ardupilot/libraries/AP_HAL_FLYMAPLE/utility/EEPROM.h

100 lines
3.0 KiB
C
Raw Normal View History

#ifndef __EEPROM_H
#define __EEPROM_H
#define EEPROM_USES_16BIT_WORDS
#include "wirish.h"
#include "flash_stm32.h"
#ifndef EEPROM_PAGE_SIZE
#if defined (MCU_STM32F103RB) || defined (MCU_STM32F103CB)
#define EEPROM_PAGE_SIZE (uint16)0x400 /* Page size = 1KByte */
#elif defined (MCU_STM32F103ZE) || defined (MCU_STM32F103VE) || defined (MCU_STM32F103RE)
#define EEPROM_PAGE_SIZE (uint16)0x800 /* Page size = 2KByte */
#elif defined (MCU_STM32F205VE) || defined (MCU_STM32F406VG)
#define EEPROM_PAGE_SIZE (uint16)0x4000 /* Page size = 16KByte */
#else
#error "No MCU type specified. Add something like -DMCU_STM32F103RB " \
"to your compiler arguments (probably in a Makefile)."
#endif
#endif
#ifndef EEPROM_PAGE_SIZE
#endif
#ifndef EEPROM_START_ADDRESS
#if defined BOARD_freeflight
#define EEPROM_START_ADDRESS ((uint32)(0x8020000 - 2 * EEPROM_PAGE_SIZE))
#elif defined (MCU_STM32F103RB) || defined (MCU_STM32F103CB)
#define EEPROM_START_ADDRESS ((uint32)(0x8005000 - 2 * EEPROM_PAGE_SIZE))
#elif defined (MCU_STM32F103ZE) || defined (MCU_STM32F103VE) || defined (MCU_STM32F103RE)
//#define EEPROM_START_ADDRESS ((uint32)(0x8080000 - 2 * EEPROM_PAGE_SIZE))
#define EEPROM_START_ADDRESS ((uint32)(0x8005000 - 2 * EEPROM_PAGE_SIZE))
#elif defined (MCU_STM32F205VE) || defined (MCU_STM32F406VG)
#define EEPROM_START_ADDRESS ((uint32)(0x8010000 - 2 * EEPROM_PAGE_SIZE))
#else
#error "No MCU type specified. Add something like -DMCU_STM32F103RB " \
"to your compiler arguments (probably in a Makefile)."
#endif
#endif
/* Pages 0 and 1 base and end addresses */
#define EEPROM_PAGE0_BASE ((uint32)(EEPROM_START_ADDRESS))
#define EEPROM_PAGE1_BASE ((uint32)(EEPROM_START_ADDRESS + EEPROM_PAGE_SIZE))
/* Page status definitions */
#define EEPROM_ERASED ((uint16)0xFFFF) /* PAGE is empty */
#define EEPROM_RECEIVE_DATA ((uint16)0xEEEE) /* PAGE is marked to receive data */
#define EEPROM_VALID_PAGE ((uint16)0x0000) /* PAGE containing valid data */
/* Page full define */
enum //: uint16
{
EEPROM_OK = ((uint16)0x0000),
EEPROM_OUT_SIZE = ((uint16)0x0081),
EEPROM_BAD_ADDRESS = ((uint16)0x0082),
EEPROM_BAD_FLASH = ((uint16)0x0083),
EEPROM_NOT_INIT = ((uint16)0x0084),
EEPROM_NO_VALID_PAGE = ((uint16)0x00AB)
};
#define EEPROM_DEFAULT_DATA 0xFFFF
class EEPROMClass
{
public:
EEPROMClass(void);
uint16 init(void);
uint16 init(uint32, uint32, uint32);
uint16 format(void);
uint16 erases(uint16 *);
uint16 read (uint16 address);
uint16 read (uint16 address, uint16 *data);
uint16 write(uint16 address, uint16 data);
uint16 count(uint16 *);
uint16 maxcount(void);
uint32 PageBase0;
uint32 PageBase1;
uint32 PageSize;
uint16 Status;
private:
FLASH_Status EE_ErasePage(uint32);
uint16 EE_CheckPage(uint32, uint16);
uint16 EE_CheckErasePage(uint32, uint16);
uint16 EE_Format(void);
uint32 EE_FindValidPage(void);
uint16 EE_GetVariablesCount(uint32, uint16);
uint16 EE_PageTransfer(uint32, uint32, uint16);
uint16 EE_VerifyPageFullWriteVariable(uint16, uint16);
};
extern EEPROMClass EEPROM;
#endif /* __EEPROM_H */