ardupilot/APMrover2/test.pde

589 lines
15 KiB
Plaintext
Raw Normal View History

// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
#if CLI_ENABLED == ENABLED
// These are function definitions so the Menu can be constructed before the functions
// are defined below. Order matters to the compiler.
static int8_t test_radio_pwm(uint8_t argc, const Menu::arg *argv);
static int8_t test_radio(uint8_t argc, const Menu::arg *argv);
static int8_t test_passthru(uint8_t argc, const Menu::arg *argv);
static int8_t test_failsafe(uint8_t argc, const Menu::arg *argv);
static int8_t test_gps(uint8_t argc, const Menu::arg *argv);
#if CONFIG_ADC == ENABLED
static int8_t test_adc(uint8_t argc, const Menu::arg *argv);
#endif
static int8_t test_ins(uint8_t argc, const Menu::arg *argv);
static int8_t test_battery(uint8_t argc, const Menu::arg *argv);
static int8_t test_relay(uint8_t argc, const Menu::arg *argv);
static int8_t test_wp(uint8_t argc, const Menu::arg *argv);
#if CONFIG_SONAR == ENABLED
static int8_t test_sonar(uint8_t argc, const Menu::arg *argv);
#endif
static int8_t test_mag(uint8_t argc, const Menu::arg *argv);
static int8_t test_modeswitch(uint8_t argc, const Menu::arg *argv);
static int8_t test_logging(uint8_t argc, const Menu::arg *argv);
// Creates a constant array of structs representing menu options
// and stores them in Flash memory, not RAM.
// User enters the string in the console to call the functions on the right.
// See class Menu in AP_Common for implementation details
static const struct Menu::command test_menu_commands[] PROGMEM = {
{"pwm", test_radio_pwm},
{"radio", test_radio},
{"passthru", test_passthru},
{"failsafe", test_failsafe},
{"battery", test_battery},
{"relay", test_relay},
{"waypoints", test_wp},
{"modeswitch", test_modeswitch},
// Tests below here are for hardware sensors only present
// when real sensors are attached or they are emulated
#if HIL_MODE == HIL_MODE_DISABLED
#if CONFIG_ADC == ENABLED
{"adc", test_adc},
#endif
{"gps", test_gps},
{"ins", test_ins},
#if CONFIG_SONAR == ENABLED
{"sonartest", test_sonar},
#endif
{"compass", test_mag},
#elif HIL_MODE == HIL_MODE_SENSORS
{"adc", test_adc},
{"gps", test_gps},
{"ins", test_ins},
{"compass", test_mag},
#elif HIL_MODE == HIL_MODE_ATTITUDE
#endif
{"logging", test_logging},
};
// A Macro to create the Menu
MENU(test_menu, "test", test_menu_commands);
static int8_t
test_mode(uint8_t argc, const Menu::arg *argv)
{
cliSerial->printf_P(PSTR("Test Mode\n\n"));
test_menu.run();
return 0;
}
static void print_hit_enter()
{
cliSerial->printf_P(PSTR("Hit Enter to exit.\n\n"));
}
static int8_t
test_radio_pwm(uint8_t argc, const Menu::arg *argv)
{
print_hit_enter();
delay(1000);
while(1){
delay(20);
// Filters radio input - adjust filters in the radio.pde file
// ----------------------------------------------------------
read_radio();
cliSerial->printf_P(PSTR("IN:\t1: %d\t2: %d\t3: %d\t4: %d\t5: %d\t6: %d\t7: %d\t8: %d\n"),
g.channel_roll.radio_in,
g.channel_pitch.radio_in,
g.channel_throttle.radio_in,
g.channel_rudder.radio_in,
g.rc_5.radio_in,
g.rc_6.radio_in,
g.rc_7.radio_in,
g.rc_8.radio_in);
if(cliSerial->available() > 0){
return (0);
}
}
}
static int8_t
test_passthru(uint8_t argc, const Menu::arg *argv)
{
print_hit_enter();
delay(1000);
while(1){
delay(20);
// New radio frame? (we could use also if((millis()- timer) > 20)
if (hal.rcin->valid() > 0) {
cliSerial->print("CH:");
for(int i = 0; i < 8; i++){
2012-12-18 17:00:32 -04:00
cliSerial->print(hal.rcin->read(i)); // Print channel values
cliSerial->print(",");
2012-12-18 17:00:32 -04:00
hal.rcout->write(i, hal.rcin->read(i)); // Copy input to Servos
}
cliSerial->println();
}
if (cliSerial->available() > 0){
return (0);
}
}
return 0;
}
static int8_t
test_radio(uint8_t argc, const Menu::arg *argv)
{
print_hit_enter();
delay(1000);
// read the radio to set trims
// ---------------------------
trim_radio();
while(1){
delay(20);
read_radio();
g.channel_roll.calc_pwm();
g.channel_pitch.calc_pwm();
g.channel_throttle.calc_pwm();
g.channel_rudder.calc_pwm();
// write out the servo PWM values
// ------------------------------
set_servos();
tuning_value = constrain(((float)(g.rc_7.radio_in - g.rc_7.radio_min) / (float)(g.rc_7.radio_max - g.rc_7.radio_min)),0,1);
cliSerial->printf_P(PSTR("IN 1: %d\t2: %d\t3: %d\t4: %d\t5: %d\t6: %d\t7: %d\t8: %d Tuning = %2.3f\n"),
g.channel_roll.control_in,
g.channel_pitch.control_in,
g.channel_throttle.control_in,
g.channel_rudder.control_in,
g.rc_5.control_in,
g.rc_6.control_in,
g.rc_7.control_in,
g.rc_8.control_in,
tuning_value);
if(cliSerial->available() > 0){
return (0);
}
}
}
static int8_t
test_failsafe(uint8_t argc, const Menu::arg *argv)
{
uint8_t fail_test;
print_hit_enter();
for(int i = 0; i < 50; i++){
delay(20);
read_radio();
}
// read the radio to set trims
// ---------------------------
trim_radio();
oldSwitchPosition = readSwitch();
cliSerial->printf_P(PSTR("Unplug battery, throttle in neutral, turn off radio.\n"));
while(g.channel_throttle.control_in > 0){
delay(20);
read_radio();
}
while(1){
delay(20);
read_radio();
if(g.channel_throttle.control_in > 0){
cliSerial->printf_P(PSTR("THROTTLE CHANGED %d \n"), g.channel_throttle.control_in);
fail_test++;
}
if (oldSwitchPosition != readSwitch()){
cliSerial->printf_P(PSTR("CONTROL MODE CHANGED: "));
print_flight_mode(readSwitch());
fail_test++;
}
if(g.throttle_fs_enabled && g.channel_throttle.get_failsafe()){
cliSerial->printf_P(PSTR("THROTTLE FAILSAFE ACTIVATED: %d, "), g.channel_throttle.radio_in);
print_flight_mode(readSwitch());
fail_test++;
}
if(fail_test > 0){
return (0);
}
if(cliSerial->available() > 0){
cliSerial->printf_P(PSTR("LOS caused no change in APM.\n"));
return (0);
}
}
}
static int8_t
test_battery(uint8_t argc, const Menu::arg *argv)
{
if (g.battery_monitoring == 3 || g.battery_monitoring == 4) {
print_hit_enter();
delta_ms_medium_loop = 100;
while(1){
delay(100);
read_radio();
read_battery();
if (g.battery_monitoring == 3){
cliSerial->printf_P(PSTR("V: %4.4f\n"),
battery_voltage1,
current_amps1,
current_total1);
} else {
cliSerial->printf_P(PSTR("V: %4.4f, A: %4.4f, mAh: %4.4f\n"),
battery_voltage1,
current_amps1,
current_total1);
}
// write out the servo PWM values
// ------------------------------
set_servos();
if(cliSerial->available() > 0){
return (0);
}
}
} else {
cliSerial->printf_P(PSTR("Not enabled\n"));
return (0);
}
}
static int8_t
test_relay(uint8_t argc, const Menu::arg *argv)
{
print_hit_enter();
delay(1000);
while(1){
cliSerial->printf_P(PSTR("Relay on\n"));
relay.on();
delay(3000);
if(cliSerial->available() > 0){
return (0);
}
cliSerial->printf_P(PSTR("Relay off\n"));
relay.off();
delay(3000);
if(cliSerial->available() > 0){
return (0);
}
}
}
static int8_t
test_wp(uint8_t argc, const Menu::arg *argv)
{
delay(1000);
cliSerial->printf_P(PSTR("%d waypoints\n"), (int)g.command_total);
cliSerial->printf_P(PSTR("Hit radius: %d\n"), (int)g.waypoint_radius);
for(uint8_t i = 0; i <= g.command_total; i++){
struct Location temp = get_cmd_with_index(i);
test_wp_print(&temp, i);
}
return (0);
}
static void
test_wp_print(struct Location *cmd, uint8_t wp_index)
{
cliSerial->printf_P(PSTR("command #: %d id:%d options:%d p1:%d p2:%ld p3:%ld p4:%ld \n"),
(int)wp_index,
(int)cmd->id,
(int)cmd->options,
(int)cmd->p1,
cmd->alt,
cmd->lat,
cmd->lng);
}
static int8_t
test_modeswitch(uint8_t argc, const Menu::arg *argv)
{
print_hit_enter();
delay(1000);
cliSerial->printf_P(PSTR("Control CH "));
cliSerial->println(FLIGHT_MODE_CHANNEL, DEC);
while(1){
delay(20);
uint8_t switchPosition = readSwitch();
if (oldSwitchPosition != switchPosition){
cliSerial->printf_P(PSTR("Position %d\n"), switchPosition);
oldSwitchPosition = switchPosition;
}
if(cliSerial->available() > 0){
return (0);
}
}
}
/*
test the dataflash is working
*/
static int8_t
test_logging(uint8_t argc, const Menu::arg *argv)
{
cliSerial->println_P(PSTR("Testing dataflash logging"));
if (!DataFlash.CardInserted()) {
cliSerial->println_P(PSTR("ERR: No dataflash inserted"));
return 0;
}
DataFlash.ReadManufacturerID();
cliSerial->printf_P(PSTR("Manufacturer: 0x%02x Device: 0x%04x\n"),
(unsigned)DataFlash.df_manufacturer,
(unsigned)DataFlash.df_device);
cliSerial->printf_P(PSTR("NumPages: %u PageSize: %u\n"),
(unsigned)DataFlash.df_NumPages+1,
(unsigned)DataFlash.df_PageSize);
DataFlash.StartRead(DataFlash.df_NumPages+1);
cliSerial->printf_P(PSTR("Format version: %lx Expected format version: %lx\n"),
(unsigned long)DataFlash.ReadLong(), (unsigned long)DF_LOGGING_FORMAT);
return 0;
}
//-------------------------------------------------------------------------------------------
// tests in this section are for real sensors or sensors that have been simulated
#if HIL_MODE == HIL_MODE_DISABLED || HIL_MODE == HIL_MODE_SENSORS
#if CONFIG_ADC == ENABLED
static int8_t
test_adc(uint8_t argc, const Menu::arg *argv)
{
print_hit_enter();
adc.Init();
delay(1000);
cliSerial->printf_P(PSTR("ADC\n"));
delay(1000);
while(1){
for (int i=0;i<9;i++) cliSerial->printf_P(PSTR("%.1f\t"),adc.Ch(i));
cliSerial->println();
delay(100);
if(cliSerial->available() > 0){
return (0);
}
}
}
#endif // CONFIG_ADC
static int8_t
test_gps(uint8_t argc, const Menu::arg *argv)
{
print_hit_enter();
delay(1000);
while(1){
delay(333);
// Blink GPS LED if we don't have a fix
// ------------------------------------
update_GPS_light();
g_gps->update();
if (g_gps->new_data){
cliSerial->printf_P(PSTR("Lat: %ld, Lon %ld, Alt: %ldm, #sats: %d\n"),
g_gps->latitude,
g_gps->longitude,
g_gps->altitude/100,
g_gps->num_sats);
}else{
cliSerial->printf_P(PSTR("."));
}
if(cliSerial->available() > 0){
return (0);
}
}
}
static int8_t
test_ins(uint8_t argc, const Menu::arg *argv)
{
//cliSerial->printf_P(PSTR("Calibrating."));
2013-01-13 01:03:54 -04:00
ahrs.init();
ahrs.set_fly_forward(true);
2012-11-29 07:57:10 -04:00
ins.init(AP_InertialSensor::COLD_START,
ins_sample_rate,
flash_leds);
ahrs.reset();
print_hit_enter();
delay(1000);
while(1){
delay(20);
if (millis() - fast_loopTimer > 19) {
delta_ms_fast_loop = millis() - fast_loopTimer;
G_Dt = (float)delta_ms_fast_loop / 1000.f; // used by DCM integrator
fast_loopTimer = millis();
// INS
// ---
ahrs.update();
if(g.compass_enabled) {
medium_loopCounter++;
if(medium_loopCounter == 5){
compass.read();
medium_loopCounter = 0;
}
}
// We are using the IMU
// ---------------------
Vector3f gyros = ins.get_gyro();
Vector3f accels = ins.get_accel();
cliSerial->printf_P(PSTR("r:%4d p:%4d y:%3d g=(%5.1f %5.1f %5.1f) a=(%5.1f %5.1f %5.1f)\n"),
(int)ahrs.roll_sensor / 100,
(int)ahrs.pitch_sensor / 100,
(uint16_t)ahrs.yaw_sensor / 100,
gyros.x, gyros.y, gyros.z,
accels.x, accels.y, accels.z);
}
if(cliSerial->available() > 0){
return (0);
}
}
}
static int8_t
test_mag(uint8_t argc, const Menu::arg *argv)
{
if (!g.compass_enabled) {
cliSerial->printf_P(PSTR("Compass: "));
print_enabled(false);
return (0);
}
compass.set_orientation(MAG_ORIENTATION);
if (!compass.init()) {
cliSerial->println_P(PSTR("Compass initialisation failed!"));
return 0;
}
2013-01-13 01:03:54 -04:00
ahrs.init();
ahrs.set_fly_forward(true);
ahrs.set_compass(&compass);
report_compass();
// we need the AHRS initialised for this test
2012-11-29 07:57:10 -04:00
ins.init(AP_InertialSensor::COLD_START,
ins_sample_rate,
flash_leds);
ahrs.reset();
int counter = 0;
float heading = 0;
//cliSerial->printf_P(PSTR("MAG_ORIENTATION: %d\n"), MAG_ORIENTATION);
print_hit_enter();
while(1) {
delay(20);
if (millis() - fast_loopTimer > 19) {
delta_ms_fast_loop = millis() - fast_loopTimer;
G_Dt = (float)delta_ms_fast_loop / 1000.f; // used by DCM integrator
fast_loopTimer = millis();
// IMU
// ---
ahrs.update();
medium_loopCounter++;
if(medium_loopCounter == 5){
if (compass.read()) {
// Calculate heading
Matrix3f m = ahrs.get_dcm_matrix();
heading = compass.calculate_heading(m);
compass.null_offsets();
}
medium_loopCounter = 0;
}
counter++;
if (counter>20) {
if (compass.healthy) {
Vector3f maggy = compass.get_offsets();
cliSerial->printf_P(PSTR("Heading: %ld, XYZ: %d, %d, %d,\tXYZoff: %6.2f, %6.2f, %6.2f\n"),
(wrap_360(ToDeg(heading) * 100)) /100,
(int)compass.mag_x,
(int)compass.mag_y,
(int)compass.mag_z,
maggy.x,
maggy.y,
maggy.z);
} else {
cliSerial->println_P(PSTR("compass not healthy"));
}
counter=0;
}
}
if (cliSerial->available() > 0) {
break;
}
}
// save offsets. This allows you to get sane offset values using
// the CLI before you go flying.
cliSerial->println_P(PSTR("saving offsets"));
compass.save_offsets();
return (0);
}
#endif // HIL_MODE == HIL_MODE_DISABLED || HIL_MODE == HIL_MODE_SENSORS
//-------------------------------------------------------------------------------------------
// real sensors that have not been simulated yet go here
#if CONFIG_SONAR == ENABLED
static int8_t
test_sonar(uint8_t argc, const Menu::arg *argv)
{
print_hit_enter();
delay(1000);
init_sonar();
delay(1000);
while(1){
delay(20);
if(g.sonar_enabled){
sonar_dist = sonar->read();
}
cliSerial->printf_P(PSTR("sonar_dist = %d\n"), (int)sonar_dist);
if(cliSerial->available() > 0){
break;
}
}
return (0);
}
#endif // SONAR == ENABLED
#endif // CLI_ENABLED