ardupilot/ArduSub/flight_mode.cpp

/// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-

#include "Sub.h"

/*
 * flight.pde - high level calls to set and update flight modes
 *      logic for individual flight modes is in control_acro.pde, control_stabilize.pde, etc
 */

// set_mode - change flight mode and perform any necessary initialisation
// optional force parameter used to force the flight mode change (used only first time mode is set)
// returns true if mode was succesfully set
// ACRO, STABILIZE, ALTHOLD, LAND, DRIFT and SPORT can always be set successfully but the return state of other flight modes should be checked and the caller should deal with failures appropriately
bool Sub::set_mode(control_mode_t mode, mode_reason_t reason)
{
    // boolean to record if flight mode could be set
    bool success = false;
    bool ignore_checks = !motors.armed();   // allow switching to any mode if disarmed.  We rely on the arming check to perform

    // return immediately if we are already in the desired mode
    if (mode == control_mode) {
    	prev_control_mode = control_mode;
    	prev_control_mode_reason = control_mode_reason;

    	control_mode_reason = reason;
        return true;
    }

    switch(mode) {
        case ACRO:
            success = acro_init(ignore_checks);
            break;

        case STABILIZE:
            success = stabilize_init(ignore_checks);
            break;

        case ALT_HOLD:
            success = althold_init(ignore_checks);
            break;

        case AUTO:
            success = auto_init(ignore_checks);
            break;

        case CIRCLE:
            success = circle_init(ignore_checks);
            break;

        case VELHOLD:
            success = velhold_init(ignore_checks);
            break;

        case GUIDED:
            success = guided_init(ignore_checks);
            break;

        case SURFACE:
            success = surface_init(ignore_checks);
            break;

        case RTL:
            success = rtl_init(ignore_checks);
            break;

        case DRIFT:
            success = drift_init(ignore_checks);
            break;

#if TRANSECT_ENABLED == ENABLED
        case TRANSECT:
            success = transect_init(ignore_checks);
            break;
#endif

        case FLIP:
            success = flip_init(ignore_checks);
            break;

#if AUTOTUNE_ENABLED == ENABLED
        case AUTOTUNE:
            success = autotune_init(ignore_checks);
            break;
#endif

#if POSHOLD_ENABLED == ENABLED
        case POSHOLD:
            success = poshold_init(ignore_checks);
            break;
#endif

        case BRAKE:
            success = brake_init(ignore_checks);
            break;

        case THROW:
        	success = throw_init(ignore_checks);
        	break;

        case MANUAL:
        	success = manual_init(ignore_checks);
        	break;

        default:
            success = false;
            break;
    }

    // update flight mode
    if (success) {
        // perform any cleanup required by previous flight mode
        exit_mode(control_mode, mode);

        prev_control_mode = control_mode;
        prev_control_mode_reason = control_mode_reason;

        control_mode = mode;
        control_mode_reason = reason;
        DataFlash.Log_Write_Mode(control_mode, control_mode_reason);

#if AC_FENCE == ENABLED
        // pilot requested flight mode change during a fence breach indicates pilot is attempting to manually recover
        // this flight mode change could be automatic (i.e. fence, battery, GPS or GCS failsafe)
        // but it should be harmless to disable the fence temporarily in these situations as well
        fence.manual_recovery_start();
#endif
    }else{
        // Log error that we failed to enter desired flight mode
        Log_Write_Error(ERROR_SUBSYSTEM_FLIGHT_MODE,mode);
    }

    // update notify object
    if (success) {
        notify_flight_mode(control_mode);
    }

    // return success or failure
    return success;
}

// update_flight_mode - calls the appropriate attitude controllers based on flight mode
// called at 100hz or more
void Sub::update_flight_mode()
{
    // Update EKF speed limit - used to limit speed when we are using optical flow
    ahrs.getEkfControlLimits(ekfGndSpdLimit, ekfNavVelGainScaler);

    switch (control_mode) {
        case ACRO:
            acro_run();
            break;

        case STABILIZE:
            stabilize_run();
            break;

        case ALT_HOLD:
            althold_run();
            break;

        case AUTO:
            auto_run();
            break;

        case CIRCLE:
            circle_run();
            break;

        case VELHOLD:
            velhold_run();
            break;

        case GUIDED:
            guided_run();
            break;

        case SURFACE:
            surface_run();
            break;

        case RTL:
            rtl_run();
            break;

        case DRIFT:
            drift_run();
            break;

#if TRANSECT_ENABLED == ENABLED
        case TRANSECT:
            transect_run();
            break;
#endif

        case FLIP:
            flip_run();
            break;

#if AUTOTUNE_ENABLED == ENABLED
        case AUTOTUNE:
            autotune_run();
            break;
#endif

#if POSHOLD_ENABLED == ENABLED
        case POSHOLD:
            poshold_run();
            break;
#endif

        case BRAKE:
            brake_run();
            break;

        case THROW:
        	throw_run();
        	break;

        case MANUAL:
        	manual_run();
        	break;

        default:
        	break;
    }
}

// exit_mode - high level call to organise cleanup as a flight mode is exited
void Sub::exit_mode(control_mode_t old_control_mode, control_mode_t new_control_mode)
{
#if AUTOTUNE_ENABLED == ENABLED
    if (old_control_mode == AUTOTUNE) {
        autotune_stop();
    }
#endif

    // stop mission when we leave auto mode
    if (old_control_mode == AUTO) {
        if (mission.state() == AP_Mission::MISSION_RUNNING) {
            mission.stop();
        }
#if MOUNT == ENABLED
        camera_mount.set_mode_to_default();
#endif  // MOUNT == ENABLED
    }

    if (old_control_mode == THROW) {
    	throw_exit();
    }

    // smooth throttle transition when switching from manual to automatic flight modes
    if (mode_has_manual_throttle(old_control_mode) && !mode_has_manual_throttle(new_control_mode) && motors.armed() && !ap.land_complete) {
        // this assumes all manual flight modes use get_pilot_desired_throttle to translate pilot input to output throttle
        set_accel_throttle_I_from_pilot_throttle(get_pilot_desired_throttle(channel_throttle->control_in));
    }

    // cancel any takeoffs in progress
    takeoff_stop();
}

// returns true or false whether mode requires GPS
bool Sub::mode_requires_GPS(control_mode_t mode) {
    switch(mode) {
        case AUTO:
        case GUIDED:
        case VELHOLD:
        case RTL:
        case CIRCLE:
        case DRIFT:
        case POSHOLD:
        case BRAKE:
        case THROW:
        case TRANSECT:
            return true;
        default:
            return false;
    }

    return false;
}

// mode_has_manual_throttle - returns true if the flight mode has a manual throttle (i.e. pilot directly controls throttle)
bool Sub::mode_has_manual_throttle(control_mode_t mode) {
    switch(mode) {
        case ACRO:
        case STABILIZE:
        case MANUAL:
            return true;
        default:
            return false;
    }

    return false;
}

// mode_allows_arming - returns true if vehicle can be armed in the specified mode
//  arming_from_gcs should be set to true if the arming request comes from the ground station
bool Sub::mode_allows_arming(control_mode_t mode, bool arming_from_gcs) {
	if (mode_has_manual_throttle(mode) || mode == VELHOLD || mode == ALT_HOLD || mode == POSHOLD || mode == DRIFT || mode == TRANSECT || mode == THROW || (arming_from_gcs && mode == GUIDED)) {
        return true;
    }
    return false;
}

// notify_flight_mode - sets notify object based on flight mode.  Only used for OreoLED notify device
void Sub::notify_flight_mode(control_mode_t mode) {
    switch(mode) {
        case AUTO:
        case GUIDED:
        case RTL:
        case CIRCLE:
        case SURFACE:
            // autopilot modes
            AP_Notify::flags.autopilot_mode = true;
            break;
        default:
            // all other are manual flight modes
            AP_Notify::flags.autopilot_mode = false;
            break;
    }
}

//
// print_flight_mode - prints flight mode to serial port.
//
void Sub::print_flight_mode(AP_HAL::BetterStream *port, uint8_t mode)
{
    switch (mode) {
    case STABILIZE:
        port->print("STABILIZE");
        break;
    case ACRO:
        port->print("ACRO");
        break;
    case ALT_HOLD:
        port->print("ALT_HOLD");
        break;
    case AUTO:
        port->print("AUTO");
        break;
    case GUIDED:
        port->print("GUIDED");
        break;
    case VELHOLD:
        port->print("VELHOLD");
        break;
    case RTL:
        port->print("RTL");
        break;
    case CIRCLE:
        port->print("CIRCLE");
        break;
    case SURFACE:
        port->print("SURFACE");
        break;
    case OF_LOITER:
        port->print("OF_LOITER");
        break;
    case DRIFT:
        port->print("DRIFT");
        break;
    case TRANSECT:
        port->print("TRANSECT");
        break;
    case FLIP:
        port->print("FLIP");
        break;
    case AUTOTUNE:
        port->print("AUTOTUNE");
        break;
    case POSHOLD:
        port->print("POSHOLD");
        break;
    case BRAKE:
        port->print("BRAKE");
        break;
    case THROW:
        port->print("THROW");
        break;
    case MANUAL:
    	port->print("MANUAL");
    	break;
    default:
        port->printf("Mode(%u)", (unsigned)mode);
        break;
    }
}