ardupilot/libraries/AP_Notify/RGBLed.cpp

403 lines
11 KiB
C++
Raw Normal View History

/*
Generic RGBLed driver
*/
/*
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
*/
#include <AP_HAL/AP_HAL.h>
#include <AP_GPS/AP_GPS.h>
2014-12-26 00:05:15 -04:00
#include "RGBLed.h"
#include "AP_Notify.h"
extern const AP_HAL::HAL& hal;
RGBLed::RGBLed(uint8_t led_off, uint8_t led_bright, uint8_t led_medium, uint8_t led_dim):
2015-02-02 17:14:35 -04:00
counter(0),
step(0),
_healthy(false),
_red_des(0),
_green_des(0),
_blue_des(0),
_red_curr(0),
_green_curr(0),
_blue_curr(0),
_led_off(led_off),
_led_bright(led_bright),
_led_medium(led_medium),
_led_dim(led_dim)
{
}
bool RGBLed::init()
{
_healthy = hw_init();
return _healthy;
}
// set_rgb - set color as a combination of red, green and blue values
void RGBLed::_set_rgb(uint8_t red, uint8_t green, uint8_t blue)
{
if (red != _red_curr ||
green != _green_curr ||
blue != _blue_curr) {
// call the hardware update routine
if (hw_set_rgb(red, green, blue)) {
_red_curr = red;
_green_curr = green;
_blue_curr = blue;
}
}
}
// set_rgb - set color as a combination of red, green and blue values
void RGBLed::set_rgb(uint8_t red, uint8_t green, uint8_t blue)
{
// return immediately if not enabled
if (!_healthy) {
return;
}
if (pNotify->_rgb_led_override) {
// don't set if in override mode
return;
}
_set_rgb(red, green, blue);
}
// _scheduled_update - updates _red, _green, _blue according to notify flags
void RGBLed::update_colours(void)
{
uint8_t brightness = _led_bright;
switch (pNotify->_rgb_led_brightness) {
case RGB_LED_OFF:
brightness = _led_off;
break;
case RGB_LED_LOW:
brightness = _led_dim;
break;
case RGB_LED_MEDIUM:
brightness = _led_medium;
break;
case RGB_LED_HIGH:
brightness = _led_bright;
break;
}
// slow rate from 50Hz to 10hz
counter++;
if (counter < 5) {
return;
}
// reset counter
counter = 0;
// move forward one step
step++;
if (step >= 10) {
step = 0;
}
// use dim light when connected through USB
if (hal.gpio->usb_connected() && brightness > _led_dim) {
brightness = _led_dim;
}
// initialising pattern
if (AP_Notify::flags.initialising) {
if (step & 1) {
// odd steps display red light
_red_des = brightness;
_blue_des = _led_off;
_green_des = _led_off;
} else {
// even display blue light
_red_des = _led_off;
_blue_des = brightness;
_green_des = _led_off;
}
// exit so no other status modify this pattern
return;
}
// save trim and esc calibration pattern
if (AP_Notify::flags.save_trim || AP_Notify::flags.esc_calibration) {
switch(step) {
case 0:
case 3:
case 6:
// red on
_red_des = brightness;
_blue_des = _led_off;
_green_des = _led_off;
break;
case 1:
case 4:
case 7:
// blue on
_red_des = _led_off;
_blue_des = brightness;
_green_des = _led_off;
break;
case 2:
case 5:
case 8:
// green on
_red_des = _led_off;
_blue_des = _led_off;
_green_des = brightness;
break;
case 9:
// all off
_red_des = _led_off;
_blue_des = _led_off;
_green_des = _led_off;
break;
}
// exit so no other status modify this pattern
return;
}
// radio and battery failsafe patter: flash yellow
// gps failsafe pattern : flashing yellow and blue
// ekf_bad pattern : flashing yellow and red
if (AP_Notify::flags.failsafe_radio || AP_Notify::flags.failsafe_battery ||
AP_Notify::flags.ekf_bad || AP_Notify::flags.leak_detected) {
switch(step) {
case 0:
case 1:
case 2:
case 3:
case 4:
// yellow on
_red_des = brightness;
_blue_des = _led_off;
_green_des = brightness;
break;
case 5:
case 6:
case 7:
case 8:
case 9:
if (AP_Notify::flags.leak_detected) {
// purple if leak detected
_red_des = brightness;
_blue_des = brightness;
_green_des = brightness;
} else if (AP_Notify::flags.ekf_bad) {
// red on if ekf bad
_red_des = brightness;
_blue_des = _led_off;
_green_des = _led_off;
}else{
// all off for radio or battery failsafe
_red_des = _led_off;
_blue_des = _led_off;
_green_des = _led_off;
}
break;
}
// exit so no other status modify this pattern
return;
}
// solid green or blue if armed
if (AP_Notify::flags.armed) {
// solid green if armed with GPS 3d lock
if (AP_Notify::flags.gps_status >= AP_GPS::GPS_OK_FIX_3D) {
_red_des = _led_off;
_blue_des = _led_off;
_green_des = brightness;
}else{
// solid blue if armed with no GPS lock
_red_des = _led_off;
_blue_des = brightness;
_green_des = _led_off;
}
return;
}else{
// double flash yellow if failing pre-arm checks
if (!AP_Notify::flags.pre_arm_check) {
switch(step) {
case 0:
case 1:
case 4:
case 5:
// yellow on
_red_des = brightness;
_blue_des = _led_off;
_green_des = brightness;
break;
case 2:
case 3:
case 6:
case 7:
case 8:
case 9:
// all off
_red_des = _led_off;
_blue_des = _led_off;
_green_des = _led_off;
break;
}
}else{
// fast flashing green if disarmed with GPS 3D lock and DGPS
// slow flashing green if disarmed with GPS 3d lock (and no DGPS)
// flashing blue if disarmed with no gps lock or gps pre_arm checks have failed
bool fast_green = AP_Notify::flags.gps_status >= AP_GPS::GPS_OK_FIX_3D_DGPS && AP_Notify::flags.pre_arm_gps_check;
switch(step) {
case 0:
if (fast_green) {
_green_des = brightness;
}
break;
case 1:
if (fast_green) {
_green_des = _led_off;
}
break;
case 2:
if (fast_green) {
_green_des = brightness;
}
break;
case 3:
if (fast_green) {
_green_des = _led_off;
}
break;
case 4:
_red_des = _led_off;
if (AP_Notify::flags.gps_status >= AP_GPS::GPS_OK_FIX_3D && AP_Notify::flags.pre_arm_gps_check) {
// flashing green if disarmed with GPS 3d lock
_blue_des = _led_off;
_green_des = brightness;
}else{
// flashing blue if disarmed with no gps lock
_blue_des = brightness;
_green_des = _led_off;
}
break;
case 5:
if (fast_green) {
_green_des = _led_off;
}
break;
case 6:
if (fast_green) {
_green_des = brightness;
}
break;
case 7:
if (fast_green) {
_green_des = _led_off;
}
break;
case 8:
if (fast_green) {
_green_des = brightness;
}
break;
case 9:
// all off
_red_des = _led_off;
_blue_des = _led_off;
_green_des = _led_off;
break;
}
}
}
}
// update - updates led according to timed_updated. Should be called
// at 50Hz
void RGBLed::update()
{
// return immediately if not enabled
if (!_healthy) {
return;
}
if (!pNotify->_rgb_led_override) {
update_colours();
set_rgb(_red_des, _green_des, _blue_des);
} else {
update_override();
}
}
/*
handle LED control, only used when LED_OVERRIDE=1
*/
void RGBLed::handle_led_control(mavlink_message_t *msg)
{
if (!pNotify->_rgb_led_override) {
// ignore LED_CONTROL commands if not in LED_OVERRIDE mode
return;
}
// decode mavlink message
mavlink_led_control_t packet;
mavlink_msg_led_control_decode(msg, &packet);
_led_override.start_ms = AP_HAL::millis();
switch (packet.custom_len) {
case 3:
_led_override.rate_hz = 0;
_led_override.r = packet.custom_bytes[0];
_led_override.g = packet.custom_bytes[1];
_led_override.b = packet.custom_bytes[2];
break;
case 4:
_led_override.rate_hz = packet.custom_bytes[3];
_led_override.r = packet.custom_bytes[0];
_led_override.g = packet.custom_bytes[1];
_led_override.b = packet.custom_bytes[2];
break;
default:
// not understood
break;
}
}
/*
update LED when in override mode
*/
void RGBLed::update_override(void)
{
if (_led_override.rate_hz == 0) {
// solid colour
_set_rgb(_led_override.r, _led_override.g, _led_override.b);
return;
}
// blinking
uint32_t ms_per_cycle = 1000 / _led_override.rate_hz;
uint32_t cycle = (AP_HAL::millis() - _led_override.start_ms) % ms_per_cycle;
if (cycle > ms_per_cycle / 2) {
// on
_set_rgb(_led_override.r, _led_override.g, _led_override.b);
} else {
_set_rgb(0, 0, 0);
}
}