ardupilot/mk/PX4/ROMFS/init.d/rc.APM

#!nsh

# APM startup script for NuttX on PX4

# To disable APM startup add a /fs/microsd/APM/nostart file
# To enable mkblctrl startup add a /fs/microsd/APM/mkblctrl file
# To enable mavlink on ttys0 add a /fs/microsd/APM/mavlink-ttys0 file

set deviceA /dev/ttyACM0

# check for an old file called APM, caused by 
# a bug in an earlier firmware release
if [ -f /fs/microsd/APM ]
then
   echo "APM file found - renaming"
   mv /fs/microsd/APM /fs/microsd/APM.old
fi

if [ -f /fs/microsd/APM/nostart ]
then
   echo "APM/nostart found - skipping APM startup"
   sh /etc/init.d/rc.error
fi

# mount binfs so we can find the built-in apps
if [ -f /bin/reboot ]
then
	echo "binfs already mounted"
else
	echo "Mounting binfs"
        if mount -t binfs /dev/null /bin
        then
                echo "binfs mounted OK"
        else
                sh /etc/init.d/rc.error
        fi
fi

set sketch NONE
set logfile /fs/microsd/APM/boot.log

if [ ! -f /bin/ArduPilot ]
then
   echo "/bin/ardupilot not found"
   sh /etc/init.d/rc.error
fi

if mkdir /fs/microsd/APM > /dev/null
then
     echo "Created APM directory"
fi

uorb start
if mpu6000 start
then
     echo "Detected FMUv1 board"
     set BOARD FMUv1
else
     l3gd20 start
     echo "Detected FMUv2 board"
     set BOARD FMUv2
fi

if [ -f /fs/microsd/APM/mavlink-ttys0 ]
then
   set deviceC /dev/ttyS0
else
   if [ $BOARD == FMUv1 ]
   then
	set deviceC /dev/ttyS2
   else
	set deviceC /dev/ttyS1
   fi
fi

########################
# PX4IO upgrade handling
echo checking for /etc/px4io/px4io.bin
if [ -f /etc/px4io/px4io.bin ]
then
   echo "Checking for new px4io firmware"
   if cmp /etc/px4io/px4io.bin /fs/microsd/px4io.loaded
   then
      echo "No new px4io firmware"
   else
      echo Loading /etc/px4io/px4io.bin
      tone_alarm MBABGP
      if px4io update /etc/px4io/px4io.bin > /fs/microsd/APM/px4io_update.log
      then
      	cp /etc/px4io/px4io.bin /fs/microsd/px4io.loaded
      	echo Loaded /etc/px4io/px4io.bin OK >> /fs/microsd/APM/px4io_update.log
        tone_alarm MSPAA
      else
        echo Failed loading /etc/px4io/px4io.bin >> /fs/microsd/APM/px4io_update.log
        echo "check Safety Button" >> /fs/microsd/APM/px4io_update.log
	echo "Failed to upgrade PX4IO firmware"
        tone_alarm MNGGG
      fi
   fi
fi

echo "Starting APM sensors"
echo "Starting APM sensors" > $logfile
if ms5611 start
then
    echo "ms5611 started OK"
else
    sh /etc/init.d/rc.error
fi

if adc start
then
    echo "adc started OK"
else
    sh /etc/init.d/rc.error
fi

if [ $BOARD == FMUv1 ]
then
    echo "Starting FMUv1 sensors"
    if hmc5883 start
    then
        echo "hmc5883 started OK"
    else
        sh /etc/init.d/rc.error
    fi
else
    echo "Starting FMUv2 sensors"
    if hmc5883 start
    then
        echo "Using external magnetometer"
    fi
    if lsm303d start
    then
       echo "lsm303d started OK"
    else
       sh /etc/init.d/rc.error
    fi
fi

# why is this sleep needed?
sleep 1

# optional ETS airspeed sensor
if ets_airspeed start
then
    echo "Found ETS airspeed sensor" >> $logfile
fi

echo "Trying PX4IO board"
echo "Trying PX4IO board" >> $logfile
if px4io start
then
    echo "PX4IO board OK"
    echo "PX4IO board OK" >> $logfile
    echo "Setting FMU mode_pwm"
    fmu mode_pwm
    if [ $BOARD == FMUv1 -a $deviceC == /dev/ttyS1 ]
    then
	# ttyS1 is used for PWM output for 4 extra channels
	set deviceC /dev/ttyS2
    fi
    sleep 1
else
    echo "No PX4IO board found"
    echo "No PX4IO board found" >> $logfile

    if [ -f /fs/microsd/APM/mkblctrl ]
    then
   	echo "APM/mkblctrl found - switch to MK I2C ESCs"
   	echo "APM/mkblctrl found - switch to MK I2C ESCs" >> $logfile
	echo "Setting up mkblctrl driver"
	echo "Setting up mkblctrl driver" >> $logfile
	mkblctrl -mkmode x
    fi

    echo "Setting up PX4FMU direct mode"
    fmu mode_pwm
    if [ $BOARD == FMUv1 -a $deviceC == /dev/ttyS1 ]
    then
	# ttyS1 is used for PWM output when there
	# is no IO board
	set deviceC /dev/ttyS2
    fi
fi

echo Starting ArduPilot
echo Starting ArduPilot $deviceA $deviceC >> $logfile
if ArduPilot -d $deviceA -d2 $deviceC start
then
    echo ArduPilot started OK
else
    sh /etc/init.d/rc.error
fi
sleep 1

# if starting on the console, tell nsh to exit
# this prevents it from chewing bytes
if [ $deviceC == /dev/ttyS0 ]
then
	echo "Exiting from nsh shell"
	exit
fi

echo "rc.APM finished"
echo "rc.APM finished" >> $logfile
sleep 1