ardupilot/APMrover2/sensors.pde

// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-

static void init_sonar(void)
{
#if CONFIG_HAL_BOARD == HAL_BOARD_APM1
    sonar.Init(&adc);
    sonar2.Init(&adc);
#else
    sonar.Init(NULL);
    sonar2.Init(NULL);
#endif
}

/*
  read and update the battery
 */
static void read_battery(void)
{
	if(g.battery_monitoring == 0) {
		battery_voltage1 = 0;
		return;
	}
	
    if(g.battery_monitoring == 3 || g.battery_monitoring == 4) {
        // this copes with changing the pin at runtime
        batt_volt_pin->set_pin(g.battery_volt_pin);
        battery_voltage1 = BATTERY_VOLTAGE(batt_volt_pin);
    }

    if (g.battery_monitoring == 4) {
        static uint32_t last_time_ms;
        uint32_t tnow = hal.scheduler->millis();
        float dt = tnow - last_time_ms;
        if (last_time_ms != 0 && dt < 2000) {
            // this copes with changing the pin at runtime
            batt_curr_pin->set_pin(g.battery_curr_pin);
            current_amps1    = CURRENT_AMPS(batt_curr_pin);
            // .0002778 is 1/3600 (conversion to hours)
            current_total1   += current_amps1 * dt * 0.0002778f; 
        }
        last_time_ms = tnow;
    }
}


// read the receiver RSSI as an 8 bit number for MAVLink
// RC_CHANNELS_SCALED message
void read_receiver_rssi(void)
{
    rssi_analog_source->set_pin(g.rssi_pin);
    float ret = rssi_analog_source->voltage_average() * 50;
    receiver_rssi = constrain_int16(ret, 0, 255);
}

// read the sonars
static void read_sonars(void)
{
    if (!sonar.enabled()) {
        // this makes it possible to disable sonar at runtime
        return;
    }

    if (sonar2.enabled()) {
        // we have two sonars
        obstacle.sonar1_distance_cm = sonar.distance_cm();
        obstacle.sonar2_distance_cm = sonar2.distance_cm();
        if (obstacle.sonar1_distance_cm <= (uint16_t)g.sonar_trigger_cm &&
            obstacle.sonar2_distance_cm <= (uint16_t)obstacle.sonar2_distance_cm)  {
            // we have an object on the left
            if (obstacle.detected_count < 127) {
                obstacle.detected_count++;
            }
            if (obstacle.detected_count == g.sonar_debounce) {
                gcs_send_text_fmt(PSTR("Sonar1 obstacle %u cm"),
                                  (unsigned)obstacle.sonar1_distance_cm);
            }
            obstacle.detected_time_ms = hal.scheduler->millis();
            obstacle.turn_angle = g.sonar_turn_angle;
        } else if (obstacle.sonar2_distance_cm <= (uint16_t)g.sonar_trigger_cm) {
            // we have an object on the right
            if (obstacle.detected_count < 127) {
                obstacle.detected_count++;
            }
            if (obstacle.detected_count == g.sonar_debounce) {
                gcs_send_text_fmt(PSTR("Sonar2 obstacle %u cm"),
                                  (unsigned)obstacle.sonar2_distance_cm);
            }
            obstacle.detected_time_ms = hal.scheduler->millis();
            obstacle.turn_angle = -g.sonar_turn_angle;
        }
    } else {
        // we have a single sonar
        obstacle.sonar1_distance_cm = sonar.distance_cm();
        obstacle.sonar2_distance_cm = 0;
        if (obstacle.sonar1_distance_cm <= (uint16_t)g.sonar_trigger_cm)  {
            // obstacle detected in front 
            if (obstacle.detected_count < 127) {
                obstacle.detected_count++;
            }
            if (obstacle.detected_count == g.sonar_debounce) {
                gcs_send_text_fmt(PSTR("Sonar obstacle %u cm"),
                                  (unsigned)obstacle.sonar1_distance_cm);
            }
            obstacle.detected_time_ms = hal.scheduler->millis();
            obstacle.turn_angle = g.sonar_turn_angle;
        }
    }

    Log_Write_Sonar();

    // no object detected - reset after the turn time
    if (obstacle.detected_count >= g.sonar_debounce &&
        hal.scheduler->millis() > obstacle.detected_time_ms + g.sonar_turn_time*1000) { 
        gcs_send_text_fmt(PSTR("Obstacle passed"));
        obstacle.detected_count = 0;
        obstacle.turn_angle = 0;
    }
}