ardupilot/libraries/AP_HAL_ChibiOS/hwdef/FlywooF405HD-AIOv2/hwdef-bl.dat


# hw definition file for processing by chibios_hwdef.py
# for FLYWOOF405HD_AIOv2 hardware.
# thanks to betaflight for pin information

include ../FlywooF405S-AIO/hwdef-bl.dat

#undefine items to be changed
undef APJ_BOARD_ID

# board ID for firmware load
APJ_BOARD_ID 1180

#required to prevent ELRS from changing modes at boot
PA10 USART1_RX USART1 OUTPUT HIGH
AP_HAL_ChibiOS: adds Flywoo/Goku F405 HD 1-2S ELRS AIO v2 flight controller support Co-authored-by: Henry Wurzburg <hwurzburg@yahoo.com> 2024-05-24 18:34:09 -03:00
			`# hw definition file for processing by chibios_hwdef.py`
			`# for FLYWOOF405HD_AIOv2 hardware.`
			`# thanks to betaflight for pin information`

			`include ../FlywooF405S-AIO/hwdef-bl.dat`

			`#undefine items to be changed`
			`undef APJ_BOARD_ID`

			`# board ID for firmware load`
			`APJ_BOARD_ID 1180`

			`#required to prevent ELRS from changing modes at boot`
AP_HAL_ChibiOS:correct pin to be pulled high during boot 2024-05-31 14:01:14 -03:00			`PA10 USART1_RX USART1 OUTPUT HIGH`