2013-09-28 05:40:29 -03:00
|
|
|
/*
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
|
|
it under the terms of the GNU General Public License as published by
|
|
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
|
|
(at your option) any later version.
|
|
|
|
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
GNU General Public License for more details.
|
|
|
|
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
backend driver for airspeed from a I2C MS4525D0 sensor
|
|
|
|
*/
|
2016-11-30 00:59:20 -04:00
|
|
|
#include "AP_Airspeed_MS4525.h"
|
2013-09-28 05:40:29 -03:00
|
|
|
|
2015-08-11 03:28:42 -03:00
|
|
|
#include <AP_Common/AP_Common.h>
|
|
|
|
#include <AP_HAL/AP_HAL.h>
|
2016-06-08 09:13:53 -03:00
|
|
|
#include <AP_HAL/I2CDevice.h>
|
2015-08-11 03:28:42 -03:00
|
|
|
#include <AP_Math/AP_Math.h>
|
2016-06-08 09:13:53 -03:00
|
|
|
#include <stdio.h>
|
|
|
|
#include <utility>
|
2013-09-28 05:40:29 -03:00
|
|
|
|
2016-01-29 07:38:33 -04:00
|
|
|
extern const AP_HAL::HAL &hal;
|
2013-09-28 05:40:29 -03:00
|
|
|
|
2016-07-12 02:56:25 -03:00
|
|
|
#define MS4525D0_I2C_ADDR 0x28
|
2013-09-28 05:40:29 -03:00
|
|
|
|
2016-06-08 09:13:53 -03:00
|
|
|
#ifdef HAL_AIRSPEED_MS4515DO_I2C_BUS
|
|
|
|
#define MS4525D0_I2C_BUS HAL_AIRSPEED_MS4515DO_I2C_BUS
|
|
|
|
#else
|
|
|
|
#define MS4525D0_I2C_BUS 1
|
|
|
|
#endif
|
|
|
|
|
2016-11-30 00:59:20 -04:00
|
|
|
AP_Airspeed_MS4525::AP_Airspeed_MS4525(AP_Airspeed &_frontend) :
|
2016-11-30 00:49:19 -04:00
|
|
|
AP_Airspeed_Backend(_frontend)
|
2016-06-08 21:10:54 -03:00
|
|
|
{
|
|
|
|
}
|
|
|
|
|
2013-09-28 05:40:29 -03:00
|
|
|
// probe and initialise the sensor
|
2016-11-30 00:59:20 -04:00
|
|
|
bool AP_Airspeed_MS4525::init()
|
2013-09-28 05:40:29 -03:00
|
|
|
{
|
2016-11-30 02:21:48 -04:00
|
|
|
const struct {
|
|
|
|
uint8_t bus;
|
|
|
|
uint8_t addr;
|
|
|
|
} addresses[] = {
|
|
|
|
{ 1, MS4525D0_I2C_ADDR },
|
|
|
|
{ 0, MS4525D0_I2C_ADDR },
|
|
|
|
};
|
|
|
|
bool found = false;
|
|
|
|
for (uint8_t i=0; i<ARRAY_SIZE(addresses); i++) {
|
|
|
|
_dev = hal.i2c_mgr->get_device(addresses[i].bus, addresses[i].addr);
|
|
|
|
if (!_dev) {
|
|
|
|
continue;
|
|
|
|
}
|
2017-02-18 00:26:58 -04:00
|
|
|
if (!_dev->get_semaphore()->take(HAL_SEMAPHORE_BLOCK_FOREVER)) {
|
2016-11-30 02:21:48 -04:00
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
// lots of retries during probe
|
|
|
|
_dev->set_retries(10);
|
|
|
|
|
|
|
|
_measure();
|
|
|
|
hal.scheduler->delay(10);
|
|
|
|
_collect();
|
|
|
|
|
|
|
|
_dev->get_semaphore()->give();
|
2013-10-29 00:55:23 -03:00
|
|
|
|
2016-11-30 02:21:48 -04:00
|
|
|
found = (_last_sample_time_ms != 0);
|
|
|
|
if (found) {
|
|
|
|
printf("MS4525: Found sensor on bus %u address 0x%02x\n", addresses[i].bus, addresses[i].addr);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (!found) {
|
|
|
|
printf("MS4525: no sensor found\n");
|
2013-10-29 00:55:23 -03:00
|
|
|
return false;
|
2016-01-29 07:38:33 -04:00
|
|
|
}
|
2013-10-29 00:55:23 -03:00
|
|
|
|
2016-10-31 06:48:22 -03:00
|
|
|
// drop to 2 retries for runtime
|
|
|
|
_dev->set_retries(2);
|
|
|
|
|
2016-11-30 02:21:48 -04:00
|
|
|
_dev->register_periodic_callback(20000,
|
2017-01-13 15:26:14 -04:00
|
|
|
FUNCTOR_BIND_MEMBER(&AP_Airspeed_MS4525::_timer, void));
|
2016-11-30 02:21:48 -04:00
|
|
|
return true;
|
2013-09-28 05:40:29 -03:00
|
|
|
}
|
|
|
|
|
|
|
|
// start a measurement
|
2016-11-30 00:59:20 -04:00
|
|
|
void AP_Airspeed_MS4525::_measure()
|
2013-09-28 05:40:29 -03:00
|
|
|
{
|
|
|
|
_measurement_started_ms = 0;
|
2016-07-12 02:56:25 -03:00
|
|
|
uint8_t cmd = 0;
|
|
|
|
if (_dev->transfer(&cmd, 1, nullptr, 0)) {
|
2015-11-19 23:07:00 -04:00
|
|
|
_measurement_started_ms = AP_HAL::millis();
|
2013-09-28 05:40:29 -03:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2017-04-01 21:53:45 -03:00
|
|
|
/*
|
|
|
|
this equation is an inversion of the equation in the
|
|
|
|
pressure transfer function figure on page 4 of the datasheet
|
|
|
|
|
|
|
|
We negate the result so that positive differential pressures
|
|
|
|
are generated when the bottom port is used as the static
|
|
|
|
port on the pitot and top port is used as the dynamic port
|
|
|
|
*/
|
|
|
|
float AP_Airspeed_MS4525::_get_pressure(int16_t dp_raw) const
|
|
|
|
{
|
|
|
|
const float P_max = get_psi_range();
|
|
|
|
const float P_min = - P_max;
|
|
|
|
const float PSI_to_Pa = 6894.757f;
|
|
|
|
|
|
|
|
float diff_press_PSI = -((dp_raw - 0.1f*16383) * (P_max-P_min)/(0.8f*16383) + P_min);
|
|
|
|
float press = diff_press_PSI * PSI_to_Pa;
|
|
|
|
return press;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
convert raw temperature to temperature in degrees C
|
|
|
|
*/
|
|
|
|
float AP_Airspeed_MS4525::_get_temperature(int16_t dT_raw) const
|
|
|
|
{
|
|
|
|
float temp = ((200.0f * dT_raw) / 2047) - 50;
|
|
|
|
return temp;
|
|
|
|
}
|
|
|
|
|
2013-09-28 05:40:29 -03:00
|
|
|
// read the values from the sensor
|
2016-11-30 00:59:20 -04:00
|
|
|
void AP_Airspeed_MS4525::_collect()
|
2013-09-28 05:40:29 -03:00
|
|
|
{
|
|
|
|
uint8_t data[4];
|
2017-03-29 16:07:06 -03:00
|
|
|
uint8_t data2[4];
|
2013-10-29 00:55:23 -03:00
|
|
|
|
2013-09-28 05:40:29 -03:00
|
|
|
_measurement_started_ms = 0;
|
|
|
|
|
2016-07-12 02:56:25 -03:00
|
|
|
if (!_dev->transfer(nullptr, 0, data, sizeof(data))) {
|
2013-09-28 05:40:29 -03:00
|
|
|
return;
|
|
|
|
}
|
2017-03-29 16:07:06 -03:00
|
|
|
// reread the data, so we can attempt to detect bad inputs
|
|
|
|
if (!_dev->transfer(nullptr, 0, data2, sizeof(data2))) {
|
|
|
|
return;
|
|
|
|
}
|
2016-01-29 07:38:33 -04:00
|
|
|
|
2016-09-09 14:32:14 -03:00
|
|
|
uint8_t status = (data[0] & 0xC0) >> 6;
|
2017-03-29 16:07:06 -03:00
|
|
|
// only check the status on the first read, the second read is expected to be stale
|
2016-01-29 07:38:33 -04:00
|
|
|
if (status == 2 || status == 3) {
|
2013-09-28 05:40:29 -03:00
|
|
|
return;
|
2016-01-29 07:38:33 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
int16_t dp_raw, dT_raw;
|
|
|
|
dp_raw = (data[0] << 8) + data[1];
|
|
|
|
dp_raw = 0x3FFF & dp_raw;
|
|
|
|
dT_raw = (data[2] << 8) + data[3];
|
|
|
|
dT_raw = (0xFFE0 & dT_raw) >> 5;
|
|
|
|
|
2017-03-29 16:07:06 -03:00
|
|
|
int16_t dp_raw2, dT_raw2;
|
|
|
|
dp_raw2 = (data2[0] << 8) + data2[1];
|
|
|
|
dp_raw2 = 0x3FFF & dp_raw2;
|
|
|
|
dT_raw2 = (data2[2] << 8) + data2[3];
|
|
|
|
dT_raw2 = (0xFFE0 & dT_raw2) >> 5;
|
|
|
|
|
|
|
|
// reject any values that are the absolute minimum or maximums these
|
|
|
|
// can happen due to gnd lifts or communication errors on the bus
|
|
|
|
if (dp_raw == 0x3FFF || dp_raw == 0 || dT_raw == 0x7FF || dT_raw == 0 ||
|
|
|
|
dp_raw2 == 0x3FFF || dp_raw2 == 0 || dT_raw2 == 0x7FF || dT_raw2 == 0) {
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
// reject any double reads where the value has shifted in the upper more than
|
|
|
|
// 0xFF
|
|
|
|
if (abs(dp_raw - dp_raw2) > 0xFF || abs(dT_raw - dT_raw2) > 0xFF) {
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2017-04-01 21:53:45 -03:00
|
|
|
float press = _get_pressure(dp_raw);
|
|
|
|
float press2 = _get_pressure(dp_raw2);
|
|
|
|
float temp = _get_temperature(dT_raw);
|
|
|
|
float temp2 = _get_temperature(dT_raw2);
|
2016-11-30 02:21:48 -04:00
|
|
|
|
|
|
|
_voltage_correction(press, temp);
|
2017-04-01 21:53:45 -03:00
|
|
|
_voltage_correction(press2, temp2);
|
2016-11-30 02:21:48 -04:00
|
|
|
|
2017-02-18 00:26:58 -04:00
|
|
|
if (sem->take(HAL_SEMAPHORE_BLOCK_FOREVER)) {
|
2017-04-01 21:53:45 -03:00
|
|
|
_press_sum += press + press2;
|
|
|
|
_temp_sum += temp + temp2;
|
|
|
|
_press_count += 2;
|
|
|
|
_temp_count += 2;
|
2016-11-30 02:21:48 -04:00
|
|
|
sem->give();
|
|
|
|
}
|
2016-10-31 06:48:22 -03:00
|
|
|
|
2015-11-19 23:07:00 -04:00
|
|
|
_last_sample_time_ms = AP_HAL::millis();
|
2013-09-28 05:40:29 -03:00
|
|
|
}
|
|
|
|
|
2016-10-31 06:48:22 -03:00
|
|
|
/**
|
|
|
|
correct for 5V rail voltage if the system_power ORB topic is
|
|
|
|
available
|
|
|
|
|
|
|
|
See http://uav.tridgell.net/MS4525/MS4525-offset.png for a graph of
|
|
|
|
offset versus voltage for 3 sensors
|
|
|
|
*/
|
2016-11-30 00:59:20 -04:00
|
|
|
void AP_Airspeed_MS4525::_voltage_correction(float &diff_press_pa, float &temperature)
|
2013-09-28 05:40:29 -03:00
|
|
|
{
|
2016-10-31 06:48:22 -03:00
|
|
|
const float slope = 65.0f;
|
|
|
|
const float temp_slope = 0.887f;
|
2013-10-29 00:55:23 -03:00
|
|
|
|
2016-10-31 06:48:22 -03:00
|
|
|
/*
|
|
|
|
apply a piecewise linear correction within range given by above graph
|
|
|
|
*/
|
|
|
|
float voltage_diff = hal.analogin->board_voltage() - 5.0f;
|
|
|
|
|
|
|
|
voltage_diff = constrain_float(voltage_diff, -0.7f, 0.5f);
|
|
|
|
|
|
|
|
diff_press_pa -= voltage_diff * slope;
|
|
|
|
temperature -= voltage_diff * temp_slope;
|
|
|
|
}
|
|
|
|
|
|
|
|
// 50Hz timer
|
2017-01-13 15:26:14 -04:00
|
|
|
void AP_Airspeed_MS4525::_timer()
|
2016-10-31 06:48:22 -03:00
|
|
|
{
|
2013-09-28 05:40:29 -03:00
|
|
|
if (_measurement_started_ms == 0) {
|
|
|
|
_measure();
|
2017-01-13 15:26:14 -04:00
|
|
|
return;
|
2013-09-28 05:40:29 -03:00
|
|
|
}
|
2015-11-19 23:07:00 -04:00
|
|
|
if ((AP_HAL::millis() - _measurement_started_ms) > 10) {
|
2013-09-28 05:40:29 -03:00
|
|
|
_collect();
|
|
|
|
// start a new measurement
|
|
|
|
_measure();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
// return the current differential_pressure in Pascal
|
2016-11-30 00:59:20 -04:00
|
|
|
bool AP_Airspeed_MS4525::get_differential_pressure(float &pressure)
|
2013-09-28 05:40:29 -03:00
|
|
|
{
|
2015-11-19 23:07:00 -04:00
|
|
|
if ((AP_HAL::millis() - _last_sample_time_ms) > 100) {
|
2013-09-28 05:40:29 -03:00
|
|
|
return false;
|
|
|
|
}
|
2017-02-18 00:26:58 -04:00
|
|
|
if (sem->take(HAL_SEMAPHORE_BLOCK_FOREVER)) {
|
2016-11-30 02:21:48 -04:00
|
|
|
if (_press_count > 0) {
|
|
|
|
_pressure = _press_sum / _press_count;
|
|
|
|
_press_count = 0;
|
|
|
|
_press_sum = 0;
|
|
|
|
}
|
|
|
|
sem->give();
|
|
|
|
}
|
2013-09-28 05:40:29 -03:00
|
|
|
pressure = _pressure;
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
// return the current temperature in degrees C, if available
|
2016-11-30 00:59:20 -04:00
|
|
|
bool AP_Airspeed_MS4525::get_temperature(float &temperature)
|
2013-09-28 05:40:29 -03:00
|
|
|
{
|
2015-11-19 23:07:00 -04:00
|
|
|
if ((AP_HAL::millis() - _last_sample_time_ms) > 100) {
|
2013-09-28 05:40:29 -03:00
|
|
|
return false;
|
|
|
|
}
|
2017-02-18 00:26:58 -04:00
|
|
|
if (sem->take(HAL_SEMAPHORE_BLOCK_FOREVER)) {
|
2016-11-30 02:21:48 -04:00
|
|
|
if (_temp_count > 0) {
|
|
|
|
_temperature = _temp_sum / _temp_count;
|
|
|
|
_temp_count = 0;
|
|
|
|
_temp_sum = 0;
|
|
|
|
}
|
|
|
|
sem->give();
|
|
|
|
}
|
2013-09-28 05:40:29 -03:00
|
|
|
temperature = _temperature;
|
|
|
|
return true;
|
|
|
|
}
|