 *
 * @see get_velocity().z
 *
 * @return climbrate in cm/s
 */
float AP_InertialNav_NavEKF::get_velocity_z() const
{
    return _velocity_cm.z;
}

#endif // AP_AHRS_NAVEKF_AVAILABLE