ardupilot/libraries/AP_HAL_ChibiOS/hwdef/f103-ADSB/hwdef.dat

include ../f103-periph/hwdef.inc

#STDOUT_SERIAL SD1
#STDOUT_BAUDRATE 115200

define HAL_AIRSPEED_BUS_DEFAULT 0
define AIRSPEED_MAX_SENSORS 1

# ADSB enable
define HAL_PERIPH_ADSB_PORT_DEFAULT 3
define HAL_PERIPH_ENABLE_ADSB
define HAL_PERIPH_ENABLE_AIRSPEED
# define HAL_PERIPH_ENABLE_MAG
AP_HAL_ChibiOS: rename f103-periph/hwdef.dat to .inc (f303 too) 2021-05-19 23:17:46 -03:00			`include ../f103-periph/hwdef.inc`
HAL_ChibiOS: added a f103-ADSB firmware for presenting a ping ADSB device as UAVCAN 2019-10-02 05:47:42 -03:00
			`#STDOUT_SERIAL SD1`
			`#STDOUT_BAUDRATE 115200`

HAL_ChibiOS: enable airspeed in f103-ADSB 2019-10-03 08:02:28 -03:00			`define HAL_AIRSPEED_BUS_DEFAULT 0`
			`define AIRSPEED_MAX_SENSORS 1`

HAL_ChibiOS: added a f103-ADSB firmware for presenting a ping ADSB device as UAVCAN 2019-10-02 05:47:42 -03:00			`# ADSB enable`
AP_HAL_ChibiOS: change ADSB to use param ADSB_PORT instead of define 2020-12-18 01:41:10 -04:00			`define HAL_PERIPH_ADSB_PORT_DEFAULT 3`
HAL_ChibiOS: added a f103-ADSB firmware for presenting a ping ADSB device as UAVCAN 2019-10-02 05:47:42 -03:00			`define HAL_PERIPH_ENABLE_ADSB`
HAL_ChibiOS: enable airspeed in f103-ADSB 2019-10-03 08:02:28 -03:00			`define HAL_PERIPH_ENABLE_AIRSPEED`
			`# define HAL_PERIPH_ENABLE_MAG`