ardupilot/libraries/AP_Scripting/examples/EFI_tester.lua

185 lines
4.1 KiB
Lua
Raw Normal View History

2022-09-28 02:58:17 -03:00
--[[
simulator for CAN EFI
this can be used with a loopback cable between CAN1 and CAN2 to test CAN EFI Drivers
--]]
local driver2 = CAN.get_device2(25)
if not driver2 then
gcs:send_text(0,string.format("EFISIM: Failed to load CAN driver"))
return
end
local PARAM_TABLE_KEY = 13
local PARAM_TABLE_PREFIX = "EFISIM_"
-- add a parameter and bind it to a variable
function bind_add_param(name, idx, default_value)
assert(param:add_param(PARAM_TABLE_KEY, idx, name, default_value), string.format('could not add param %s', name))
return Parameter(PARAM_TABLE_PREFIX .. name)
end
assert(param:add_table(PARAM_TABLE_KEY, PARAM_TABLE_PREFIX, 1), 'could not add param table')
local EFISIM_TYPE = bind_add_param('TYPE', 1, 0)
function get_time_sec()
return millis():tofloat() * 0.001
end
local FRM_100 = uint32_t(0x100)
local FRM_101 = uint32_t(0x101)
local FRM_102 = uint32_t(0x102)
local FRM_104 = uint32_t(0x104)
local FRM_105 = uint32_t(0x105)
local FRM_106 = uint32_t(0x106)
local FRM_10A = uint32_t(0x10A)
local FRM_10C = uint32_t(0x10C)
local FRM_10D = uint32_t(0x10D)
local FRM_10F = uint32_t(0x10F)
local FRM_113 = uint32_t(0x113)
local FRM_114 = uint32_t(0x114)
local FRM_115 = uint32_t(0x115)
function put_u8(msg, ofs, v)
msg:data(ofs,v&0xFF)
end
function put_u16(msg, ofs, v)
msg:data(ofs,v&0xFF)
msg:data(ofs+1,v>>8)
end
function put_u32(msg, ofs, v)
msg:data(ofs+0,v&0xFF)
msg:data(ofs+1,(v>>8)&0xFF)
msg:data(ofs+2,(v>>16)&0xFF)
msg:data(ofs+3,(v>>24)&0xFF)
end
local rev_counter = 0
--[[
send SkyPower data. Called at 100Hz
--]]
function send_SkyPower(driver)
--local msg = CANFrame()
local t = get_time_sec()
local RPM = 1200 + math.floor(1000*math.sin(t))
rev_counter = rev_counter + (RPM/60.0)*0.01
-- 0x100
local msg = CANFrame()
msg:id(FRM_100)
put_u16(msg,0,RPM)
put_u16(msg,2,13*10) -- ignition angle
put_u16(msg,4,45*10) -- throttle angle
msg:dlc(8)
driver:write_frame(msg, 10000)
-- 0x101
msg = CANFrame()
msg:id(FRM_101)
put_u16(msg,2,917) -- air pressure
msg:dlc(8)
driver:write_frame(msg, 10000)
-- 0x102
msg = CANFrame()
msg:id(FRM_102)
put_u16(msg,0,7*10) -- ingition gap
put_u16(msg,2,270*10) -- injection angle
put_u16(msg,4,37000) -- injection time
msg:dlc(8)
driver:write_frame(msg, 10000)
-- 0x104
msg = CANFrame()
msg:id(FRM_104)
put_u16(msg,0,math.floor(14.8*10)) -- supply voltage
msg:dlc(8)
driver:write_frame(msg, 10000)
-- 0x105
msg = CANFrame()
msg:id(FRM_105)
put_u16(msg,0,172*10) -- engine temp head 1
put_u16(msg,2,65*10) -- air temp
put_u16(msg,4,320*10) -- exhaust temp
put_u16(msg,6,113*10) -- ecu temp
msg:dlc(8)
driver:write_frame(msg, 10000)
-- 0x106
msg = CANFrame()
msg:id(FRM_106)
put_u32(msg,0,math.floor(rev_counter))
put_u8(msg,4,math.floor(t))
put_u8(msg,5,math.floor(t/60))
put_u16(msg,6,math.floor(t/3600))
msg:dlc(8)
driver:write_frame(msg, 10000)
-- 0x10A
msg = CANFrame()
msg:id(FRM_10A)
put_u16(msg,6,72*10) -- target load
msg:dlc(8)
driver:write_frame(msg, 10000)
-- 0x10C
msg = CANFrame()
msg:id(FRM_10C)
put_u16(msg,4,145*10) -- engine head temp 2
put_u16(msg,6,315*10) -- exhaust temp 2
msg:dlc(8)
driver:write_frame(msg, 10000)
-- 0x10D
msg = CANFrame()
msg:id(FRM_10D)
put_u16(msg,4,72*10) -- current load
msg:dlc(8)
driver:write_frame(msg, 10000)
-- 0x10F
msg = CANFrame()
msg:id(FRM_10F)
put_u16(msg,4,2*10) -- fuel consumption
msg:dlc(8)
driver:write_frame(msg, 10000)
-- 0x113
msg = CANFrame()
msg:id(FRM_113)
put_u16(msg,2,1*10) -- gen amps
msg:dlc(8)
driver:write_frame(msg, 10000)
-- 0x114
msg = CANFrame()
msg:id(FRM_114)
put_u16(msg,2,2400*10) -- gen RPM
msg:dlc(8)
driver:write_frame(msg, 10000)
-- 0x115
msg = CANFrame()
msg:id(FRM_115)
put_u16(msg,4,30*100) -- gen current
msg:dlc(8)
driver:write_frame(msg, 10000)
end
function update()
if EFISIM_TYPE:get() == 1 then
send_SkyPower(driver2)
end
return update, 10
end
gcs:send_text(0,string.format("EFISIM: loaded"))
return update()