ardupilot/libraries/AP_MSP/AP_MSP_Telem_DJI.cpp

/*
   This program is free software: you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation, either version 3 of the License, or
   (at your option) any later version.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

#include <AP_Common/AP_FWVersion.h>
#include <AP_Vehicle/AP_Vehicle_Type.h>

#include "AP_MSP.h"
#include "AP_MSP_Telem_DJI.h"

#if HAL_MSP_ENABLED
extern const AP_HAL::HAL& hal;

using namespace MSP;

bool AP_MSP_Telem_DJI::init_uart()
{
    if (_msp_port.uart != nullptr)  {
        _msp_port.uart->set_flow_control(AP_HAL::UARTDriver::FLOW_CONTROL_DISABLE);
        _msp_port.uart->begin(AP_SERIALMANAGER_MSP_BAUD, AP_SERIALMANAGER_MSP_BUFSIZE_RX, AP_SERIALMANAGER_MSP_BUFSIZE_TX);
        return true;
    }
    return false;
}

bool AP_MSP_Telem_DJI::is_scheduler_enabled()
{
    AP_MSP *msp = AP::msp();
    if (msp == nullptr) {
        return false;
    }
    return msp->check_option(AP_MSP::OPTION_TELEMETRY_MODE);
}

void AP_MSP_Telem_DJI::hide_osd_items(void)
{
    AP_MSP *msp = AP::msp();
    if (msp == nullptr) {
        return;
    }
    // apply base class defaults
    AP_MSP_Telem_Backend::hide_osd_items();

    // apply DJI OSD specific rules
    const AP_Notify& notify = AP::notify();
    // default is hide the DJI flightmode widget
    BIT_SET(osd_hidden_items_bitmask, OSD_FLYMODE);

    if (msp->_msp_status.flashing_on) {
        // flash flightmode on failsafe
        if (notify.flags.failsafe_battery || notify.flags.failsafe_gcs || notify.flags.failsafe_radio || notify.flags.ekf_bad) {
            BIT_CLEAR(osd_hidden_items_bitmask, OSD_FLYMODE);
        }
    }
}

uint32_t AP_MSP_Telem_DJI::get_osd_flight_mode_bitmask(void)
{
    uint32_t mode_mask = 0;
    const AP_Notify& notify = AP::notify();

    // set arming status
    if (notify.flags.armed) {
        BIT_SET(mode_mask, DJI_FLAG_ARM);
    }

    // check failsafe
    if (notify.flags.failsafe_battery || notify.flags.failsafe_gcs || notify.flags.failsafe_radio || notify.flags.ekf_bad ) {
        BIT_SET(mode_mask, DJI_FLAG_FS);
    }
    return mode_mask;
}

MSPCommandResult AP_MSP_Telem_DJI::msp_process_out_api_version(sbuf_t *dst)
{
    sbuf_write_u8(dst, MSP_PROTOCOL_VERSION);
    sbuf_write_u8(dst, API_VERSION_MAJOR);
    sbuf_write_u8(dst, API_VERSION_MINOR);
    return MSP_RESULT_ACK;
}

MSPCommandResult AP_MSP_Telem_DJI::msp_process_out_fc_version(sbuf_t *dst)
{
    sbuf_write_u8(dst, FC_VERSION_MAJOR);
    sbuf_write_u8(dst, FC_VERSION_MINOR);
    sbuf_write_u8(dst, FC_VERSION_PATCH_LEVEL);
    return MSP_RESULT_ACK;
}

MSPCommandResult AP_MSP_Telem_DJI::msp_process_out_fc_variant(sbuf_t *dst)
{
    sbuf_write_data(dst, "BTFL", FLIGHT_CONTROLLER_IDENTIFIER_LENGTH);
    return MSP_RESULT_ACK;
}

MSPCommandResult AP_MSP_Telem_DJI::msp_process_out_esc_sensor_data(sbuf_t *dst)
{
#if HAL_WITH_ESC_TELEM
    const auto msp = AP::msp();
    if (msp && (msp->_options & AP_MSP::OPTION_TELEMETRY_DJI_WORKAROUNDS)) {
        AP_ESC_Telem& telem = AP::esc_telem();
        int16_t highest_temperature = 0;
        telem.get_highest_motor_temperature(highest_temperature);
        sbuf_write_u8(dst, uint8_t(highest_temperature / 100));         // deg, report max temperature
        sbuf_write_u16(dst, uint16_t(telem.get_average_motor_rpm() * 0.1f));  // rpm, report average RPM across all motors
    } else {
        return AP_MSP_Telem_Backend::msp_process_out_esc_sensor_data(dst);
    }
#endif
    return MSP_RESULT_ACK;
}

#endif //HAL_MSP_ENABLED