ardupilot/ArduCopter/mode_brake.cpp

82 lines
2.4 KiB
C++
Raw Normal View History

#include "Copter.h"
/*
* Init and run calls for brake flight mode
*/
2015-05-17 00:22:20 -03:00
// brake_init - initialise brake controller
bool Copter::ModeBrake::init(bool ignore_checks)
{
if (copter.position_ok() || ignore_checks) {
// set target to current position
wp_nav->init_brake_target(BRAKE_MODE_DECEL_RATE);
// initialize vertical speed and acceleration
pos_control->set_max_speed_z(BRAKE_MODE_SPEED_Z, BRAKE_MODE_SPEED_Z);
pos_control->set_max_accel_z(BRAKE_MODE_DECEL_RATE);
// initialise position and desired velocity
if (!pos_control->is_active_z()) {
pos_control->set_alt_target_to_current_alt();
pos_control->set_desired_velocity_z(inertial_nav.get_velocity_z());
}
_timeout_ms = 0;
2016-01-05 02:12:25 -04:00
return true;
}else{
return false;
}
}
2015-05-17 00:22:20 -03:00
// brake_run - runs the brake controller
// should be called at 100hz or more
void Copter::ModeBrake::run()
{
// if not auto armed set throttle to zero and exit immediately
if (!motors->armed() || !ap.auto_armed || !motors->get_interlock()) {
wp_nav->init_brake_target(BRAKE_MODE_DECEL_RATE);
zero_throttle_and_relax_ac();
pos_control->relax_alt_hold_controllers(0.0f);
return;
}
// relax stop target if we might be landed
2015-05-06 01:38:38 -03:00
if (ap.land_complete_maybe) {
loiter_nav->soften_for_landing();
2015-05-17 02:28:55 -03:00
}
// if landed immediately disarm
if (ap.land_complete) {
copter.init_disarm_motors();
}
2016-01-13 03:09:42 -04:00
// set motors to full range
motors->set_desired_spool_state(AP_Motors::DESIRED_THROTTLE_UNLIMITED);
2016-01-13 03:09:42 -04:00
2015-05-17 00:22:20 -03:00
// run brake controller
wp_nav->update_brake();
// call attitude controller
attitude_control->input_euler_angle_roll_pitch_euler_rate_yaw(wp_nav->get_roll(), wp_nav->get_pitch(), 0.0f);
// body-frame rate controller is run directly from 100hz loop
// update altitude target and call position controller
pos_control->set_alt_target_from_climb_rate_ff(0.0f, G_Dt, false);
pos_control->update_z_controller();
2016-01-05 02:12:25 -04:00
if (_timeout_ms != 0 && millis()-_timeout_start >= _timeout_ms) {
if (!copter.set_mode(LOITER, MODE_REASON_BRAKE_TIMEOUT)) {
copter.set_mode(ALT_HOLD, MODE_REASON_BRAKE_TIMEOUT);
2016-01-05 02:12:25 -04:00
}
}
}
void Copter::ModeBrake::timeout_to_loiter_ms(uint32_t timeout_ms)
2016-01-05 02:12:25 -04:00
{
_timeout_start = millis();
_timeout_ms = timeout_ms;
}